Piotrzbysinski: Created page with "{{PageHeader|StarSBC-6ULL Datasheet and Pinout}} toc jzpdf == General description == center The StarSBC-6ULL family is a small s..."

2022-12-08T09:28:32Z

Created page with "{{PageHeader|StarSBC-6ULL Datasheet and Pinout}} __toc__ __jzpdf__ == General description == 500px|center The StarSBC-6ULL family is a small s..."

New page

{{PageHeader|StarSBC-6ULL Datasheet and Pinout}} __toc__
__jzpdf__
== General description ==
[[File:StarSOM-6ULL-intro.jpg|500px|center]]

The StarSBC-6ULL family is a small size and low profile SoM based on the NXP i.MX6 ULL application processor, which features an advanced implementation of a single ARM Cortex-A7 core (at speeds up to 900MHz).

The StarSBC-6ULL is a low power highly integrated SoM (System on Module) featuring high computation power, on-board Ethernet PHY 10/100, 802.11b/g/n Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The StarSOM-6ULL provides a variety memory configuration including flexible range of DDR3L, and eMMC Flash that meets our customers requirements.

The SoM supports connections to a variety of interfaces: two high-speed USB on-the-go with PHY, dual Ethernet (single PHY on-board), audio, display with touch panel and serial interfaces. In addition, the system supports industrial grade targeting embedded application.

SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.

=== Applications ===
* Industrial embedded Linux computer
* Home Appliances
* Home Automation – Smart Home
* Human-machine Interfaces (HMI)
* Point-of-sales (POS) terminals
* Cash Register
* 2D barcode scanners and printers
* Smart grid infrastructure
* IoT gateways
* Residential gateways
* Machine vision equipment
* Robotics
* Fitness/outdoor equipment

== Features ==
* Powered by NXP i.MX 6ULL application processor
* Core clock up to 900MHz
* Up to 1GB RAM DDR3L
* Up to 32GB eMMC
* Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v5.1 module
* Power-efficient and cost-optimized solution
* Ideal for industrial IoT and embedded applications
* Integrated security features

== Pictures of SBC versions ==
{| class="wikitable"
|-
! Version !! Photo
|-
| eMMC ||
[[File:StarSOM-6ull-emmc-top-bottom.jpg|center|thumb]]
|}

{| class="frame-green"
|-
| Wi-Fi and Ethernet PHY10/100 are available as an options.
|}

== Ordering info ==
__orderingInfoStart__
[
{
"name" : "Product type",
"type" : "selector",
"symbol" : "SLS",
"values" : [
{"value" : "SLS",
"description" : "System on Module"}
]
},
{
"name" : "SOM Name",
"type" : "selector",
"symbol" : "0",
"values" : [
{"value" : "0",
"description" : "StarSOM board-to-board connectors"}
]
},
{
"name" : "CPU Family",
"type" : "selector",
"symbol" : "6",
"values" : [
{"value" : "6",
"description" : "i.MX6"}
]
},
{
"name" : "CPU Type",
"type" : "selector",
"symbol" : "Y2",
"values" : [
{"value" : "Y2", "description" : "i.MX6 ULL Y2"}
]
},
{
"type" : "separator",
"value" : "_"
},
{
"name" : "CPU Clock Speed",
"type" : "selector",
"symbol" : "Clock",
"values" : [
{"value" : "528C", "description" : "528MHz"},
{"value" : "792C", "description" : "792MHz"},
{"value" : "900C", "description" : "900MHz"}
]
},
{
"type" : "separator",
"value" : "_"
},
{
"name" : "DDR3 RAM Size",
"type" : "selector",
"symbol" : "RamSize",
"values" : [
{"value" : "128R", "description" : "128MB"},
{"value" : "256R", "description" : "256MB"},
{"value" : "512R", "description" : "512MB"}
]
},
{
"type" : "separator",
"value" : "_"
},
{
"name" : "Flash Size Type and Density",
"type" : "selector",
"symbol" : "FlashSize",
"values" : [
{"value" : "04GE", "description" : "4GB eMMC"},
{"value" : "08GE", "description" : "8GB eMMC"},
{"value" : "16GE", "description" : "16GB eMMC"},
{"value" : "32GE", "description" : "32GB eMMC"}
]
},
{
"type" : "separator",
"value" : "_"
},
{
"name" : "Special Features",
"type" : "selector",
"symbol" : "SF",
"values" : [
{"value" : "0SF", "description" : "No Special Features"},
{"value" : "1WB", "description" : "Built-in Murata 802.11b/g/n Wi-Fi and Bluetooth v5.1 Module"},
{"value" : "2ET", "description" : "Built-in Microchip 100Mb Ethernet PHY"},
{"value" : "3WE", "description" : "Built-in Murata 802.11b/g/n Wi-Fi/Bluetooth v5.1 and Microchip 100Mb Ethernet PHY"}
]
},
{
"type" : "separator",
"value" : "_"
},
{
"name" : "Operating Temperature",
"type" : "selector",
"symbol" : "TEMP",
"values" : [
{"value" : "C", "description" : "Consumer: 0 to +70 C "},
{"value" : "E", "description" : "Extended with Wi-Fi: -25 to +70 C"},
{"value" : "I", "description" : "Industrial: -40 to +85 C"}
]
}

]
__orderingInfoEnd__

== Block Diagram ==
[[File:StarBC-6ULL-block_diagram.png|center]]

== Operating ranges ==
{| class="wikitable"
! Parameter
! Value
! Unit
! Comment
|-
| Power Supply
| <center>3.3</center>
| <center>V</center>
| Connected to +3V3IN pins
|-
| Input GPIO voltage
| <center>3.3</center>
| <center>V</center>
| -
|-
| rowspan="3" | Environment temperature1
| <center>-40…+85</center>
| rowspan="3" | oC
| Industrial range w/o WiFi module
|-
| <center>-25…+70</center>
| Industrial range with WiFi module
|-
| <center>0…+70</center>
| Consumer range
|}
Note: 
1. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version). 

== Electrical parameters ==
{| class="wikitable"
! rowspan="2" | SOM signal name
! rowspan="2" | Parameter
! colspan="3" | Value
! rowspan="2" | Units
|-
| Min.
| Typ.
| Max.
|-
| +3V3IN
| Supply Voltage
| 3.15
| 3.3
| 3.45
| V
|-
| +3V3IN
| Total Supply Current1
| -
| 175
| 255
| mA
|-
| VGPIO
| GPIO Input Voltage
| 0
| 3.3
| 3.62
| V
|-
| +3V3SW
| Output current of 3.3V power supply for peripherals 
| -
| -
| 0.2
| A
|-
| USB-OTGx-VBUS
| USB Supply
| 4.40
| -
| 5.5
| V
|-
| VDD-COIN-3V
| SNVS Backup Battery Supply
| 2.66
| -
| 3.6
| V
|-
| -
| ADC Inputs Voltage
| 0
| -
| 3.3
| V
|}
Notes: 
1. Excluding external load connected to +3.3VOUT lines. 
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V. 

== SBC pinout ==
StarSOM-6ULL board-to-board connectors view (top view) 
[[File:StarSOM-6ULL-connectors.png]]

{| class="wikitable"
|-
! SoM pin number
! Default function
! GPIO
! BGA289 ball
! Notes
|-
| colspan="5" | <center>J101</center>
|-
| 1
| GND
| -
| -
|
|-
| 2
| GND
| -
| -
|
|-
| 26
| LCD.RES
| GPIO3.04
| E9
|
|-
| 28
| I2C2.SDA
| GPIO1.31
| G13
| Internally pull-uped with 4.7k connected to 3.3V
|-
| 30
| I2C2.SCL
| GPIO1.30
| F17
| Internally pull-uped with 4.7k connected to 3.3V
|-
| 32
| GPIO1.01
| GPIO1.01
| L15
|
|-
| 34
| GPIO1.02
| GPIO1.02
| L14
|
|-
| 36
| GPIO1.03
| GPIO1.03
| L17
|
|-
| 38
| GPIO1.04
| GPIO1.04
| M16
|
|-
| 39
| GND
| -
| -
|
|-
| 40
| GND
| -
| -
|
|-
| 41
| VDD.EMMC
| -
| -
| Internal 1.8V LDO output as reference or power supply voltage for QSPI (SDIO) interface
|-
| 42
| LCD.CLK
| GPIO3.00
| A8
|
|-
| 43
| QSPI.CLK
| GPIO4.11
| D5
| Line referenced to VDD.EMMC power supply (1.8V)
|-
| 44
| GND
| -
| -
|
|-
| 45
| QSPI.CS0
| GPIO4.16
| E6
| Line referenced to VDD.EMMC power supply (1.8V)
|-
| 46
| LCD.VSYNC
| GPIO3.03
| C9
|
|-
| 47
| QSPI.D0
| GPIO4.12
| A3
| Line referenced to VDD.EMMC power supply (1.8V)
|-
| 48
| LCD.HSYNC
| GPIO3.02
| D9
|
|-
| 49
| QSPI.D1
| GPIO4.13
| C5
| Line referenced to VDD.EMMC power supply (1.8V)
|-
| 50
| LCD.ENABLE
| GPIO3.01
| B8
|
|-
| 51
| QSPI.D2
| GPIO4.14
| B5
| Line referenced to VDD.EMMC power supply (1.8V)
|-
| 52
| LCD.DATA23
| GPIO3.28
| B16
|
|-
| 53
| QSPI.D3
| GPIO4.15
| A4
| Line referenced to VDD.EMMC power supply (1.8V)
|-
| 54
| LCD.DATA22
| GPIO3.27
| A14
|
|-
| 55
| QSPI.DQS
| GPIO4.10
| B4
| Line referenced to VDD.EMMC power supply (1.8V)
|-
| 56
| LCD.DATA21
| GPIO3.26
| B14
|
|-
| 57
| GND
| -
| -
|
|-
| 58
| LCD.DATA20
| GPIO3.25
| C14
|
|-
| 59
| BT.PCMCLK
| GPIO4.26
| D3
| BT-BLE interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 60
| LCD.DATA19
| GPIO3.24
| D14
|
|-
| 61
| BT.PCMOUT
| GPIO4.27
| D2
| BT-BLE interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 62
| LCD.DATA18
| GPIO3.23
| A13
|
|-
| 63
| BT.PCMIN
| GPIO4.28
| D1
| BT-BLE interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 64
| LCD.DATA17
| GPIO3.22
| B13
|
|-
| 65
| BT.PCMSYNC
| GPIO4.25
| D4
| BT-BLE interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 66
| LCD.DATA16
| GPIO3.21
| C13
|
|-
| 67
| BT.RTS
| GPIO4.23
| E2
| BT-BLE interface connection - UART5 (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 68
| LCD.DATA15
| GPIO3.20
| D13
|
|-
| 69
| BT.CTS
| GPIO4.24
| E1
| BT-BLE interface connection - UART5 (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 70
| LCD.DATA14
| GPIO3.19
| A12
|
|-
| 71
| BT.TXD
| GPIO4.22
| E3
| BT-BLE interface connection - UART5 (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 72
| LCD.DATA13
| GPIO3.18
| B12
|
|-
| 73
| BT.RXD
| GPIO4.21
| E4
| BT-BLE interface connection - UART5 (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 74
| LCD.DATA12
| GPIO3.17
| C12
|
|-
| 75
| BT.WAKE
| GPIO4.20
| F3
| BT-BLE interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 76
| LCD.DATA11
| GPIO3.16
| D12
|
|-
| 77
| BT.HWAKE
| GPIO4.19
| F2
| BT-BLE interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 78
| LCD.DATA10
| GPIO3.15
| E12
|
|-
| 79
| BT.ENABLE
| GPIO4.17
| F5
| BT-BLE interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 80
| LCD.DATA09
| GPIO3.14
| A11
|
|-
| 81
| WLAN.HWAKE
| GPIO4.18
| E5
| WiFi interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 82
| LCD.DATA08
| GPIO3.13
| B11
|
|-
| 83
| WLAN.EN
| GPIO1.08
| N17
| WiFi interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 84
| LCD.DATA07
| GPIO3.12
| D11
|
|-
| 85
| GND
| -
| -
|
|-
| 86
| LCD.DATA06
| GPIO3.11
| A10
|
|-
| 87
| SDIO1.CLK
| GPIO2.17
| C1
| WiFi interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 88
| LCD.DATA05
| GPIO3.10
| B10
|
|-
| 89
| SDIO1.CMD
| GPIO2.16
| C2
| WiFi interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 90
| LCD.DATA04
| GPIO3.09
| C10
|
|-
| 91
| SDIO1.D2
| GPIO2.20
| B1
| WiFi interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 92
| LCD.DATA03
| GPIO3.08
| D10
|
|-
| 93
| SDIO1.D0
| GPIO2.18
| B3
| WiFi interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 94
| LCD.DATA02
| GPIO3.07
| E10
|
|-
| 95
| SDIO1.D3
| GPIO2.21
| A2
| WiFi interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 96
| LCD.DATA01
| GPIO3.06
| A9
|
|-
| 97
| SDIO1.D1
| GPIO2.19
| B2
| WiFi interface connection (if 1DX modules used) If 1DX modules is not used alternative pin functions (incl. GPIO) available
|-
| 98
| LCD.DATA00
| GPIO3.05
| B9
|
|-
| 99
| GND
| -
| -
|
|-
| 100
| GND
| -
| -
|
|-
| colspan="5" | <center>J100</center>
|-
| 1
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 2
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 3
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 4
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 5
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 6
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 7
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 8
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 9
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 10
| +3V3IN
| -
| -
| External power supply 3.3V
|-
| 11
| GND
| -
| -
|
|-
| 12
| GND
| -
| -
|
|-
| 13
| GND
| -
| -
|
|-
| 14
| GND
| -
| -
|
|-
| 15
| GND
| -
| -
|
|-
| 16
| GND
| -
| -
|
|-
| 17
| PMIC-ON-REQ
|
|
|
|-
| 18
| ON-OFF
| ON-OFF
| R8
|
|-
| 19
| PMIC-STBY-REQ
| PMIC-STBY-REQ
| U9
|
|-
| 20
| POR
| POR
| P8
| Power-on-reset input-output
|-
| 21
| VDD-3V3-SNVS
| VDD-SNVS-IN
| P12
| SNVS domain power supply External 3.3V connection power supply is necessary
|-
| 22
| RECOVERY
|
|
| System recovery pin: RECOVERY=0 during reset -> start recovery mode RECOVERY=1 or not connected -> normal operation mode
|-
| 23
| GND
| -
| -
|
|-
| 24
| RESET.IN
| -
| -
| System reset
|-
| 25
| UART4.RXD
| GPIO1.29
| G16
| Default Linux console RxD line
|-
| 26
| GND
| -
| -
|
|-
| 27
| UART4.TXD
| GPIO1.28
| G17
| Default Linux console TxD line
|-
| 28
| TAMPER.0
| GPIO5.00
| R10
|
|-
| 29
| +3V3SW
| -
| -
| Reference 3.3V power supply for external peripherals, maximum load 200 mA
|-
| 30
| TAMPER.1
| GPIO5.01
| R9
|
|-
| 32
| TAMPER.2
| GPIO5.02
| P11
|
|-
| 34
| TAMPER.3
| GPIO5.03
| P10
|
|-
| 36
| TAMPER.4
| GPIO5.04
| P9
|
|-
| 37
| GND
| -
| -
|
|-
| 38
| TAMPER.5
| GPIO5.05
| N8
|
|-
| 39
| USB2.VBUS
|
| U12
|
|-
| 40
| TAMPER.6
| GPIO5.06
| N11
|
|-
| 41
| USB2.DN
| -
| T13
|
|-
| 42
| TAMPER.7
| GPIO5.07
| N10
|
|-
| 43
| USB2.DP
| -
| U13
|
|-
| 44
| TAMPER.8
| GPIO5.08
| N9
|
|-
| 45
| GND
| -
| -
|
|-
| 46
| TAMPER.9
| GPIO5.09
| R6
|
|-
| 47
| GPIO1.05
| GPIO1.05
| M17
|
|-
| 48
| GND
| -
| -
|
|-
| 49
| USB1.VBUS
| -
| T12
|
|-
| 50
| JTAG.TCK
| GPIO1.14
| M14
| Optionally used as 32kHz clock source for 1DX radio module
|-
| 51
| USB1.DN
| -
| T15
|
|-
| 52
| JTAG.TDI
| GPIO1.13
| N16
|
|-
| 53
| USB1.DP
| -
| U15
|
|-
| 54
| JTAG.TDO
| GPIO1.12
| N15
|
|-
| 55
| GND
| -
| -
|
|-
| 56
| JTAG.TMS
| GPIO1.11
| P14
|
|-
| 57
| USB1.ID
| GPIO1.00
| K13
|
|-
| 58
| JTAG.TRST
| GPIO1.15
| N14
|
|-
| 60
| GND
| -
| -
|
|-
| 62
| UART1.CTS
| GPIO1.18
| K15
|
|-
| 63
| GND
| -
| -
|
|-
| 64
| UART1.RTS
| GPIO1.19
| J14
|
|-
| 65
| ENET2.TX-CLK
| GPIO2.14
| D17
|
|-
| 66
| UART1.RXD
| GPIO1.17
| K16
|
|-
| 67
| ENET2.TXD1
| GPIO2.12
| A16
|
|-
| 68
| UART1.TXD
| GPIO1.16
| K14
|
|-
| 69
| ENET2.TXD0
| GPIO2.11
| A15
|
|-
| 70
| UART2.CTS
| GPIO1.22
| J15
|
|-
| 71
| ENET2.TXEN
| GPIO2.13
| B15
|
|-
| 72
| UART2.RTS
| GPIO1.23
| H14
|
|-
| 73
| ENET2.RXER
| GPIO2.15
| D16
|
|-
| 74
| UART2.RXD
| GPIO1.21
| J16
|
|-
| 75
| ENET2.RXEN
| GPIO2.10
| B17
|
|-
| 76
| UART2.TXD
| GPIO1.20
| J17
|
|-
| 77
| ENET2.RXD0
| GPIO2.08
| C17
|
|-
| 78
| UART3.CTS
| GPIO1.26
| H15
|
|-
| 79
| ENET2.RXD1
| GPIO2.09
| C16
|
|-
| 80
| UART3.RTS
| GPIO1.27
| G14
|
|-
| 81
| ENET.MDC
| GPIO1.07
| L16
|
|-
| 82
| UART3.RXD
| GPIO1.25
| H16
|
|-
| 83
| ENET.MDIO
| GPIO1.06
| K17
|
|-
| 84
| UART3.TXD
| GPIO1.24
| H17
|
|-
| 85
| GND
| -
| -
|
|-
| 86
| GND
| -
| -
|
|-
| 87
| ENET1.LED0
| -
| -
| LED0/nWAYEN - output PHY signal (LED cathode)
|-
| 89
| ENET1.LED1
| -
| -
| LED0/SPEED - output PHY signal (LED cathode)
|-
| 91
| ENET1.RXN
| -
| -
| Rx_n - external Ethernet trafo connector
|-
| 93
| ENET1.RXP
| -
| -
| Rx_p - external Ethernet trafo connector
|-
| 95
| ENET1.TXN
| -
| -
| Tx_n - external Ethernet trafo connector
|-
| 97
| ENET1.TXP
| -
| -
| Tx_p - external Ethernet trafo connector
|-
| 99
| GND
| -
| -
|
|-
| 100
| GND
| -
| -
|
|-
| -
| JTAG.MOD
| GPIO1.10
| P15
| Used as hardware reset Ethernet of PHY with 4.7k pull-down resistor
|-
| -
| BOOT.MODE1
| -
| U10
| Permanently connected to GND
|}

== Dimensions ==
[[File:StarSOM-6ULL-dimensions.png|center]]

StarSBM-6ULL Datasheet and Pinout - Revision history

Piotrzbysinski: Created page with "{{PageHeader|StarSBC-6ULL Datasheet and Pinout}} __toc__ __jzpdf__ == General description == center The StarSBC-6ULL family is a small s..."

Piotrzbysinski: Created page with "{{PageHeader|StarSBC-6ULL Datasheet and Pinout}} toc jzpdf == General description == center The StarSBC-6ULL family is a small s..."