Personal tools

VisionCB-IND-HDMI Datasheet and Pinout: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
← Older edit
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 102: Line 102:


== Onboard LEDs ==
== Onboard LEDs ==
[[File:VisionCB-IND-1-4-LEDs.png|center|400px]]
[[File:VisionCB-IND-HDMI-1-4-LEDs.png|center|400px]]




Line 122: Line 122:


== 2x25 pin header ==
== 2x25 pin header ==
[[File:VisionCB-IND-1-4-GPIO.png|center|400px]]
[[File:VisionCB-IND-HDMI-1-4-GPIO.png|center|400px]]




Line 133: Line 133:
| 1
| 1
| CSI-HSYNC
| CSI-HSYNC
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 2
| 2
| CSI-VSYNC
| CSI-VSYNC
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 3
| 3
| CSI-DATA0
| CSI-DATA0
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 4
| 4
| CSI-DATA2
| CSI-DATA2
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 5
| 5
| CSI-DATA1
| CSI-DATA1
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 6
| 6
| CSI-DATA3
| CSI-DATA3
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 7
| 7
| CSI-DATA4
| CSI-DATA4
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 8
| 8
| CSI-DATA5
| CSI-DATA5
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 9
| 9
| CSI-MCLK
| CSI-MCLK
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 10
| 10
| CSI-DATA7
| CSI-DATA7
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 11
| 11
| CSI_PIXCLK
| CSI_PIXCLK
| -
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
|-
|-
| 12
| 12
| CSI-DATA6
| CSI-DATA6
| Universal GPIO with 3.3V logic levels.
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.  
|-
|-
| 13
| 13
Line 241: Line 241:
| 28
| 28
| JTAG-nTRST
| JTAG-nTRST
| -
| JTAG TRST input line (active L).
|-
|-
| 29
| 29
| UART3-RXD
| UART3-RXD
| -
| Default: UART3 RxD input or universal GPIO with 3.3V logic levels.
|-
|-
| 30
| 30
Line 257: Line 257:
| 32
| 32
| SNVS-TAMPER2
| SNVS-TAMPER2
|
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 33
| 33
Line 265: Line 265:
| 34
| 34
| SNVS-TAMPER3
| SNVS-TAMPER3
| -
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 35
| 35
Line 273: Line 273:
| 36
| 36
| SNVS-TAMPER4
| SNVS-TAMPER4
| -
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 37
| 37
Line 281: Line 281:
| 38
| 38
| SNVS-TAMPER5
| SNVS-TAMPER5
| -
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 39
| 39
| SNVS-TAMPER0
| SNVS-TAMPER0
| -
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 40
| 40
| I2C-SCL
| I2C-SCL
| -
| Universal GPIO with 3.3V logic levels.
|-
|-
| 41
| 41
| SNVS-TAMPER1
| SNVS-TAMPER1
| -
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 42
| 42
| I2C-SDA
| I2C-SDA
| -
| Universal GPIO with 3.3V logic levels.
|-
|-
| 43
| 43
Line 334: Line 334:
== HDMI connector ==
== HDMI connector ==
[[File:VisionCB-IND-HDMI-1-4-lcd.png|center|400px]]
[[File:VisionCB-IND-HDMI-1-4-lcd.png|center|400px]]
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | J400 pin
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | LCD interface name
|-
| 1
| LCD-DATA0
| LCD-B0
|-
| 2
| LCD-DATA1
| LCD-B1
|-
| 3
| LCD-DATA2
| LCD-B2
|-
| 4
| LCD-DATA3
| LCD-B3
|-
| 5
| LCD-DATA4
| LCD-B4
|-
| 6
| LCD-DATA5
| LCD-B5
|-
| 7
| LCD-DATA6
| LCD-B6
|-
| 8
| LCD-DATA7
| LCD-B7
|-
| 9
| GND
| GND
|-
| 10
| LCD-DATA8
| LCD-G0
|-
| 11
| LCD-DATA9
| LCD-G1
|-
| 12
| LCD-DATA10
| LCD-G2
|-
| 13
| LCD-DATA11
| LCD-G3
|-
| 14
| LCD-DATA12
| LCD-G4
|-
| 15
| LCD-DATA13
| LCD-G5
|-
| 16
| LCD-DATA14
| LCD-G6
|-
| 17
| LCD-DATA15
| LCD-G7
|-
| 18
| GND
| GND
|-
| 19
| LCD-DATA16
| LCD-R0
|-
| 20
| LCD-DATA17
| LCD-R1
|-
| 21
| LCD-DATA18
| LCD-R2
|-
| 22
| LCD-DATA19
| LCD-R3
|-
| 23
| LCD-DATA20
| LCD-R4
|-
| 24
| LCD-DATA21
| LCD-R5
|-
| 25
| LCD-DATA22
| LCD-R6
|-
| 26
| LCD-DATA23
| LCD-R7
|-
| 27
| GND
| GND
|-
| 28
| LCD-DE
| DE
|-
| 29
| LCD-HSYNC
| HSYNC
|-
| 30
| LCD-VSYNC
| VSYNC
|-
| 31
| GND
| GND
|-
| 32
| LCD-PCLK
| DCLK
|-
| 33
| GND
| GND
|-
| 34
| GPIO4
| TS-YPUL
|-
| 35
| GPIO3
| TS-YNUR
|-
| 36
| GPIO2
| TS-YPLL
|-
| 37
| GPIO1
| TS-YNLR
|-
| 38
| -
| -
|-
| 39
| -
| -
|-
| 40
| -
| -
|-
| 41
| -
| -
|-
| 42
| UART5-TXD
| I2C-SCL
|-
| 43
| UART5-RXD
| I2C-SDA
|-
| 44
| GND
| GND
|-
| 45
| VCC-LCD
| +3.3V (controlled by ENET2_TXEN)
|-
| 46
| VCC-LCD
| +3.3V (controlled by ENET2_TXEN)
|-
| 47
| VCC-5V0
| +5.0V
|-
| 48
| VCC-5V0
| +5.0V
|-
| 49
| LCD-RESET
| RESET
|-
| 50
| JTAG-nTRST
| PWREN
|}


== Dimensions ==
== Dimensions ==
[[File:VisionCB-IND-HDMI-1-4-PCB-size.png|center|600px]]
[[File:VisionCB-IND-HDMI-1-4-PCB-size.png|center|600px]]

Latest revision as of 11:14, 7 November 2018

VisionCB-IND-HDMI Datasheet and Pinout

General description

VisionCB-IND-HDMI is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as HDMI video output, USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector.

Applications

  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid Infrastructure
  • IoT gateways
  • Residential getaways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment

Features

  • Industrial grade Carrier Board (Base Board) compatible with the VisionSOM family of modules based on NXP i.MX 6UL / 6ULL application processors
  • Core clock up to 696MHz (VisionSOM-6UL) or up to 900MHz (VisionSOM-6ULL)
  • Up to 512MB SDRAM DDR3L (depends on used VisionSOM module)
  • Up to 512MB NAND Flash / 32GB eMMC / uSD memory card (depends on used VisionSOM module)
  • Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.1+EDR module
  • SoM Interface: SODIMM200
  • Expansion Connectors:
    • 2x25 Pin Headers (Female)
    • microSD Card socket
  • Communication Connectors:
    • 1x Ethernet 10/100Mbit/s, RJ45
    • 2x USB Host Type A connectors
    • 1x USB OTG Micro AB connector
  • Display Interface: HDMI Connector (1366 x 768 Max. Resolution)
  • Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)
  • Power Supply
    • Terminal block connector: Input Voltage 9-12V DC
  • Temperature Range: 0 to +70°C
  • Board Size: 98mm x 79mm x 22mm

Pictures of VisionCB-IND-HDMI board

Version Photo
VisionCB-IND-HDMI board only
VisionCB-IND-HDMI board with VisionSOM-6ULL

Ordering info

VisionCB-IND-HDMI

Block Diagram

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply (Con100 input) 9.0 11.0 12.0 V Polarized terminal block connector
Supply current - - 0.15 A Excluding LCD, USB and antoher external loads
Output GPIO voltage (Con1) 0 - 3.3 V GPIO connector (current limited; max <250mA [RMS])

Onboard LEDs


LED Color Description
LED100 (PWR) Green Power indicator
LED200 (USB OVR) Red USB Overcurrent indicator

2x25 pin header


J504 Pin Default function name Description
1 CSI-HSYNC Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
2 CSI-VSYNC Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
3 CSI-DATA0 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
4 CSI-DATA2 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
5 CSI-DATA1 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
6 CSI-DATA3 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
7 CSI-DATA4 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
8 CSI-DATA5 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
9 CSI-MCLK Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
10 CSI-DATA7 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
11 CSI_PIXCLK Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
12 CSI-DATA6 Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
13 ENET2_TXD0 Default: ENET2 TXD0 line or universal GPIO with 3.3V logic levels.
14 UART3-RTS Default: UART3 RTS line or universal GPIO with 3.3V logic levels.
15 ENET2_TXEN Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels.
16 UART2-RTS Default: UART2 RTS line or universal GPIO with 3.3V logic levels.
17 ENET2_CRS_DV Default: ENET2 CRS_DV line or universal GPIO with 3.3V logic levels.
18 UART3-CTS Default: UART3 CTS line or universal GPIO with 3.3V logic levels.
19 ENET2_RXD1 Default: ENET2 RXD1 line or universal GPIO with 3.3V logic levels.
20 UART1-RTS Default: UART1 RTS line or universal GPIO with 3.3V logic levels.
21 ENET2_RXER Default: ENET2 RXER line or universal GPIO with 3.3V logic levels.
22 UART2-CTS Default: UART2 CTS line or universal GPIO with 3.3V logic levels.
23 ENET2_TX_CLK Default: ENET2 TX_CLK line or universal GPIO with 3.3V logic levels.
24 UART1-CTS Default: UART1 CTS line or universal GPIO with 3.3V logic levels.
25 UART4-RXD Default: UART4 RXD input or universal GPIO with 3.3V logic levels.
26 JTAG-TCK Default: JTAG TCK input or universal GPIO with 3.3V logic levels.
27 UART4-TXD Default: UART4 TXD output or universal GPIO with 3.3V logic levels.
28 JTAG-nTRST JTAG TRST input line (active L).
29 UART3-RXD Default: UART3 RxD input or universal GPIO with 3.3V logic levels.
30 JTAG-TMS Default: JTAG TMS output or universal GPIO with 3.3V logic levels.
31 UART2-RXD Default: UART2 RXD input or universal GPIO with 3.3V logic levels.
32 SNVS-TAMPER2 Tamper input (SNVS power domain) or GPIO 3.3V.
33 UART2-TXD Default: UART2 TXD input or universal GPIO with 3.3V logic levels.
34 SNVS-TAMPER3 Tamper input (SNVS power domain) or GPIO 3.3V.
35 UART1-RXD Default: UART1 RXD input or universal GPIO with 3.3V logic levels.
36 SNVS-TAMPER4 Tamper input (SNVS power domain) or GPIO 3.3V.
37 UART1-TXD Default: UART1 TXD input or universal GPIO with 3.3V logic levels.
38 SNVS-TAMPER5 Tamper input (SNVS power domain) or GPIO 3.3V.
39 SNVS-TAMPER0 Tamper input (SNVS power domain) or GPIO 3.3V.
40 I2C-SCL Universal GPIO with 3.3V logic levels.
41 SNVS-TAMPER1 Tamper input (SNVS power domain) or GPIO 3.3V.
42 I2C-SDA Universal GPIO with 3.3V logic levels.
43 GPIO5 Default: General purpose pin GPIO5
44 JTAG-TDI Default: JTAG TDI input or universal GPIO with 3.3V logic levels.
45 GPIO8 Default: General purpose pin GPIO8
46 GPIO9 Default: General purpose pin GPIO9
47 VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
48 GND Ground
49 VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
50 GND Ground

HDMI connector

Dimensions

Retrieved from "https://wiki.somlabs.com/index.php?title=VisionCB-IND-HDMI_Datasheet_and_Pinout&oldid=1132"