Personal tools

TitanSBC-8Mmini Datasheet and Pinout

From SomLabs Wiki

Jump to: navigation, search

TitanSBC-8Mmini Datasheet and Pinout


General description

TitanSBC-8Mmini-v13-intro.jpg

The TitanSBC-8Mmini (SLC5) is a new generation single board computer (SBC), based on energy efficient and fast 64-bit quad core industrial, heterogenous MPU NXP i.MX8Mmini, equipped with Cortex-A53 cores.
The main MPU of TitanSBC-8Mmini is equippped with real-time Cortex-M4 core, Gigabit Ethernet interface, video codec (H.265, H.264, VP8, VP9), PCIe 2.0 interface and another communication peripherals often used in industrial applications. Internal GPU offers up to 1080p60 resolution on HDMI interfaces with independent 2D (GC320) and 3D (Vivante GCNano Ultra) GPU engines. The MPU cores run at 1.8GHz without thermal throttling using the stock heat sink allowing a robust and quiet computer. The low-power LPDDR4 RAM memory used by default in TitanSBC-8Mmini computer additionally helps save energy.
The TitanSBC-8Mmini is equipped with on-board 1Gb/s Ethernet interface, half-duplex RS-485 interface, on-board RTC with external battery connector, audio codec (with headphone and microphone Jack connector and external speakers outputs), HDMI, 4 x USB 2.0 host connectors, 1 x USB-OTG connector, MIPI-CSI camera connector, PCIe 2.0 FPC connector (dedicated M.2 adapter available: SL-ADP-PCIe-M2), MicroSD card connector, DC/DC converter adapted to 12V external power supply.
Additionally the TitanSBC-8Mmini SBC is equipped with easy to use 2×20 pin connectors with 28 GPIOs for any use in user application.
The StarSBC-6ULL supports industrial grade embedded applications.

Applications

  • Multimedia Interfaces
  • Home Control Panels
  • Industrial HMI
  • Industrial Controls
  • Home Security and Surveillance
  • Edge Computing
  • IoT Sensor Hubs
  • Home Appliances
  • Home Automation – Smart Home
  • Robotic Appliance
  • Transport Ticketing
  • Smart Lighting
  • Point-of-sales (POS) terminals
  • Cash Register
  • Smart grid infrastructure
  • Outdoor equipment

Features

  • Powered by quad-core heterogenous NXP i.MX8Mmini (Cortex-A53 + Cortex-M4) application processor
  • Core clock up to 1.8GHz
  • Up to 4GB LPDDR4
  • Up to 32GB eMMC
  • HDMI video output (3D + 2D GPUs, full HD resolution)
  • Single MIPI-CSI camera input
  • Half-duplex RS-485 interface on-board
  • 10/100/1000 Ethernet PHY on-board
  • 4 x USB 2.0 (host) + USB-OTG interfaces
  • PCIe 2.0 connector (FPC, 16 pin, 0.5 mm)
  • Stereo audio codec (headphone, microphone and speakres connectors)
  • Power-efficient and cost-optimized solution
  • Ideal for industrial IoT and embedded applications
  • Integrated security features

Pictures of SBC versions

Version Photo
eMMC
TitanSBC-8Mmini-v13-no-cooler.jpg

Ordering info

SLCNX8MMCpuType_Clock_RamSize_FlashSize_SF_TEMP
SLCProduct type
SLC - Single Board Computer
NForm factor
5 - TitanSBC
X8MMCPU Family
X8MM - NXP i.MX8Mmini
CpuTypeCPU Type
QC - Fully featured: 4 x Cortex-A53, 1 x Cortex-M4, GPU3D, video codec
ClockCPU Clock Speed
1600C - 1.6GHz
1800C - 1.8GHz
RamSizeLPDDR4 RAM Size
01GR - 1GB
02GR - 2GB
04GR - 4GB
FlashSizeFlash Size Type and Density
04GE - 4GB eMMC
08GE - 8GB eMMC
16GE - 16GB eMMC
32GE - 32GB eMMC
SFSpecial Features
0SF - Fully equipped
TEMPOperating Temperature
C - Consumer: 0 to +70 C
E - Extended: -25 to +70 C
I - Industrial: -40 to +85 C

Block Diagram

TitanSBC-8Mmini-blokowy.png

Operating ranges

TitanSBC-8Mmini-power.png

Parameter Value Unit Comment
USB Power Supply
5
V
Connected to J7001
External Power Supply
12
V
Connected to J1502
GPIO voltage
3.3
V
-
Environment temperature4
-40…+85
oC Industrial range
-25…+70
Extended range
0…+70
Consumer range

Note:
1. MicroUSB-OTG connector.
2. Power-jack connector compatible with Wuerth Elektronik 694103304002 (1.35 mm).
3. Only one power source can be active at the time (connected to J700 or to J150).
4. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).

Electrical parameters

SBC
signal name
Parameter Value Units
Min. Typ. Max.
EXT PWR SBC external supply voltage1 9 12 14 V
USB PWR SBC supply USB-OTG voltage2 - 5 - V
VGPIO GPIO Input Voltage 0 - 3.63 V
VDD-3V3 Aux power source 3.2 3.3 3.35 V
VDD-5V0 Aux power source 4.65 4.85 5.0 V
I3V3 Max load of aux power source 0 - 100 mA
I5V0 Max load of aux power source 0 - 100 mA
IEXT Total Supply Current TBD TBD TBD mA
I+5V Total Supply Current TBD TBD TBD mA
VBATT RTC/SNVS Backup
Battery Supply
2.66 - 3.6 V

Notes:
1. The external voltage connected to J150 connector.
2. The external voltage connected to J700 connector.
3. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.

External GPIOs

TitanSBC-8Mmini-GPIO.png


Connector pin number Default SBC function Default pin name GPIO MPU ball number Notes
1 VDD-3V3 - - - Power source for external devices (up to 100 mA)
2 VDD-5V0 - - - Power source for external devices (totally up to 100 mA on both VDD-5V0)
3 I2C4-SDA I2C4-SDA GPIO5-IO21 E13 Internally pull-uped with 4.7k connected to 3.3V
4 VDD-5V0 - - - Power source for external devices (totally up to 100 mA on both VDD-5V0)
5 I2C4-SCL I2C4-SCL GPIO5-IO20 D13 Internally pull-uped with 4.7k connected to 3.3V
6 GND - - - -
7 GPIO4-IO13 SAI-TXD1 GPIO4-IO13 AF20 -
8 UART2-TXD UART2-TXD GPIO5-IO24 F15 -
9 GND - - - -
10 UART2-RXD UART2-RXD GPIO5-IO25 E15 -
11 GPIO4-IO12 SAI1-TXD0 GPIO4-IO12 AG20 -
12 PWM2 SPDIF-RX GPIO5-IO04 AG9 -
13 GPIO4-IO09 SAI1-RXD7 GPIO4-IO09 AF19 -
14 GND - - - -
15 GPIO4-IO08 SAI1-RXD6 GPIO4-IO08 AG19 -
16 UART1-RXD SAI1-RXFS GPIO4-IO21 AC19 -
17 VDD-3V3 - - - -
18 UART1-TXD SAI2-RXC GPIO4-IO22 AB22 -
19 ECSPI2-MOSI ECSPI2-MOSI GPIO5-IO11 B8 -
20 GND - - - -
21 ECSPI2-MISO ECSPI2-MISO GPIO5-IO12 A8 -
22 GPIO4-IO7 SAI1-RXD5 GPIO4-IO07 AF18 -
23 ECSPI2-SCLK ECSPI2-SCLK GPIO5-IO10 E6 -
24 ECSPI2-SS0 ECSPI2-SS0 GPIO5-IO13 A6 -
25 GND - - - -
26 GPIO4-IO06 SAI1-RXD4 GPIO4-IO06 AG18 -
27 I2C3-SDA I2C3-SDA GPIO5-IO19 F10 Internally pull-uped with 4.7k connected to 3.3V
28 I2C3-SCL I2C3-SCL GPIO5-IO18 E10 Internally pull-uped with 4.7k connected to 3.3V
29 UART1-CTS SAI2-RXD GPIO4-IO23 AC24 -
30 GND - - - -
31 UART1-RTS SAI2-TXFS GPIO4-IO24 AD23 -
32 GPIO4-IO05 SAI1-RXD3 GPIO4-IO05 AF17 -
33 PWM1 SPDIF-EXT-CLK GPIO5-IO05 AF8 -
34 GND - - - -
35 GPIO4-IO01 SAI1-RXC GPIO4-IO01 AF16 -
36 GPIO4-IO04 SAI1-RXD2 GPIO4-IO04 AG17 -
37 GPIO4-IO02 SAI1-RXD0 GPIO4-IO02 AG15 -
38 GPIO4-IO00 SAI1-RXFS GPIO4-IO00 AG16 -
39 GND - - - -
40 GPIO4-IO03 SAI1-RXD1 GPIO4-IO03 AF15 -

Note:
1. GPIOs are compatible with TTL-LV/CMOS33 voltage levels.
2. Use of internal MPU pull-up resistors is not recommended (ERR050080, Mask Set Errata for Mask 0N87W, Rev. 2, 6/2022).

Serial terminal interface (UART4)

By default the UART4 is used as Linux terminal interface. Both communication lines (TxD and RxD) are compatible with TTL-LV or CMOS33 levels.

TitanSBC-8Mmini-UART-terminal.png

Internal GPIO connections

Default SBC function Default pin name GPIO MPU ball number Description
I2C-18-SCL I2C2-SCL GPIO5-IO16 D10 PMIC, DSI-HDMI converter, internally pull-uped with 4.7k
I2C-18-SDA I2C2-SDA GPIO5-IO17 D9 PMIC, DSI-HDMI converter, internally pull-uped with 4.7k
SYS-LED SD1-DATA0 GPIO2-IO02 Y27 System LED (heartbeat)
UART3-TXEN SAI1-TXD4 GPIO4-IO16 AG22 RS485 (DE in MAX3485)
UART3-RXD UART3-RXD GPIO5-IO26 E18 RS485
UART3-TXD UART3-TXD GPIO5-IO27 D18 RS485
CAM-GPIO0 SD1-CLK GPIO2-IO00 V26 MIPI-CSI (camera input) auxiliary line
CAM-GPIO1 SD1-CMD GPIO2-IO01 V27 MIPI-CSI (camera input) auxiliary line
UART4-RXD UART4-RXD GPIO5-IO28 F19 Console UART
UART4-TXD UART4-TXD GPIO5-IO29 F18 Console UART
PMIC-INT GPIO1-IO01 GPIO1-IO01 AF14 PMIC interrupt
WDOG-B GPIO1-IO02 GPIO1-IO02 AG13 System watchdog input
HDMI-DETECT GPIO1-IO06 GPIO1-IO06 AG11 HDMI detect input
M2H-INT GPIO1-IO07 GPIO1-IO07 AF11 HDMI interrupt
M2H-RESET GPIO1-IO09 GPIO1-IO09 AF10 HDMI converter reset
SPDIF-TX SPDIF-TX GPIO5-IO03 AF9 HDMI audio output
USB1-VBUS-EN GPIO1-IO12 GPIO1-IO12 AB10 USB control line
USB1-VBUS-OC GPIO1-IO13 GPIO1-IO13 AD9 USB control line
USB2-VBUS-EN GPIO1-IO14 GPIO1-IO14 AC9 USB control line
USB2-VBUS-OC GPIO1-IO15 GPIO1-IO15 AB9 USB control line
USB-RESET SAI3-RXFS GPIO4-IO28 AG8 USB hub reset
RTC-INT SAI3-RXC GPIO4-IO29 AG7 RTC interrupt
I2C-33-SCL I2C1-SCL GPIO5-IO14 E9 RTC, audio codec, HDMI-DDC, PCIe, MIPI-CSI
I2C-33-SDA I2C1-SDA GPIO5-IO15 F9 RTC, audio codec, HDMI-DDC, PCIe, MIPI-CSI
SAI3-MCLK SAI3-MCLK GPIO4-IO02 AD6 Audio codec MCLK line
SAI3-TXC SAI3-TXC GPIO5-IO00 AG6 Audio codec BCLK line
SAI3-TXFS SAI3-TXFS GPIO4-IO31 AC6 Audio codec FS line
SAI3-TXD SAI3-TXD GPIO5-IO01 AF6 Audio codec DACIN line
SAI3-RXD SAI3-RXD GPIO4-IO30 AF7 Audio codec ADCOUT line
ENET-INT ECSPI1-SCLK GPIO5-IO06 D6 Ethernet PHY interrput
ENET-PHY-RESET SAI1-TXD2 GPIO4-IO14 AG21 Ethernet PHY reset
ENET1-RXC ENET1-RXC GPIO1-IO25 AE26 Ethernet PHY
ENET1-RX-CTL ENET1-RX-CTL GPIO1-IO24 AF27 Ethernet PHY
ENET1-RXD3 ENET1-RXD3 GPIO1-IO29 AC26 Ethernet PHY
ENET1-RXD2 ENET1-RXD2 GPIO1-IO28 AD26 Ethernet PHY
ENET1-RXD1 ENET1-RXD1 GPIO1-IO27 AD27 Ethernet PHY
ENET1-RXD0 ENET1-RXD0 GPIO1-IO26 AE27 Ethernet PHY
ENET1-TXC ENET1-TXC GPIO1-IO23 AG24 Ethernet PHY
ENET1-TXD3 ENET1-TXD3 GPIO1-IO18 AF25 Ethernet PHY
ENET1-TXD2 ENET1-TXD2 GPIO1-IO19 AG25 Ethernet PHY
ENET1-TXD1 ENET1-TXD1 GPIO1-IO20 AF26 Ethernet PHY
ENET1-TXD0 ENET1-TXD0 GPIO1-IO21 AG26 Ethernet PHY
ENET1-TX-CTL ENET1-TX-CTL GPIO1-IO22 AF24 Ethernet PHY
ENET1-MDC ENET1-MDC GPIO1-IO16 AC27 Ethernet PHY
ENET1-MDIO ENET1-MDIO GPIO1-IO17 AB27 Ethernet PHY
SDIO-VSELECT GPIO1-IO04 GPIO1-IO04 AG12 MicroSD card - NVCC-SD2 voltage selector 1.8/3.3V
SD2-CLK SD2-CLK GPIO2-IO13 W23 MicroSD card
SD2-CMD SD2-CMD GPIO2-IO14 W24 MicroSD card
SD2-DATA0 SD2-DATA0 GPIO2-IO15 AB23 MicroSD card
SD2-DATA1 SD2-DATA1 GPIO2-IO16 AB24 MicroSD card
SD2-DATA2 SD2-DATA2 GPIO2-IO17 V24 MicroSD card
SD2-DATA3 SD2-DATA3 GPIO2-IO18 V23 MicroSD card
SD2-CD SD2-CD GPIO2-IO12 AA26 MicroSD card

Audio codec and amplifiers

The TitanSBC-8Mmini is equipped with 24-bit audio codec (NAU88C22YG). The NAU88C22YG includes drivers for speaker, headphone, and differential or stereo line outputs, and integrates preamps for stereo differential microphones, significantly reducing external component requirements.

TitanSBC-8Mmini-audio-codec.png
Default SBC function Default pin name GPIO MPU ball number Description
SAI3-MCLK SAI3-MCLK GPIO4-IO02 AD6 Audio codec MCLK line
SAI3-TXC SAI3-TXC GPIO5-IO00 AG6 Audio codec BCLK line
SAI3-TXFS SAI3-TXFS GPIO4-IO31 AC6 Audio codec FS line
SAI3-TXD SAI3-TXD GPIO5-IO01 AF6 Audio codec DACIN line
SAI3-RXD SAI3-RXD GPIO4-IO30 AF7 Audio codec ADCOUT line

Note:
1. Codec is configured with I2C1 MPU interface.

Hub USB

The TitanSBC-8Mmini is equipped with on-board 4 channel USB hub, based on GL852G MTT controller.

TitanSBC-8Mmini-hub-usb.png
Default SBC function Default pin name GPIO MPU ball number Description
USB2-VBUS-EN GPIO1-IO14 GPIO1-IO14 AC9 USB control line
USB2-VBUS-OC GPIO1-IO15 GPIO1-IO15 AB9 USB control line
USB-RESET SAI3-RXFS GPIO4-IO28 AG8 USB hub reset

Ethernet interface

The TitanSBC-8Mmini is equipped with on-board 10/100/1000Mb/s Ethernet interface.

TitanSBC-8Mmini-ethernet.png
Default SBC function Default pin name GPIO MPU ball number Description
ENET-INT ECSPI1-SCLK GPIO5-IO06 D6 Ethernet PHY interrput
ENET-PHY-RESET SAI1-TXD2 GPIO4-IO14 AG21 Ethernet PHY reset
ENET1-RXC ENET1-RXC GPIO1-IO25 AE26 Ethernet PHY
ENET1-RX-CTL ENET1-RX-CTL GPIO1-IO24 AF27 Ethernet PHY
ENET1-RXD3 ENET1-RXD3 GPIO1-IO29 AC26 Ethernet PHY
ENET1-RXD2 ENET1-RXD2 GPIO1-IO28 AD26 Ethernet PHY
ENET1-RXD1 ENET1-RXD1 GPIO1-IO27 AD27 Ethernet PHY
ENET1-RXD0 ENET1-RXD0 GPIO1-IO26 AE27 Ethernet PHY
ENET1-TXC ENET1-TXC GPIO1-IO23 AG24 Ethernet PHY
ENET1-TXD3 ENET1-TXD3 GPIO1-IO18 AF25 Ethernet PHY
ENET1-TXD2 ENET1-TXD2 GPIO1-IO19 AG25 Ethernet PHY
ENET1-TXD1 ENET1-TXD1 GPIO1-IO20 AF26 Ethernet PHY
ENET1-TXD0 ENET1-TXD0 GPIO1-IO21 AG26 Ethernet PHY
ENET1-TX-CTL ENET1-TX-CTL GPIO1-IO22 AF24 Ethernet PHY
ENET1-MDC ENET1-MDC GPIO1-IO16 AC27 Ethernet PHY
ENET1-MDIO ENET1-MDIO GPIO1-IO17 AB27 Ethernet PHY

HDMI output

The TitanSBC-8Mmini is equipped with on-board MIPI-DSI to HDMI converter.

TitanSBC-8Mmini-HDMI.png
Default SBC function Default pin name GPIO MPU ball number Description
HDMI-DETECT GPIO1-IO06 GPIO1-IO06 AG11 HDMI detect input
M2H-INT GPIO1-IO07 GPIO1-IO07 AF11 HDMI interrupt
M2H-RESET GPIO1-IO09 GPIO1-IO09 AF10 HDMI converter reset
SPDIF-TX SPDIF-TX GPIO5-IO03 AF9 HDMI audio output

Note:
1. HDMI converter (LT8912B) is configured with I2C1 MPU interface.

Camera input

The TitanSBC-8Mmini is equipped with on-board MIPI-CSI camera input. The MIPI-CSI connector is FPC30 type and is fully compatible with SL-MIPI-CSI-OV5640 SoMLabs camera module.

TitanSBC-8Mmini-CSI.png
Default SBC function Default pin name GPIO MPU ball number Description
CAM-GPIO0 SD1-CLK GPIO2-IO00 V26 MIPI-CSI auxiliary line
CAM-GPIO1 SD1-CMD GPIO2-IO01 V27 MIPI-CSI auxiliary line


Connector pin number Function
1 GND
2 CSI-CLK_p
3 CSI-CLK_n
4 GND
5 CSI-DATA0_p
6 CSI-DATA0_n
7 GND
8 CSI-DATA1_p
9 CSI-DATA1_n
10 GND
11 CSI-DATA2_p
12 CSI-DATA2_n
13 GND
14 CSI-DATA3_p
15 CSI-DATA3_n
16 GND
17 I2C-33-SCL (I2C1)
18 I2C-33-SDA (I2C1)
19 GND
20 CAM-GPIO0
21 CAM-GPIO1
22 -
23 GND
24 3.3V
25 3.3V
26 5.0V
27 5.0V
28 -
29 -
30 GND

Note:
1. External camera module is configured with I2C1 MPU interface.
2. MIPI-CSI data and clock lines are swapped (P/N).This must be reflected in driver. MIPI-CSI PHY supports data/clock lane polarity swap via register settings.

RS-485 interface

The TitanSBC-8Mmini is equipped with RS-485 half-duplex transceiver (MAX3485CSA or compatible).

TitanSBC-8Mmini-RS485.png
Default SBC function Default pin name GPIO MPU ball number Description
UART3-TXEN SAI1-TXD4 GPIO4-IO16 AG22 RS485 (DE in MAX3485)
UART3-RXD UART3-RXD GPIO5-IO26 E18 RS485
UART3-TXD UART3-TXD GPIO5-IO27 D18 RS485

MicroSD card connector

The TitanSBC-8Mmini is equipped with MicroSD card connector (mounted on the bottom side of the board), connected to SDHC2 channel of MPU.
The power supply voltage of MicroSD card can be selected: 1.8V or 3.3V with SDIO-VSELECT line.

TitanSBC-8Mmini-MicroSD.png
Default SBC function Default pin name GPIO MPU ball number Description
SDIO-VSELECT GPIO1-IO04 GPIO1-IO04 AG12 MicroSD card - NVCC-SD2 voltage selector 1.8/3.3V
SD2-CLK SD2-CLK GPIO2-IO13 W23 MicroSD card
SD2-CMD SD2-CMD GPIO2-IO14 W24 MicroSD card
SD2-DATA0 SD2-DATA0 GPIO2-IO15 AB23 MicroSD card
SD2-DATA1 SD2-DATA1 GPIO2-IO16 AB24 MicroSD card
SD2-DATA2 SD2-DATA2 GPIO2-IO17 V24 MicroSD card
SD2-DATA3 SD2-DATA3 GPIO2-IO18 V23 MicroSD card
SD2-CD SD2-CD GPIO2-IO12 AA26 MicroSD card


PCIe connector

The TitanSBC-8Mmini is equipped with PCIe connector (mounted on the bottom side of the board). The connector is FPC16 type, compatible with SoMLabs SL-ADP-PCIe-M2 adapter (M.2 key M to PCIe adapter compatible with 2242, 2260 and 2280 modules equipped with single lane interface).

TitanSBC-8Mmini-PCIe-pin1.png
Connector pin number Function
1 GND
2 PCIE-RXN_p
3 PCIE-RXN_n
4 GND
5 PCIE-TXN_p
6 PCIE-TXN_n
7 GND
8 PCIE-CLK_p
9 PCIE-CLK_n
10 GND
11 I2C-33-SCL (I2C1)
12 I2C-33-SDA (I2C1)
13 3.3V
14 3.3V
15 5.0V
16 5.0V

Note:
1. PCIe module can be configured with I2C1 (I2C-33-SDA/-SCL) MPU interface.
2. Lines PCIE-CLK_n/_p and PCIE-TXN_n/_p are separated on-board with 100nF capacitors.
3. Lines of I2C1 interface are pull-uped with 4.7k resistors.

Power supply

TitanSBC-8Mmini-power-supply.png


The TitanSBC-8Mmini has two alternative power supply ports: 9-12VDC (power-jack connector, Wuerth Elektronik 694103304002, 1.35 mm) or 5VDC (USB-OTG).

RTC and external battery connection

The TitanSBC-8Mmini is equipped with RTC (PCF85263ATT) connected to I2C1 MPU interface (I2C-33-SCL/-SDA).
The value of the VBATT voltage should be in range 2.66-3.6V.

TitanSBC-8Mmini-RTCBAT.png
Default SBC function Default pin name GPIO MPU ball number Description
RTC-INT SAI3-RXC GPIO4-IO29 AG7 RTC interrupt
I2C-33-SCL I2C1-SCL GPIO5-IO14 E9 RTC, audio codec, HDMI-DDC, PCIe, MIPI-CSI
I2C-33-SDA I2C1-SDA GPIO5-IO15 F9 RTC, audio codec, HDMI-DDC, PCIe, MIPI-CSI

RECOVERY pushbutton

The TitanSBC-8Mmini is equipped with pushbutton that forces the system to start procedure of downloading the image to the Flash memory mode after system reset.

TitanSBC-8Mmini-BOOT.png

Dimensions

TitanSBC-8Mmini-dimensions.png
NXP Partner ST Partner Renesas Partner