VisionSOM imx-android - Revision history

KrzysztofChojnowski at 09:33, 8 March 2022

2022-03-08T09:33:09Z

← Older revision		Revision as of 09:33, 8 March 2022
Line 143:		Line 143:
	* 32GB eMMC:		* 32GB eMMC:
	<pre>		<pre>
	sudo ./device/fsl/common/tools/uuu_imx_android_flash.sh -c 32 -D out/target/product/visioncb_8mm_std_dsi/ -f imx8mm -a -e		sudo ./device/fsl/common/tools/uuu_imx_android_flash.sh -c 28 -D out/target/product/visioncb_8mm_std_dsi/ -f imx8mm -a -e
	</pre>		</pre>

	For the eMMC memory programming we also need the UUU version 1.3.124 (https://github.com/NXPmicro/mfgtools/releases). It needs to be available in the system PATH.		For the eMMC memory programming we also need the UUU version 1.3.124 (https://github.com/NXPmicro/mfgtools/releases). It needs to be available in the system PATH.

KrzysztofChojnowski at 08:59, 16 July 2021

2021-07-16T08:59:26Z

← Older revision		Revision as of 08:59, 16 July 2021
Line 98:		Line 98:

	Having all sources ready, we can go on to system image compilation. The following device configurations are available:		Having all sources ready, we can go on to system image compilation. The following device configurations are available:
	* visioncb_8mm_adv_dsi-userdebug VisionCB-8M-ADV carrier board with SL-TFT7-TP-720-1280-MIPI display		* visioncb_8mm_adv_dsi-user VisionCB-8M-ADV carrier board with SL-TFT7-TP-720-1280-MIPI display
	* visioncb_8mm_adv_hdmi-userdebug VisionCB-8M-ADV carrier board with HDMI display connected		* visioncb_8mm_adv_dsi-userdebug VisionCB-8M-ADV carrier board with SL-TFT7-TP-720-1280-MIPI display with debug enabled
	* visioncb_8mm_std_dsi-userdebug VisionCB-8M-STD carrier board with SL-TFT7-TP-720-1280-MIPI display		* visioncb_8mm_adv_hdmi-user VisionCB-8M-ADV carrier board with HDMI display connected
	* visioncb_8mm_std_hdmi-userdebug VisionCB-8M-STD carrier board with SL-MIPI-LVDS-HDMI-CNV converter		* visioncb_8mm_adv_hdmi-userdebug VisionCB-8M-ADV carrier board with HDMI display connected with debug enabled
			* visioncb_8mm_std_dsi-user VisionCB-8M-STD carrier board with SL-TFT7-TP-720-1280-MIPI display
			* visioncb_8mm_std_dsi-userdebug VisionCB-8M-STD carrier board with SL-TFT7-TP-720-1280-MIPI display with debug enabled
			* visioncb_8mm_std_hdmi-user VisionCB-8M-STD carrier board with SL-MIPI-LVDS-HDMI-CNV converter
			* visioncb_8mm_std_hdmi-userdebug VisionCB-8M-STD carrier board with SL-MIPI-LVDS-HDMI-CNV converter with debug enabled

	Each configuration supports the VisionSOM-8MM modules with 2GB RAM memory and one of the following storage options:		Each configuration supports the VisionSOM-8MM modules with 2GB RAM memory and one of the following storage options:

KrzysztofChojnowski at 12:33, 7 May 2021

2021-05-07T12:33:55Z

← Older revision		Revision as of 12:33, 7 May 2021
Line 120:		Line 120:
	== Installing the compiled system ==		== Installing the compiled system ==

	The compiled system files are located in the output directory: $MY_ANDROID/out/target/product/. We can install them on the SD card or the eMMC memory using the scripts provided by NXP:		The compiled system files are located in the output directory: $MY_ANDROID/out/target/product/. We can install them on the SD card or the eMMC memory using the scripts provided by NXP. The path in the arguments list depends on the hardware configuration selected during the system build.

	* 16GB SD card:		* 16GB SD card:
	<pre>		<pre>
	sudo ./device/fsl/common/tools/fsl-sdcard-partition.sh -c 14 -D out/target/product/visioncb_8mm_std_dsi~~-userdebug~~/ -f imx8mm /dev/sdX		sudo ./device/fsl/common/tools/fsl-sdcard-partition.sh -c 14 -D out/target/product/visioncb_8mm_std_dsi/ -f imx8mm /dev/sdX
	</pre>		</pre>

	* 32GB SD card:		* 32GB SD card:
	<pre>		<pre>
	sudo ./device/fsl/common/tools/fsl-sdcard-partition.sh -c 28 -D out/target/product/visioncb_8mm_std_dsi~~-userdebug~~/ -f imx8mm /dev/sdX		sudo ./device/fsl/common/tools/fsl-sdcard-partition.sh -c 28 -D out/target/product/visioncb_8mm_std_dsi/ -f imx8mm /dev/sdX
	</pre>		</pre>

	* 16GB eMMC:		* 16GB eMMC:
	<pre>		<pre>
	sudo ./device/fsl/common/tools/uuu_imx_android_flash.sh -c 14 -D out/target/product/visioncb_8mm_std_dsi~~-userdebug~~/ -f imx8mm -a -e		sudo ./device/fsl/common/tools/uuu_imx_android_flash.sh -c 14 -D out/target/product/visioncb_8mm_std_dsi/ -f imx8mm -a -e
	</pre>		</pre>

	* 32GB eMMC:		* 32GB eMMC:
	<pre>		<pre>
	sudo ./device/fsl/common/tools/uuu_imx_android_flash.sh -c 32 -D out/target/product/visioncb_8mm_std_dsi~~-userdebug~~/ -f imx8mm -a -e		sudo ./device/fsl/common/tools/uuu_imx_android_flash.sh -c 32 -D out/target/product/visioncb_8mm_std_dsi/ -f imx8mm -a -e
	</pre>		</pre>

	For the eMMC memory programming we also need the UUU version 1.3.124 (https://github.com/NXPmicro/mfgtools/releases). It needs to be available in the system PATH.		For the eMMC memory programming we also need the UUU version 1.3.124 (https://github.com/NXPmicro/mfgtools/releases). It needs to be available in the system PATH.

KrzysztofChojnowski at 12:32, 7 May 2021

2021-05-07T12:32:11Z

← Older revision		Revision as of 12:32, 7 May 2021
Line 88:		Line 88:
	git clone https://github.com/SoMLabs/imx_android_visionsom_8mm_demo_app.git somlabsdemo		git clone https://github.com/SoMLabs/imx_android_visionsom_8mm_demo_app.git somlabsdemo

	cd $MY_ANDROID/device/fsl~~/imx8m~~		cd $MY_ANDROID/device/fsl
	git clone https://github.com/SoMLabs/imx_android_visionsom_8mm.git -b android-10.0.0_2.5.0 visionsom_8mm		git clone https://github.com/SoMLabs/imx_android_visionsom_8mm.git -b android-10.0.0_2.5.0 visionsom_8mm

	~~cd $MY_ANDROID/device/fsl~~
	~~git apply $MY_ANDROID/device/fsl/imx8m/visionsom_8mm/patch/device_fsl.patch~~

	cd $MY_ANDROID/hardware/broadcom/libbt		cd $MY_ANDROID/hardware/broadcom/libbt
	git apply $MY_ANDROID/device/fsl~~/imx8m~~/visionsom_8mm/patch/broadcom_libbt.patch		git apply $MY_ANDROID/device/fsl/visionsom_8mm/patch/broadcom_libbt.patch
	</pre>		</pre>

	~~By default~~ the system is built for the VisionCB-8M-STD board with the 7" Powertip display. This configuration may be changed by replacing the chosen device tree file in $MY_ANDROID/device/fsl/imx8m/visionsom_8mm/BoardConfig.mk		== Building the system image ==

	~~<pre>~~		Having all sources ready, we can go on to system image compilation. The following device configurations are available:
	...		* visioncb_8mm_adv_dsi-userdebug VisionCB-8M-ADV carrier board with SL-TFT7-TP-720-1280-MIPI display
	~~TARGET_BOARD_DTS_CONFIG := imx8mm:visionsom~~-~~8mm~~-cb-~~std~~-~~mipi7.dtb~~		* visioncb_8mm_adv_hdmi-userdebug VisionCB-8M-ADV carrier board with HDMI display connected
	~~...~~		* visioncb_8mm_std_dsi-userdebug VisionCB-8M-STD carrier board with SL-TFT7-TP-720-1280-MIPI display
	~~</pre>~~		* visioncb_8mm_std_hdmi-userdebug VisionCB-8M-STD carrier board with SL-MIPI-LVDS-HDMI-CNV converter

	~~== Building~~ the ~~system image ==~~		Each configuration supports the VisionSOM-8MM modules with 2GB RAM memory and one of the following storage options:
			* 16GB eMMC
			* 32GB eMMC
			* 16GB SD card
			* 32GB SD card

	~~Having all sources ready,~~ we can ~~go on~~ to system ~~image compilation:~~		The system image may be compiled using the following commands. The ''visioncb_8mm_std_dsi-userdebug'' configuration name may be changed to one of the previously mentioned options. By changing the -j16 option we can assign more processor cores to the compilation jobs. More information about available configuration options can be found in the iMX Android system documentation.

	<pre>		<pre>
	cd $MY_ANDROID		cd $MY_ANDROID
	source build/envsetup.sh		source build/envsetup.sh
	lunch ~~visionsom_8mm~~-userdebug		lunch visioncb_8mm_std_dsi-userdebug
	./imx-make.sh -j16		./imx-make.sh -j16
	</pre>		</pre>

	~~By changing~~ the ~~-j16 option we can assign more processor cores to~~ the ~~compilation jobs~~. ~~More information about available configuration options~~ can ~~be found in~~ the ~~iMX Android system documentation.~~		== Installing the compiled system ==

			The compiled system files are located in the output directory: $MY_ANDROID/out/target/product/. We can install them on the SD card or the eMMC memory using the scripts provided by NXP:

	~~== Installing the compiled system ==~~		* 16GB SD card:
			<pre>
			sudo ./device/fsl/common/tools/fsl-sdcard-partition.sh -c 14 -D out/target/product/visioncb_8mm_std_dsi-userdebug/ -f imx8mm /dev/sdX
			</pre>

	~~The compiled system files are located in the output directory~~: ~~$MY_ANDROID~~/out/target/product/~~visionsom_8mm~~/~~. We can install them on the SD card or the eMMC memory using the scripts provided by NXP (at least 16GB storage memory is required):~~		* 32GB SD card:
			<pre>
			sudo ./device/fsl/common/tools/fsl-sdcard-partition.sh -c 28 -D out/target/product/visioncb_8mm_std_dsi-userdebug/ -f imx8mm /dev/sdX
			</pre>

	*~~SD card~~:		* 16GB eMMC:
	<pre>		<pre>
	sudo ./device/fsl/common/tools/~~fsl-sdcard-partition~~.sh -D out/target/product/~~visionsom_8mm~~/ -f imx8mm ~~/dev/sdX~~		sudo ./device/fsl/common/tools/uuu_imx_android_flash.sh -c 14 -D out/target/product/visioncb_8mm_std_dsi-userdebug/ -f imx8mm -a -e
	</pre>		</pre>

	*eMMC:		* 32GB eMMC:
	<pre>		<pre>
	sudo ./device/fsl/common/tools/uuu_imx_android_flash.sh -D out/target/product/~~visionsom_8mm~~/ -f imx8mm -a -e		sudo ./device/fsl/common/tools/uuu_imx_android_flash.sh -c 32 -D out/target/product/visioncb_8mm_std_dsi-userdebug/ -f imx8mm -a -e
	</pre>		</pre>

	In the ~~second case~~ we need the UUU version 1.3.124 (https://github.com/NXPmicro/mfgtools/releases). It needs to be available in the system PATH.		For the eMMC memory programming we also need the UUU version 1.3.124 (https://github.com/NXPmicro/mfgtools/releases). It needs to be available in the system PATH.

KrzysztofChojnowski at 12:17, 29 March 2021

2021-03-29T12:17:29Z

← Older revision		Revision as of 12:17, 29 March 2021
Line 86:		Line 86:
	git clone https://github.com/SoMLabs/somlabs-linux-imx.git -b somlabs_imx_android-10.0.0_2.5.0 kernel_imx		git clone https://github.com/SoMLabs/somlabs-linux-imx.git -b somlabs_imx_android-10.0.0_2.5.0 kernel_imx
	git clone https://github.com/SoMLabs/somlabs-imx-mkimage.git -b somlabs-android-10.0.0_2.5.0 imx-mkimage		git clone https://github.com/SoMLabs/somlabs-imx-mkimage.git -b somlabs-android-10.0.0_2.5.0 imx-mkimage
			git clone https://github.com/SoMLabs/imx_android_visionsom_8mm_demo_app.git somlabsdemo

	cd $MY_ANDROID/device/fsl/imx8m		cd $MY_ANDROID/device/fsl/imx8m

KrzysztofChojnowski at 16:13, 22 January 2021

2021-01-22T16:13:18Z

← Older revision		Revision as of 16:13, 22 January 2021
Line 1:		Line 1:
	{{PageHeader\|iMX Android for VisionSOM modules}} __toc__		{{PageHeader\|iMX Android for VisionSOM modules}} __toc__

	This tutorial explains how to build the iMX Android 10.0.0_2.3.0 system image for the VisionSOM modules. It uses the following kernel and u-boot repositories:		This tutorial explains how to build the iMX Android 10.0.0_2.5.0 system image for the VisionSOM modules. It uses the following kernel and u-boot repositories:

	* kernel (5.4.47): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_android-10.0.0_2.5.0		* kernel (5.4.47): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_android-10.0.0_2.5.0

KrzysztofChojnowski at 16:12, 22 January 2021

2021-01-22T16:12:57Z

KrzysztofChojnowski at 14:51, 15 January 2021

2021-01-15T14:51:15Z

← Older revision		Revision as of 14:51, 15 January 2021
Line 124:		Line 124:
	*SD card:		*SD card:
	<pre>		<pre>
	sudo ./device/fsl/common/tools/fsl-sdcard-partition.sh -D out/target/product/visionsom_8mm/ -f imx8mm /dev/~~sdd~~		sudo ./device/fsl/common/tools/fsl-sdcard-partition.sh -D out/target/product/visionsom_8mm/ -f imx8mm /dev/sdX
	</pre>		</pre>

KrzysztofChojnowski at 12:38, 15 January 2021

2021-01-15T12:38:15Z

← Older revision		Revision as of 12:38, 15 January 2021
Line 91:		Line 91:

	cd $MY_ANDROID/device/fsl		cd $MY_ANDROID/device/fsl
	git apply $MY_ANDROID/../device_fsl.patch		git apply $MY_ANDROID/device/fsl/imx8m/visionsom_8mm/patch/device_fsl.patch

	cd $MY_ANDROID/hardware/broadcom/libbt		cd $MY_ANDROID/hardware/broadcom/libbt
	git apply $MY_ANDROID/../broadcom_libbt.patch		git apply $MY_ANDROID/device/fsl/imx8m/visionsom_8mm/patch/broadcom_libbt.patch
	</pre>		</pre>

KrzysztofChojnowski at 11:53, 15 January 2021

2021-01-15T11:53:45Z

← Older revision		Revision as of 11:53, 15 January 2021
Line 71:		Line 71:
	export AARCH64_GCC_CROSS_COMPILE=~/dev/imx-android/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-		export AARCH64_GCC_CROSS_COMPILE=~/dev/imx-android/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-
	</pre>		</pre>


	== Obtaining the VisionSOM support ==		== Obtaining the VisionSOM support ==

← Older revision		Revision as of 16:12, 22 January 2021
Line 3:		Line 3:
	This tutorial explains how to build the iMX Android 10.0.0_2.3.0 system image for the VisionSOM modules. It uses the following kernel and u-boot repositories:		This tutorial explains how to build the iMX Android 10.0.0_2.3.0 system image for the VisionSOM modules. It uses the following kernel and u-boot repositories:

	* kernel (5.4.24): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_android-10.0.0_2.3.0		* kernel (5.4.47): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_android-10.0.0_2.5.0
	* u-boot (2020.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-imx_v2020.04_5.4.~~24_2~~.1.0		* u-boot (2020.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-imx_v2020.04_5.4.47_2.2.0

	== Introduction ==		== Introduction ==
Line 14:		Line 14:
	The full documentation package for the described Android version can be downloaded directly from the following link:		The full documentation package for the described Android version can be downloaded directly from the following link:

	https://www.nxp.com/docs/en/supporting-information/android_Q10.0.0_2.3.0_docs.zip		https://www.nxp.com/docs/en/supporting-information/android_Q10.0.0_2.5.0_docs.zip

	== Host system prerequisites ==		== Host system prerequisites ==
Line 61:		Line 61:
	First of all we need the iMX source package that may be downloaded from the NXP website (login is required):		First of all we need the iMX source package that may be downloaded from the NXP website (login is required):

	https://www.nxp.com/webapp/Download?colCode=Q10.0.0_2.3.0_ANDROID_SOURCE		https://www.nxp.com/webapp/Download?colCode=Q10.0.0_2.5.0_ANDROID_SOURCE

	Next we need to extract the archive, source the setup file and set required environmental variables:		Next we need to extract the archive, source the setup file and set required environmental variables:

	<pre>		<pre>
	tar -xf imx-android-10.0.0_2.3.0.tar.gz		tar -xf imx-android-10.0.0_2.5.0.tar.gz
	source imx-android-10.0.0_2.3.0/imx_android_setup.sh		source imx-android-10.0.0_2.5.0/imx_android_setup.sh
	export MY_ANDROID=~/dev/imx-android/android_build		export MY_ANDROID=~/dev/imx-android/android_build
	export AARCH64_GCC_CROSS_COMPILE=~/dev/imx-android/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-		export AARCH64_GCC_CROSS_COMPILE=~/dev/imx-android/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-
Line 82:		Line 82:
	mkdir $MY_ANDROID/vendor/somlabs		mkdir $MY_ANDROID/vendor/somlabs
	cd $MY_ANDROID/vendor/somlabs		cd $MY_ANDROID/vendor/somlabs
	git clone https://github.com/SoMLabs/somlabs-imx-atf.git -b somlabs-imx-~~atf_2~~.2 arm-trusted-firmware		git clone https://github.com/SoMLabs/somlabs-imx-atf.git -b somlabs-imx-atf_android-10.0.0_2.5.0 arm-trusted-firmware
	git clone https://github.com/SoMLabs/somlabs-uboot-imx.git -b somlabs-imx_v2020.04_5.4.~~24_2~~.1.0 uboot-imx		git clone https://github.com/SoMLabs/somlabs-uboot-imx.git -b somlabs-imx_v2020.04_5.4.47_2.2.0 uboot-imx
	git clone https://github.com/SoMLabs/somlabs-linux-imx.git -b somlabs_imx_android-10.0.0_2.3.0 kernel_imx		git clone https://github.com/SoMLabs/somlabs-linux-imx.git -b somlabs_imx_android-10.0.0_2.5.0 kernel_imx
	git clone https://github.com/SoMLabs/somlabs-imx-mkimage.git -b somlabs-android-10.0.0_2.3.0 imx-mkimage		git clone https://github.com/SoMLabs/somlabs-imx-mkimage.git -b somlabs-android-10.0.0_2.5.0 imx-mkimage

	cd $MY_ANDROID/device/fsl/imx8m		cd $MY_ANDROID/device/fsl/imx8m
	git clone https://github.com/SoMLabs/imx_android_visionsom_8mm.git visionsom_8mm		git clone https://github.com/SoMLabs/imx_android_visionsom_8mm.git -b android-10.0.0_2.5.0 visionsom_8mm

	cd $MY_ANDROID/device/fsl		cd $MY_ANDROID/device/fsl