VisionCB-RT-STD - Revision history

Piotrzbysinski at 08:55, 7 April 2020

2020-04-07T08:55:14Z

← Older revision		Revision as of 08:55, 7 April 2020
Line 1:		Line 1:
	{{Product\|category1=SOM\|category2=\|image=VisionCB-RT-STD-1-0-1k.png		{{Product\|category1=SOM\|category2=\|image=VisionCB-RT-STD-1-0-1k.png
	\|~~cpu~~=VisionSOM-RT ~~- System on Module~~ with NXP i.MX RT ~~application procesor~~		\|cb_som_compatibility=VisionSOM-RT module with NXP i.MX-RT microcontroller
	~~\|ram=on-chip 512kB RAM<br>(depends on used VisionSOM)<br>or 32MB SDRAM~~		\|cb_som_socket=SODIMM200
	\|~~storage~~=~~4 or 16MB QSPI Flash<br>(depends on used VisionSOM)~~		\|cb_display_connector=24-bit RGB parallel interface (FPC50)
	\|~~camera=up to 24-bit CSI interface~~		\|cb_network=1x Ethernet 10/100Mbit/s, RJ45
	~~\|display~~=24-bit RGB parallel interface		\|cb_usb=USB 2.0 host x1, USB-OTG 2.0 x1
	\|~~net~~=1x Ethernet 10/100Mbit/s, RJ45		\|cb_debugger=JTAG connector for external debugger
	\|~~temp~~= 0 to +~~70°C~~		\|cb_console_interface=USB/UART
	\|~~usb~~= ~~USB2.0 Host~~		\|cb_switches=4+1 (reset)
			\|cb_leds=4 + 1 (power)
			\|cb_connectors=Raspberry Pi compatible (40 pins, 2,54mm), Arduino Rev3
			\|cb_rtc_backup=none
			\|cb_power_supply=External 9-12V DC
	\|dim=145mm x 90mm x 17mm		\|dim=145mm x 90mm x 17mm
	\|description=VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>		\|description=VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>

Wlodzimierzhepner at 09:31, 5 February 2019

2019-02-05T09:31:43Z

← Older revision		Revision as of 09:31, 5 February 2019
Line 8:		Line 8:
	\|temp= 0 to +70°C		\|temp= 0 to +70°C
	\|usb= USB2.0 Host		\|usb= USB2.0 Host
	\|dim=145mm x ~~91mm~~ x 17mm		\|dim=145mm x 90mm x 17mm
	\|description=VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>		\|description=VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>

Pawelzbysinski: Created page with "{{Product|category1=SOM|category2=|image=VisionCB-RT-STD-1-0-1k.png |cpu=VisionSOM-RT - System on Module with NXP i.MX RT application procesor |ram=on-chip 512kB RAM
(depen..."

2019-02-04T19:00:20Z

Created page with "{{Product|category1=SOM|category2=|image=VisionCB-RT-STD-1-0-1k.png |cpu=VisionSOM-RT - System on Module with NXP i.MX RT application procesor |ram=on-chip 512kB RAM (depen..."

New page

{{Product|category1=SOM|category2=|image=VisionCB-RT-STD-1-0-1k.png
|cpu=VisionSOM-RT - System on Module with NXP i.MX RT application procesor
|ram=on-chip 512kB RAM (depends on used VisionSOM) or 32MB SDRAM
|storage=4 or 16MB QSPI Flash (depends on used VisionSOM)
|camera=up to 24-bit CSI interface
|display=24-bit RGB parallel interface
|net=1x Ethernet 10/100Mbit/s, RJ45
|temp= 0 to +70°C
|usb= USB2.0 Host
|dim=145mm x 91mm x 17mm
|description=VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. 

|documentation=
{{DocBox|boxwidth=21|system=Documentation
|
content= 
*[[VisionCB-RT-STD v.1.0 Datasheet and Pinout|VisionCB-RT-STD v.1.0 Datasheet and Pinout]]
__WP_Files(2287)
}}
}}

VisionCB-RT-STD - Revision history

Piotrzbysinski at 08:55, 7 April 2020

Wlodzimierzhepner at 09:31, 5 February 2019

Pawelzbysinski: Created page with "{{Product|category1=SOM|category2=|image=VisionCB-RT-STD-1-0-1k.png |cpu=VisionSOM-RT - System on Module with NXP i.MX RT application procesor |ram=on-chip 512kB RAM(depen..."

Pawelzbysinski: Created page with "{{Product|category1=SOM|category2=|image=VisionCB-RT-STD-1-0-1k.png |cpu=VisionSOM-RT - System on Module with NXP i.MX RT application procesor |ram=on-chip 512kB RAM
(depen..."