VisionCB-IND-HDMI Datasheet and Pinout - Revision history

Wlodzimierzhepner at 11:14, 7 November 2018

2018-11-07T11:14:47Z

← Older revision		Revision as of 11:14, 7 November 2018
Line 102:		Line 102:

	== Onboard LEDs ==		== Onboard LEDs ==
	[[File:VisionCB-IND-1-4-LEDs.png\|center\|400px]]		[[File:VisionCB-IND-HDMI-1-4-LEDs.png\|center\|400px]]


Line 122:		Line 122:

	== 2x25 pin header ==		== 2x25 pin header ==
	[[File:VisionCB-IND-1-4-GPIO.png\|center\|400px]]		[[File:VisionCB-IND-HDMI-1-4-GPIO.png\|center\|400px]]

Wlodzimierzhepner: /* 2x25 pin header */

2018-08-01T13:23:14Z

2x25 pin header

← Older revision		Revision as of 13:23, 1 August 2018
Line 133:		Line 133:
	\| 1		\| 1
	\| CSI-HSYNC		\| CSI-HSYNC
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 2		\| 2
	\| CSI-VSYNC		\| CSI-VSYNC
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 3		\| 3
	\| CSI-DATA0		\| CSI-DATA0
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 4		\| 4
	\| CSI-DATA2		\| CSI-DATA2
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 5		\| 5
	\| CSI-DATA1		\| CSI-DATA1
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 6		\| 6
	\| CSI-DATA3		\| CSI-DATA3
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 7		\| 7
	\| CSI-DATA4		\| CSI-DATA4
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 8		\| 8
	\| CSI-DATA5		\| CSI-DATA5
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 9		\| 9
	\| CSI-MCLK		\| CSI-MCLK
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 10		\| 10
	\| CSI-DATA7		\| CSI-DATA7
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 11		\| 11
	\| CSI_PIXCLK		\| CSI_PIXCLK
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 12		\| 12
	\| CSI-DATA6		\| CSI-DATA6
	\| ~~Universal~~ GPIO with 3.3V logic levels.		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 13		\| 13
Line 241:		Line 241:
	\| 28		\| 28
	\| JTAG-nTRST		\| JTAG-nTRST
	\| -		\| JTAG TRST input line (active L).
	\|-		\|-
	\| 29		\| 29
	\| UART3-RXD		\| UART3-RXD
	\| -		\| Default: UART3 RxD input or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 30		\| 30
Line 257:		Line 257:
	\| 32		\| 32
	\| SNVS-TAMPER2		\| SNVS-TAMPER2
	\|		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 33		\| 33
Line 265:		Line 265:
	\| 34		\| 34
	\| SNVS-TAMPER3		\| SNVS-TAMPER3
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 35		\| 35
Line 273:		Line 273:
	\| 36		\| 36
	\| SNVS-TAMPER4		\| SNVS-TAMPER4
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 37		\| 37
Line 281:		Line 281:
	\| 38		\| 38
	\| SNVS-TAMPER5		\| SNVS-TAMPER5
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 39		\| 39
	\| SNVS-TAMPER0		\| SNVS-TAMPER0
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 40		\| 40
	\| I2C-SCL		\| I2C-SCL
	\| -		\| Universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 41		\| 41
	\| SNVS-TAMPER1		\| SNVS-TAMPER1
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 42		\| 42
	\| I2C-SDA		\| I2C-SDA
	\| -		\| Universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 43		\| 43

Wlodzimierzhepner: /* HDMI connector */

2018-07-31T12:41:18Z

HDMI connector

Show changes

Wlodzimierzhepner: /* Dimensions */

2018-07-31T12:38:34Z

Dimensions

← Older revision		Revision as of 12:38, 31 July 2018
Line 544:		Line 544:

	== Dimensions ==		== Dimensions ==
	[[File:VisionCB-IND-1-4-PCB-size.png\|center\|600px]]		[[File:VisionCB-IND-HDMI-1-4-PCB-size.png\|center\|600px]]

Wlodzimierzhepner: /* TFT LCD connector (RGB 24b, J405) */

2018-07-31T12:29:35Z

TFT LCD connector (RGB 24b, J405)

← Older revision		Revision as of 12:29, 31 July 2018
Line 332:		Line 332:
	\|}		\|}

	== ~~TFT LCD~~ connector ~~(RGB 24b, J405)~~ ==		== HDMI connector ==
	[[File:VisionCB-IND-1-4-lcd.png\|center\|400px]]		[[File:VisionCB-IND-HDMI-1-4-lcd.png\|center\|400px]]

Wlodzimierzhepner at 10:55, 31 July 2018

2018-07-31T10:55:35Z

← Older revision		Revision as of 10:55, 31 July 2018
Line 36:		Line 36:
	** 2x USB Host Type A connectors		** 2x USB Host Type A connectors
	** 1x USB OTG Micro AB connector		** 1x USB OTG Micro AB connector
	* Display Interface: HDMI Connector (~~800~~ x ~~480~~ Max. Resolution)		* Display Interface: HDMI Connector (1366 x 768 Max. Resolution)
	*Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)		*Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)
	* Power Supply		* Power Supply

Wlodzimierzhepner: /* Pictures of VisionCB-IND board */

2018-07-31T10:53:22Z

Pictures of VisionCB-IND board

← Older revision		Revision as of 10:53, 31 July 2018
Line 43:		Line 43:
	* Board Size: 98mm x 79mm x 22mm		* Board Size: 98mm x 79mm x 22mm

	== Pictures of VisionCB-IND board ==		== Pictures of VisionCB-IND-HDMI board ==
	{\| class="wikitable"		{\| class="wikitable"
	\|-		\|-
Line 49:		Line 49:
	\|-		\|-
	\| VisionCB-IND-HDMI board only \|\|		\| VisionCB-IND-HDMI board only \|\|
	[[File:VisionCB-IND-1-4-1k.png\|center\|thumb]]		[[File:VisionCB-IND-HDMI-1-4-1k.png\|center\|thumb]]
	\|-		\|-
	\| VisionCB-IND-HDMI board with VisionSOM-6ULL \|\|		\| VisionCB-IND-HDMI board with VisionSOM-6ULL \|\|
	[[File:VisionCB-IND-1-4-z-SOM-1k.png\|center\|thumb]]		[[File:VisionCB-IND-HDMI-1-4-z-SOM-1k.png\|center\|thumb]]
	\|}		\|}

Wlodzimierzhepner: Created page with "{{PageHeader|VisionCB-IND-HDMI Datasheet and Pinout}} toc jzpdf == General description == 400px VisionCB-IND-HDMI is a car..."

2018-07-31T10:52:48Z

Created page with "{{PageHeader|VisionCB-IND-HDMI Datasheet and Pinout}} __toc__ __jzpdf__ == General description == center|400px VisionCB-IND-HDMI is a car..."

New page

{{PageHeader|VisionCB-IND-HDMI Datasheet and Pinout}} __toc__
__jzpdf__
== General description ==
[[File:VisionCB-IND-HDMI-1-4-1k.png|center|400px]]
VisionCB-IND-HDMI is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as HDMI video output, USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector.

=== Applications ===
* Industrial embedded Linux computer
* Home Appliances
* Home Automation – Smart Home
* Human-machine Interfaces (HMI)
* Point-of-sales (POS) terminals
* Cash Register
* 2D barcode scanners and printers
* Smart grid Infrastructure
* IoT gateways
* Residential getaways
* Machine vision equipment
* Robotics
* Fitness/outdoor equipment

== Features ==
* Industrial grade Carrier Board (Base Board) compatible with the VisionSOM family of modules based on NXP i.MX 6UL / 6ULL application processors
* Core clock up to 696MHz (VisionSOM-6UL) or up to 900MHz (VisionSOM-6ULL)
* Up to 512MB SDRAM DDR3L (depends on used VisionSOM module)
* Up to 512MB NAND Flash / 32GB eMMC / uSD memory card (depends on used VisionSOM module)
* Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.1+EDR module
* SoM Interface: SODIMM200
* Expansion Connectors:
**2x25 Pin Headers (Female)
**microSD Card socket
* Communication Connectors:
** 1x Ethernet 10/100Mbit/s, RJ45
** 2x USB Host Type A connectors
** 1x USB OTG Micro AB connector
* Display Interface: HDMI Connector (800 x 480 Max. Resolution)
*Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)
* Power Supply
** Terminal block connector: Input Voltage 9-12V DC
* Temperature Range: 0 to +70°C
* Board Size: 98mm x 79mm x 22mm

== Pictures of VisionCB-IND board ==
{| class="wikitable"
|-
! Version !! Photo
|-
| VisionCB-IND-HDMI board only ||
[[File:VisionCB-IND-1-4-1k.png|center|thumb]]
|-
| VisionCB-IND-HDMI board with VisionSOM-6ULL ||
[[File:VisionCB-IND-1-4-z-SOM-1k.png|center|thumb]]
|}

== Ordering info ==
__orderingInfoStart__
[
{
"type" : "separator",
"value" : "VisionCB-IND-HDMI"
}
]
__orderingInfoEnd__

== Block Diagram ==
[[File:CB-IND-HDMI-blokowy-1-4.png|center|900px]]

== Electrical parameters ==
{| class="wikitable"
! rowspan="2" style="text-align: center; font-weight: bold;" | Parameter
! colspan="3" style="text-align: center; font-weight: bold;" | Value
! rowspan="2" style="text-align: center; font-weight: bold;" | Units
! rowspan="2" style="text-align: center; font-weight: bold;" | Comment
|-
| Min.
| Typ.
| Max.
|-
| Power Supply (Con100 input)
| 9.0
| 11.0
| 12.0
| V
| Polarized terminal block connector
|-
| Supply current
| -
| -
| 0.15
| A
| Excluding LCD, USB and antoher external loads
|-
| Output GPIO voltage (Con1)
| 0
| -
| 3.3
| V
| GPIO connector (current limited; max <250mA [RMS])
|}

== Onboard LEDs ==
[[File:VisionCB-IND-1-4-LEDs.png|center|400px]]

{| class="wikitable"
! style="text-align: center; font-weight: bold;" | LED
! style="text-align: center; font-weight: bold;" | Color
! style="text-align: center; font-weight: bold;" | Description
|-
| LED100 (PWR)
| Green
| Power indicator
|-
| LED200 (USB OVR)
| Red
| USB Overcurrent indicator
|-
|}

== 2x25 pin header ==
[[File:VisionCB-IND-1-4-GPIO.png|center|400px]]

{| class="wikitable"
! style="text-align: center; font-weight: bold;" | J504 Pin
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | Description
|-
| 1
| CSI-HSYNC
| -
|-
| 2
| CSI-VSYNC
| -
|-
| 3
| CSI-DATA0
| -
|-
| 4
| CSI-DATA2
| -
|-
| 5
| CSI-DATA1
| -
|-
| 6
| CSI-DATA3
| -
|-
| 7
| CSI-DATA4
| -
|-
| 8
| CSI-DATA5
| -
|-
| 9
| CSI-MCLK
| -
|-
| 10
| CSI-DATA7
| -
|-
| 11
| CSI_PIXCLK
| -
|-
| 12
| CSI-DATA6
| Universal GPIO with 3.3V logic levels.
|-
| 13
| ENET2_TXD0
| Default: ENET2 TXD0 line or universal GPIO with 3.3V logic levels.
|-
| 14
| UART3-RTS
| Default: UART3 RTS line or universal GPIO with 3.3V logic levels.
|-
| 15
| ENET2_TXEN
| Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels.
|-
| 16
| UART2-RTS
| Default: UART2 RTS line or universal GPIO with 3.3V logic levels.
|-
| 17
| ENET2_CRS_DV
| Default: ENET2 CRS_DV line or universal GPIO with 3.3V logic levels.
|-
| 18
| UART3-CTS
| Default: UART3 CTS line or universal GPIO with 3.3V logic levels.
|-
| 19
| ENET2_RXD1
| Default: ENET2 RXD1 line or universal GPIO with 3.3V logic levels.
|-
| 20
| UART1-RTS
| Default: UART1 RTS line or universal GPIO with 3.3V logic levels.
|-
| 21
| ENET2_RXER
| Default: ENET2 RXER line or universal GPIO with 3.3V logic levels.
|-
| 22
| UART2-CTS
| Default: UART2 CTS line or universal GPIO with 3.3V logic levels.
|-
| 23
| ENET2_TX_CLK
| Default: ENET2 TX_CLK line or universal GPIO with 3.3V logic levels.
|-
| 24
| UART1-CTS
| Default: UART1 CTS line or universal GPIO with 3.3V logic levels.
|-
| 25
| UART4-RXD
| Default: UART4 RXD input or universal GPIO with 3.3V logic levels.
|-
| 26
| JTAG-TCK
| Default: JTAG TCK input or universal GPIO with 3.3V logic levels.
|-
| 27
| UART4-TXD
| Default: UART4 TXD output or universal GPIO with 3.3V logic levels.
|-
| 28
| JTAG-nTRST
| -
|-
| 29
| UART3-RXD
| -
|-
| 30
| JTAG-TMS
| Default: JTAG TMS output or universal GPIO with 3.3V logic levels.
|-
| 31
| UART2-RXD
| Default: UART2 RXD input or universal GPIO with 3.3V logic levels.
|-
| 32
| SNVS-TAMPER2
|
|-
| 33
| UART2-TXD
| Default: UART2 TXD input or universal GPIO with 3.3V logic levels.
|-
| 34
| SNVS-TAMPER3
| -
|-
| 35
| UART1-RXD
| Default: UART1 RXD input or universal GPIO with 3.3V logic levels.
|-
| 36
| SNVS-TAMPER4
| -
|-
| 37
| UART1-TXD
| Default: UART1 TXD input or universal GPIO with 3.3V logic levels.
|-
| 38
| SNVS-TAMPER5
| -
|-
| 39
| SNVS-TAMPER0
| -
|-
| 40
| I2C-SCL
| -
|-
| 41
| SNVS-TAMPER1
| -
|-
| 42
| I2C-SDA
| -
|-
| 43
| GPIO5
| Default: General purpose pin GPIO5
|-
| 44
| JTAG-TDI
| Default: JTAG TDI input or universal GPIO with 3.3V logic levels.
|-
| 45
| GPIO8
| Default: General purpose pin GPIO8
|-
| 46
| GPIO9
| Default: General purpose pin GPIO9
|-
| 47
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
|-
| 48
| GND
| Ground
|-
| 49
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
|-
| 50
| GND
| Ground
|}

== TFT LCD connector (RGB 24b, J405) ==
[[File:VisionCB-IND-1-4-lcd.png|center|400px]]

{| class="wikitable"
! style="text-align: center; font-weight: bold;" | J400 pin
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | LCD interface name
|-
| 1
| LCD-DATA0
| LCD-B0
|-
| 2
| LCD-DATA1
| LCD-B1
|-
| 3
| LCD-DATA2
| LCD-B2
|-
| 4
| LCD-DATA3
| LCD-B3
|-
| 5
| LCD-DATA4
| LCD-B4
|-
| 6
| LCD-DATA5
| LCD-B5
|-
| 7
| LCD-DATA6
| LCD-B6
|-
| 8
| LCD-DATA7
| LCD-B7
|-
| 9
| GND
| GND
|-
| 10
| LCD-DATA8
| LCD-G0
|-
| 11
| LCD-DATA9
| LCD-G1
|-
| 12
| LCD-DATA10
| LCD-G2
|-
| 13
| LCD-DATA11
| LCD-G3
|-
| 14
| LCD-DATA12
| LCD-G4
|-
| 15
| LCD-DATA13
| LCD-G5
|-
| 16
| LCD-DATA14
| LCD-G6
|-
| 17
| LCD-DATA15
| LCD-G7
|-
| 18
| GND
| GND
|-
| 19
| LCD-DATA16
| LCD-R0
|-
| 20
| LCD-DATA17
| LCD-R1
|-
| 21
| LCD-DATA18
| LCD-R2
|-
| 22
| LCD-DATA19
| LCD-R3
|-
| 23
| LCD-DATA20
| LCD-R4
|-
| 24
| LCD-DATA21
| LCD-R5
|-
| 25
| LCD-DATA22
| LCD-R6
|-
| 26
| LCD-DATA23
| LCD-R7
|-
| 27
| GND
| GND
|-
| 28
| LCD-DE
| DE
|-
| 29
| LCD-HSYNC
| HSYNC
|-
| 30
| LCD-VSYNC
| VSYNC
|-
| 31
| GND
| GND
|-
| 32
| LCD-PCLK
| DCLK
|-
| 33
| GND
| GND
|-
| 34
| GPIO4
| TS-YPUL
|-
| 35
| GPIO3
| TS-YNUR
|-
| 36
| GPIO2
| TS-YPLL
|-
| 37
| GPIO1
| TS-YNLR
|-
| 38
| -
| -
|-
| 39
| -
| -
|-
| 40
| -
| -
|-
| 41
| -
| -
|-
| 42
| UART5-TXD
| I2C-SCL
|-
| 43
| UART5-RXD
| I2C-SDA
|-
| 44
| GND
| GND
|-
| 45
| VCC-LCD
| +3.3V (controlled by ENET2_TXEN)
|-
| 46
| VCC-LCD
| +3.3V (controlled by ENET2_TXEN)
|-
| 47
| VCC-5V0
| +5.0V
|-
| 48
| VCC-5V0
| +5.0V
|-
| 49
| LCD-RESET
| RESET
|-
| 50
| JTAG-nTRST
| PWREN
|}

== Dimensions ==
[[File:VisionCB-IND-1-4-PCB-size.png|center|600px]]