VisionSOM imx-meta-somlabs - Revision history

KrzysztofChojnowski at 10:03, 19 November 2021

2021-11-19T10:03:13Z

← Older revision		Revision as of 10:03, 19 November 2021
Line 1:		Line 1:
	{{PageHeader\|VisionSOM imx-meta-somlabs layer for ~~NXP~~ Yocto Zeus}} __toc__		{{PageHeader\|VisionSOM imx-meta-somlabs layer for iMX Yocto Zeus}} __toc__

	This tutorial explains how to build the Yocto zeus system for the VisionSOM modules. The Yocto system uses the following kernel and u-boot repositories:		This tutorial explains how to build the Yocto zeus system for the VisionSOM modules. The Yocto system uses the following kernel and u-boot repositories:

KrzysztofChojnowski at 10:02, 19 November 2021

2021-11-19T10:02:27Z

← Older revision		Revision as of 10:02, 19 November 2021
Line 1:		Line 1:
	{{PageHeader\|VisionSOM imx-meta-somlabs layer for NXP Yocto}} __toc__		{{PageHeader\|VisionSOM imx-meta-somlabs layer for NXP Yocto Zeus}} __toc__

	This tutorial explains how to build the Yocto zeus system for the VisionSOM modules. The Yocto system uses the following kernel and u-boot repositories:		This tutorial explains how to build the Yocto zeus system for the VisionSOM modules. The Yocto system uses the following kernel and u-boot repositories:

KrzysztofChojnowski at 13:54, 26 April 2021

2021-04-26T13:54:05Z

← Older revision		Revision as of 13:54, 26 April 2021
Line 66:		Line 66:
	System building may be configured for one of the available machine configurations:		System building may be configured for one of the available machine configurations:

	* visioncb-6ull-std~~-emmc-btwifi - VisionCB-6ULL-STD board with eMMC and wireless modem VisionSOM-6ULL version~~		* visioncb-6ull-std - VisionCB-6ULL-STD board with VisionSOM-6ULL modules
	* visioncb-6ull-std-emmc - VisionCB-6ULL-STD board with ~~eMMC VisionSOM-6ULL version~~
	* visioncb-6ull-std-sd-btwifi - VisionCB-6ULL-STD board with SD-card and wireless modem VisionSOM-6ULL version
	* visioncb-6ull-std-sd - VisionCB-6ULL-STD board with SD-card VisionSOM-6ULL ~~version~~
	* visionsom-8mm-cb - VisionCB-8M board family with VisionSOM-8Mmini modules		* visionsom-8mm-cb - VisionCB-8M board family with VisionSOM-8Mmini modules

KrzysztofChojnowski at 09:49, 22 March 2021

2021-03-22T09:49:03Z

← Older revision		Revision as of 09:49, 22 March 2021
Line 17:		Line 17:

	<pre>		<pre>
	sudo apt-get install ~~repo~~ gawk wget git diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev xterm sed cvs subversion coreutils texi2html docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils libgl1-mesa-dev libglu1-mesa-dev mercurial autoconf automake groff curl lzop asciidoc u-boot-tools		sudo apt-get install gawk wget git diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev xterm sed cvs subversion coreutils texi2html docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils libgl1-mesa-dev libglu1-mesa-dev mercurial autoconf automake groff curl lzop asciidoc u-boot-tools
	</pre>		</pre>

Line 25:		Line 25:
	git config --global user.email "you@example.com"		git config --global user.email "you@example.com"
	git config --global user.name "Your Name"		git config --global user.name "Your Name"
			</pre>

			A new repo tool version is also required. It may be downloaded directly from the project site. The repo binary needs to be available in the system PATH variable and have the execution privilege:

			<pre>
			wget https://storage.googleapis.com/git-repo-downloads/repo
			sudo mv repo /usr/bin/repo
			sudo chmod a+x /usr/bin/repo
	</pre>		</pre>

KrzysztofChojnowski at 09:04, 27 January 2021

2021-01-27T09:04:29Z

← Older revision		Revision as of 09:04, 27 January 2021
Line 29:		Line 29:
	== System image ==		== System image ==

	This layer should be used in order to build the ~~fsl~~-image-~~validation-imx~~ image. It includes the SoMLabs demo application using the GTK and GStreamer libraries.		This layer should be used in order to build the imx-image-multimedia image. It includes the SoMLabs demo application using the GTK and GStreamer libraries.

	== Building the system image ==		== Building the system image ==

KrzysztofChojnowski at 09:04, 27 January 2021

2021-01-27T09:04:08Z

← Older revision		Revision as of 09:04, 27 January 2021
Line 4:		Line 4:

	* kernel (5.4.47): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_5.4.47_2.2.0		* kernel (5.4.47): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_5.4.47_2.2.0
	* u-boot ~~for VisionSOM-6ULL (2019.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-lf-5.4.y_v2019.04~~		* u-boot (2020.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-imx_v2020.04_5.4.47_2.2.0
	* u-boot for VisionSOM-8Mmini(2020.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-imx_v2020.04_5.4.47_2.2.0

	== Introduction ==		== Introduction ==

	Meta-somlabs is a layer providing the VisionSOM-6ULL with VisionCB-6ULL-STD carrier board and VisionSOM-8MM with VisionCB-8M~~-STD~~ hardware support for Yocto-based NXP Linux system.		Meta-somlabs is a layer providing the VisionSOM-6ULL with VisionCB-6ULL-STD carrier board and VisionSOM-8MM with VisionCB-8M boards hardware support for Yocto-based NXP Linux system.

	== Host system prerequisites ==		== Host system prerequisites ==
Line 69:		Line 68:
	<pre>		<pre>
	DISTRO=fsl-imx-wayland MACHINE=<SELECTED_MACHINE> source imx-setup-release.sh -b <BUILD_DIRECTORY>		DISTRO=fsl-imx-wayland MACHINE=<SELECTED_MACHINE> source imx-setup-release.sh -b <BUILD_DIRECTORY>
	bitbake ~~fsl~~-image-~~validation-imx~~		bitbake imx-image-multimedia
	</pre>		</pre>

	The system image is located in the ~~fsl~~-image-~~validation-imx~~-<SELECTED_MACHINE>.wic.bz2 file in the tmp/deploy/images/<SELECTED_MACHINE> directory. It should be extracted and installed on a SD-card:		The system image is located in the imx-image-multimedia-<SELECTED_MACHINE>.wic.bz2 file in the tmp/deploy/images/<SELECTED_MACHINE> directory. It should be extracted and installed on a SD-card:

	<pre>		<pre>
	bunzip2 -dkf ~~fsl~~-image-~~validation-imx~~-<SELECTED_MACHINE>.wic.bz2		bunzip2 -dkf imx-image-multimedia-<SELECTED_MACHINE>.wic.bz2
	sudo dd if=~~fsl~~-image-~~validation-imx~~-<SELECTED_MACHINE>.wic of=/dev/sdX bs=1M		sudo dd if=imx-image-multimedia-<SELECTED_MACHINE>.wic of=/dev/sdX bs=1M
	</pre>		</pre>

KrzysztofChojnowski at 13:51, 20 January 2021

2021-01-20T13:51:13Z

← Older revision		Revision as of 13:51, 20 January 2021
Line 3:		Line 3:
	This tutorial explains how to build the Yocto zeus system for the VisionSOM modules. The Yocto system uses the following kernel and u-boot repositories:		This tutorial explains how to build the Yocto zeus system for the VisionSOM modules. The Yocto system uses the following kernel and u-boot repositories:

	* kernel (5.4.57): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_5.4.47_2.2.0		* kernel (5.4.47): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_5.4.47_2.2.0
	* u-boot for VisionSOM-6ULL (2019.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-lf-5.4.y_v2019.04		* u-boot for VisionSOM-6ULL (2019.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-lf-5.4.y_v2019.04
	* u-boot for VisionSOM-8Mmini(2020.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-imx_v2020.04_5.4.47_2.2.0		* u-boot for VisionSOM-8Mmini(2020.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-imx_v2020.04_5.4.47_2.2.0

KrzysztofChojnowski at 13:50, 20 January 2021

2021-01-20T13:50:53Z

← Older revision		Revision as of 13:50, 20 January 2021
Line 3:		Line 3:
	This tutorial explains how to build the Yocto zeus system for the VisionSOM modules. The Yocto system uses the following kernel and u-boot repositories:		This tutorial explains how to build the Yocto zeus system for the VisionSOM modules. The Yocto system uses the following kernel and u-boot repositories:

	* kernel (5.4.24): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_5.4.~~24_2~~.1.0		* kernel (5.4.57): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_5.4.47_2.2.0
	* u-boot for VisionSOM-6ULL (2019.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-lf-5.4.y_v2019.04		* u-boot for VisionSOM-6ULL (2019.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-lf-5.4.y_v2019.04
	* u-boot for VisionSOM-8Mmini(2020.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-imx_v2020.04_5.4.~~24_2~~.1.0		* u-boot for VisionSOM-8Mmini(2020.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-imx_v2020.04_5.4.47_2.2.0

	== Introduction ==		== Introduction ==
Line 43:		Line 43:
	mkdir imx-yocto-bsp		mkdir imx-yocto-bsp
	cd imx-yocto-bsp		cd imx-yocto-bsp
	repo init -u https://source.codeaurora.org/external/imx/imx-manifest -b imx-linux-zeus -m imx-5.4.24-2.1.0.xml		repo init -u https://source.codeaurora.org/external/imx/imx-manifest -b imx-linux-zeus -m imx-5.4.47-2.2.0.xml
	repo sync		repo sync
	cd sources		cd sources
Line 63:		Line 63:
	* visioncb-6ull-std-sd-btwifi - VisionCB-6ULL-STD board with SD-card and wireless modem VisionSOM-6ULL version		* visioncb-6ull-std-sd-btwifi - VisionCB-6ULL-STD board with SD-card and wireless modem VisionSOM-6ULL version
	* visioncb-6ull-std-sd - VisionCB-6ULL-STD board with SD-card VisionSOM-6ULL version		* visioncb-6ull-std-sd - VisionCB-6ULL-STD board with SD-card VisionSOM-6ULL version
	* visionsom-8mm-cb~~-std~~ - VisionCB-8M~~-STD~~ board with VisionSOM-~~8MM module~~		* visionsom-8mm-cb - VisionCB-8M board family with VisionSOM-8Mmini modules

	System building may be started by the following commands (the first one needs to be called from the ''imx-yocto-bsp'' directory):		System building may be started by the following commands (the first one needs to be called from the ''imx-yocto-bsp'' directory):
Line 72:		Line 72:
	</pre>		</pre>

	The system image is located in the fsl-image-validation-imx-<SELECTED_MACHINE>.~~sdcard~~.bz2 file in the tmp/deploy/images/<SELECTED_MACHINE> directory. It should be extracted and installed on a SD-card:		The system image is located in the fsl-image-validation-imx-<SELECTED_MACHINE>.wic.bz2 file in the tmp/deploy/images/<SELECTED_MACHINE> directory. It should be extracted and installed on a SD-card:

	<pre>		<pre>
	bunzip2 -dkf fsl-image-validation-imx-<SELECTED_MACHINE>.~~sdcard~~.bz2		bunzip2 -dkf fsl-image-validation-imx-<SELECTED_MACHINE>.wic.bz2
	sudo dd if=fsl-image-validation-imx-<SELECTED_MACHINE>.~~sdcard~~ of=/dev/sdX bs=1M		sudo dd if=fsl-image-validation-imx-<SELECTED_MACHINE>.wic of=/dev/sdX bs=1M
	</pre>		</pre>

KrzysztofChojnowski at 18:57, 21 December 2020

2020-12-21T18:57:13Z

← Older revision		Revision as of 18:57, 21 December 2020
Line 4:		Line 4:

	* kernel (5.4.24): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_5.4.24_2.1.0		* kernel (5.4.24): https://github.com/SoMLabs/somlabs-linux-imx/tree/somlabs_imx_5.4.24_2.1.0
	* u-boot (2019.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-lf-5.4.y_v2019.04		* u-boot for VisionSOM-6ULL (2019.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-lf-5.4.y_v2019.04
			* u-boot for VisionSOM-8Mmini(2020.04): https://github.com/SoMLabs/somlabs-uboot-imx/tree/somlabs-imx_v2020.04_5.4.24_2.1.0

	== Introduction ==		== Introduction ==
Line 42:		Line 43:
	mkdir imx-yocto-bsp		mkdir imx-yocto-bsp
	cd imx-yocto-bsp		cd imx-yocto-bsp
	repo init -u https://source.codeaurora.org/external/imx/imx-manifest -b imx-linux-zeus -m imx-5.4.3-2.0.0.xml		repo init -u https://source.codeaurora.org/external/imx/imx-manifest -b imx-linux-zeus -m imx-5.4.24-2.1.0.xml
	repo sync		repo sync
	cd sources		cd sources

KrzysztofChojnowski at 08:49, 4 October 2020

2020-10-04T08:49:15Z

← Older revision		Revision as of 08:49, 4 October 2020
Line 49:		Line 49:
	</pre>		</pre>

	The following lines need to be added at the end of the imx-yocto-bsp/imx-setup-release.sh file in order to add the meta-somlabs layer to build and enable the commercial license in build (for example with nano editor: ''nano ~~../~~imx-setup-release.sh''):		The following lines need to be added at the end of the imx-yocto-bsp/imx-setup-release.sh file in order to add the meta-somlabs layer to build and enable the commercial license in build (for example with nano editor: ''nano imx-setup-release.sh''):

	<pre>		<pre>