Personal tools

VisionCB-STM32MP1-STD Datasheet and Pinout

From SomLabs Wiki

Jump to: navigation, search

VisionCB-STM32MP1-STD v.1.1 Datasheet and Pinout


General description

VisionCB-STM32MP1-STD-v10.png

VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics STM32MP15x application processors (single or dual core ARM Cortex-A7 + internal microcontroller Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as debugger, USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM200 connector. VisionCB-STM32MP1-STD is equippped with internal ST-Link/v2-1 debugger with SWD interface and serial USB console port.


Applications

  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid Infrastructure
  • IoT gateways
  • Residential getaways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment

Features

  • Carrier Board (Base Board) compatible with the VisionSOM-STM32MP1 family of modules based on STMicroelectronics STM32MP15x application processors
  • SoM Interface: SODIMM200
  • Debug Interface: built-in ST-Link/v2-1 SWD debugger
  • Expansion Connectors:
    • Raspberry Pi compatible connectors 2x20 Pin Header (Male)
    • Universal 2x20 Pin Header (Male)
    • MicroSD card socket
  • Communication Connectors:
    • 1x Ethernet 10/100Mbit/s, RJ45
    • 1x USB Host Type A connectors
    • 1x USB OTG Micro AB connector
    • 1x Console MicroUSB B connector
  • Display Interface:
    • 50-pin FFC/FPC Parallel RGB – 24-bit
    • 30-pin FFC/FPC MIPI-DSI
  • User Interface:
    • 3 Pushbuttons
    • 5 LEDs
  • Boot selector
    • External Power Supply 9-12V DC
    • Temperature Range: 0 to +70°C
  • Board Size: 160mm x 100mm x 17mm

Pictures of VisionCB-STM32MP1-STD v1.1 board

Version Photo
VisionCB-STM32MP1-STD v1.1 board only
VisionCB-STM32MP1-STD-v10.png

Ordering info

VisionCB-STM32MP1-STD v1.1

Block Diagram

VisionCB-STM32MP1-STD-v11 block.png

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply 9.0 12.0 15.0 V Positive pole on central connector of J102
Supply current - - 0.15 A Excluding LCD, USB and antoher external loads
LCD Power Supply 3.25 3.4 3.5 V Optionally 5V
MicroSD Card Power Supply 3.15 3.3 3.45 V -
GPIO voltage 3.3 V -

Boot Selector

VisionCB-STM32MP1-STD-v11 boot.png
BOOTx Boot Mode Description
BOOT2 BOOT1 BOOT0
0 0 0 UART and USB Wait incoming connection on:
- USART2/3/6 and UART4/5/7/8 on default pins
- USB high-speed device
0 0 1 Serial NOR Flash Not used on VisionSOM-STM32MP1
0 1 0 eMMC eMMC on SDMMC2
0 1 1 NAND Flash Not used on VisionSOM-STM32MP1
1 0 0 - Not used on VisionSOM-STM32MP1
1 0 1 SD card SD card on SDMMC1
1 1 0 UART and USB Wait incoming connection on:
- USART2/3/6 and UART4/5/7/8 on default pins
- USB high-speed device on OTG_HS_DP/DM pins
1 1 1 Serial NAND Flash Not used on VisionSOM-STM32MP1


By default BOOT2...BOOT0 lines are pulled-down with 1k resistors


Raspberry Pi compatible I/O header

VisionCB-STM32MP1-STD-v11 rpi.png


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 +5V +5V generated by carrier board built-in DC/DC converter
3 DSI-I2C-SDA I2C4 SDA line
4 +5V +5V generated by carrier board built-in DC/DC converter
5 DSI-I2C-SCL I2C4 SCL line
6 GND -
7 UART8-CTS Default: UART8 CTS line or universal GPIO with 3.3V logic levels
8 UART3-TXD Default: UART3 TXD line or universal GPIO with 3.3V logic levels
9 GND -
10 UART3-RXD Default: UART3 RXD line or universal GPIO with 3.3V logic levels
11 UART8-RTS Default: UART8 RTS line or universal GPIO with 3.3V logic levels
12 GPIO-PD12 Shared with switch S100/10k pullup
13 - -
14 GND -
15 - -
16 GPIO-PD11 Shared with switch S101/10k pullup
17 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
18 GPIO-PG12 Shared with user LED (D102, yellow)
LED is buffered by logic inverter
19 LCD-R6 (DATA22) PA8 GPIO line
SPI3 MOSI
20 GND -
21 LCD-B3 (DATA3) PD10 GPIO line
SPI3 MISO
22 GPIO-PA12 Shared with user LED (D100, green)
LED is buffered by logic inverter
23 LCD-R2 (DATA18) PC10 GPIO line
SPI3 SCK
24 GPIO-PA11 Shared with user LED (D101, red)
LED is buffered by logic inverter
25 GND -
26 USART6-RXD Default: UART6 RXD line or universal GPIO with 3.3V logic levels
27 - -
28 - -
29 DSI-BL-PWM PD15 GPIO line
TIM4 CH4 PWM output
30 GND -
31 GPIO-PB1-ADC1-5 Universal GPIO line with 3.3V logic levels or ADC input
32 USART6-TXD Default: UART6 TXD line or universal GPIO with 3.3V logic levels
33 GPIO-PC0-ADC1-10 Universal GPIO line with 3.3V logic levels or ADC input
34 GND -
35 GPIO-PC3-ADC1-13 Universal GPIO line with 3.3V logic levels or ADC input
36 GPIO-PA13 Shared with PHY Ethernet controller interrupt line
37 GPIO-PA0-ADC1-16 Universal GPIO line with 3.3V logic levels or ADC input
38 GPIO-PB6 Universal GPIO with 3.3V logic levels
39 GND -
40 GPIO-PF10 Universal GPIO with 3.3V logic levels

Universal I/O header

VisionCB-STM32MP1-STD-v11 uniio.png


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
3 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
4 LCD-B7 (DATA7) PB9 - universal GPIO with 3.3V logic levels
5 SD2-CLK PE3 - universal GPIO with 3.3V logic levels
6 LCD-B2 (DATA2) PD6 - universal GPIO with 3.3V logic levels
7 SD2-CMD PG6 - universal GPIO with 3.3V logic levels
8 LCD-VSYNC PA4 - universal GPIO with 3.3V logic levels
9 SD2-DATA0 PB14 - universal GPIO with 3.3V logic levels
10 LCD-HSYNC PC6 - universal GPIO with 3.3V logic levels
11 SD2-DATA1 PB15 - universal GPIO with 3.3V logic levels
12 LCD-B4 (DATA4) PE12 - universal GPIO with 3.3V logic levels
13 SD2-DATA2 PB3 - universal GPIO with 3.3V logic levels
14 LCD-B3 (DATA3) PD10 - universal GPIO with 3.3V logic levels
MISO line of SPI3
15 SD2-DATA3 PB4 - universal GPIO with 3.3V logic levels

On the carrier board 1.1 incorrectly marked as PD10

16 LCD-G2 (DATA10) PA6 - universal GPIO with 3.3V logic levels
17 LCD-B6 (DATA6) PB8 - universal GPIO with 3.3V logic levels
18 LCD-G4 (DATA12) PB10 - universal GPIO with 3.3V logic levels
19 LCD-B5 (DATA5) PA3 - universal GPIO with 3.3V logic levels
20 LCD-G3 (DATA11) PE11 - universal GPIO with 3.3V logic levels
21 LCD-G6 (DATA14) PC7 - universal GPIO with 3.3V logic levels

On the carrier board 1.1 incorrectly marked as PC2

22 LCD-G7 (DATA15) PG8 - universal GPIO with 3.3V logic levels
23 LCD-G5 (DATA13) PF11 - universal GPIO with 3.3V logic levels
24 LCD-R4 (DATA20) PA5 - universal GPIO with 3.3V logic levels
25 LCD-R2 (DATA18) PC10 - universal GPIO with 3.3V logic levels
SCK line of SPI3
26 LCD-R3 (DATA19) PB0 - universal GPIO with 3.3V logic levels
27 LCD-R6 (DATA22) PA8 - universal GPIO with 3.3V logic levels
MOSI line of SPI3
28 LCD-R7 (DATA23) PE15 - universal GPIO with 3.3V logic levels

On the carrier board 1.1 incorrectly marked as GND

29 LCD-R5 (DATA21) PA9 - universal GPIO with 3.3V logic levels
30 LCD-DE PE13 - universal GPIO with 3.3V logic levels
31 GPIO-PC2 PC2 - universal GPIO with 3.3V logic levels
32 LCD-PCLK PE14 - universal GPIO with 3.3V logic levels
33 GPIO-PA14 PA14 - universal GPIO with 3.3V logic levels
34 LCD-RESET/DSI-RESET PA1 - universal GPIO with 3.3V logic levels
35 PWR-ON Function depends on LPCFG configuration (output)
36 PWR-LP Low power mode signalling output
37 GND -
38 GND -
39 GND -
40 GND -

User Interface (switches and LEDs)

VisionCB-STM32MP1-STD-v11 user-led.png


User switches

Switch GPIO Description
S100 (left) PD12 10k pull-up
S101 (right) PD11 10k pull-up


User LEDs

LED GPIO Description
D100 PA12 LED is buffered by logic inverter
D101 PA11 LED is buffered by logic inverter
D102 PG12 LED is buffered by logic inverter

Console Port

VisionCB-STM32MP1-STD-v11 usb-cons.png

Linux console port uses vCOM interface provided by ST-Link/v2-1.


MPU Port GPIO Description
UART4-TXD PG11 -
UART4-RXD PB2 -

LCD Parallel Connector

VisionCB-STM32MP1-STD-v11 lcd-par.png


Pin Default function name Description
1 LCD-B0 (DATA0) Internally connected to GND
2 LCD-B1 (DATA1) Internally connected to GND
3 LCD-B2 (DATA2) Connected to PD6
4 LCD-B3 (DATA3) Connected to PD10
5 LCD-B4 (DATA4) Connected to PE12
6 LCD-B5 (DATA5) Connected to PA3
7 LCD-B6 (DATA6) Connected to PB8
8 LCD-B7 (DATA7) Connected to PB9
9 GND -
10 LCD-G0 (DATA8) Internally connected to GND
11 LCD-G1 (DATA9) Internally connected to GND
12 LCD-G2 (DATA10) Connected to PA6
13 LCD-G3 (DATA11) Connected to PE11
14 LCD-G4 (DATA12) Connected to PB10
15 LCD-G5 (DATA13) Connected to PF11
16 LCD-G6 (DATA14) Connected to PC7
17 LCD-G7 (DATA15) Connected to PG8
18 GND -
19 LCD-R0 (DATA16) Internally connected to GND
20 LCD-R1 (DATA17) Internally connected to GND
21 LCD-R2 (DATA18) Connected to PC10
22 LCD-R3 (DATA19) Connected to PB0
23 LCD-R4 (DATA20) Connected to PA5
24 LCD-R5 (DATA21) Connected to PA9
25 LCD-R6 (DATA22) Connected to PA8
26 LCD-R7 (DATA23) Connected to PE15
27 GND -
28 LCD-DE Connected to PE13
29 LCD-HSYNC Connected to PC6
30 LCD-VSYNC Connected to PA4
31 GND -
32 LCD-PCLK Connected to PE14
33 GND -
34 - -
35 - -
36 TP-INT Connected to PA14 line
4,7k pull-up
37 PWM Connected to PD15 line
PWM backlight brightness adjustment
Channel 4 of TIM4 (PWM)
38 - -
39 - -
40 - -
41 - -
42 I2C4_SCL Connected to PE2 line
4,7k pull-up
43 I2C4_SDA Connected to PB7 line
4,7k pull-up
44 GND
45 +3.3V LCD logic power supply
46 +3.3V LCD logic power supply
47 +3.3V LCD backlight power supply
48 +3.3V LCD backlight power supply
49 LCD-RESET Connected to PA1 line
50 BACKLT PWR EN Connected to PC2 line
Backlight ON/OFF
4,7k pull-up

Note: Simultaneous use of both displays (MIPI-DSI and Parallel) is not possible

LCD MIPI-CSI Connector

VisionCB-STM32MP1-STD-v11 mipi.png
Pin Default function name Description
1 GND -
2 DSI-CKp Positive MIPI clock signal
3 DSI-CKn Negative MIPI clock signal
4 GND -
5 DSI-D0p Positive Lane 0 signal
6 DSI-D0n Negative Lane 0 signal
7 GND -
8 DSI-D1p Positive Lane 1 signal
9 DSI-D1n Negative Lane 1 signal
10 GND -
11 - -
12 - -
13 GND -
14 - -
15 - -
16 GND -
17 DSI-I2C-SCL Connected to PE2 line
4,7k pull-up
18 DSI-I2C-SDA Connected to PB7 line
4,7k pull-up
19 GND -
20 DSI-RESET Connected to PA1 line
21 DSI-TP-INT Connected to PA14 line
22 DSI-TP-RST -
23 GND -
24 +3.3V LCD logic power supply
25 +3.3V LCD logic power supply
26 +5V LCD backlight power supply
27 +5V LCD backlight power supply
28 DSI-BL-PWM Connected to PD15 line
PWM backlight brightness adjustment
Channel 4 of TIM4 (PWM)
29 DSI-BL-EN Connected to PC2 line
Backlight ON/OFF
4,7k pull-up
30 GND -

Note: Simultaneous use of both displays (MIPI-DSI and Parallel) is not possible



MPU internal RTC Battery Socket

VisionCB-STM32MP1-STD-v11 rtc-batt.png

Optional CR1220 lithium 3V battery is connected to VDD-COIN-3V RTC backup line.

It is not allowed to use a primary battery, because of a small reverse charging current.

Dimensions

VisionCB-STM32MP1-STD-v11 dimensions.png
NXP Partner ST Partner Renesas Partner