View source for SL-TFT7-TP-600-1024-MIPI Datasheet and Pinout

{{PageHeader|Display module SL-TFT7-TP-600-1024-MIPI Datasheet and Pinout}} __toc__
__jzpdf__
== General description ==
[[File:SL-TFT7-TP-600-1024-MIPI.png|800px|center]]
<br> 
The SL-TFT7-TP-600-1024-MIPI is complete display TFT-LCD (1024x600 pixels) module integrated with capactive touch-panel. Module is powered from +5V @800mA (max.), the data interface is MIPI-DSI + I2C (for touch-panel controller). SL-TFT7-TP-600-1024-MIPI module is equipped with 30-pin flat cable (A-A) and is compatible with selected SoMLabs carrier-boards and video converters.

== Features ==
* Powered by Riverdi RVT70HSMNWC00 TFT module covered with protective glass
* Intergated flexible signal cable
* Display size 7 inches
* Display LCD matrix 1024x600 px
* Capacitive touch-panel + TP controller
* MIPI-DSI interface
* Dual supply +3.3V and +5V (all necessary DC/DC converters are built-in)
* Backlight LEDs built-in
* Compatible with SoMLabs carrier boards equipped with MIPI-DSI video interface

== Ordering info ==
'''SL-TFT7-TP-600-1024-MIPI v1.1''' - FPC 30-pin flat cable (A-A) is included.

== Operating ranges ==
{| class="wikitable"
! Parameter
! Value
! Unit
! Comment
|-
| Power Supply
| <center>5</center>
| <center>V</center>
| -
|-
| Current
| <center>0.8</center>
| <center>A</center>
| Maximum value, depends on displayed picture and backlight intensity
|-
| Video input voltage
| <center>MIPI-DSI levels</center>
| <center>V</center>
| 
|-
| Touch panel controller IO voltage
| <center>3.3</center>
| <center>V</center>
| I2C interface, 2.2kΩ pull-up resistor on SDA and SCL lines
|- 
|Environment temperature
|<center>-20…+70</center>
|<sup>o</sup>C
| -
|}

== Electrical parameters ==
{| class="wikitable"
! rowspan="2" | Signal name
! rowspan="2" | Parameter
! colspan="3" | Value
! rowspan="2" | Units
|-
| Min.
| Typ.
| Max.
|-
| V<sub>PWR5V</sub>
| Power Enable Input Voltage
| 4.8
| 5.0
| 5.2
| V
|-
| V<sub>PWR3V3</sub>
| Power Enable Input Voltage
| 3.2
| 3.3
| 3.5
| V
|-
| I<sub>PWR5V</sub>
| Total Supply Current
| 500
| 520
| 600
| mA
|-
| I<sub>PWR3V3</sub>
| Total Supply Current
| 100
| 135
| 200
| mA
|-
| V<sub>TP</sub>
| TP Controller IO Voltage
| 0
| 3.3
| 3.6
| V
|-
| V<sub>PWREN</sub>
| Power Enable Input Voltage
| 0
| -
| 5.0
| V
|-
| V<sub>PWMIN</sub>
| Power Enable Input Voltage
| 0
| -
| 3.6
| V

|-
| f<sub>TPI2C</sub>
| TP Controller I2C Speed
| -
| -
| 400
| kHz
|-
| R<sub>INT</sub>
| Interrupt Output Pull-up Resistance
| -
| 10
| -
| kΩ
|-
| R<sub>PWREN</sub>
| Power Enable Pull-up Resistance
| -
| 10
| -
| kΩ
|-
| R<sub>TPI2C</sub>
| Touch Panel Controller I2C IOs Pull-up Resistance
| -
| 2.2
| -
| kΩ
|-
| f<sub>PWM</sub>
| Recommended PWM signal frequency
| 2
| 2.5
| 4
| kHz
|}

== Pinout ==
[[File:Sl-TFT7-TP-600-1024-MIPI-connector.png]]
<br />
<br>

<br>
<b>FPC30 connector</b>
<br>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Connector pin
! style="text-align: center; font-weight: bold;" | Function name
! style="text-align: center; font-weight: bold;" | Description
|-
| 1
| GND
| -
|-
| 2
| MIPI_CLK_p
| Data clock positive
|-
| 3
| MIPI_CLK_n
| Data clock negative
|-
| 4
| GND
| -
|-
| 5
| MIPI_D0_p
| Data lane 0 positive
|-
| 6
| MIPI_D0_n
| Data lane 0 negative
|-
| 7
| GND
| -
|-
| 8
| MIPI_D1_p
| Data lane 1 positive
|-
| 9
| MIPI_D1_n
| Data lane 1 negative
|-
| 10
| GND
| -
|-
| 11
| MIPI_D2_p
| Data lane 2 positive
|-
| 12
| MIPI_D2_n
| Data lane 2 negative
|-
| 13
| GND
| -
|-
| 14
| MIPI_D3_p
| Data lane 3 positive
|-
| 15
| MIPI_D3_n
| Data lane 3 negative
|-
| 16
| GND
| -
|-
| 17
| TP_SCL
| Touch panel controller SCL (2.2kOhm pull-up, TTL-LV)
|-
| 18
| TP_SDA
| Touch panel controller SDA (2.2kOhm pull-up, TTL-LV)
|-
| 19
| GND
| -
|-
| 20
| DISP_CTRL_RES
| Optional display controller reset input (10kOhm pull-up, TTL-LV, active low)
|-
| 21
| TP_INT
| Touch panel interrupt (10kOhm pull-up, TTL-LV)
|-
| 22
| TP_RES
| Optional touch-panel controller reset input (10kOhm pull-up, TTL-LV, active low)
|-
| 23
| GND
| -
|-
| 24
| +3.3V
| Power supply for logic (display and touch-panel controllers)
|-
| 25
| +3.3V
| Power supply for logic (display and touch-panel controllers)
|-
| 26
| +5V
| Power supply for backlight
|-
| 27
| +5V
| Power supply for backlight
|-
| 28
| PWMIN<sub>1</sub>
| Backlight brightness input (PWM)
|-
| 29
| PWREN<sub>2</sub>
| Backlight power enable input (10kOhm pull-down)
|-
| 30
| GND
| -
|}
Note:
<br>1. PWMIN is external signal input that can be disconnected from DC/DC converter with on-board switch (vide section Switches)
<br>2. PWREN is external signal input that can be disconnected from DC/DC converter with on-board switch (vide section Switches)

== Switches ==
[[File:SL-TFT7-TP-600-1024-MIPI-switches.png|center]]<br>

Note:
<br>1. Switch marked BL allows to control on-board backlight DC/DC converter: LEDs can be on permanently (position ON) or cotrolled by logic state of PWREN signal (position ON-OFF, ON if PWREN=1 and OFF if PWREN=0)
<br>2. Switch marked BL PWM allows to change backlight brightness using external PWM signal connected to PWMIN signal. Recommended PWM frequency >=2kHz.

== Hardware configuration options ==
[[File:SL-TFT7-TP-600-1024-MIPI-configurations.png|center]]<br>

Note:
<br>1. In yellow are marked default settings.
<br>2. Marked in green are options available in "left" position of jumpers.
<br>3. Marked in purple are options available in "right" position of jumpers.
<br>4. Details of configurations are available in RVT70HSMNWC00 module datasheet[https://somlabs.com/wp-content/uploads/DS_RVT70HSMNWC00-_Rev.1.1.pdf].