Personal tools

Difference between revisions of "VisionSOM-V2L Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(SoM pinout)
(Electrical parameters)
Line 230: Line 230:
 
|-
 
|-
 
| V<sub>ETH1</sub> || I/O voltage for Ethernet 1 || 0 || 1.8 or 3.3<sup>4</sup> || - || V
 
| V<sub>ETH1</sub> || I/O voltage for Ethernet 1 || 0 || 1.8 or 3.3<sup>4</sup> || - || V
 
+
|-
 +
| V<sub>JTAG</sub> || I/O voltage for Ethernet 1 || 0 || 1.8<sup>5</sup> || - || V
 
|}
 
|}
 
Notes:<br />
 
Notes:<br />
Line 237: Line 238:
 
3. Input current is limited by 2,8kOhm resistor connected in series.<br />
 
3. Input current is limited by 2,8kOhm resistor connected in series.<br />
 
4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-uped.).<br />
 
4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-uped.).<br />
 +
5. JTAG/SWD interface lines are 1.8V compatible.
  
 
== SoM pinout ==
 
== SoM pinout ==

Revision as of 09:08, 4 September 2023

VisionSOM-V2L Datasheet and Pinout


General description

VisionSOM-V2L intro.jpg

The VisionSOM-V2L family is a SODIMM-sized SoM based on the Renesas dual core RZ/V2L application processor which features an advanced implementation of DRP-AI (ML+AI) coprocessor. The VisionSOM-V2L family offers energy efficient dual ARM Cortex-A55 cores (at speed up to 1.2GHz) and ARM Cortex-M33 core (at speed up to 200MHz) as well as a 3D Graphics Processing Unit (ARM Mali-G31 GPU @500MHz, 1920x1080 @60fps) with Open GL 3.2ES/OpenCL 2.0 (Full Profile) capabilities and Video Codec Processor (VCP) with 1920x1080 @30fps.

The VisionSOM-V2L is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power, optinally integrated 2.4GHz Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-V2L provides a variety memory configuration, including 1GB of fast and efficient DDR4 and eMMC Flash that meets our customers requirements.

The SoM supports connections to a variety of interfaces: two high-speed USB 2.0 with integrated PHY, dual Ethernet 1Gbit, audio, MIPI-DSI display output with optional touch panel, MIPI-CSI camera input with scaling processor, serial communication interfaces including 2xCAN. In addition, the system supports industrial grade embedded applications.

SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.


Applications

  • IoT Edge Devices
  • IoT gateways
  • Machine vision equipment
  • AI+ML Decision/Recognition Systems
  • Robotics
  • Human-machine Interfaces (HMI)
  • IP Cameras
  • Home Appliances
  • Home Automation – Smart Home
  • Residential gateways
  • Industrial embedded Linux computer
  • Fitness/outdoor equipment

Features

  • Powered by dual core Renesas RZ/V2L application processor (R9A07G054L27GBG)
  • Dual ARM Cortex-A55 core at speed up to 1.2GHz
  • ARM Cortex-M33 core at speed up to 200MHz
  • Integrated Machine-Learning (ML) and Artificial Intelligence (AI) AI Accelerator (DRP-AI)
  • Integrated 3D GPU (ARM Mali-G31 @500MHz)
  • 1GB RAM (DDR4)
  • Up to 32GB eMMC memory
  • Optional Murata radio module 2.4GHz Wi-Fi and Bluetooth v5.1
  • Built-in dual USB 2.0 interface
  • Built-in 2xCAN-FD interfaces
  • Built-in MIPI-DSI display interface
  • Built-in MIPI-CSI camera interface
  • Power-efficient and cost-optimized solution
  • Ideal for industrial IoT and embedded applications
  • Integrated security features

Pictures of SOM versions

Version Photo
eMMC
VisionSOM-x2L-eMMC-top.png
VisionSOM-x2L-eMMC-bottom.png
WiFi/BT module is available for all memory configurations.

Ordering info

SLS22CpuType_Clock_RamSize_FlashSize_SF_TEMP
SLSProduct type
SLS - System on Module
2SOM Name
2 - High Performance VisionSOM SODIM200 module
2CPU Family
2 - Renesas RZ/V2L family
CpuTypeCPU Type
RV2LDC - RZ/V2L dual Cortex-A55 + Cortex-M33 + DRP-AI
ClockCPU Clock Speed
1200C - 1.2GHz
RamSizeDDR4 RAM Size
01GR - 1GB (1024MB)
FlashSizeeMMC Memory Size
04GE - 4GB eMMC
08GE - 8GB eMMC
16GE - 16GB eMMC
32GE - 32GB eMMC
SFSpecial Features
0SF - No Special Features
1WB - Built-in 2.4GHz Wi-Fi and Bluetooth v5.1
TEMPOperating Temperature
E - Extended: -25 to +70 C
I - Industrial: -40 to +85 C

Block Diagram

VisionSOM-V2L-blokowy.png

Operating ranges

Parameter Value Unit Comment
Power Supply
5.0
V
Connected to VDD 5V SODIM260 pins
Max. input GPIO voltage
1.8/3.3
V
-
Environment temperature1
-40…+85
oC Industrial range w/o WiFi module
-30…+85
Industrial range with WiFi module
0…+70
Consumer range

Note:
1. Maximum MPU junction temperature is +105oC.
2. Junction temperature determines MPU lifetime. Details: NXP AN13214 Application Note.

Electrical parameters

SOM
signal name
Parameter Value Unit
Min. Typ. Max.
VDD-5V Supply Voltage (Input) 4.0 5.0 5.5 V
VDD-1V8 Output power supply for external 1.8V accesories - - 0.31 A
VDD-3V3 Output power supply for external 3.3V accesories - - 0.32 A
VGPIO @1V8 GPIO Input Voltage 0 - 2.05 V
VGPIO @3V3 GPIO Input Voltage 0 - 3.62 V
VUSB0-VBUS USB VBUS Input Voltage 0 - 5.253 V
VETH0 I/O voltage for Ethernet 0 0 1.8 - V
VETH1 I/O voltage for Ethernet 1 0 1.8 or 3.34 - V
VJTAG I/O voltage for Ethernet 1 0 1.85 - V

Notes:
1. Total current on both VDD-1V8 outputs.
1. Total current on both VDD-3V3 outputs.
3. Input current is limited by 2,8kOhm resistor connected in series.
4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-uped.).
5. JTAG/SWD interface lines are 1.8V compatible.

SoM pinout

Important notes:
1. Detail pin configurations description you can find, edit and arrange in dedicated SCFG file (with free "Smart Configurator" tool).
2. JTAG-MOD (ball G2) is permanently connected to GND
3. BOOT-MODE0 – RECOVERY line 0 -> BOOT-MODE0=1
4. BOOT-MODE1...MODE3 are premanently connected to GND
5. SDIO2 interface is used to communication with Murata 1ZM radio module
6. eMMC memory is connected to SDIO3 interface

SOM pin numer Default function GPIO BGA456 ball Notes
1 GND Power -
2 GND Power -
3 ET0-PHY-RST P47-1 A20 1.8V Power Domain
GPIO mode not allowed
4 PWR-GOOD Output PMIC power-good signalling for external devices
5 ET0-INT P47-0 B20 3.3V Power Domain
6 PWR-ON Input PMIC PWRON input (on-off function)
Internal pull-down
Connect to GND if not used
Connect to VDD-3V3 with external pull-up resistor (4.7kOhm) and pushbutton to GND if used
7 ET0-MDIO I/O U1 1.8V Power Domain
GPIO mode not allowed
8 PWR-FAIL Input PMIC enable-input:
PWR-FAIL='0' -> SOM power supply is off
PWR-FAIL='1' or left open -> SOM power supply is on
Can bue used as cold-reset input (active low)
9 ET0-MDC I/O U2 1.8V Power Domain
GPIO mode not allowed
10 RESET-OUT Output RESET output for external peripherals
11 GND Power -
12 RESET-IN Input MPU reset input, active low
13 ET0-RXC I/O P2 1.8V Power Domain
GPIO mode not allowed
14 GND Power -
15 ET0-RX-CTL I/O P1 1.8V Power Domain
GPIO mode not allowed
16 UART0-RXD P38-1 B15 3.3V Power Domain
17 ET0-RXD0 I/O R2 1.8V Power Domain
GPIO mode not allowed
18 UART0-TXD P38-0 A15 3.3V Power Domain
19 ET0-RXD1 I/O R1 1.8V Power Domain
GPIO mode not allowed
20 UART1-CTS P41-0 E17 3.3V Power Domain
21 ET0-RXD2 I/O T2 1.8V Power Domain
GPIO mode not allowed
22 UART1-RTS P41-1 A18 3.3V Power Domain
23 ET0-RXD3 I/O T1 1.8V Power Domain
GPIO mode not allowed
24 UART1-RXD P40-0 C17 3.3V Power Domain
25 GND Power -
26 UART1-TXD P40-1 B17 3.3V Power Domain
27 ET0-TX-CTL I/O N2 1.8V Power Domain
GPIO mode not allowed
28 UART4-RXD P2-1 A13 3.3V Power Domain
29 ET0-TXC I/O N1 1.8V Power Domain
GPIO mode not allowed
30 UART4-TXD P2-0 B13 3.3V Power Domain
31 ET0-TXD3 I/O N1 1.8V Power Domain
GPIO mode not allowed
32 UART3-RXD P0-1 B12 3.3V Power Domain
33 ET0-TXD2 I/O L2 1.8V Power Domain
GPIO mode not allowed
34 UART3-TXD P0-0 A11 3.3V Power Domain
35 ET0-TXD1 I/O M2 1.8V Power Domain
GPIO mode not allowed
36 VBAT-RTC Power - RTC 3V battery
37 ET0-TXD0 I/O M1 1.8V Power Domain
GPIO mode not allowed
38 GND Power -
39 VDD-1V8 Power 1.8V output for external devices, max. 300 mA
40 VDD-1V8 Power 1.8V output for external devices, max. 300 mA
41 VDD-5V0 Power External power supply
42 VDD-5V0 Power External power supply
43 VDD-5V0 Power External power supply
44 VDD-5V0 Power External power supply
45 VDD-5V0 Power External power supply
46 VDD-5V0 Power External power supply
47 VDD-5V0 Power External power supply
48 VDD-5V0 Power External power supply
49 VDD-5V0 Power External power supply
50 VDD-5V0 Power External power supply
51 NC Not Connected -
52 NC Not Connected -
53 VDD-3V3 Power 3.3V output for external devices, max. 300mA
54 VDD-3V3 Power - 3.3V output for external devices, max. 300mA
55 GND Power -
56 SYSLED P42-0 AG4 3.3V Power Domain
57 VPROG NC - For SoMLabs purposes only, leave unconnected
58 GND Power -
59 BOOT-RECOVERY Input BOOT input, active low during reset
61 GND Power -
62 SSI0-RXD P7-1 AH28 3.3V Power Domain
63 ET1-VDD-SEL Input Ethernet 1 (ET1) interface voltage selection:
ET1-VDD-SEL='0' -> V=1.8V
ET1-VDD-SEL='1' or left open -> V=3.3V
The line has internal pull-up.
64 SSI0-TXD P7-0 AJ28 3.3V Power Domain
65 ET1-PHY-RST P47-3 B21 3.3V Power Domain
66 SSI0-RCK P6-1 AH27 3.3V Power Domain
67 ET1-INT P47-2 A21 3.3V Power Domain
68 SSI0-BCK P6-0 AJ27 3.3V Power Domain
69 ET1-MDIO P37-1 W1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
70 GND Power -
71 ET1-MDC P37-0 W2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
72 CAN1-RX P13-0 AF23 3.3V Power Domain
73 GND Power -
74 CAN1-TX P12-1 AE23 3.3V Power Domain
75 ET1-RXC P33-1 AC1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
76 CAN0-RX P42-2 AJ3 3.3V Power Domain
77 ET1-RX-CTL P34-0 AC2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
78 CAN0-TX P42-1 AE7 3.3V Power Domain
79 ET1-RXD0 P34-1 AC3 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
80 GND Power -
81 ET1-RXD1 P35-0 AC4 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
82 I2C3-SCL-EXT P46-3 D13 I2C interface used for on-board PMIC configuration
Built-in pull-up resistor 2.2kOhm connected to 3.3V
3.3V Power Domain
83 ET1-RXD2 P35-1 AB4 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
84 I2C3-SDA-EXT P46-2 C12 I2C interface used for on-board PMIC configuration
Built-in pull-up resistor 2.2kOhm connected to 3.3V
3.3V Power Domain
85 ET1-RXD3 P36-0 AB3 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
86 I2C2-SCL P42-4 AC5 Built-in pull-up resistor 2.2kOhm connected to 3.3V
87 GND Power -
88 I2C2-SDA P42-3 AH3 Built-in pull-up resistor 2.2kOhm connected to 3.3V
89 ET1-TX-CTL P29-1 Y1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
90 P19-0 P19-0 B1 3.3V Power Domain
91 ET1-TXC P29-0 AB2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
92 P18-0 P18-0 C2 3.3V Power Domain
93 ET1-TXD3 P31-1 Y2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
94 GND Power -
95 ET1-TXD2 P31-0 AA1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
96 P18-1 P18-1 D3 3.3V Power Domain
97 ET1-TXD1 P30-1 AA2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
98 P45-0 P45-0 A8 3.3V Power Domain
99 ET1-TXD0 P30-0 AB1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
100 P45-2 P45-2 A9 3.3V Power Domain
101 GND Power -
102 P45-3 P45-3 B9 3.3V Power Domain
103 USB1-D_N Analog I/O -
104 P46-0 P46-0 B10 3.3V Power Domain
105 USB1-D_P Analog I/O -
106 P46-1 P46-1 A10 3.3V Power Domain
107 USB1-OC P8-1 AJ20 3.3V Power Domain
108 P45-1 P45-1 D12 3.3V Power Domain
109 USB1-EN P8-0 AH19 3.3V Power Domain
110 P1-1 P1-1 A12 3.3V Power Domain
111 GND Power -
112 P3-1 P3-1 B14 3.3V Power Domain
113 USB0-OC P5-0 AJ4 3.3V Power Domain
114 P1-0 P1-0 C13 3.3V Power Domain
115 USB0-EN P4-0 AJ5 3.3V Power Domain
116 GND Power -
117 USB0-ID P5-1 AH4 3.3V Power Domain
118 P3-0 P3-0 A14 3.3V Power Domain
119 USB0-D_N Analog I/O -
120 P48-2 P48-2 A22 3.3V Power Domain
121 USB0-D_P Analog I/O -
122 P4-1 P4-1 AH6 3.3V Power Domain
123 USB0-VBUS Dedicated input AH10 3.3V Power Domain
124 P7-2 P7-2 AJ19 3.3V Power Domain
125 GND Power -
126 GND Power -
127 P11-1 P11-1 AF22 3.3V Power Domain
128 P11-0 P11-0 AG22 3.3V Power Domain
129 P8-2 P8-2 AH20 3.3V Power Domain
130 P12-0 P12-0 AE22 3.3V Power Domain
131 P9-1 P9-1 AH21 3.3V Power Domain
132 P13-1 P13-1 AG23 3.3V Power Domain
133 P9-0 P9-0 AJ21 3.3V Power Domain
134 SPI1-SSL P44-3 B19 3.3V Power Domain
135 SPI0-SSL P43-3 B19 3.3V Power Domain
136 SPI1-MISO P44-2 D18 3.3V Power Domain
137 SPI0-MISO P43-2 E18 3.3V Power Domain
138 SPI1-MOSI P44-1 F17 3.3V Power Domain
139 SPI0-MOSI P43-1 D17 3.3V Power Domain
140 SPI1-CLK P44-0 A19 3.3V Power Domain
141 SPI0-CLK P43-0 B18 3.3V Power Domain
142 GND Power -
143 GND Power -
144 I2C1-SCL Dedicated I2C line C23 RIIC1_SCL
Built-in pull-up resistor 2.2kOhm connected to 3.3V
145 P14-0 P14-0 AF27 3.3V Power Domain
146 I2C1-SDA Dedicated I2C line A24 RIIC1_SDA
Built-in pull-up resistor 2.2kOhm connected to 3.3V
147 P10-1 P10-1 AH22 3.3V Power Domain
148 I2C0-SCL Dedicated I2C line B24 RIIC0_SCL
Built-in pull-up resistor 2.2kOhm connected to 3.3V
149 P10-0 P10-0 AJ22 3.3V Power Domain
150 I2C0-SDA Dedicated I2C line A25 RIIC0_SDA
Built-in pull-up resistor 2.2kOhm connected to 3.3V
151 P15-0 P15-0 AH23 3.3V Power Domain
152 GND Power -
153 P14-1 P14-1 AJ23 3.3V Power Domain
154 ADC-CH7 Dedicated analog input 12-bit ADC, max. 1.8V on input
155 P16-0 P16-0 AH24 3.3V Power Domain
156 ADC-CH6 Dedicated analog input 12-bit ADC, max. 1.8V on input
157 P15-1 P15-1 AJ24 3.3V Power Domain
158 ADC-CH5 Dedicated analog input 12-bit ADC, max. 1.8V on input
159 P17-0 P17-0 AH25 3.3V Power Domain
160 ADC-CH4 Dedicated analog input 12-bit ADC, max. 1.8V on input
160 SSI-MCLK AUDIO-CLK E12 Reference clock output (for audio codec)
161 P16-1 P16-1 AJ25 3.3V Power Domain
162 ADC-CH3 Dedicated analog input 12-bit ADC, max. 1.8V on input
163 P17-2 P17-2 AH26 3.3V Power Domain
164 ADC-CH2 Dedicated analog input 12-bit ADC, max. 1.8V on input
165 P17-1 P17-1 AJ26 3.3V Power Domain
166 ADC-CH1 Dedicated analog input 12-bit ADC, max. 1.8V on input
167 P13-2 P13-2 AG26 3.3V Power Domain
168 ADC-CH0 Dedicated analog input 12-bit ADC, max. 1.8V on input
169 GND Power -
170 GND Power -
171 DSI-DATA3_P Analog I/O AH18 MIPI-DSI line
172 CSI-DATA3_N Analog I/O AH11 MIPI-CSI line
173 DSI-DATA3_N Analog I/O AJ18 MIPI-DSI line
174 CSI-DATA3_P Analog I/O AJ11 MIPI-CSI line
175 GND Power -
176 GND Power -
177 DSI-DATA2_P Analog I/O AH15 MIPI-DSI line
178 CSI-DATA2_N Analog I/O AH14 MIPI-CSI line
179 DSI-DATA2_N Analog I/O AJ15 MIPI-DSI line
180 CSI-DATA2_P Analog I/O AJ14 MIPI-CSI line
181 GND Power -
182 GND Power -
183 DSI-CLK_P Analog I/O AG17 MIPI-DSI line
184 CSI-CLK_N Analog I/O AG12 MIPI-CSI line
185 DSI-CLK_N Analog I/O AG18 MIPI-DSI line
186 CSI-CLK_P Analog I/O AG13 MIPI-CSI line
187 GND Power -
188 GND Power -
189 DSI-DATA1_P Analog I/O AH17 MIPI-DSI line
190 CSI-DATA1_N Analog I/O AH12 MIPI-CSI line
191 DSI-DATA1_N Analog I/O AJ17 MIPI-DSI line
192 CSI-DATA1_P Analog I/O AJ12 MIPI-CSI line
193 GND Power -
194 GND Power -
195 DSI-DATA0_P Analog I/O AH16 MIPI-DSI line
196 CSI-DATA0_N Analog I/O AH13 MIPI-CSI line
197 DSI-DATA0_N Analog I/O AJ16 MIPI-DSI line
198 CSI-DATA0_P Analog I/O AJ13 MIPI-CSI line
199 GND Power -
200 GND Power -
- WLAN-ENABLE P40-2 A17 1DX radio module line (WiFi)
Not available externally
- WLAN-H-WAKE P19-1 B2 1DX radio module line (WiFi)
Not available externally
- SD1-CLK - H3 1DX radio module line (WiFi)
Not available externally
- SD1-CMD - J2 1DX radio module line (WiFi)
Not available externally
- SD1-DATA0 - H1 1DX radio module line (WiFi)
Not available externally
- SD1-DATA1 - H2 1DX radio module line (WiFi)
Not available externally
- SD1-DATA2 - K2 1DX radio module line (WiFi)
Not available externally
- SD1-DATA3 - J1 1DX radio module line (WiFi)
Not available externally
- UART2-RXD P48-1 B23 1DX radio module line (BLE)
Not available externally
- UART2-TXD P48-0 B22 1DX radio module line (BLE)
Not available externally
- UART2-RTS P48-4 B23 1DX radio module line (BLE)
Not available externally
- UART2-CTS P48-3 C22 1DX radio module line (BLE)
Not available externally
- BT-DEV-WAKE P39-0 A16 1DX radio module line (BLE)
Not available externally
- BT-HOST-WAKE P39-1 C15 1DX radio module line (BLE)
Not available externally
- BT-REG-ON P39-3 B16 1DX radio module line (BLE)
Not available externally
- JTAG-TMS AD2 JTAG interface
1.8V Power Domain
- JTAG-TCK AE1 JTAG interface
1.8V Power Domain
- JTAG-TDO AE2 JTAG interface
1.8V Power Domain
- JTAG-TDI AF1 JTAG interface
1.8V Power Domain
- JTAG-TRST AF2 JTAG interface
1.8V Power Domain
- QSPI-CLK C4 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO0 A3 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO1 B3 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO2 A4 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO3 B4 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-SS A2 Optional on-board QSPI Flash (W25Q128FWPIG)

Dimensions

SpaceSOM-8Mplus-dimensions.png
NXP Partner ST Partner Renesas Partner