VisionSOM-6ULL Buildroot Developer Guide: Difference between revisions
From SomLabs Wiki
Created page with "{{PageHeader|VisionSOM-6ULL - Buildroot}} __toc__ = Introduction = Buildroot is a simple, efficient and easy-to-use tool to generate embedded Linux systems through cross-comp..." |
No edit summary |
||
| (9 intermediate revisions by 2 users not shown) | |||
| Line 8: | Line 8: | ||
Detailed manual can be found here: https://buildroot.org/docs.html | Detailed manual can be found here: https://buildroot.org/docs.html | ||
Its advantage is relatively short build time (in comparison i.e. to Yocto) - complete Linux image can be build in ca. 15-20 minutes on modern PC. | |||
It is also easy to learn and modify. | It is also easy to learn and modify. | ||
As for now, we provide our own buildroot tree source with changes for | As for now, we provide our own buildroot tree source with changes for SoMLabs VisionSOM 6ULL board. | ||
Buildroot is able also to build complete cross compiler (GCC) with necessary libraries, but we are using precompiled toolchain from Linaro. | Buildroot is able also to build complete cross compiler (GCC) with necessary libraries, but we are using precompiled toolchain from Linaro. | ||
= Host PC requirements = | = Host PC requirements = | ||
For building of embedded Linux system with Buildroot we need host PC, running Linux, recommended is 64-bit Ubuntu 16.04 or any derivative (Kubuntu/Mint18.x/etc.) | For building of embedded Linux system with Buildroot we need host PC, running Linux, recommended is 64-bit Ubuntu 16.04 or any derivative (Kubuntu/Mint18.x/etc.). | ||
As first step, some host tools | As the first step, some host tools need to be installed. To do this, start console and run following commands: | ||
<pre> | <pre> | ||
sudo apt-get install build-essential git subversion g++ g++-multilib libncurses5-dev | sudo apt-get install build-essential git subversion g++ g++-multilib libncurses5-dev | ||
| Line 26: | Line 26: | ||
To start build, first you need to obtain sources for buildroot. | To start build, first you need to obtain sources for buildroot. | ||
<pre> | <pre> | ||
git clone | git clone -b somlabs-2019.05.x https://github.com/somlabs/somlabs-buildroot | ||
</pre> | </pre> | ||
This command downloads complete source tree of buildroot from | This command downloads complete source tree of buildroot from github server. | ||
When operation is finished, go to directory "somlabs-buildroot" and start build process with proper configuration file, in the commands below replace DEFCONFIG_NAME with: | |||
* ''somlabs_visionsom_6ull_nand2G_defconfig'' for VisionSOM-6ULx with 2G/256MB NAND and without Murata wireless module | |||
* ''somlabs_visionsom_6ull_nand2G_wlan_bt_defconfig'' for VisionSOM-6ULx with 2G/256MB NAND and with Murata wireless module | |||
* ''somlabs_visionsom_6ull_defconfig'' for other VisionSOM-6ULx versions without Murata wireless module | |||
* ''somlabs_visionsom_6ull_wlan_bt_defconfig'' for other VisionSOM-6ULx versions with Murata wireless module | |||
<pre> | <pre> | ||
cd somlabs-buildroot | cd somlabs-buildroot | ||
make O=build-visionsom-6ull | make O=build-visionsom-6ull DEFCONFIG_NAME | ||
make O=build-visionsom-6ull all | make O=build-visionsom-6ull all | ||
</pre> | </pre> | ||
Complete build operation takes several minutes, so be patient. | Complete build operation takes several minutes, so be patient. | ||
= Flashing image to SD card = | = Flashing image to SD card = | ||
To prepare | To prepare a bootable SD card, the SD-Card reader (either build-in or external USB) is needed. | ||
Next, it is very important to find device file for SD card reader. | Next, it is very important to find device file for SD card reader. | ||
For most of internal readers, it will be "/dev/mmcblk0" | For most of internal readers, it will be "/dev/mmcblk0". | ||
For external USB readers, please check output of 'dmesg' command, run directly after attaching USB reader. | For external USB readers, please check output of 'dmesg' command, run directly after attaching USB the reader. | ||
Please look for line similar to: | Please look for line similar to: | ||
<pre> | <pre> | ||
| Line 48: | Line 54: | ||
</pre> | </pre> | ||
Instead of sdc could be i.e. sdb,sdd, etc. | Instead of sdc could be i.e. sdb,sdd, etc. | ||
For 'sdc' example given above, correct device path | For 'sdc' example given above, correct device path would be "/dev/sdc" | ||
To copy image to SD card, use following commands: | To copy image to SD card, use following commands: | ||
| Line 59: | Line 65: | ||
After issuing commands, wait until it is finished. | After issuing commands, wait until it is finished. | ||
Next, remove card from PC and put it into target board. | Next, remove the card from PC and put it into target board. | ||
Latest revision as of 16:26, 26 March 2020
VisionSOM-6ULL - Buildroot
Introduction
Buildroot is a simple, efficient and easy-to-use tool to generate embedded Linux systems through cross-compilation. It is build as a set of GNU make scripts and configuration files. Build configuration is controlled by kernel-style Kconfig tool, either in text or GUI mode. More details about buildroot could be found on website: buildroot.org Detailed manual can be found here: https://buildroot.org/docs.html
Its advantage is relatively short build time (in comparison i.e. to Yocto) - complete Linux image can be build in ca. 15-20 minutes on modern PC. It is also easy to learn and modify.
As for now, we provide our own buildroot tree source with changes for SoMLabs VisionSOM 6ULL board.
Buildroot is able also to build complete cross compiler (GCC) with necessary libraries, but we are using precompiled toolchain from Linaro.
Host PC requirements
For building of embedded Linux system with Buildroot we need host PC, running Linux, recommended is 64-bit Ubuntu 16.04 or any derivative (Kubuntu/Mint18.x/etc.).
As the first step, some host tools need to be installed. To do this, start console and run following commands:
sudo apt-get install build-essential git subversion g++ g++-multilib libncurses5-dev
Build process
To start build, first you need to obtain sources for buildroot.
git clone -b somlabs-2019.05.x https://github.com/somlabs/somlabs-buildroot
This command downloads complete source tree of buildroot from github server.
When operation is finished, go to directory "somlabs-buildroot" and start build process with proper configuration file, in the commands below replace DEFCONFIG_NAME with:
- somlabs_visionsom_6ull_nand2G_defconfig for VisionSOM-6ULx with 2G/256MB NAND and without Murata wireless module
- somlabs_visionsom_6ull_nand2G_wlan_bt_defconfig for VisionSOM-6ULx with 2G/256MB NAND and with Murata wireless module
- somlabs_visionsom_6ull_defconfig for other VisionSOM-6ULx versions without Murata wireless module
- somlabs_visionsom_6ull_wlan_bt_defconfig for other VisionSOM-6ULx versions with Murata wireless module
cd somlabs-buildroot make O=build-visionsom-6ull DEFCONFIG_NAME make O=build-visionsom-6ull all
Complete build operation takes several minutes, so be patient.
Flashing image to SD card
To prepare a bootable SD card, the SD-Card reader (either build-in or external USB) is needed. Next, it is very important to find device file for SD card reader. For most of internal readers, it will be "/dev/mmcblk0". For external USB readers, please check output of 'dmesg' command, run directly after attaching USB the reader. Please look for line similar to:
sd 4:0:0:1: [sdc] Attached SCSI removable disk
Instead of sdc could be i.e. sdb,sdd, etc. For 'sdc' example given above, correct device path would be "/dev/sdc"
To copy image to SD card, use following commands:
sudo dd if=build-visionsom-6ull/images/sdcard.img of=DEV_PATH bs=1M sync
where 'DEV_PATH' is SD card device path described above.
After issuing commands, wait until it is finished.
Next, remove the card from PC and put it into target board.
