VisionCB-STM32MP1-STD - Revision history

Piotrzbysinski at 09:03, 3 July 2020

2020-07-03T09:03:13Z

← Older revision		Revision as of 09:03, 3 July 2020
Line 4:		Line 4:
	\|cb_display_connector=24-bit RGB parallel interface (FPC50)<br>1 lane MIPI-DSI interface (FPC30)		\|cb_display_connector=24-bit RGB parallel interface (FPC50)<br>1 lane MIPI-DSI interface (FPC30)
	\|cb_network=1x Ethernet 10/100Mbit/s, RJ45		\|cb_network=1x Ethernet 10/100Mbit/s, RJ45
	\|cb_usb=USB 2.0 host x1<br>USB-~~OTH~~ 2.0 x1		\|cb_usb=USB 2.0 host x1<br>USB-OTG 2.0 x1
	\|cb_debugger=Built-in ST-Link/v2-1 compatible (SWD)		\|cb_debugger=Built-in ST-Link/v2-1 compatible (SWD)
	\|cb_console_interface=USB/UART		\|cb_console_interface=USB/UART

Piotrzbysinski at 09:01, 3 July 2020

2020-07-03T09:01:53Z

← Older revision		Revision as of 09:01, 3 July 2020
Line 14:		Line 14:
	\|temp= 0 to +70°C		\|temp= 0 to +70°C
	\|dim=160mm x 100mm x 17mm		\|dim=160mm x 100mm x 17mm
	\|description=VisionCB-~~8Mmini~~-STD is a carrier board for the VisionSOM-~~8Mmini~~ family of computer-on-modules which are powered by ~~NXP~~ SOC ~~iMX8Mmini~~ (~~quad~~ core ARM Cortex-~~A53~~+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet~~, PCIe~~, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.		\|description=VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC STM32MP1 (dual core ARM Cortex-A7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
	The carrier board connects with the SoM via a standard SODIMM connector.		The carrier board connects with the SoM via a standard SODIMM connector.
	VisionCB-~~8Mmini~~-STD is equipped with ~~Segger J~~-Link debugger and Linux serial console port on USB vCOM.		VisionCB-STM32MP1-STD is equipped with ST-Link/v2-1 SWD debugger and Linux serial console port on USB vCOM.
	<br>		<br>

Piotrzbysinski at 08:59, 3 July 2020

2020-07-03T08:59:02Z

← Older revision		Revision as of 08:59, 3 July 2020
Line 14:		Line 14:
	\|temp= 0 to +70°C		\|temp= 0 to +70°C
	\|dim=160mm x 100mm x 17mm		\|dim=160mm x 100mm x 17mm
	\|description=VisionCB-~~STM32MP1~~-STD is a carrier board for the VisionSOM-~~STM32MP1~~ family of computer-on-modules which are powered by ~~STMicroelectronics~~ SOC (~~dual~~ core ARM Cortex-A7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.		\|description=VisionCB-8Mmini-STD is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
	VisionCB-~~STM32MP1~~-STD is equipped with ST-Link~~/v2-1 SWD~~ debugger.		The carrier board connects with the SoM via a standard SODIMM connector.
			VisionCB-8Mmini-STD is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM.
	<br>		<br>

Piotrzbysinski at 10:16, 1 July 2020

2020-07-01T10:16:43Z

← Older revision		Revision as of 10:16, 1 July 2020
Line 15:		Line 15:
	\|dim=160mm x 100mm x 17mm		\|dim=160mm x 100mm x 17mm
	\|description=VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC (dual core ARM Cortex-A7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.		\|description=VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC (dual core ARM Cortex-A7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
	VisionCB-STM32MP1-STD is equipped with ST-Link/v2-1 ~~JTAG~~ debugger.		VisionCB-STM32MP1-STD is equipped with ST-Link/v2-1 SWD debugger.
	<br>		<br>

Piotrzbysinski at 10:16, 1 July 2020

2020-07-01T10:16:21Z

← Older revision		Revision as of 10:16, 1 July 2020
Line 14:		Line 14:
	\|temp= 0 to +70°C		\|temp= 0 to +70°C
	\|dim=160mm x 100mm x 17mm		\|dim=160mm x 100mm x 17mm
	\|description=VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC (dual core ARM Cortex-A7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>		\|description=VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC (dual core ARM Cortex-A7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
			VisionCB-STM32MP1-STD is equipped with ST-Link/v2-1 JTAG debugger.
			<br>

	\|documentation=		\|documentation=

Piotrzbysinski at 10:14, 1 July 2020

2020-07-01T10:14:29Z

← Older revision		Revision as of 10:14, 1 July 2020
Line 14:		Line 14:
	\|temp= 0 to +70°C		\|temp= 0 to +70°C
	\|dim=160mm x 100mm x 17mm		\|dim=160mm x 100mm x 17mm
	\|description=VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC (dual core ARM Cortex-M7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>		\|description=VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC (dual core ARM Cortex-A7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>

	\|documentation=		\|documentation=

Pawelzbysinski at 11:51, 7 April 2020

2020-04-07T11:51:37Z

← Older revision		Revision as of 11:51, 7 April 2020
Line 21:		Line 21:
	content=		content=
	*[[VisionCB-STM32MP1-STD Datasheet and Pinout\|VisionCB-STM32MP1-STD v.1.1 Datasheet and Pinout]]		*[[VisionCB-STM32MP1-STD Datasheet and Pinout\|VisionCB-STM32MP1-STD v.1.1 Datasheet and Pinout]]
	__WP_Files(~~1425~~)		__WP_Files(2596)
	}}{{DocBox\|boxwidth=21\|system=Howto		}}{{DocBox\|boxwidth=21\|system=Howto
	\|		\|

Pawelzbysinski at 08:42, 7 April 2020

2020-04-07T08:42:53Z

← Older revision		Revision as of 08:42, 7 April 2020
Line 21:		Line 21:
	content=		content=
	*[[VisionCB-STM32MP1-STD Datasheet and Pinout\|VisionCB-STM32MP1-STD v.1.1 Datasheet and Pinout]]		*[[VisionCB-STM32MP1-STD Datasheet and Pinout\|VisionCB-STM32MP1-STD v.1.1 Datasheet and Pinout]]
	__WP_Files(~~14250~~)		__WP_Files(1425)
	}}{{DocBox\|boxwidth=21\|system=Howto		}}{{DocBox\|boxwidth=21\|system=Howto
	\|		\|

Pawelzbysinski at 08:42, 7 April 2020

2020-04-07T08:42:35Z

← Older revision		Revision as of 08:42, 7 April 2020
Line 20:		Line 20:
	\|		\|
	content=		content=
	*[[VisionCB-~~6ULL~~-STD Datasheet and Pinout\|VisionCB-~~6ULL~~-STD v.2.0 Datasheet and Pinout]]		*[[VisionCB-STM32MP1-STD Datasheet and Pinout\|VisionCB-STM32MP1-STD v.1.1 Datasheet and Pinout]]
	__WP_Files(~~1425~~)		__WP_Files(14250)
	}}{{DocBox\|boxwidth=21\|system=Howto		}}{{DocBox\|boxwidth=21\|system=Howto
	\|		\|
	content=		content=
	*[[VisionCB-STD Power Supply\|VisionCB-STD Power Supply]]		*[[VisionCB-STM32MP1-STD Power Supply\|VisionCB-STM32MP1-STD Power Supply]]
	*[[VisionSOM-6ULL - USB recovery mode\|VisionSOM-6ULL - USB recovery mode]]
	}}		}}
	}}		}}

Pawelzbysinski at 08:40, 7 April 2020

2020-04-07T08:40:00Z

← Older revision		Revision as of 08:40, 7 April 2020
Line 2:		Line 2:
	\|cb_som_compatibility=VisionSOM-STM32P1 module with STMicroelectronics STM32MP15x processor		\|cb_som_compatibility=VisionSOM-STM32P1 module with STMicroelectronics STM32MP15x processor
	\|cb_som_socket=SODIMM200		\|cb_som_socket=SODIMM200
	\|cb_display_connector=24-bit RGB parallel interface (FPC50)		\|cb_display_connector=24-bit RGB parallel interface (FPC50)<br>1 lane MIPI-DSI interface (FPC30)
	1 lane MIPI-DSI interface (FPC30)
	\|cb_network=1x Ethernet 10/100Mbit/s, RJ45		\|cb_network=1x Ethernet 10/100Mbit/s, RJ45
	\|cb_usb=USB 2.0 host x1		\|cb_usb=USB 2.0 host x1<br>USB-OTH 2.0 x1
	USB-OTH 2.0 x1
	\|cb_debugger=Built-in ST-Link/v2-1 compatible (SWD)		\|cb_debugger=Built-in ST-Link/v2-1 compatible (SWD)
	\|cb_console_interface=USB/UART		\|cb_console_interface=USB/UART
	\|cb_switches=2+1 (reset)		\|cb_switches=2+1 (reset)
	\|cb_leds=3+2 (3.3 and 5V power)		\|cb_leds=3+2 (3.3 and 5V power)
	\|cb_connectors=Raspberry Pi compatible (40 pins, 2,54mm)		\|cb_connectors=Raspberry Pi compatible (40 pins, 2,54mm)<br>Universal GPIO header (40 pins, 2,54mm)<br>MicroSD socket
	Universal GPIO header (40 pins, 2,54mm)
	MicroSD socket
	\|cb_rtc_backup=Battery CR1220 socket		\|cb_rtc_backup=Battery CR1220 socket
	\|cb_power_supply=External 9-12V DC		\|cb_power_supply=External 9-12V DC
	~~\|cpu=VisionSOM-6UL -~~
	\|temp= 0 to +70°C		\|temp= 0 to +70°C
	\|dim=160mm x 100mm x 17mm		\|dim=160mm x 100mm x 17mm