VisionCB-6ULL-IND v.1.0 Datasheet and Pinout - Revision history

Piotrzbysinski: /* Electrical parameters */

2020-07-09T13:10:45Z

Electrical parameters

← Older revision		Revision as of 13:10, 9 July 2020
Line 79:		Line 79:
	\| Power Supply (Con100 input)		\| Power Supply (Con100 input)
	\| 9.0		\| 9.0
	~~\| 11.0~~
	\| 12.0		\| 12.0
			\| 15.0
	\| V		\| V
	\| Polarized terminal block connector		\| Polarized terminal block connector

Pawelzbysinski at 12:00, 7 June 2019

2019-06-07T12:00:47Z

← Older revision		Revision as of 12:00, 7 June 2019
Line 4:		Line 4:
	[[File:VisionCB-IND-1-4-1k.png\|center\|400px]]		[[File:VisionCB-IND-1-4-1k.png\|center\|400px]]
	VisionCB-6ULL-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.		VisionCB-6ULL-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

	The carrier board connects with the SoM via a standard SODIMM connector.		The carrier board connects with the SoM via a standard SODIMM connector.

Pawelzbysinski at 21:44, 6 June 2019

2019-06-06T21:44:47Z

← Older revision		Revision as of 21:44, 6 June 2019
Line 4:		Line 4:
	[[File:VisionCB-IND-1-4-1k.png\|center\|400px]]		[[File:VisionCB-IND-1-4-1k.png\|center\|400px]]
	VisionCB-6ULL-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.		VisionCB-6ULL-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

	The carrier board connects with the SoM via a standard SODIMM connector.		The carrier board connects with the SoM via a standard SODIMM connector.

Pawelzbysinski: /* Features */

2018-12-28T15:46:38Z

Features

← Older revision		Revision as of 15:46, 28 December 2018
Line 34:		Line 34:
	** 1x Ethernet 10/100Mbit/s, RJ45		** 1x Ethernet 10/100Mbit/s, RJ45
	** 2x USB Host Type A connectors		** 2x USB Host Type A connectors
	** 1x USB OTG Micro AB connector
	* Display Interface: 50-pin FFC/FPC Parallel RGB – 24-bit, (1366 x 768 Max. Resolution)		* Display Interface: 50-pin FFC/FPC Parallel RGB – 24-bit, (1366 x 768 Max. Resolution)
	*Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)		*Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)

Pawelzbysinski: /* Features */

2018-12-28T15:46:07Z

Features

← Older revision		Revision as of 15:46, 28 December 2018
Line 31:		Line 31:
	* Expansion Connectors:		* Expansion Connectors:
	**2x25 Pin Headers (Female)		**2x25 Pin Headers (Female)
	**microSD Card socket
	* Communication Connectors:		* Communication Connectors:
	** 1x Ethernet 10/100Mbit/s, RJ45		** 1x Ethernet 10/100Mbit/s, RJ45
Line 40:		Line 39:
	* Power Supply		* Power Supply
	** Terminal block connector: Input Voltage 9-12V DC		** Terminal block connector: Input Voltage 9-12V DC
	* Temperature Range: 0 to +~~70°C~~		* Temperature Range: -40 to +85°C
	* Board Size: 98mm x 79mm x 22mm		* Board Size: 98mm x 79mm x 22mm

Pawelzbysinski at 15:52, 27 December 2018

2018-12-27T15:52:04Z

← Older revision		Revision as of 15:52, 27 December 2018
Line 1:		Line 1:
	{{PageHeader\|VisionCB-IND Datasheet and Pinout}} __toc__		{{PageHeader\|VisionCB-6ULL-IND v.1.0 Datasheet and Pinout}} __toc__
	__jzpdf__		__jzpdf__
	== General description ==		== General description ==
	[[File:VisionCB-IND-1-4-1k.png\|center\|400px]]		[[File:VisionCB-IND-1-4-1k.png\|center\|400px]]
	VisionCB-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.		VisionCB-6ULL-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

	The carrier board connects with the SoM via a standard SODIMM connector.		The carrier board connects with the SoM via a standard SODIMM connector.
Line 43:		Line 43:
	* Board Size: 98mm x 79mm x 22mm		* Board Size: 98mm x 79mm x 22mm

	== Pictures of VisionCB-IND board ==		== Pictures of VisionCB-6ULL-IND board ==
	{\| class="wikitable"		{\| class="wikitable"
	\|-		\|-
	! Version !! Photo		! Version !! Photo
	\|-		\|-
	\| VisionCB-IND board only \|\|		\| VisionCB-6ULL-IND board only \|\|
	[[File:VisionCB-IND-1-4-1k.png\|center\|thumb]]		[[File:VisionCB-IND-1-4-1k.png\|center\|thumb]]
	\|-		\|-
	\| VisionCB-IND board with VisionSOM-6ULL \|\|		\| VisionCB-6ULL-IND board with VisionSOM-6ULL \|\|
	[[File:VisionCB-IND-1-4-z-SOM-1k.png\|center\|thumb]]		[[File:VisionCB-IND-1-4-z-SOM-1k.png\|center\|thumb]]
	\|}		\|}
Line 60:		Line 60:
	{		{
	"type" : "separator",		"type" : "separator",
	"value" : "VisionCB-IND"		"value" : "VisionCB-6ULL-IND v.1.0"
	}		}
	]		]

Pawelzbysinski: Created page with "{{PageHeader|VisionCB-IND Datasheet and Pinout}} toc jzpdf == General description == 400px VisionCB-IND is a carrier board for..."

2018-12-27T15:50:42Z

Created page with "{{PageHeader|VisionCB-IND Datasheet and Pinout}} __toc__ __jzpdf__ == General description == center|400px VisionCB-IND is a carrier board for..."

New page

{{PageHeader|VisionCB-IND Datasheet and Pinout}} __toc__
__jzpdf__
== General description ==
[[File:VisionCB-IND-1-4-1k.png|center|400px]]
VisionCB-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector.

=== Applications ===
* Industrial embedded Linux computer
* Home Appliances
* Home Automation – Smart Home
* Human-machine Interfaces (HMI)
* Point-of-sales (POS) terminals
* Cash Register
* 2D barcode scanners and printers
* Smart grid Infrastructure
* IoT gateways
* Residential getaways
* Machine vision equipment
* Robotics
* Fitness/outdoor equipment

== Features ==
* Industrial grade Carrier Board (Base Board) compatible with the VisionSOM family of modules based on NXP i.MX 6UL / 6ULL application processors
* Core clock up to 696MHz (VisionSOM-6UL) or up to 900MHz (VisionSOM-6ULL)
* Up to 512MB SDRAM DDR3L (depends on used VisionSOM module)
* Up to 512MB NAND Flash / 32GB eMMC / uSD memory card (depends on used VisionSOM module)
* Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.1+EDR module
* SoM Interface: SODIMM200
* Expansion Connectors:
**2x25 Pin Headers (Female)
**microSD Card socket
* Communication Connectors:
** 1x Ethernet 10/100Mbit/s, RJ45
** 2x USB Host Type A connectors
** 1x USB OTG Micro AB connector
* Display Interface: 50-pin FFC/FPC Parallel RGB – 24-bit, (1366 x 768 Max. Resolution)
*Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)
* Power Supply
** Terminal block connector: Input Voltage 9-12V DC
* Temperature Range: 0 to +70°C
* Board Size: 98mm x 79mm x 22mm

== Pictures of VisionCB-IND board ==
{| class="wikitable"
|-
! Version !! Photo
|-
| VisionCB-IND board only ||
[[File:VisionCB-IND-1-4-1k.png|center|thumb]]
|-
| VisionCB-IND board with VisionSOM-6ULL ||
[[File:VisionCB-IND-1-4-z-SOM-1k.png|center|thumb]]
|}

== Ordering info ==
__orderingInfoStart__
[
{
"type" : "separator",
"value" : "VisionCB-IND"
}
]
__orderingInfoEnd__

== Block Diagram ==
[[File:CB-IND-blokowy-1-4.png|center|900px]]

== Electrical parameters ==
{| class="wikitable"
! rowspan="2" style="text-align: center; font-weight: bold;" | Parameter
! colspan="3" style="text-align: center; font-weight: bold;" | Value
! rowspan="2" style="text-align: center; font-weight: bold;" | Units
! rowspan="2" style="text-align: center; font-weight: bold;" | Comment
|-
| Min.
| Typ.
| Max.
|-
| Power Supply (Con100 input)
| 9.0
| 11.0
| 12.0
| V
| Polarized terminal block connector
|-
| Supply current
| -
| -
| 0.15
| A
| Excluding LCD, USB and antoher external loads
|-
| Output GPIO voltage (Con1)
| 0
| -
| 3.3
| V
| GPIO connector (current limited; max <250mA [RMS])
|}

== Onboard LEDs ==
[[File:VisionCB-IND-1-4-LEDs.png|center|400px]]

{| class="wikitable"
! style="text-align: center; font-weight: bold;" | LED
! style="text-align: center; font-weight: bold;" | Color
! style="text-align: center; font-weight: bold;" | Description
|-
| LED100 (PWR)
| Green
| Power indicator
|-
| LED200 (USB OVR)
| Red
| USB Overcurrent indicator
|-
|}

== 2x25 pin header ==
[[File:VisionCB-IND-1-4-GPIO.png|center|400px]]

{| class="wikitable"
! style="text-align: center; font-weight: bold;" | J504 Pin
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | Description
|-
| 1
| CSI-HSYNC
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 2
| CSI-VSYNC
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 3
| CSI-DATA0
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 4
| CSI-DATA2
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 5
| CSI-DATA1
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 6
| CSI-DATA3
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 7
| CSI-DATA4
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 8
| CSI-DATA5
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 9
| CSI-MCLK
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 10
| CSI-DATA7
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 11
| CSI_PIXCLK
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 12
| CSI-DATA6
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
| 13
| ENET2_TXD0
| Default: ENET2 TXD0 line or universal GPIO with 3.3V logic levels.
|-
| 14
| UART3-RTS
| Default: UART3 RTS line or universal GPIO with 3.3V logic levels.
|-
| 15
| ENET2_TXEN
| Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels.
|-
| 16
| UART2-RTS
| Default: UART2 RTS line or universal GPIO with 3.3V logic levels.
|-
| 17
| ENET2_CRS_DV
| Default: ENET2 CRS_DV line or universal GPIO with 3.3V logic levels.
|-
| 18
| UART3-CTS
| Default: UART3 CTS line or universal GPIO with 3.3V logic levels.
|-
| 19
| ENET2_RXD1
| Default: ENET2 RXD1 line or universal GPIO with 3.3V logic levels.
|-
| 20
| UART1-RTS
| Default: UART1 RTS line or universal GPIO with 3.3V logic levels.
|-
| 21
| ENET2_RXER
| Default: ENET2 RXER line or universal GPIO with 3.3V logic levels.
|-
| 22
| UART2-CTS
| Default: UART2 CTS line or universal GPIO with 3.3V logic levels.
|-
| 23
| ENET2_TX_CLK
| Default: ENET2 TX_CLK line or universal GPIO with 3.3V logic levels.
|-
| 24
| UART1-CTS
| Default: UART1 CTS line or universal GPIO with 3.3V logic levels.
|-
| 25
| UART4-RXD
| Default: UART4 RXD input or universal GPIO with 3.3V logic levels.
|-
| 26
| JTAG-TCK
| Default: JTAG TCK input or universal GPIO with 3.3V logic levels.
|-
| 27
| UART4-TXD
| Default: UART4 TXD output or universal GPIO with 3.3V logic levels.
|-
| 28
| JTAG-nTRST
| JTAG TRST input line (active L).
|-
| 29
| UART3-RXD
| Default: UART3 RxD input or universal GPIO with 3.3V logic levels.
|-
| 30
| JTAG-TMS
| Default: JTAG TMS output or universal GPIO with 3.3V logic levels.
|-
| 31
| UART2-RXD
| Default: UART2 RXD input or universal GPIO with 3.3V logic levels.
|-
| 32
| SNVS-TAMPER2
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
| 33
| UART2-TXD
| Default: UART2 TXD input or universal GPIO with 3.3V logic levels.
|-
| 34
| SNVS-TAMPER3
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
| 35
| UART1-RXD
| Default: UART1 RXD input or universal GPIO with 3.3V logic levels.
|-
| 36
| SNVS-TAMPER4
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
| 37
| UART1-TXD
| Default: UART1 TXD input or universal GPIO with 3.3V logic levels.
|-
| 38
| SNVS-TAMPER5
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
| 39
| SNVS-TAMPER0
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
| 40
| I2C-SCL
| Universal GPIO with 3.3V logic levels.
|-
| 41
| SNVS-TAMPER1
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
| 42
| I2C-SDA
| Universal GPIO with 3.3V logic levels.
|-
| 43
| GPIO5
| Default: General purpose pin GPIO5
|-
| 44
| JTAG-TDI
| Default: JTAG TDI input or universal GPIO with 3.3V logic levels.
|-
| 45
| GPIO8
| Default: General purpose pin GPIO8
|-
| 46
| GPIO9
| Default: General purpose pin GPIO9
|-
| 47
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
|-
| 48
| GND
| Ground
|-
| 49
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
|-
| 50
| GND
| Ground
|}

== TFT LCD connector (RGB 24b, J405) ==
[[File:VisionCB-IND-1-4-lcd.png|center|400px]]

{| class="wikitable"
! style="text-align: center; font-weight: bold;" | J400 pin
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | LCD interface name
|-
| 1
| LCD-DATA0
| LCD-B0
|-
| 2
| LCD-DATA1
| LCD-B1
|-
| 3
| LCD-DATA2
| LCD-B2
|-
| 4
| LCD-DATA3
| LCD-B3
|-
| 5
| LCD-DATA4
| LCD-B4
|-
| 6
| LCD-DATA5
| LCD-B5
|-
| 7
| LCD-DATA6
| LCD-B6
|-
| 8
| LCD-DATA7
| LCD-B7
|-
| 9
| GND
| GND
|-
| 10
| LCD-DATA8
| LCD-G0
|-
| 11
| LCD-DATA9
| LCD-G1
|-
| 12
| LCD-DATA10
| LCD-G2
|-
| 13
| LCD-DATA11
| LCD-G3
|-
| 14
| LCD-DATA12
| LCD-G4
|-
| 15
| LCD-DATA13
| LCD-G5
|-
| 16
| LCD-DATA14
| LCD-G6
|-
| 17
| LCD-DATA15
| LCD-G7
|-
| 18
| GND
| GND
|-
| 19
| LCD-DATA16
| LCD-R0
|-
| 20
| LCD-DATA17
| LCD-R1
|-
| 21
| LCD-DATA18
| LCD-R2
|-
| 22
| LCD-DATA19
| LCD-R3
|-
| 23
| LCD-DATA20
| LCD-R4
|-
| 24
| LCD-DATA21
| LCD-R5
|-
| 25
| LCD-DATA22
| LCD-R6
|-
| 26
| LCD-DATA23
| LCD-R7
|-
| 27
| GND
| GND
|-
| 28
| LCD-DE
| DE
|-
| 29
| LCD-HSYNC
| HSYNC
|-
| 30
| LCD-VSYNC
| VSYNC
|-
| 31
| GND
| GND
|-
| 32
| LCD-PCLK
| DCLK
|-
| 33
| GND
| GND
|-
| 34
| GPIO4
| TS-YPUL
|-
| 35
| GPIO3
| TS-YNUR
|-
| 36
| GPIO2
| TS-YPLL
|-
| 37
| GPIO1
| TS-YNLR
|-
| 38
| -
| -
|-
| 39
| -
| -
|-
| 40
| -
| -
|-
| 41
| -
| -
|-
| 42
| UART5-TXD
| I2C-SCL
|-
| 43
| UART5-RXD
| I2C-SDA
|-
| 44
| GND
| GND
|-
| 45
| VCC-LCD
| +3.3V (controlled by ENET2_TXEN)
|-
| 46
| VCC-LCD
| +3.3V (controlled by ENET2_TXEN)
|-
| 47
| VCC-5V0
| +5.0V
|-
| 48
| VCC-5V0
| +5.0V
|-
| 49
| LCD-RESET
| RESET
|-
| 50
| JTAG-nTRST
| PWREN
|}

== Dimensions ==
[[File:VisionCB-IND-1-4-PCB-size.png|center|600px]]

VisionCB-6ULL-IND v.1.0 Datasheet and Pinout - Revision history

Piotrzbysinski: /* Electrical parameters */

Pawelzbysinski at 12:00, 7 June 2019

Pawelzbysinski at 21:44, 6 June 2019

Pawelzbysinski: /* Features */

Pawelzbysinski: /* Features */

Pawelzbysinski at 15:52, 27 December 2018

Pawelzbysinski: Created page with "{{PageHeader|VisionCB-IND Datasheet and Pinout}} __toc__ __jzpdf__ == General description == 400px VisionCB-IND is a carrier board for..."

Pawelzbysinski: Created page with "{{PageHeader|VisionCB-IND Datasheet and Pinout}} toc jzpdf == General description == 400px VisionCB-IND is a carrier board for..."