VisionCB-IND Datasheet and Pinout - Revision history

Wlodzimierzhepner: /* 2x25 pin header */

2018-08-01T13:22:28Z

2x25 pin header

← Older revision		Revision as of 13:22, 1 August 2018
Line 297:		Line 297:
	\| 42		\| 42
	\| I2C-SDA		\| I2C-SDA
	\| -		\| Universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 43		\| 43

Wlodzimierzhepner: /* 2x25 pin header */

2018-08-01T13:21:49Z

2x25 pin header

← Older revision		Revision as of 13:21, 1 August 2018
Line 293:		Line 293:
	\| 41		\| 41
	\| SNVS-TAMPER1		\| SNVS-TAMPER1
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 42		\| 42
	\| ~~Tamper input (SNVS power domain) or GPIO 3.3V.~~		\| I2C-SDA
	\| -		\| -
	\|-		\|-

Wlodzimierzhepner: /* 2x25 pin header */

2018-08-01T13:20:32Z

2x25 pin header

← Older revision		Revision as of 13:20, 1 August 2018
Line 265:		Line 265:
	\| 34		\| 34
	\| SNVS-TAMPER3		\| SNVS-TAMPER3
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 35		\| 35
Line 273:		Line 273:
	\| 36		\| 36
	\| SNVS-TAMPER4		\| SNVS-TAMPER4
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 37		\| 37
Line 281:		Line 281:
	\| 38		\| 38
	\| SNVS-TAMPER5		\| SNVS-TAMPER5
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 39		\| 39
	\| SNVS-TAMPER0		\| SNVS-TAMPER0
	\| -		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 40		\| 40
	\| I2C-SCL		\| I2C-SCL
	\| -		\| Universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 41		\| 41
Line 296:		Line 296:
	\|-		\|-
	\| 42		\| 42
	\| ~~I2C-SDA~~		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\| -		\| -
	\|-		\|-

Wlodzimierzhepner: /* 2x25 pin header */

2018-08-01T13:18:14Z

2x25 pin header

← Older revision		Revision as of 13:18, 1 August 2018
Line 133:		Line 133:
	\| 1		\| 1
	\| CSI-HSYNC		\| CSI-HSYNC
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 2		\| 2
	\| CSI-VSYNC		\| CSI-VSYNC
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 3		\| 3
	\| CSI-DATA0		\| CSI-DATA0
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 4		\| 4
	\| CSI-DATA2		\| CSI-DATA2
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 5		\| 5
	\| CSI-DATA1		\| CSI-DATA1
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 6		\| 6
	\| CSI-DATA3		\| CSI-DATA3
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 7		\| 7
	\| CSI-DATA4		\| CSI-DATA4
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 8		\| 8
	\| CSI-DATA5		\| CSI-DATA5
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 9		\| 9
	\| CSI-MCLK		\| CSI-MCLK
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 10		\| 10
	\| CSI-DATA7		\| CSI-DATA7
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 11		\| 11
	\| CSI_PIXCLK		\| CSI_PIXCLK
	\| -		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 12		\| 12
	\| CSI-DATA6		\| CSI-DATA6
	\| ~~Universal~~ GPIO with 3.3V logic levels.		\| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 13		\| 13
Line 241:		Line 241:
	\| 28		\| 28
	\| JTAG-nTRST		\| JTAG-nTRST
	\| -		\| JTAG TRST input line (active L).
	\|-		\|-
	\| 29		\| 29
	\| UART3-RXD		\| UART3-RXD
	\| -		\| Default: UART3 RxD input or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 30		\| 30
Line 257:		Line 257:
	\| 32		\| 32
	\| SNVS-TAMPER2		\| SNVS-TAMPER2
	\|		\| Tamper input (SNVS power domain) or GPIO 3.3V.
	\|-		\|-
	\| 33		\| 33

Wlodzimierzhepner: /* 2x25 pin header */

2018-07-31T10:46:32Z

2x25 pin header

← Older revision		Revision as of 10:46, 31 July 2018
Line 321:		Line 321:
	\| 48		\| 48
	\| GND		\| GND
	\| -		\| Ground
	\|-		\|-
	\| 49		\| 49
Line 329:		Line 329:
	\| 50		\| 50
	\| GND		\| GND
	\| -		\| Ground
	\|}		\|}

Wlodzimierzhepner: /* Electrical parameters */

2018-07-24T09:47:40Z

Electrical parameters

← Older revision		Revision as of 09:47, 24 July 2018
Line 93:		Line 93:
	\| Excluding LCD, USB and antoher external loads		\| Excluding LCD, USB and antoher external loads
	\|-		\|-
	\| ~~Input~~ GPIO voltage (Con1)		\| Output GPIO voltage (Con1)
	\| 0		\| 0
	\| -		\| -
	\| 3.3		\| 3.3
	\| V		\| V
	\| GPIO connector		\| GPIO connector (current limited; max <250mA [RMS])
	\|}		\|}

Wlodzimierzhepner: /* 2x25 pin header */

2018-07-24T09:38:33Z

2x25 pin header

← Older revision		Revision as of 09:38, 24 July 2018
Line 189:		Line 189:
	\| 15		\| 15
	\| ENET2_TXEN		\| ENET2_TXEN
	\| Default: ENET2 TXEN ~~line or universal GPIO with 3.3V logic levels. UART1-RTS Default: UART1 RTS~~ line or universal GPIO with 3.3V logic levels.		\| Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels.
	\|-		\|-
	\| 16		\| 16

Wlodzimierzhepner: /* 2x25 pin header */

2018-07-23T13:53:35Z

2x25 pin header

← Older revision		Revision as of 13:53, 23 July 2018
Line 317:		Line 317:
	\| 47		\| 47
	\| VCC-3V3		\| VCC-3V3
	\| +3.3V generated by internal SOM LDO converter (limited load current).		\| +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
	\|-		\|-
	\| 48		\| 48
Line 325:		Line 325:
	\| 49		\| 49
	\| VCC-3V3		\| VCC-3V3
	\| +3.3V generated by internal SOM LDO converter (limited load current).		\| +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
	\|-		\|-
	\| 50		\| 50

Wlodzimierzhepner: /* Electrical parameters */

2018-07-23T13:20:36Z

Electrical parameters

← Older revision		Revision as of 13:20, 23 July 2018
Line 81:		Line 81:
	\| Power Supply (Con100 input)		\| Power Supply (Con100 input)
	\| 9.0		\| 9.0
	\| 12.0		\| 11.0
	\| 12.0		\| 12.0
	\| V		\| V
Line 100:		Line 100:
	\| GPIO connector		\| GPIO connector
	\|}		\|}

	== Onboard LEDs ==		== Onboard LEDs ==
	[[File:VisionCB-IND-1-4-LEDs.png\|center\|400px]]		[[File:VisionCB-IND-1-4-LEDs.png\|center\|400px]]

Wlodzimierzhepner: /* Onboard LEDs */

2018-07-23T13:16:39Z

Onboard LEDs

← Older revision		Revision as of 13:16, 23 July 2018
Line 110:		Line 110:
	! style="text-align: center; font-weight: bold;" \| Description		! style="text-align: center; font-weight: bold;" \| Description
	\|-		\|-
	\| LED100		\| LED100 (PWR)
	\| Green		\| Green
	\| Power indicator		\| Power indicator
	\|-		\|-
	\| LED200		\| LED200 (USB OVR)
	\| Red		\| Red
	\| USB Overcurrent indicator		\| USB Overcurrent indicator