StarSBC-6ULL-STD: Difference between revisions
From SomLabs Wiki
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 20: | Line 20: | ||
| | | | ||
content=  | content=  | ||
*[[ | *[[StarCB-6ULL-STD Datasheet and Pinout|StarCB-6ULL-STD Datasheet and Pinout]] | ||
__WP_Files( | __WP_Files(4532) | ||
}}{{DocBox|boxwidth=21|system=Howto | }}{{DocBox|boxwidth=21|system=Howto | ||
| | | | ||
content=  | content=  | ||
*[[ | *[[TBD|TBD]] | ||
}} | }} | ||
}} | }} | ||
Latest revision as of 14:15, 22 December 2022
| StarSBC-6ULL-STD |
|
StarCB-6ULL-STD is a carrier board for the StarSOM-6ULL family of computer-on-modules which are powered by NXP iMX6ULL MPU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, LCD, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via two board-to-boarf high speed connectors. |
Documentation
How to
| Specifications |
| SOM compatibility | StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7) |
| SOM socket | Square b2b (StarSOM-6ULL format) |
| Display connector | Parallel RGB 24 bit (FPC50) |
| Network | 1x Ethernet 10/100Mbit/s, RJ45 |
| USB | USB 2.0 host x1 USB-OTG 2.0 x1 |
| Console interface | USB/UART |
| Switches | 4/1 (user/system) |
| LEDs | 4/2/1 (user/system/diagnostic) |
| Connectors | QSPI (dual row 2x5 gold-pin) GPIOs (dual row 2x20 gold-pin) |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 130mm x 90mm x 20mm |
