VisionCB-RT1176-STD v.1.2 Datasheet and Pinout - Revision history

Piotrzbysinski: /* MIPI-DSI LCD connector (J501) */

2025-01-17T21:10:43Z

MIPI-DSI LCD connector (J501)

← Older revision		Revision as of 21:10, 17 January 2025
Line 1,084:		Line 1,084:
	\|}		\|}
	Notes:<br>		Notes:<br>
	1. Both lines ~~pull~~-~~upped~~ to 3.3V with 4,7kOhm resistors.<br>		1. Both lines pulled-up to 3.3V with 4,7kOhm resistors.<br>
	2. In series - between GPIO lines and connector pins - 100 Ohm resistors are included.<br>		2. In series - between GPIO lines and connector pins - 100 Ohm resistors are included.<br>
	3. The I2C6 interface is shared with CSI input.<br>		3. The I2C6 interface is shared with CSI input.<br>

2025-01-17T21:10:07Z

MIPI-CSI camera connector (J500)

← Older revision		Revision as of 21:10, 17 January 2025
Line 1,219:		Line 1,219:
	\|}		\|}
	Notes:<br>		Notes:<br>
	1. Both lines ~~pull~~-~~upped~~ to 3.3V with 4,7kOhm resistors.<br>		1. Both lines pulled-up to 3.3V with 4,7kOhm resistors.<br>
	2. The I2C6 interface is shared with DSI output.<br>		2. The I2C6 interface is shared with DSI output.<br>

2024-07-09T12:03:09Z

Applications

← Older revision		Revision as of 12:03, 9 July 2024
Line 10:		Line 10:

	=== Applications ===		=== Applications ===
	* ~~Digital cluster~~		* Industrial embedded RTOS computer
	* Home ~~Control Panel~~		* Home Appliances
			* Air Conditioning
			* Building Security
			* Fleet Management
			* Heat Metering
	* Home Automation – Smart Home		* Home Automation – Smart Home
	* Human-machine Interfaces (HMI)		* Human-machine Interfaces (HMI)
	* Point-of-sales (POS) terminals
	* Motor Drives		* Motor Drives
	* ~~2D barcode scanners and printers~~		* Cash Register
	* Smart grid ~~infrastructure~~		* Intermediate Flight Controller
			* Smart grid Infrastructure
	* IoT gateways		* IoT gateways
	* ~~Transport ticketing~~		* Residential getaways
	* ~~PV Energy Generation~~		* Smart Lock
	* ~~Robotic appliance~~		* Robotics
	* ~~Fitness/outdoor equipment~~		* Toys and Board Games

	== Features ==		== Features ==

2024-07-09T12:00:19Z

CAN connector

← Older revision		Revision as of 12:00, 9 July 2024
Line 834:		Line 834:
	\|}		\|}

	== CAN ~~connector~~ ==		== CAN interface ==
	[[File:VisionCB-RT1176-STD-CAN.png\|center\|600px]]		[[File:VisionCB-RT1176-STD-CAN.png\|center\|600px]]

2024-07-09T11:59:37Z

RS485 connector

← Older revision		Revision as of 11:59, 9 July 2024
Line 793:		Line 793:


	== RS485 ~~connector~~ ==		== RS485 interface ==
	[[File:VisionCB-RT1176-STD-RS485.png\|center\|600px]]		[[File:VisionCB-RT1176-STD-RS485.png\|center\|600px]]

2024-07-09T11:59:04Z

USB host

← Older revision		Revision as of 11:59, 9 July 2024
Line 645:		Line 645:
	1. USB Host is connected to USB2 interface of MCU.<br>		1. USB Host is connected to USB2 interface of MCU.<br>
	2. D+/D-/VBUS signals are connected to dedicated analog MCU pins.<br>		2. D+/D-/VBUS signals are connected to dedicated analog MCU pins.<br>
			3. USB2.OC controls OverCurrent red LED (D300).

	== User LEDs connections ==		== User LEDs connections ==

2024-07-09T11:58:40Z

USB-OTG

← Older revision		Revision as of 11:58, 9 July 2024
Line 609:		Line 609:
	! style="text-align: center; font-weight: bold;" \| Description		! style="text-align: center; font-weight: bold;" \| Description
	\|-		\|-
	\| ~~USB2~~.EN		\| USB1.EN
	\| GPIO_AD_12		\| GPIO_AD_12
	\| Power enable signal connected to USB power switch (STMPS2252).		\| Power enable signal connected to USB power switch (STMPS2252).
	\|-		\|-
	\| ~~USB2~~.OC		\| USB1.OC
	\| ~~GPIO_AD_13~~		\| GPIO_AD_10
	\| Over-current signal input (from USB power switch STMPS2252).		\| Over-current signal input (from USB power switch STMPS2252).
			\|-
			\| USB1.ID
			\| GPIO_AD_09
			\| USB device identification input.
	\|}		\|}
	Notes:<br>		Notes:<br>
	1. USB-OTG is connected to USB1 interface of MCU.<br>		1. USB-OTG is connected to USB1 interface of MCU.<br>
	2. D+/D-/VBUS signals are connected to dedicated analog MCU pins.<br>		2. D+/D-/VBUS signals are connected to dedicated analog MCU pins.<br>
			3. USB1.OC controls OverCurrent red LED (D300).

	== USB host ==		== USB host ==

2024-07-09T11:56:10Z

USB host

@@ Line 600: / Line 600: @@
 | Codec configuration SDA line of I2C5 interface<br>4,7kOhm pull-up resistor
 |}
 == USB host ==

2024-07-09T11:55:24Z

USB-OTG

@@ Line 620: / Line 620: @@
 . USB Host is connected to USB2 interface of MCU.<br>
 . D+/D-/VBUS signals are connected to dedicated analog MCU pins.<br>
 == User LEDs connections ==

2024-07-09T11:54:53Z

USB host

← Older revision		Revision as of 11:54, 9 July 2024
Line 609:		Line 609:
	! style="text-align: center; font-weight: bold;" \| Description		! style="text-align: center; font-weight: bold;" \| Description
	\|-		\|-
	\| ~~SAI1~~.~~MCLK~~		\| USB2.EN
	\| ~~GPIO_DISP_B2_03~~		\| GPIO_AD_12
	\| ~~Audio interface MCLK~~ signal		\| Power enable signal connected to USB power switch (STMPS2252).
	\|-		\|-
	\| ~~SAI1~~.~~BCLK~~		\| USB2.OC
	\| ~~GPIO_DISP_B2_05~~		\| GPIO_AD_13
	~~\| Audio interface BCLK signal~~		\| Over-current signal input (from USB power switch STMPS2252).
	\|-
	~~\| SAI1.FSYNC~~
	~~\| GPIO_DISP_B2_04~~
	~~\| Audio interface FSYNC~~ signal
	\|-
	~~\| SAI1~~.TX
	~~\| GPIO_DISP_B2_07~~
	~~\| Audio interface TX signal~~
	\|-
	~~\| SAI1.RX~~
	~~\| GPIO_DISP_B2_06~~
	~~\| Audio interface TX signal~~
	\|-
	~~\| I2C5.SCL~~
	~~\| GPIO_LPSR_09~~
	~~\| Codec configuration SCL line of I2C5 interface<br>4,7kOhm pull-up resistor~~
	\|-
	~~\| I2C5.SDA~~
	~~\| GPIO_LPSR_08~~
	~~\| Codec configuration SDA line of I2C5 interface<br>4,7kOhm pull-up resistor~~
	\|}		\|}
			Notes:<br>
			1. USB Host is connected to USB2 interface of MCU.<br>
			2. D+/D-/VBUS signals are connected to dedicated analog MCU pins.<br>

	== USB-OTG ==		== USB-OTG ==