Personal tools

Difference between revisions of "VisionCB-x2L-STD Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(Camera MIPI-CSI interface (FPC/FFC30, 0.5mm))
(Camera MIPI-CSI interface (FPC/FFC30, 0.5mm))
Line 161: Line 161:
 
| 9 || CSI-DATA1-N || - || -
 
| 9 || CSI-DATA1-N || - || -
 
|-
 
|-
| 10 || GND || - || - || -
+
| 10 || GND || - || -  
 
|-
 
|-
 
| 11 || CSI-DATA2-P || - || -
 
| 11 || CSI-DATA2-P || - || -

Revision as of 17:19, 3 January 2024

VisionCB-x2L-STD v.1.2 Datasheet and Pinout


General description

VisionCB-x2L-STD.png

The VisionCB-x2L-STD (with SOM equipped with Renesas RZ/V2L and RZ/G2L MPUs compatible) is a carrier board for the VisionSOM-V2L and VisionSOM-G2L family of computer-on-modules which are powered by dual-core Renesas MPUs (2 x ARM Cortex-A55 + Cortex-M33). The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, CAN, RS485, audio codec, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. The VisionCB-x2L-STD is equipped with a simple user interface consisting of 4 buttons and 4 LEDs. VisionCB-x2L-STD carrier board is also equipped with a large number of popular peripherals, including: RS485, CAN, 10/100/1G Ethernet, MIPI display and camera connectors, serial console port on USB vCOM.

Applications

  • Multimedia
  • Video streaming
  • Image inspection
  • VisionAI gateway
  • Doorbell systems
  • EV chargers
  • Smart agriculture gateways
  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • IoT gateways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment

Features

  • Carrier Board compatible with the VisionSOM-G2L and VisionSOM-V2L families of modules based on dual core, heterogenous Renesas RZ/V2L and RZ/G2L application processors
  • SoM Connector: SODIMM200
  • Expansion Connectors:
    • ADC+GPIO connector 2x9 Pin Header (Male)
    • Raspberry Pi Compatible Connectors 2x20 Pin Header (Male)
    • Ethernet #1 (GMII) Connector Pin Header (Male)
  • Communication Connectors:
    • 1x Ethernet 10/100/1000Mbit/s (RJ45)
    • 1x CAN (1x3 Pin Header, Male)
    • 1x RS-485 (1x3 Pin Header, Male)
    • 1x USB Host Type A connectors
    • 1x USB OTG Micro AB connector
    • 1x Console MicroUSB B connector
  • Audio Interface:
    • Mini-jack 3.5mm (headphones + microphone)
  • Display Interface:
    • 30-pin FFC/FPC MIPI-DSI (up to 4 lanes)
  • Camera Interface:
    • 30-pin FFC/FPC MIPI-CSI2 (up to 4 lanes)
  • User Interface:
    • 4+1 Pushbuttons
    • 4+2 LEDs
  • External Power Supply 9-12V DC
  • Temperature Range: 0 to +70°C
  • Board Size: 160mm x 100mm x 21mm

Pictures of VisionCB-x2L-STD v1.2 board

Version Photo
VisionCB-x2L-STD v1.2 board only
VisionCB-x2L-STD.png
VisionCB-x2L-STD v1.2 with VisionSOM-x2L
VisionCB-x2L-STD-SOM.png

Ordering info

VisionCB-x2L-STD v1.2

Block Diagram

VisionCB-x2l-std-BLOKOWY.png

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply 9.0 12.0 15.0 V Positive pole on central connector of J200
Supply current - - 0.13 A Excluding LCD, USB and antoher external loads
LCD/Camera Power Supply
(logic)
3.25 3.3 3.35 V -
LCD/Camera Power Supply
(backlight and aux)
4.75 4.87 4.95 V -
Arduino GPIO voltage 3.3 V -

Power supply connector

The VisionCB-x2L-STD is equipped with external power source connector with pin diameter 2.5mm and hole diameter 6mm. The voltage of the external power source should be within the range 9-12 VDC.

VisionCB-x2L-STD-power-supply.png

Camera MIPI-CSI interface (FPC/FFC30, 0.5mm)

VisionCB-x2L-STD-CSI.png
Pin MPU signal Signal Description
1 GND - -
2 CSI-CLK-P - -
3 CSI-CLK-P - -
4 GND - -
5 CSI-DATA0-P - -
6 CSI-DATA0-N - -
7 GND - -
8 CSI-DATA1-P - -
9 CSI-DATA1-N - -
10 GND - -
11 CSI-DATA2-P - -
12 CSI-DATA2-N - -
13 GND - -
14 CSI-DATA3-P - -
15 CSI-DATA3-N - -
16 GND - -
17 I2C1-SCL RIIC1_SCL Camera confguration I2C interface (3.3V), pull-uped with 2.2k
18 I2C1-SDA RIIC1_SDA Camera confguration I2C interface (3.3V), pull-uped with 2.2k
19 GND - -
20 SAI3-TXFS xx Optional audio interface
21 SAI3-TXC xx Optional audio interface
22 - - -
23 GND - -
24 +3.3V - Power supply for external devices
25 +3.3V - Power supply for external devices
26 +5V - Power supply for external devices
27 +5V - Power supply for external devices
28 - - -
29 - - -
30 GND - -

Note:
1. The first pin of the MIPI-CSI connector is located in its upper part.

Display MIPI-DSI interface (FPC/FFC30, 0.5mm)

VisionCB-x2L-STD-DSI.png
Pin Signal MPU signal Description
1 GND -
2 DSI-CLK-P - -
3 DSI-CLK-P - -
4 GND - -
5 DSI-DATA0-P - -
6 DSI-DATA0-N - -
7 GND - -
8 DSI-DATA1-P - -
9 DSI-DATA1-N - -
10 GND - -
11 DSI-DATA2-P - -
12 DSI-DATA2-N - -
13 GND - -
14 DSI-DATA3-P - -
15 DSI-DATA3-N - -
16 GND - -
17 I2C1-SCL RIIC1_SCL Display confguration I2C interface (3.3V), pull-uped with 2.2k
18 I2C1-SDA RIIC1_SDA Display confguration I2C interface (3.3V), pull-uped with 2.2k
19 GND - -
20 DISP-RST P13-2 Optional display reset signal
21 TP-INT P17-1 Optional touch-panel interrupt signal
22 TP-RST P17-2 Optional touch-panel reset signal
23 GND - -
24 +3.3V Power supply for external devices
25 +3.3V Power supply for external devices
26 +5V Power supply for external devices
27 +5V Power supply for external devices
28 DSI-BL-PWM P16-0 Optional PWM backlight signal
29 DSI-BL-EN P16-1 Optional ENABLE backlight signal
30 GND - -

Note:
1. The first pin of the MIPI-DSI connector is located in its upper part.

USB Console Port and Segger J-Link debugger

VisionCB-8Mmini-console-jlink.png
MPU Port GPIO Description
CONSOLE-TXD UART4-TXD Signal connected to J304 pin 2
CONSOLE-RXD UART4-RXD Signal connected to J304 pin 3

Notes:
1. Linux console port (UART4 in MPU) uses vCOM interface provided by built-in debugger Segger J-Link.
2. vCOM can be disconnected from MPU with JP801 (jumper CONSOLE in position ON or OFF).
3. Lines TXD and RXD of UART4 are easy to monitoring thanks to using J304 gold-pins.
4. Debug JTAG interface can be disconnected from MPU with JP800 (jumper JTAG in position ON or OFF).

MicroSD card interface (J308)

VisionCB-8Mmini-sdcard.png


Connector pin SD card signal SOM pin
1 DATA2 SD1-DATA2
2 DATA3 SD1-DATA3
3 CMD SD1-CMD
4 NVCC-SDIO Voltage selected 1.8/3.3V by SD1 driver
5 CLK SD1-CLK
6 GND -
7 DATA0 SD1-DATA0
8 DATA1 SD1-DATA1
9 CARD-DETECT SD1-CD

Raspberry Pi compatible I/O header

VisionCB-8Mmini-rpiconn.png


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 +5V +5V generated by carrier board built-in DC/DC converter
3 I2C1-SDA I2C1-SDA line
4 +5V +5V generated by carrier board built-in DC/DC converter
5 I2C1-SDA I2C1-SDA line
6 GND -
7 GPIO4-IO09 Universal GPIO with 3.3V logic levels
8 UART3-TXD Default: UART3 TXD line or universal GPIO with 3.3V logic levels
9 GND -
10 UART3-RXD Default: UART3 RXD line or universal GPIO with 3.3V logic levels
11 GPIO4-IO08 Universal GPIO with 3.3V logic levels
12 SPI2-CLK Default: SPI2-CLK line or universal GPIO with 3.3V logic levels
13 - -
14 GND -
15 - -
16 SPI2-MISO Default: SPI2-MISO line or universal GPIO with 3.3V logic levels
17 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
18 SPI2-MOSI Default: SPI2-MOSI line or universal GPIO with 3.3V logic levels
19 SPI1-MOSI Default: SPI1-MOSI line or universal GPIO with 3.3V logic levels
20 GND -
21 SPI1-MISO Default: SPI1-MISO line or universal GPIO with 3.3V logic levels
22 SPI2-SS0 Default: SPI2-SS0 line or universal GPIO with 3.3V logic levels
23 SPI1-CLK Default: SPI1-CLK line or universal GPIO with 3.3V logic levels
24 SPI1-SS0 Default: SPI1-SS0 line or universal GPIO with 3.3V logic levels
25 GND -
26 GPIO-IO22 Universal GPIO with 3.3V logic levels
27 - -
28 - -
29 GPIO4-IO12 Universal GPIO with 3.3V logic levels
30 GND -
31 GPIO4-IO13 Universal GPIO with 3.3V logic levels
32 GPIO4-IO20 Universal GPIO with 3.3V logic levels
33 GPIO4-IO14 Universal GPIO with 3.3V logic levels
34 GND -
35 GPIO4-IO14 Universal GPIO with 3.3V logic levels
36 GPIO4-IO19 Universal GPIO with 3.3V logic levels
37 GPIO4-IO16 Universal GPIO with 3.3V logic levels
38 GPIO4-IO18 Universal GPIO with 3.3V logic levels
39 GND -
40 GPIO4-IO17 Universal GPIO with 3.3V logic levels

Arduino Uno compatible I/O header

VisionCB-8Mmini-arduino.png


Pin Arduino name Default function name Description
Power connector J700, red connector
1 - - -
2 IOREF VDD-ARDUINO-IO Selected +3.3V or +5V (with V-ARD jumper).
3 RESET POR-B External reset input, active L.
4 3.3V VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current).
5 5V VCC-5V0 +5V generated by carrier board built-in DC/DC converter.
6 GND GND -
7 GND GND -
8 VIN VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current).
Analog inputs connector J702, blue connector
1 AIN0 - Not internally connected.
2 AIN1 - Not internally connected.
3 AIN2 - Not internally connected.
4 AIN3 - Not internally connected.
5 - - Not internally connected.
6 - - Not internally connected.
Digital I/Os connector J704, yellow connector
1 DIO0 UART3-RXD Default: UART3-RXD line or universal GPIO with 3.3/5V logic levels.
2 DIO1 UART3-TXD Default: UART3-TXD line or universal GPIO with 3.3/5V logic levels.
3 DIO2 GPIO4-IO15 Universal GPIO with 3.3/5V logic levels.
4 DIO3 GPIO4-IO14 Universal GPIO with 3.3/5V logic levels.
5 DIO4 GPIO4-IO13 Universal GPIO with 3.3/5V logic levels.
6 DIO5 GPIO4-IO12 Universal GPIO with 3.3/5V logic levels.
7 DIO6 GPIO4-IO11 Universal GPIO with 3.3/5V logic levels.
8 DIO7 GPIO4-IO10 Universal GPIO with 3.3/5V logic levels.
Digital I/Os connector J703, yellow connector
1 DIO8 GPIO4-IO08 Universal GPIO with 3.3/5V logic levels.
2 DIO9 GPIO4-IO09 Universal GPIO with 3.3/5V logic levels.
3 DIO10 SPI1-SS0 Default: SPI1-SS0 line or universal GPIO with 3.3/5V logic levels.
4 DIO11 SPI1-MOSI Default: SPI1-MOSI line or universal GPIO with 3.3/5V logic levels.
5 DIO12 SPI1-MISO Default: SPI1-MISO line or universal GPIO with 3.3/5V logic levels.
6 DIO13 SPI1-CLK Default: SPI1-CLK line or universal GPIO with 3.3/5V logic levels.
7 GND GND -
8 AREF VDD-ARDUINO-IO +3.3V or +5V selected with V-ARD jumper.
9 DIO14 I2C1-SCL Default: I2C1-SCL line or universal GPIO with 3.3/5V logic levels.
10 DIO15 I2C1-SDA Default: I2C1-SDA line or universal GPIO with 3.3/5V logic levels.

Notes:
1. I/O logic levels are selected 3.3/5V with V-ARD jumper.
2. RESET line is 3.3 and 5V compatible.

Serial Communication/GPIO header (J305)

VisionCB-8Mmini-serialcommGPIO.png


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 GPIO5-IO23 Universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as touch-panel interrupt line (with 47k pull-up)
3 UART2-CTS By default: UART2-CTS or universal GPIO with 3.3V logic levels
4 SAI3-TXFS By default: SAI3-TXFS or universal GPIO with 3.3V logic levels
Connected to MIPI-CSI (J302)
5 UART2-RTS By default: UART2-RTS or universal GPIO with 3.3V logic levels
6 SAI3-TXC By default: SAI3-TXC or universal GPIO with 3.3V logic levels
Connected to MIPI-CSI (J302)
7 UART2-RXD By default: UART2-RXD or universal GPIO with 3.3V logic levels
8 SAI3-TXD By default: SAI3-TXD or universal GPIO with 3.3V logic levels
9 UART2-TXD By default: UART2-TXD or universal GPIO with 3.3V logic levels
10 SAI3-RXFS By default: SAI3-RXFS or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as display module reset signal
11 I2C2-SCL By default: I2C2-SCL or universal GPIO with 3.3V logic levels
Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
12 SAI3-MCLK By default: SAI3-MCLK or universal GPIO with 3.3V logic levels
13 I2C2-SDA By default: I2C2-SDA or universal GPIO with 3.3V logic levels
Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
14 SPDIF-TX By default: SPDIC-TX or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as touch-panel reset signal
15 I2C3-SCL By default: I2C3-SCL or universal GPIO with 3.3V logic levels
16 SPDIF-RX By default: I2C3-SCL or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as display module PWM backlight control
17 I2C3-SDA By default: I2C3-SDA or universal GPIO with 3.3V logic levels
18 SPDIF-CLK By default: SPDIF-CLK or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as display module on/off signal
19 GND -
20 GND -

User Interface (switches and LEDs)

VisionCB-8Mmini-userinterface.png


User switches

Switch GPIO Description
S305 (black, most on the left) GPIO4-IO03 47k pull-up
S304 GPIO4-IO02 47k pull-up
S303 GPIO4-IO01 47k pull-up
S302 (black, most on the right) GPIO4-IO00 47k pull-up


System switches

Switch Signal name Description
S301 (left, red) Reset -
S300 (right, red) BOOT-RECOVERY -


User LEDs

LED GPIO Description
D303 (most on the left) GPIO4-IO04 User LED1, buffered with inverter
D302 GPIO4-IO05 User LED2, buffered with inverter
D301 GPIO4-IO06 User LED3, buffered with inverter
D300 (most on the right) GPIO4-IO07 User LED4, buffered with inverter


System LEDs

LED GPIO Description
D304 SYS-LED System function monitoring
D305 - Power LED (3.3V)


Dimensions

VisionCB-x2L-STD-dimensions.png
NXP Partner ST Partner Renesas Partner