Personal tools

Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card

From SomLabs Wiki

Jump to: navigation, search

Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card


The built system image file can be written to the SD card using the following command:

sudo dd if=<image .raw file> of=/dev/sdX bs=1M

The /dev/sdX shall be changed according to the SD card device name.

In order to run the images from SD card the main board jumpers shall be set as follows (BOOT[0:2] = 101):

Stm32mp1 sd boot jumpers.png
NXP Partner ST Partner Renesas Partner