VisionCB-x2L-STD: Difference between revisions
From SomLabs Wiki
No edit summary |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 8: | Line 8: | ||
|cb_switches=4/1 (user/system) | |cb_switches=4/1 (user/system) | ||
|cb_leds=4/2 (user/system) | |cb_leds=4/2 (user/system) | ||
|cb_connectors=MIPI-CSI2 camera connector (FPC30)<br> | |cb_connectors=MIPI-CSI2 camera connector (FPC30)<br>Raspberry Pi compatible (40 pins, 2.54mm)<br>ADC+GPIO (18 pins, 2.54mm)<br>Ethernet CH1 (20 pins, 2.54mm)<br>CAN (3 pins, 2.54mm)<br>RS-485 (3 pins, 2.54mm)<br>Jack Stereo (3.5mm) | ||
|cb_power_supply=External 9-12V DC | |cb_power_supply=External 9-12V DC | ||
|temp= 0 to +70°C | |temp= 0 to +70°C | ||
| Line 25: | Line 25: | ||
| | | | ||
content=  | content=  | ||
*[[ | *[[TBD|TBD]] | ||
}} | }} | ||
}} | }} | ||
Latest revision as of 12:31, 3 January 2024
| VisionCB-x2L-STD |
|
The VisionCB-x2L-STD (with SOM equipped with Renesas RZ/V2L and RZ/G2L MPUs compatible) is a carrier board for the VisionSOM-V2L and VisionSOM-G2L family of computer-on-modules which are powered by dual-core Renesas MPUs (2 x ARM Cortex-A55 + Cortex-M33). The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, CAN, RS485, audio codec, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The VisionCB-x2L-STD is equipped with a simple user interface consisting of 4 buttons and 4 LEDs. VisionCB-x2L-STD carrier board is also equipped with a large number of popular peripherals, including: RS485, CAN, 10/100/1G Ethernet, MIPI display and camera connectors, serial console port on USB vCOM.
|
Documentation
How to
| Specifications |
| SOM compatibility | VisionSOM-V2L and VisionSOM-G2L modules with dual core Renesas RZ/V2L and RZ/G2L processor (2 x Cortex-A55 + Cortex-M33) |
| SOM socket | SODIMM200 |
| Display connector | up to 4 lanes MIPI-DSI interface (FPC30) |
| Network | 1x Ethernet 10/100/1000Mbit/s, RJ45 |
| USB | USB 2.0 host x1 USB-OTG 2.0 x1 |
| Console interface | USB/UART |
| Switches | 4/1 (user/system) |
| LEDs | 4/2 (user/system) |
| Connectors | MIPI-CSI2 camera connector (FPC30) Raspberry Pi compatible (40 pins, 2.54mm) ADC+GPIO (18 pins, 2.54mm) Ethernet CH1 (20 pins, 2.54mm) CAN (3 pins, 2.54mm) RS-485 (3 pins, 2.54mm) Jack Stereo (3.5mm) |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 160mm x 100mm x 18mm |
