StarCB-STM32H757-STD - Revision history

Piotrzbysinski at 15:36, 11 February 2026

2026-02-11T15:36:41Z

← Older revision		Revision as of 15:36, 11 February 2026
Line 8:		Line 8:
	\|cb_console_interface=ST-Link and vCOM (console port)		\|cb_console_interface=ST-Link and vCOM (console port)
	\|cb_switches=4+1 (reset)		\|cb_switches=4+1 (reset)
	\|cb_leds=4 + 1 (power)		\|cb_leds=4+1 (power)
	\|cb_connectors= 2 sections of GPIO		\|cb_connectors= 2 sections of GPIO
	\|cb_rtc_backup=CR2032 battery		\|cb_rtc_backup=CR2032 battery

Piotrzbysinski at 15:29, 11 February 2026

2026-02-11T15:29:55Z

← Older revision		Revision as of 15:29, 11 February 2026
Line 2:		Line 2:
	\|cb_som_compatibility=StarSOM-STM32H757 module with STM32H757XI microcontroller		\|cb_som_compatibility=StarSOM-STM32H757 module with STM32H757XI microcontroller
	\|cb_som_socket=Square b2b		\|cb_som_socket=Square b2b
	\|cb_display_connector=MIPI-DSI (FPC30)		\|cb_display_connector=MIPI-DSI (FPC30)/24b RGB connector (FPC50)
	\|cb_network=1x Ethernet 10/100~~/1000~~ Mbit/s, RJ45		\|cb_network=1x Ethernet 10/100 Mbit/s, RJ45
	\|cb_usb=USB 2.0 host x1, USB-OTG 2.0 x1		\|cb_usb=USB 2.0 host x1, USB-OTG 2.0 x1
	\|cb_debugger=JTAG connector for external debugger		\|cb_debugger=on-board ST-Link and JTAG connector for external debugger
	\|cb_console_interface=~~SWDAP~~ and vCOM (console port)		\|cb_console_interface=ST-Link and vCOM (console port)
	\|cb_switches=4+1 (reset)		\|cb_switches=4+1 (reset)
	\|cb_leds=4 + 1 (power)		\|cb_leds=4 + 1 (power)
	\|cb_connectors= 3 sections of GPIO		\|cb_connectors= 2 sections of GPIO
	\|cb_rtc_backup=CR2032 battery		\|cb_rtc_backup=CR2032 battery
	\|cb_power_supply=External 9-12V DC		\|cb_power_supply=External 9-12V DC

Piotrzbysinski at 15:26, 11 February 2026

2026-02-11T15:26:22Z

← Older revision		Revision as of 15:26, 11 February 2026
Line 1:		Line 1:
	{{Product\|category1=SOM\|category2=\|image=StarCB-STM32H757-STD.png		{{Product\|category1=SOM\|category2=\|image=StarCB-STM32H757-STD.png
	\|cb_som_compatibility=StarSOM-STM32H757 module with ~~STM32H757~~ microcontroller		\|cb_som_compatibility=StarSOM-STM32H757 module with STM32H757XI microcontroller
	\|cb_som_socket=Square b2b		\|cb_som_socket=Square b2b
	\|cb_display_connector=MIPI-DSI (FPC30)		\|cb_display_connector=MIPI-DSI (FPC30)

Piotrzbysinski at 15:01, 11 February 2026

2026-02-11T15:01:26Z

← Older revision		Revision as of 15:01, 11 February 2026
Line 13:		Line 13:
	\|cb_power_supply=External 9-12V DC		\|cb_power_supply=External 9-12V DC
	\|dim=160mm x 100mm x 22mm		\|dim=160mm x 100mm x 22mm
	\|description=~~StarCBSTM32H757~~-STD is a carrier board for the StarSOM-STM32H757 family of computer-on-modules, which are powered by STM32H757 MCU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as audio codec, USB, Ethernet, UART, RS485, CAN, ST-Link debugger etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>		\|description=StarCB-STM32H757-STD is a carrier board for the StarSOM-STM32H757 family of computer-on-modules, which are powered by STM32H757 MCU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as audio codec, USB, Ethernet, UART, RS485, CAN, ST-Link debugger etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>

	\|documentation=		\|documentation=

Piotrzbysinski: Created page with "{{Product|category1=SOM|category2=|image=StarCB-STM32H757-STD.png |cb_som_compatibility=StarSOM-STM32H757 module with STM32H757 microcontroller |cb_som_socket=Square b2b |cb_display_connector=MIPI-DSI (FPC30) |cb_network=1x Ethernet 10/100/1000 Mbit/s, RJ45 |cb_usb=USB 2.0 host x1, USB-OTG 2.0 x1 |cb_debugger=JTAG connector for external debugger |cb_console_interface=SWDAP and vCOM (console port) |cb_switches=4+1 (reset) |cb_leds=4 + 1 (power) |cb_connectors= 3 sections..."

2026-02-11T14:54:10Z

Created page with "{{Product|category1=SOM|category2=|image=StarCB-STM32H757-STD.png |cb_som_compatibility=StarSOM-STM32H757 module with STM32H757 microcontroller |cb_som_socket=Square b2b |cb_display_connector=MIPI-DSI (FPC30) |cb_network=1x Ethernet 10/100/1000 Mbit/s, RJ45 |cb_usb=USB 2.0 host x1, USB-OTG 2.0 x1 |cb_debugger=JTAG connector for external debugger |cb_console_interface=SWDAP and vCOM (console port) |cb_switches=4+1 (reset) |cb_leds=4 + 1 (power) |cb_connectors= 3 sections..."

New page

{{Product|category1=SOM|category2=|image=StarCB-STM32H757-STD.png
|cb_som_compatibility=StarSOM-STM32H757 module with STM32H757 microcontroller
|cb_som_socket=Square b2b
|cb_display_connector=MIPI-DSI (FPC30)
|cb_network=1x Ethernet 10/100/1000 Mbit/s, RJ45
|cb_usb=USB 2.0 host x1, USB-OTG 2.0 x1
|cb_debugger=JTAG connector for external debugger
|cb_console_interface=SWDAP and vCOM (console port)
|cb_switches=4+1 (reset)
|cb_leds=4 + 1 (power)
|cb_connectors= 3 sections of GPIO
|cb_rtc_backup=CR2032 battery
|cb_power_supply=External 9-12V DC
|dim=160mm x 100mm x 22mm
|description=StarCBSTM32H757-STD is a carrier board for the StarSOM-STM32H757 family of computer-on-modules, which are powered by STM32H757 MCU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as audio codec, USB, Ethernet, UART, RS485, CAN, ST-Link debugger etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>

|documentation=
{{DocBox|boxwidth=21|system=Documentation
|
content= 
*[[StarCB-STM32H757-STD Datasheet and Pinout|StarCB-STM32H757-STD Datasheet and Pinout]]
__WP_Files(5350)
}}
}}