View source for VisionCB-x2L-STD Datasheet and Pinout

{{PageHeader|VisionCB-x2L-STD v.1.2 Datasheet and Pinout}} __toc__
__jzpdf__
== General description ==
[[File:VisionCB-x2L-STD.png|center|700px]]
 
The VisionCB-x2L-STD (with SOM equipped with Renesas RZ/V2L and RZ/G2L MPUs compatible) is a carrier board for the VisionSOM-V2L and VisionSOM-G2L family of computer-on-modules which are powered by dual-core Renesas MPUs (2 x ARM Cortex-A55 + Cortex-M33). The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, CAN, RS485, audio codec, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The VisionCB-x2L-STD is equipped with a simple user interface consisting of 4 buttons and 4 LEDs. VisionCB-x2L-STD carrier board is also equipped with a large number of popular peripherals, including: RS485, CAN, 10/100/1G Ethernet, MIPI display and camera connectors, serial console port on USB vCOM.

=== Applications ===
*Multimedia
*Video streaming
*Image inspection
*VisionAI gateway
*Doorbell systems
*EV chargers
*Smart agriculture gateways
*Industrial embedded Linux computer
*Home Appliances
*Home Automation – Smart Home
*Human-machine Interfaces (HMI)
*Point-of-sales (POS) terminals
*IoT gateways
*Machine vision equipment
*Robotics
*Fitness/outdoor equipment

== Features ==
*Carrier Board compatible with the VisionSOM-G2L and VisionSOM-V2L families of modules based on dual core, heterogenous Renesas RZ/V2L and RZ/G2L application processors
*SoM Connector: SODIMM200
*Expansion Connectors:
**ADC+GPIO connector 2x9 Pin Header (Male)
**Raspberry Pi Compatible Connectors 2x20 Pin Header (Male)
**Ethernet #1 (GMII) Connector Pin Header (Male)
*Communication Connectors:
**1x Ethernet 10/100/1000Mbit/s (RJ45)
**1x CAN (1x3 Pin Header, Male)
**1x RS-485 (1x3 Pin Header, Male)
**1x USB Host Type A connectors
**1x USB OTG Micro AB connector
**1x Console MicroUSB B connector
*Audio Interface:
**Mini-jack 3.5mm (headphones + microphone)
*Display Interface: 
**30-pin FFC/FPC MIPI-DSI (up to 4 lanes)
*Camera Interface:
**30-pin FFC/FPC MIPI-CSI2 (up to 4 lanes)
*User Interface:
**4+1 Pushbuttons
**4+2 LEDs
*External Power Supply 9-12V DC
*Temperature Range: 0 to +70°C
*Board Size: 160mm x 100mm x 21mm

== Pictures of VisionCB-x2L-STD v1.2 board ==
<center>
{| class="wikitable"
|-
! Version !! Photo
|-
| VisionCB-x2L-STD v1.2 board only || 
[[File:VisionCB-x2L-STD.png|center|thumb]]

|-
| VisionCB-x2L-STD v1.2 with VisionSOM-x2L || 
[[File:VisionCB-x2L-STD-SOM.png|center|thumb]]
|}
</center>

== Ordering info ==
__orderingInfoStart__
[
      {
        "type" : "separator",
        "value" : "VisionCB-x2L-STD v1.2"
    }
]
__orderingInfoEnd__

== Block Diagram ==
[[File:VisionCB-x2l-std-BLOKOWY.png|1000px|center]]

== Electrical parameters ==
<center>
{| class="wikitable"
! rowspan="2" style="text-align: center; font-weight: bold;" | Parameter
! colspan="3" style="text-align: center; font-weight: bold;" | Value
! rowspan="2" style="text-align: center; font-weight: bold;" | Units
! rowspan="2" style="text-align: center; font-weight: bold;" | Comment
|-
| Min.
| Typ.
| Max.
|-
| Power Supply
| 9.0
| 12.0
| 15.0
| V
| Positive pole on central connector of J200
|-
| Supply current
| -
| -
| 0.13
| A
| Excluding LCD, USB and antoher external loads
|-
| LCD/Camera Power Supply<br>(logic)
| 3.25
| 3.3
| 3.35
| V
| -
|-
| LCD/Camera Power Supply<br>(backlight and aux)
| 4.75
| 4.87
| 4.95
| V
| -
|-
| Arduino GPIO voltage
| 
| 3.3
| 
| V
| -
|}
</center>

== Power supply connector ==
The VisionCB-x2L-STD is equipped with external power source connector with pin diameter 2.5mm and hole diameter 6mm. The voltage of the external power source should be within the range 9-12 VDC.
[[File:VisionCB-x2L-STD-power-supply.png|center|800px]]

== Camera MIPI-CSI interface (FPC/FFC30, 0.5mm) ==
[[File:VisionCB-x2L-STD-CSI.png|center|800px]]

<center>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Pin
! style="text-align: center; font-weight: bold;" | Signal
! style="text-align: center; font-weight: bold;" | GPIO
! style="text-align: center; font-weight: bold;" | Description
|-
| 1 || GND || - || -
|-
| 2 || CSI-CLK-P || - || -
|-
| 3 || CSI-CLK-P || - || -
|-
| 4 || GND || - || -
|-
| 5 || CSI-DATA0-P || - || -
|-
| 6 || CSI-DATA0-N || - || -
|-
| 7 || GND || - || -
|-
| 8 || CSI-DATA1-P || - || -
|-
| 9 || CSI-DATA1-N || - || -
|-
| 10 || GND || - || - 
|-
| 11 || CSI-DATA2-P || - || -
|-
| 12 || CSI-DATA2-N || - || -
|-
| 13 || GND || - || -
|-
| 14 || CSI-DATA3-P || - || -
|-
| 15 || CSI-DATA3-N || - || -
|-
| 16 || GND|| - || -
|-
| 17 || I2C1-SCL || RIIC1_SCL || Camera confguration I2C interface (3.3V), pull-uped with 2.2k
|-
| 18 || I2C1-SDA || RIIC1_SDA || Camera confguration I2C interface (3.3V), pull-uped with 2.2k
|-
| 19 || GND || - || -
|-
| 20 || CSI-GPIO0 || P17-0 || Auxiliary GPIO
|-
| 21 || CSI-GPIO1 || P17-1 || Auxiliary GPIO
|-
| 22 || - || - || -
|-
| 23 || GND || - || -
|-
| 24 || +3.3V || - ||  Power supply for external devices
|-
| 25 || +3.3V || - ||  Power supply for external devices
|-
| 26 || +5V || - ||  Power supply for external devices
|-
| 27 || +5V || - || Power supply for external devices
|-
| 28 || - || - || -
|-
| 29 || - || - || -
|-
| 30 || GND || - || -
|}
</center>

Note: 
<br>1. The first pin of the MIPI-CSI connector is located in its upper part.

== Display MIPI-DSI interface (FPC/FFC30, 0.5mm) ==
[[File:VisionCB-x2L-STD-DSI.png|center|800px]]

<center>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Pin
! style="text-align: center; font-weight: bold;" | Signal
! style="text-align: center; font-weight: bold;" | GPIO
! style="text-align: center; font-weight: bold;" | Description
|-
| 1 || GND || -
|-
| 2 || DSI-CLK-P || - || -
|-
| 3 || DSI-CLK-P || - || -
|-
| 4 || GND || - || -
|-
| 5 || DSI-DATA0-P || - || -
|-
| 6 || DSI-DATA0-N || - || -
|-
| 7 || GND || - || -
|-
| 8 || DSI-DATA1-P || - || -
|-
| 9 || DSI-DATA1-N || - || -
|-
| 10 || GND || - || -
|-
| 11 || DSI-DATA2-P || - || -
|-
| 12 || DSI-DATA2-N || - || -
|-
| 13 || GND || - || -
|-
| 14 || DSI-DATA3-P || - || -
|-
| 15 || DSI-DATA3-N || - || -
|-
| 16 || GND|| - || -
|-
| 17 || I2C1-SCL || RIIC1_SCL || Display confguration I2C interface (3.3V), pull-uped with 2.2k
|-
| 18 || I2C1-SDA || RIIC1_SDA || Display confguration I2C interface (3.3V), pull-uped with 2.2k
|-
| 19 || GND || - || -
|-
| 20 || DISP-RST || P13-2 || Optional display reset signal
|-
| 21 || TP-INT || P17-1 || Optional touch-panel interrupt signal
|-
| 22 || TP-RST || P17-2 || Optional touch-panel reset signal
|-
| 23 || GND || - || -
|-
| 24 || +3.3V || - || Power supply for external devices
|-
| 25 || +3.3V || - || Power supply for external devices
|-
| 26 || +5V || - || Power supply for external devices
|-
| 27 || +5V || - || Power supply for external devices
|-
| 28 || DSI-BL-PWM || P16-0 || Optional PWM backlight signal
|-
| 29 || DSI-BL-EN || P16-1 || Optional ENABLE backlight signal
|-
| 30 || GND || - || -
|}
</center>
Note:
<br>1. The first pin of the MIPI-DSI connector is located in its upper part.

== USB Console Port ==
[[File:VisionCB-x2L-STD-console.png|center|800px]]

<center>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Console signal
! style="text-align: center; font-weight: bold;" | MPU signal
! style="text-align: center; font-weight: bold;" | GPIO
! style="text-align: center; font-weight: bold;" | Description
|-
| CONSOLE-TXD || UART0-TXD || P38-0 || GPIO 3.3V voltage levels
|-
| CONSOLE-RXD || UART0-RXD || P38-1 || GPIO 3.3V voltage levels
|}
</center>

== ADC + GPIO connector ==
[[File:VisionCB-x2L-STD-ADC.png|center|800px]]
<br>
{| class="wikitable" style="vertical-align:bottom;"
|- style="font-weight:bold; text-align:center;"
! Pin
! Signal
! GPIO
! Description
|-
| 1
| GND
| -
| -
|-
| 2
| 3.3V
| -
| -
|-
| 3
| ADC-CH0
| ADC-CH0
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 4
| ADC-CH1
| ADC-CH1
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 5
| ADC-CH2
| ADC-CH2
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 6
| ADC-CH3
| ADC-CH3
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 7
| ADC-CH4
| ADC-CH4
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 8
| ADC-CH5
| ADC-CH5
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 9
| ADC-CH6
| ADC-CH6
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 10
| ADC-CH7
| ADC-CH7
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 11
| P12-0
| P12-0
| GPIO 3.3 voltage levels
|-
| 12
| P13-1
| P13-1
| GPIO 3.3 voltage levels
|-
| 13
| P7-2
| P7-2
| GPIO 3.3 voltage levels
|-
| 14
| P11-0
| P11-0
| GPIO 3.3 voltage levels
|-
| 15
| P48-2
| P48-2
| GPIO 3.3 voltage levels
|-
| 16
| P4-1
| P4-1
| GPIO 3.3 voltage levels
|-
| 17
| CAN1-RX
| P13-0
| GPIO 3.3 voltage levels
|-
| 18
| CAN1-TX
| P12-1
| GPIO 3.3 voltage levels
|}

== Raspberry Pi compatible I/O header ==
[[File:visionCB-8Mmini-rpiconn.png|center|700px]]


<center>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Pin
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | Description

|-
| 1 || +3.3V || +3.3V generated by DC/DC built-in SOM (limited current load)
|-
| 2 || +5V || +5V generated by carrier board built-in DC/DC converter
|-
| 3 || I2C1-SDA || I2C1-SDA line
|-
| 4 || +5V || +5V generated by carrier board built-in DC/DC converter
|-
| 5 || I2C1-SDA || I2C1-SDA line
|-
| 6 || GND || -
|-
| 7 || GPIO4-IO09 || Universal GPIO with 3.3V logic levels
|-
| 8 || UART3-TXD || Default: UART3 TXD line or universal GPIO with 3.3V logic levels
|-
| 9 || GND || -
|-
| 10 || UART3-RXD || Default: UART3 RXD line or universal GPIO with 3.3V logic levels
|-
| 11 || GPIO4-IO08 || Universal GPIO with 3.3V logic levels
|-
| 12 || SPI2-CLK || Default: SPI2-CLK line or universal GPIO with 3.3V logic levels
|-
| 13 || - || -
|-
| 14 || GND || -
|-
| 15 || - || -
|-
| 16 || SPI2-MISO || Default: SPI2-MISO line or universal GPIO with 3.3V logic levels
|-
| 17 || +3.3V || +3.3V generated by DC/DC built-in SOM (limited current load)
|-
| 18 || SPI2-MOSI || Default: SPI2-MOSI line or universal GPIO with 3.3V logic levels
|-
| 19 || SPI1-MOSI || Default: SPI1-MOSI line or universal GPIO with 3.3V logic levels
|-
| 20 || GND || -
|-
| 21 || SPI1-MISO || Default: SPI1-MISO line or universal GPIO with 3.3V logic levels
|-
| 22 || SPI2-SS0 || Default: SPI2-SS0 line or universal GPIO with 3.3V logic levels
|-
| 23 || SPI1-CLK || Default: SPI1-CLK line or universal GPIO with 3.3V logic levels
|-
| 24 || SPI1-SS0 || Default: SPI1-SS0 line or universal GPIO with 3.3V logic levels
|-
| 25 || GND || -
|-
| 26 || GPIO-IO22 || Universal GPIO with 3.3V logic levels
|-
| 27 || - || -
|-
| 28 || - || -
|-
| 29 || GPIO4-IO12 || Universal GPIO with 3.3V logic levels
|-
| 30 || GND || -
|-
| 31 || GPIO4-IO13 || Universal GPIO with 3.3V logic levels
|-
| 32 || GPIO4-IO20 || Universal GPIO with 3.3V logic levels
|-
| 33 || GPIO4-IO14 || Universal GPIO with 3.3V logic levels
|-
| 34 || GND || -
|-
| 35 || GPIO4-IO14 || Universal GPIO with 3.3V logic levels
|-
| 36 || GPIO4-IO19 || Universal GPIO with 3.3V logic levels
|-
| 37 || GPIO4-IO16 || Universal GPIO with 3.3V logic levels
|-
| 38 || GPIO4-IO18 || Universal GPIO with 3.3V logic levels
|-
| 39 || GND || -
|-
| 40 || GPIO4-IO17 || Universal GPIO with 3.3V logic levels
|}
</center>

== Arduino Uno compatible I/O header ==
[[File:visionCB-8Mmini-arduino.png|center|700px]]


<center>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Pin
! style="text-align: center; font-weight: bold;" | Arduino name
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | Description
|-
| colspan="4" | Power connector J700, red connector
|-
| 1
| -
| -
| -
|-
| 2
| IOREF
| VDD-ARDUINO-IO
| Selected +3.3V or +5V (with V-ARD jumper).
|-
| 3
| RESET
| POR-B
| External reset input, active L.
|-
| 4
| 3.3V
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current).
|-
| 5
| 5V
| VCC-5V0
| +5V generated by carrier board built-in DC/DC converter.
|-
| 6
| GND
| GND
| -
|-
| 7
| GND
| GND
| -
|-
| 8
| VIN
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current).
|-
| colspan="4" | Analog inputs connector J702, blue connector
|-
| 1
| AIN0
| -
| Not internally connected.
|-
| 2
| AIN1
| -
| Not internally connected.
|-
| 3
| AIN2
| -
| Not internally connected.
|-
| 4
| AIN3
| -
| Not internally connected.
|-
| 5
| -
| -
| Not internally connected.
|-
| 6
| -
| -
| Not internally connected.
|-
| colspan="4" | Digital I/Os connector J704, yellow connector
|-
| 1
| DIO0
| UART3-RXD
| Default: UART3-RXD line or universal GPIO with 3.3/5V logic levels.
|-
| 2
| DIO1
| UART3-TXD
| Default: UART3-TXD line or universal GPIO with 3.3/5V logic levels.
|-
| 3
| DIO2
| GPIO4-IO15
| Universal GPIO with 3.3/5V logic levels.
|-
| 4
| DIO3
| GPIO4-IO14
| Universal GPIO with 3.3/5V logic levels.
|-
| 5
| DIO4
| GPIO4-IO13
| Universal GPIO with 3.3/5V logic levels.
|-
| 6
| DIO5
| GPIO4-IO12
| Universal GPIO with 3.3/5V logic levels.
|-
| 7
| DIO6
| GPIO4-IO11
| Universal GPIO with 3.3/5V logic levels.
|-
| 8
| DIO7
| GPIO4-IO10
| Universal GPIO with 3.3/5V logic levels.
|-
| colspan="4" | Digital I/Os connector J703, yellow connector
|-
| 1
| DIO8
| GPIO4-IO08
| Universal GPIO with 3.3/5V logic levels.
|-
| 2
| DIO9
| GPIO4-IO09
| Universal GPIO with 3.3/5V logic levels.
|-
| 3
| DIO10
| SPI1-SS0
| Default: SPI1-SS0 line or universal GPIO with 3.3/5V logic levels.
|-
| 4
| DIO11
| SPI1-MOSI
| Default: SPI1-MOSI line or universal GPIO with 3.3/5V logic levels.
|-
| 5
| DIO12
| SPI1-MISO
| Default: SPI1-MISO line or universal GPIO with 3.3/5V logic levels.
|-
| 6
| DIO13
| SPI1-CLK
| Default: SPI1-CLK line or universal GPIO with 3.3/5V logic levels.
|-
| 7
| GND
| GND
| -
|-
| 8
| AREF
| VDD-ARDUINO-IO
| +3.3V or +5V selected with V-ARD jumper.
|-
| 9
| DIO14
| I2C1-SCL
| Default: I2C1-SCL line or universal GPIO with 3.3/5V logic levels.
|-
| 10
| DIO15
| I2C1-SDA
| Default: I2C1-SDA line or universal GPIO with 3.3/5V logic levels.
|}
</center>

Notes:<br />
1. I/O logic levels are selected 3.3/5V with V-ARD jumper.<br />
2. RESET line is 3.3 and 5V compatible.<br />

== Serial Communication/GPIO header (J305) ==
[[File:visionCB-8Mmini-serialcommGPIO.png|center|700px]]


<center>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Pin
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | Description
|-
| 1 || +3.3V || +3.3V generated by DC/DC built-in SOM (limited current load)
|-
| 2 || GPIO5-IO23 || Universal GPIO with 3.3V logic levels <br>By default is connected to MIPI-DSI (J301) as touch-panel interrupt line (with 47k pull-up)
|-
| 3 || UART2-CTS || By default: UART2-CTS or universal GPIO with 3.3V logic levels
|-
| 4 || SAI3-TXFS || By default: SAI3-TXFS or universal GPIO with 3.3V logic levels <br>Connected to MIPI-CSI (J302)
|-
| 5 || UART2-RTS || By default: UART2-RTS or universal GPIO with 3.3V logic levels
|-
| 6 || SAI3-TXC || By default: SAI3-TXC or universal GPIO with 3.3V logic levels <br>Connected to MIPI-CSI (J302)
|-
| 7 || UART2-RXD || By default: UART2-RXD or universal GPIO with 3.3V logic levels
|-
| 8 || SAI3-TXD || By default: SAI3-TXD or universal GPIO with 3.3V logic levels
|-
| 9 || UART2-TXD || By default: UART2-TXD or universal GPIO with 3.3V logic levels
|-
| 10 || SAI3-RXFS || By default: SAI3-RXFS or universal GPIO with 3.3V logic levels <br>By default is connected to MIPI-DSI (J301) as display module reset signal
|-
| 11 || I2C2-SCL || By default: I2C2-SCL or universal GPIO with 3.3V logic levels <br>Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
|-
| 12 || SAI3-MCLK || By default: SAI3-MCLK or universal GPIO with 3.3V logic levels
|-
| 13 || I2C2-SDA || By default: I2C2-SDA or universal GPIO with 3.3V logic levels <br>Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
|-
| 14 || SPDIF-TX || By default: SPDIC-TX or universal GPIO with 3.3V logic levels  <br>By default is connected to MIPI-DSI (J301) as touch-panel reset signal
|-
| 15 || I2C3-SCL || By default: I2C3-SCL or universal GPIO with 3.3V logic levels
|-
| 16 || SPDIF-RX || By default: I2C3-SCL or universal GPIO with 3.3V logic levels <br>By default is connected to MIPI-DSI (J301) as display module PWM backlight control
|-
| 17 || I2C3-SDA || By default: I2C3-SDA or universal GPIO with 3.3V logic levels
|-
| 18 || SPDIF-CLK || By default: SPDIF-CLK or universal GPIO with 3.3V logic levels <br>By default is connected to MIPI-DSI (J301) as display module on/off signal
|-
| 19 || GND || -
|-
| 20 || GND || -
|}
</center>

== User Interface (switches and LEDs) ==
[[File:visionCB-8Mmini-userinterface.png|center|700px]]


<center>
'''User switches'''
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Switch
! style="text-align: center; font-weight: bold;" | GPIO
! style="text-align: center; font-weight: bold;" | Description
|-
| S305 (black, most on the left) || GPIO4-IO03 || 47k pull-up
|-
| S304 || GPIO4-IO02 || 47k pull-up
|-
| S303 || GPIO4-IO01 || 47k pull-up
|-
| S302 (black, most on the right) || GPIO4-IO00 || 47k pull-up
|}


'''System switches'''
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Switch
! style="text-align: center; font-weight: bold;" | Signal name
! style="text-align: center; font-weight: bold;" | Description
|-
| S301 (left, red) || Reset || -
|-
| S300 (right, red) || BOOT-RECOVERY || -
|}


'''User LEDs'''
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | LED
! style="text-align: center; font-weight: bold;" | GPIO
! style="text-align: center; font-weight: bold;" | Description
|-
| D303 (most on the left) || GPIO4-IO04|| User LED1, buffered with inverter
|-
| D302 || GPIO4-IO05 || User LED2, buffered with inverter
|-
| D301 || GPIO4-IO06 || User LED3, buffered with inverter
|-
| D300 (most on the right) || GPIO4-IO07 || User LED4, buffered with inverter
|}


'''System LEDs'''
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | LED
! style="text-align: center; font-weight: bold;" | GPIO
! style="text-align: center; font-weight: bold;" | Description
|-
| D304 || SYS-LED|| System function monitoring
|-
| D305 || - || Power LED (3.3V)
|}
</center>


== Dimensions ==
[[File:VisionCB-x2L-STD-dimensions.png|800px|center]]