View source for Installing OpenSTLinux on VisionSOM-STM32MP1 with eMMC memory

{{PageHeader|Installing OpenSTLinux on VisionSOM-STM32MP1 with eMMC memory}}

The built system file can be written to the target device memory using the STM32CubeProgrammer tool, that is available on the STMicroelectronics website:

https://www.st.com/en/development-tools/stm32cubeprog.html


In order to program the module on VisionCB-STM32MP1-STD board, the BOOT jumpers need to be set to 000 to enable DFU boot. 

[[File:Stm32mp1_dfu_boot_jumpers.png|center|200px]]


STM32CubeProgrammer should be connected by the USB cable to the USB-OTG socket.

[[File:VisionSOM-STM32MP1_dfu_otg_connect.png|center|300px]]


Now in the STM32CubeProgrammer window connect to the module using '''Connect''' button and  select the '''tsv''' file. In the newly built system, the '''tsv''' file is in the directory:

<pre>
tmp-glibc/deploy/images/<MACHINE_NAME>/flashlayout_st-image-weston/trusted/
</pre>


[[File:STM32CubeProgrammer_1.png|center|500px]]



After programming the BOOT jumpers need to be set to 010 in order to run the installed system.