Personal tools

VisionCB-6ULL-IND v.1.0 Datasheet and Pinout

From SomLabs Wiki

Jump to: navigation, search

VisionCB-6ULL-IND v.1.0 Datasheet and Pinout


General description

VisionCB-IND-1-4-1k.png

VisionCB-6ULL-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector.

Applications

  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid Infrastructure
  • IoT gateways
  • Residential getaways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment

Features

  • Industrial grade Carrier Board (Base Board) compatible with the VisionSOM family of modules based on NXP i.MX 6UL / 6ULL application processors
  • Core clock up to 696MHz (VisionSOM-6UL) or up to 900MHz (VisionSOM-6ULL)
  • Up to 512MB SDRAM DDR3L (depends on used VisionSOM module)
  • Up to 512MB NAND Flash / 32GB eMMC / uSD memory card (depends on used VisionSOM module)
  • Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.1+EDR module
  • SoM Interface: SODIMM200
  • Expansion Connectors:
    • 2x25 Pin Headers (Female)
  • Communication Connectors:
    • 1x Ethernet 10/100Mbit/s, RJ45
    • 2x USB Host Type A connectors
  • Display Interface: 50-pin FFC/FPC Parallel RGB – 24-bit, (1366 x 768 Max. Resolution)
  • Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)
  • Power Supply
    • Terminal block connector: Input Voltage 9-12V DC
  • Temperature Range: -40 to +85°C
  • Board Size: 98mm x 79mm x 22mm

Pictures of VisionCB-6ULL-IND board

Version Photo
VisionCB-6ULL-IND board only
VisionCB-IND-1-4-1k.png
VisionCB-6ULL-IND board with VisionSOM-6ULL
VisionCB-IND-1-4-z-SOM-1k.png

Ordering info

VisionCB-6ULL-IND v.1.0

Block Diagram

CB-IND-blokowy-1-4.png

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply (Con100 input) 9.0 11.0 12.0 V Polarized terminal block connector
Supply current - - 0.15 A Excluding LCD, USB and antoher external loads
Output GPIO voltage (Con1) 0 - 3.3 V GPIO connector (current limited; max <250mA [RMS])

Onboard LEDs

VisionCB-IND-1-4-LEDs.png


LED Color Description
LED100 (PWR) Green Power indicator
LED200 (USB OVR) Red USB Overcurrent indicator

2x25 pin header

VisionCB-IND-1-4-GPIO.png


J504 Pin Default function name Description
1 CSI-HSYNC Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
2 CSI-VSYNC Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
3 CSI-DATA0 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
4 CSI-DATA2 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
5 CSI-DATA1 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
6 CSI-DATA3 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
7 CSI-DATA4 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
8 CSI-DATA5 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
9 CSI-MCLK Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
10 CSI-DATA7 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
11 CSI_PIXCLK Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
12 CSI-DATA6 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
13 ENET2_TXD0 Default: ENET2 TXD0 line or universal GPIO with 3.3V logic levels.
14 UART3-RTS Default: UART3 RTS line or universal GPIO with 3.3V logic levels.
15 ENET2_TXEN Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels.
16 UART2-RTS Default: UART2 RTS line or universal GPIO with 3.3V logic levels.
17 ENET2_CRS_DV Default: ENET2 CRS_DV line or universal GPIO with 3.3V logic levels.
18 UART3-CTS Default: UART3 CTS line or universal GPIO with 3.3V logic levels.
19 ENET2_RXD1 Default: ENET2 RXD1 line or universal GPIO with 3.3V logic levels.
20 UART1-RTS Default: UART1 RTS line or universal GPIO with 3.3V logic levels.
21 ENET2_RXER Default: ENET2 RXER line or universal GPIO with 3.3V logic levels.
22 UART2-CTS Default: UART2 CTS line or universal GPIO with 3.3V logic levels.
23 ENET2_TX_CLK Default: ENET2 TX_CLK line or universal GPIO with 3.3V logic levels.
24 UART1-CTS Default: UART1 CTS line or universal GPIO with 3.3V logic levels.
25 UART4-RXD Default: UART4 RXD input or universal GPIO with 3.3V logic levels.
26 JTAG-TCK Default: JTAG TCK input or universal GPIO with 3.3V logic levels.
27 UART4-TXD Default: UART4 TXD output or universal GPIO with 3.3V logic levels.
28 JTAG-nTRST JTAG TRST input line (active L).
29 UART3-RXD Default: UART3 RxD input or universal GPIO with 3.3V logic levels.
30 JTAG-TMS Default: JTAG TMS output or universal GPIO with 3.3V logic levels.
31 UART2-RXD Default: UART2 RXD input or universal GPIO with 3.3V logic levels.
32 SNVS-TAMPER2 Tamper input (SNVS power domain) or GPIO 3.3V.
33 UART2-TXD Default: UART2 TXD input or universal GPIO with 3.3V logic levels.
34 SNVS-TAMPER3 Tamper input (SNVS power domain) or GPIO 3.3V.
35 UART1-RXD Default: UART1 RXD input or universal GPIO with 3.3V logic levels.
36 SNVS-TAMPER4 Tamper input (SNVS power domain) or GPIO 3.3V.
37 UART1-TXD Default: UART1 TXD input or universal GPIO with 3.3V logic levels.
38 SNVS-TAMPER5 Tamper input (SNVS power domain) or GPIO 3.3V.
39 SNVS-TAMPER0 Tamper input (SNVS power domain) or GPIO 3.3V.
40 I2C-SCL Universal GPIO with 3.3V logic levels.
41 SNVS-TAMPER1 Tamper input (SNVS power domain) or GPIO 3.3V.
42 I2C-SDA Universal GPIO with 3.3V logic levels.
43 GPIO5 Default: General purpose pin GPIO5
44 JTAG-TDI Default: JTAG TDI input or universal GPIO with 3.3V logic levels.
45 GPIO8 Default: General purpose pin GPIO8
46 GPIO9 Default: General purpose pin GPIO9
47 VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
48 GND Ground
49 VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
50 GND Ground

TFT LCD connector (RGB 24b, J405)

VisionCB-IND-1-4-lcd.png


J400 pin Default function name LCD interface name
1 LCD-DATA0 LCD-B0
2 LCD-DATA1 LCD-B1
3 LCD-DATA2 LCD-B2
4 LCD-DATA3 LCD-B3
5 LCD-DATA4 LCD-B4
6 LCD-DATA5 LCD-B5
7 LCD-DATA6 LCD-B6
8 LCD-DATA7 LCD-B7
9 GND GND
10 LCD-DATA8 LCD-G0
11 LCD-DATA9 LCD-G1
12 LCD-DATA10 LCD-G2
13 LCD-DATA11 LCD-G3
14 LCD-DATA12 LCD-G4
15 LCD-DATA13 LCD-G5
16 LCD-DATA14 LCD-G6
17 LCD-DATA15 LCD-G7
18 GND GND
19 LCD-DATA16 LCD-R0
20 LCD-DATA17 LCD-R1
21 LCD-DATA18 LCD-R2
22 LCD-DATA19 LCD-R3
23 LCD-DATA20 LCD-R4
24 LCD-DATA21 LCD-R5
25 LCD-DATA22 LCD-R6
26 LCD-DATA23 LCD-R7
27 GND GND
28 LCD-DE DE
29 LCD-HSYNC HSYNC
30 LCD-VSYNC VSYNC
31 GND GND
32 LCD-PCLK DCLK
33 GND GND
34 GPIO4 TS-YPUL
35 GPIO3 TS-YNUR
36 GPIO2 TS-YPLL
37 GPIO1 TS-YNLR
38 - -
39 - -
40 - -
41 - -
42 UART5-TXD I2C-SCL
43 UART5-RXD I2C-SDA
44 GND GND
45 VCC-LCD +3.3V (controlled by ENET2_TXEN)
46 VCC-LCD +3.3V (controlled by ENET2_TXEN)
47 VCC-5V0 +5.0V
48 VCC-5V0 +5.0V
49 LCD-RESET RESET
50 JTAG-nTRST PWREN

Dimensions

VisionCB-IND-1-4-PCB-size.png