Personal tools

VisionCB-RT-STD: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
Created page with "{{Product|category1=SOM|category2=|image=VisionCB-RT-STD-1-0-1k.png |cpu=VisionSOM-RT - System on Module with NXP i.MX RT application procesor |ram=on-chip 512kB RAM<br>(depen..."
 
No edit summary
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
{{Product|category1=SOM|category2=|image=VisionCB-RT-STD-1-0-1k.png
{{Product|category1=SOM|category2=|image=VisionCB-RT-STD-1-0-1k.png
|cpu=VisionSOM-RT - System on Module with NXP i.MX RT application procesor
|cb_som_compatibility=VisionSOM-RT module with NXP i.MX-RT microcontroller
|ram=on-chip 512kB RAM<br>(depends on used VisionSOM)<br>or 32MB SDRAM
|cb_som_socket=SODIMM200
|storage=4 or 16MB QSPI Flash<br>(depends on used VisionSOM)
|cb_display_connector=24-bit RGB parallel interface (FPC50)
|camera=up to 24-bit CSI interface
|cb_network=1x Ethernet 10/100Mbit/s, RJ45
|display=24-bit RGB parallel interface
|cb_usb=USB 2.0 host x1, USB-OTG 2.0 x1
|net=1x Ethernet 10/100Mbit/s, RJ45
|cb_debugger=JTAG connector for external debugger
|temp= 0 to +70°C
|cb_console_interface=USB/UART
|usb= USB2.0 Host
|cb_switches=4+1 (reset)
|dim=145mm x 91mm x 17mm
|cb_leds=4 + 1 (power)
|cb_connectors=Raspberry Pi compatible (40 pins, 2,54mm), Arduino Rev3
|cb_rtc_backup=none
|cb_power_supply=External 9-12V DC
|dim=145mm x 90mm x 17mm
|description=VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT  application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>
|description=VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT  application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>



Latest revision as of 08:55, 7 April 2020

VisionCB-RT-STD
VisionCB-RT-STD VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
Specifications
SOM compatibilityVisionSOM-RT module with NXP i.MX-RT microcontroller
SOM socketSODIMM200
Display connector24-bit RGB parallel interface (FPC50)
Network1x Ethernet 10/100Mbit/s, RJ45
USBUSB 2.0 host x1, USB-OTG 2.0 x1
DebuggerJTAG connector for external debugger
Console interfaceUSB/UART
Switches4+1 (reset)
LEDs4 + 1 (power)
ConnectorsRaspberry Pi compatible (40 pins, 2,54mm), Arduino Rev3
RTC Backupnone
Power supplyExternal 9-12V DC
Dimensions145mm x 90mm x 17mm