View source for VisionCB-x2L-STD Datasheet and Pinout

{{PageHeader|VisionCB-x2L-STD v.1.2 Datasheet and Pinout}} __toc__
__jzpdf__
== General description ==
[[File:VisionCB-x2L-STD.png|center|700px]]
 
The VisionCB-x2L-STD (with SOM equipped with Renesas RZ/V2L and RZ/G2L MPUs compatible) is a carrier board for the VisionSOM-V2L and VisionSOM-G2L family of computer-on-modules which are powered by dual-core Renesas MPUs (2 x ARM Cortex-A55 + Cortex-M33). The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, CAN, RS485, audio codec, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The VisionCB-x2L-STD is equipped with a simple user interface consisting of 4 buttons and 4 LEDs. VisionCB-x2L-STD carrier board is also equipped with a large number of popular peripherals, including: RS485, CAN, 10/100/1G Ethernet, MIPI display and camera connectors, serial console port on USB vCOM.

=== Applications ===
*Multimedia
*Video streaming
*Image inspection
*VisionAI gateway
*Doorbell systems
*EV chargers
*Smart agriculture gateways
*Industrial embedded Linux computer
*Home Appliances
*Home Automation – Smart Home
*Human-machine Interfaces (HMI)
*Point-of-sales (POS) terminals
*IoT gateways
*Machine vision equipment
*Robotics
*Fitness/outdoor equipment

== Features ==
*Carrier Board compatible with the VisionSOM-G2L and VisionSOM-V2L families of modules based on dual core, heterogenous Renesas RZ/V2L and RZ/G2L application processors
*SoM Connector: SODIMM200
*Expansion Connectors:
**ADC+GPIO connector 2x9 Pin Header (Male)
**Raspberry Pi Compatible Connectors 2x20 Pin Header (Male)
**Ethernet #1 (GMII) Connector Pin Header (Male)
*Communication Connectors:
**1x Ethernet 10/100/1000Mbit/s (RJ45)
**1x CAN (1x3 Pin Header, Male)
**1x RS-485 (1x3 Pin Header, Male)
**1x USB Host Type A connectors
**1x USB OTG Micro AB connector
**1x Console MicroUSB B connector
*Audio Interface:
**Mini-jack 3.5mm (headphones + microphone)
*Display Interface: 
**30-pin FFC/FPC MIPI-DSI (up to 4 lanes)
*Camera Interface:
**30-pin FFC/FPC MIPI-CSI2 (up to 4 lanes)
*User Interface:
**4+1 Pushbuttons
**4+2 LEDs
*External Power Supply 9-12V DC
*Temperature Range: 0 to +70°C
*Board Size: 160mm x 100mm x 21mm

== Pictures of VisionCB-x2L-STD v1.2 board ==
<center>
{| class="wikitable"
|-
! Version !! Photo
|-
| VisionCB-x2L-STD v1.2 board only || 
[[File:VisionCB-x2L-STD.png|center|thumb]]

|-
| VisionCB-x2L-STD v1.2 with VisionSOM-x2L || 
[[File:VisionCB-x2L-STD-SOM.png|center|thumb]]
|}
</center>

== Ordering info ==
__orderingInfoStart__
[
      {
        "type" : "separator",
        "value" : "VisionCB-x2L-STD v1.2"
    }
]
__orderingInfoEnd__

== Block Diagram ==
[[File:VisionCB-x2l-std-BLOKOWY.png|1000px|center]]

== Electrical parameters ==
<center>
{| class="wikitable"
! rowspan="2" style="text-align: center; font-weight: bold;" | Parameter
! colspan="3" style="text-align: center; font-weight: bold;" | Value
! rowspan="2" style="text-align: center; font-weight: bold;" | Units
! rowspan="2" style="text-align: center; font-weight: bold;" | Comment
|-
| Min.
| Typ.
| Max.
|-
| Power Supply
| 9.0
| 12.0
| 15.0
| V
| Positive pole on central connector of J200
|-
| Supply current
| -
| -
| 0.13
| A
| Excluding LCD, USB and antoher external loads
|-
| LCD/Camera Power Supply<br>(logic)
| 3.25
| 3.3
| 3.35
| V
| -
|-
| LCD/Camera Power Supply<br>(backlight and aux)
| 4.75
| 4.87
| 4.95
| V
| -
|-
| Arduino GPIO voltage
| 
| 3.3
| 
| V
| -
|}
</center>

== Power supply connector ==
The VisionCB-x2L-STD is equipped with external power source connector with pin diameter 2.5mm and hole diameter 6mm. The voltage of the external power source should be within the range 9-12 VDC.
[[File:VisionCB-x2L-STD-power-supply.png|center|800px]]

== Camera MIPI-CSI interface (FPC/FFC30, 0.5mm) ==
[[File:VisionCB-x2L-STD-CSI.png|center|800px]]

<center>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Pin
! style="text-align: center; font-weight: bold;" | Signal
! style="text-align: center; font-weight: bold;" | GPIO
! style="text-align: center; font-weight: bold;" | Description
|-
| 1 || GND || - || -
|-
| 2 || CSI-CLK-P || - || -
|-
| 3 || CSI-CLK-P || - || -
|-
| 4 || GND || - || -
|-
| 5 || CSI-DATA0-P || - || -
|-
| 6 || CSI-DATA0-N || - || -
|-
| 7 || GND || - || -
|-
| 8 || CSI-DATA1-P || - || -
|-
| 9 || CSI-DATA1-N || - || -
|-
| 10 || GND || - || - 
|-
| 11 || CSI-DATA2-P || - || -
|-
| 12 || CSI-DATA2-N || - || -
|-
| 13 || GND || - || -
|-
| 14 || CSI-DATA3-P || - || -
|-
| 15 || CSI-DATA3-N || - || -
|-
| 16 || GND|| - || -
|-
| 17 || I2C1-SCL || RIIC1_SCL || Camera confguration I2C interface (3.3V), pull-uped with 2.2k
|-
| 18 || I2C1-SDA || RIIC1_SDA || Camera confguration I2C interface (3.3V), pull-uped with 2.2k
|-
| 19 || GND || - || -
|-
| 20 || CSI-GPIO0 || P17-0 || Auxiliary GPIO
|-
| 21 || CSI-GPIO1 || P17-1 || Auxiliary GPIO
|-
| 22 || - || - || -
|-
| 23 || GND || - || -
|-
| 24 || +3.3V || - ||  Power supply for external devices
|-
| 25 || +3.3V || - ||  Power supply for external devices
|-
| 26 || +5V || - ||  Power supply for external devices
|-
| 27 || +5V || - || Power supply for external devices
|-
| 28 || - || - || -
|-
| 29 || - || - || -
|-
| 30 || GND || - || -
|}
</center>

Note: 
<br>1. The first pin of the MIPI-CSI connector is located in its upper part.

== Display MIPI-DSI interface (FPC/FFC30, 0.5mm) ==
[[File:VisionCB-x2L-STD-DSI.png|center|800px]]

<center>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Pin
! style="text-align: center; font-weight: bold;" | Signal
! style="text-align: center; font-weight: bold;" | GPIO
! style="text-align: center; font-weight: bold;" | Description
|-
| 1 || GND || -
|-
| 2 || DSI-CLK-P || - || -
|-
| 3 || DSI-CLK-P || - || -
|-
| 4 || GND || - || -
|-
| 5 || DSI-DATA0-P || - || -
|-
| 6 || DSI-DATA0-N || - || -
|-
| 7 || GND || - || -
|-
| 8 || DSI-DATA1-P || - || -
|-
| 9 || DSI-DATA1-N || - || -
|-
| 10 || GND || - || -
|-
| 11 || DSI-DATA2-P || - || -
|-
| 12 || DSI-DATA2-N || - || -
|-
| 13 || GND || - || -
|-
| 14 || DSI-DATA3-P || - || -
|-
| 15 || DSI-DATA3-N || - || -
|-
| 16 || GND|| - || -
|-
| 17 || I2C1-SCL || RIIC1_SCL || Display confguration I2C interface (3.3V), pull-uped with 2.2k
|-
| 18 || I2C1-SDA || RIIC1_SDA || Display confguration I2C interface (3.3V), pull-uped with 2.2k
|-
| 19 || GND || - || -
|-
| 20 || DISP-RST || P13-2 || Optional display reset signal
|-
| 21 || TP-INT || P17-1 || Optional touch-panel interrupt signal
|-
| 22 || TP-RST || P17-2 || Optional touch-panel reset signal
|-
| 23 || GND || - || -
|-
| 24 || +3.3V || - || Power supply for external devices
|-
| 25 || +3.3V || - || Power supply for external devices
|-
| 26 || +5V || - || Power supply for external devices
|-
| 27 || +5V || - || Power supply for external devices
|-
| 28 || DSI-BL-PWM || P16-0 || Optional PWM backlight signal
|-
| 29 || DSI-BL-EN || P16-1 || Optional ENABLE backlight signal
|-
| 30 || GND || - || -
|}
</center>
Note:
<br>1. The first pin of the MIPI-DSI connector is located in its upper part.

== USB Console Port ==
[[File:VisionCB-x2L-STD-console.png|center|800px]]

<center>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Console line
! style="text-align: center; font-weight: bold;" | Signal
! style="text-align: center; font-weight: bold;" | GPIO
! style="text-align: center; font-weight: bold;" | Description
|-
| CONSOLE-TXD || UART0-TXD || P38-0 || GPIO 3.3V voltage levels
|-
| CONSOLE-RXD || UART0-RXD || P38-1 || GPIO 3.3V voltage levels
|}
</center>

== ADC + GPIO connector ==
[[File:VisionCB-x2L-STD-ADC.png|center|800px]]
<br>
{| class="wikitable" style="vertical-align:bottom;"
|- style="font-weight:bold; text-align:center;"
! Pin
! Signal
! GPIO
! Description
|-
| 1
| GND
| -
| -
|-
| 2
| 3.3V
| -
| -
|-
| 3
| ADC-CH0
| ADC-CH0
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 4
| ADC-CH1
| ADC-CH1
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 5
| ADC-CH2
| ADC-CH2
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 6
| ADC-CH3
| ADC-CH3
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 7
| ADC-CH4
| ADC-CH4
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 8
| ADC-CH5
| ADC-CH5
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 9
| ADC-CH6
| ADC-CH6
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 10
| ADC-CH7
| ADC-CH7
| Dedicated analog input, 12-bit ADC, max. 1.8V on input
|-
| 11
| P12-0
| P12-0
| GPIO 3.3 voltage levels
|-
| 12
| P13-1
| P13-1
| GPIO 3.3 voltage levels
|-
| 13
| P7-2
| P7-2
| GPIO 3.3 voltage levels
|-
| 14
| P11-0
| P11-0
| GPIO 3.3 voltage levels
|-
| 15
| P48-2
| P48-2
| GPIO 3.3 voltage levels
|-
| 16
| P4-1
| P4-1
| GPIO 3.3 voltage levels
|-
| 17
| CAN1-RX
| P13-0
| GPIO 3.3 voltage levels
|-
| 18
| CAN1-TX
| P12-1
| GPIO 3.3 voltage levels
|}

== Raspberry Pi compatible I/O header ==
[[File:VisionCB-x2L-STD-GPIO.png|center|800px]]

{| class="wikitable" 
|- style="font-weight:bold; text-align:center; vertical-align:bottom;"
! Pin
! Signal
! MPU signal
! Description
|- style="vertical-align:bottom;"
| 1
| 3.3V
| -
| -
|- style="vertical-align:bottom;"
| 2
| 5.0V
| -
| -
|-
| style="vertical-align:bottom;" | 3
| style="vertical-align:bottom;" | I2C0-SDA
| RIIC0_SDA
| style="vertical-align:bottom;" | Dedicated I2C MPU line
|- style="vertical-align:bottom;"
| 4
| 5.0V
| -
| -
|-
| style="vertical-align:bottom;" | 5
| style="vertical-align:bottom;" | I2C0-SCL
| RIIC0_SCL
| style="vertical-align:bottom;" | Dedicated I2C MPU line
|- style="vertical-align:bottom;"
| 6
| GND
| -
| -
|- style="vertical-align:bottom;"
| 7
| P45-0
| P45-0
| GPIO 3.3 voltage levels
|-
| style="vertical-align:bottom;" | 8
| style="vertical-align:bottom;" | UART4-TXD
| P2-0
| style="vertical-align:bottom;" | GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 9
| GND
| -
| -
|-
| style="vertical-align:bottom;" | 10
| style="vertical-align:bottom;" | UART4-RXD
| P2-1
| style="vertical-align:bottom;" | GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 11
| P8-2
| P8-2
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 12
| P15-0
| P15-0
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 13
| P14-1
| P14-1
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 14
| GND
| -
| -
|- style="vertical-align:bottom;"
| 15
| P14-0
| P14-0
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 16
| UART1-RXD
| P40-0
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 17
| P11-1
| P11-1
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 18
| UART1-TXD
| P40-1
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 19
| SPI0-MOSI
| P43-1
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 20
| GND
| -
| -
|- style="vertical-align:bottom;"
| 21
| SPI0-MISO
| P43-2
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 22
| P9-1
| P9-1
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 23
| SPI0-CLK
| P43-0
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 24
| SPI0-SSL
| P43-3
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 25
| GND
| -
| -
|- style="vertical-align:bottom;"
| 26
| P9-0
| P9-0
| GPIO 3.3 voltage levels
|-
| style="vertical-align:bottom;" | 27
| style="vertical-align:bottom;" | I2C3-SDA
| style="vertical-align:bottom;" | P46-2
| I2C interface used by MPU for SOM PMIC configuration
|-
| style="vertical-align:bottom;" | 28
| style="vertical-align:bottom;" | I2C3-SCL
| style="vertical-align:bottom;" | P46-3
| I2C interface used by MPU for SOM PMIC configuration
|- style="vertical-align:bottom;"
| 29
| UART1-CTS
| P41-0
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 30
| GND
| -
| -
|- style="vertical-align:bottom;"
| 31
| UART1-RTS
| P41-1
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 32
| P1-1
| P1-1
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 33
| P10-1
| P10-1
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 34
| GND
| -
| -
|- style="vertical-align:bottom;"
| 35
| SPI1-MISO
| P44-2
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 36
| SPI1-SSL
| P44-3
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 37
| P10-0
| P10-0
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 38
| SPI1-MOSI
| P44-1
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| 39
| GND
| -
| -
|- style="vertical-align:bottom;"
| 40
| SPI1-CLK
| P44-0
| GPIO 3.3 voltage levels
|}

== GMII of ETH0 connection ==
[[File:VisionCB-x2L-STD-GMII-ETH0.png|center|800px]]
{| class="wikitable" 
|- style="font-weight:bold; text-align:center; vertical-align:bottom;"
! Signal
! MPU signal
! Description
|-
| style="vertical-align:bottom;" | ET0-TXD0
| style="vertical-align:bottom;" | ET0-TXD0
| 1.8V   Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-TXD1
| ET0-TXD1
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-TXD2
| ET0-TXD2
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-TXD3
| ET0-TXD3
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-TXC
| ET0-TXC
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-TX-CTL
| ET0-TX-CTL
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-RXD0
| ET0-RXD0
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-RXD1
| ET0-RXD1
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-RXD2
| ET0-RXD2
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-RXD3
| ET0-RXD3
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-RXC
| ET0-RXC
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-RX-CTL
| ET0-RX-CTL
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-MDC
| ET0-MDC
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-MDIO
| ET0-MDIO
| 1.8V Power Domain, GPIO mode not allowed
|- style="vertical-align:bottom;"
| ET0-INT
| P47-0
| GPIO 3.3 voltage levels
|- style="vertical-align:bottom;"
| ET0-PHY-RST
| P47-1
| GPIO 3.3 voltage levels
|}

== GMII of ETH1 connector ==
[[File:VisionCB-x2L-STD-GMII.png|center|800px]]

{| class="wikitable" 
|- style="font-weight:bold; text-align:center; vertical-align:bottom;"
! Pin
! Signal
! MPU signal
! Description
|- 
| 1
| 3.3V
| -
| -
|-
| 2
| ET1-TXD0
| P30-0
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|-
| 3
| ET1-TXD1
| P30-1
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|-
| 4
| ET1-TXD2
| P31-0
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 5
| ET1-TXD3
| P31-1
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 6
| ET1-TXC
| P29-0
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 7
| ET1-TX-CTL
| P29-1
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 8
| ET1-RXD3
| P36-0
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 9
| ET1-RXD2
| P35-1
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 10
| ET1-RXD1
| P35-0
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 11
| ET1-RXD0
| P34-1
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 12
| ET1-RX-CTL
| P34-0
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 13
| ET1-RXC
| P33-1
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 14
| ET1-MDC
| P37-0
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 15
| ET1-MDIO
| P37-1
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 16
| ET1-INT
| P47-2
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|- 
| 17
| ET1-PHY-RST
| P47-3
| 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL, GPIO allowed only for 3.3V.<br />
|-
| 18
| ET1-VDD-SEL
| -
| Ethernet 1 (ET1) interface voltage selection:<br>ET1-VDD-SEL='0' -> V=1.8V;<br>ET1-VDD-SEL='1' or left open -> V=3.3V<br>The line has internal pull-up.
|- 
| 19
| GND
| -
| -
|- 
| 20
| GND
| -
| -
|}

== USB interfaces ==
[[File:TBD|center|800px]]
TBD

== Audio codec ==
[[File:TBD|center|800px]]
TBD

== CAN interface ==
[[File:TBD|center|800px]]
TBD

== RS-485 interface ==
[[File:TBD|center|800px]]
TBD

== Dimensions ==
[[File:VisionCB-x2L-STD-dimensions.png|800px|center]]