Difference between revisions of "VisionSOM-V2L Datasheet and Pinout"
From SomLabs Wiki
(→Pictures of SOM versions) |
(→SoM pinout) |
||
(29 intermediate revisions by the same user not shown) | |||
Line 57: | Line 57: | ||
{| class="frame-green" | {| class="frame-green" | ||
|- | |- | ||
− | | WiFi/BT module is available for all memory | + | | WiFi/BT module is available for all memory configurations. |
|} | |} | ||
Line 77: | Line 77: | ||
"name" : "SOM Name", | "name" : "SOM Name", | ||
"type" : "selector", | "type" : "selector", | ||
− | "symbol" : " | + | "symbol" : "2", |
"values" : [ | "values" : [ | ||
− | {"value" : " | + | {"value" : "2", |
− | "description" : "High Performance | + | "description" : "High Performance VisionSOM SODIM200 module"} |
] | ] | ||
}, | }, | ||
Line 86: | Line 86: | ||
"name" : "CPU Family", | "name" : "CPU Family", | ||
"type" : "selector", | "type" : "selector", | ||
− | "symbol" : " | + | "symbol" : "2", |
"values" : [ | "values" : [ | ||
− | {"value" : " | + | {"value" : "2", |
− | "description" : " | + | "description" : "Renesas RZ/V2L family"} |
] | ] | ||
}, | }, | ||
Line 97: | Line 97: | ||
"symbol" : "CpuType", | "symbol" : "CpuType", | ||
"values" : [ | "values" : [ | ||
− | {"value" : " | + | {"value" : "RV2LDC", "description" : "RZ/V2L dual Cortex-A55 + Cortex-M33 + DRP-AI"} |
] | ] | ||
}, | }, | ||
Line 109: | Line 109: | ||
"symbol" : "Clock", | "symbol" : "Clock", | ||
"values" : [ | "values" : [ | ||
− | {"value" : " | + | {"value" : "1200C", "description" : "1.2GHz"} |
− | |||
] | ] | ||
}, | }, | ||
Line 118: | Line 117: | ||
}, | }, | ||
{ | { | ||
− | "name" : " | + | "name" : "DDR4 RAM Size", |
"type" : "selector", | "type" : "selector", | ||
"symbol" : "RamSize", | "symbol" : "RamSize", | ||
"values" : [ | "values" : [ | ||
− | {"value" : "01GR", "description" : "1GB (1024MB | + | {"value" : "01GR", "description" : "1GB (1024MB)"} |
− | |||
− | |||
] | ] | ||
}, | }, | ||
Line 152: | Line 149: | ||
"values" : [ | "values" : [ | ||
{"value" : "0SF", "description" : "No Special Features"}, | {"value" : "0SF", "description" : "No Special Features"}, | ||
− | {"value" : "1WB", "description" : "Built-in | + | {"value" : "1WB", "description" : "Built-in 2.4GHz Wi-Fi and Bluetooth v5.1"} |
] | ] | ||
}, | }, | ||
Line 164: | Line 161: | ||
"symbol" : "TEMP", | "symbol" : "TEMP", | ||
"values" : [ | "values" : [ | ||
− | |||
{"value" : "E", "description" : "Extended: -25 to +70 C"}, | {"value" : "E", "description" : "Extended: -25 to +70 C"}, | ||
{"value" : "I", "description" : "Industrial: -40 to +85 C"} | {"value" : "I", "description" : "Industrial: -40 to +85 C"} | ||
Line 174: | Line 170: | ||
== Block Diagram == | == Block Diagram == | ||
− | [[File: | + | [[File:VisionSOM-V2L-blokowy.png|250px|center]] |
== Operating ranges == | == Operating ranges == | ||
Line 186: | Line 182: | ||
| <center>5.0</center> | | <center>5.0</center> | ||
| <center>V</center> | | <center>V</center> | ||
− | | Connected to VDD | + | | Connected to VDD-5V0 SODIM200 pins |
|- | |- | ||
| Max. input GPIO voltage | | Max. input GPIO voltage | ||
− | | <center> | + | | <center>3.3</center> |
| <center>V</center> | | <center>V</center> | ||
− | | - | + | | In 3.3V power domain |
+ | |- | ||
+ | | Max. input GPIO voltage | ||
+ | | <center>1.8</center> | ||
+ | | <center>V</center> | ||
+ | | In 1.8V power domain | ||
|- | |- | ||
− | | rowspan="3" | Environment temperature | + | | rowspan="3" | Environment temperature |
| <center>-40…+85</center> | | <center>-40…+85</center> | ||
| rowspan="3" | <sup>o</sup>C | | rowspan="3" | <sup>o</sup>C | ||
| Industrial range w/o WiFi module | | Industrial range w/o WiFi module | ||
|- | |- | ||
− | | <center>- | + | | <center>-25…+70</center> |
| Industrial range with WiFi module | | Industrial range with WiFi module | ||
|- | |- | ||
Line 204: | Line 205: | ||
| Consumer range | | Consumer range | ||
|} | |} | ||
− | |||
− | |||
− | |||
== Electrical parameters == | == Electrical parameters == | ||
Line 219: | Line 217: | ||
| Max. | | Max. | ||
|- | |- | ||
− | | VDD-5V || Supply Voltage (Input) || 4.0 || 5.0 || 5. | + | | VDD-5V || Supply Voltage (Input) || 4.0 || 5.0 || 5.5 || V |
|- | |- | ||
− | | | + | | VDD-1V8 || Output power supply for external 1.8V accesories || - || - || 0.3<sup>1</sup> || A |
|- | |- | ||
− | + | | VDD-3V3 || Output power supply for external 3.3V accesories || - || - || 0.3<sup>2</sup> || A | |
− | |||
− | | VDD-3V3 || Output power supply for external 3.3V accesories || - || - || 0.3<sup> | ||
|- | |- | ||
| VGPIO @1V8 || GPIO Input Voltage || 0 || - || 2.05 || V | | VGPIO @1V8 || GPIO Input Voltage || 0 || - || 2.05 || V | ||
Line 231: | Line 227: | ||
| VGPIO @3V3 || GPIO Input Voltage || 0 || - || 3.6<sup>2</sup> || V | | VGPIO @3V3 || GPIO Input Voltage || 0 || - || 3.6<sup>2</sup> || V | ||
|- | |- | ||
− | | V<sub> | + | | V<sub>USB0-VBUS</sub> || USB VBUS Input Voltage || 0 || - || 5.25<sup>3</sup> || V |
+ | |- | ||
+ | | V<sub>ETH0</sub> || I/O voltage for Ethernet 0 || 0 || - || 1.8 || V | ||
+ | |- | ||
+ | | V<sub>ETH1</sub> || I/O voltage for Ethernet 1 || 0 || - || 1.8 or 3.3<sup>4</sup> || V | ||
+ | |- | ||
+ | | V<sub>JTAG</sub> || I/O voltage for Ethernet 1 || 0 || - || 1.8<sup>5</sup> || V | ||
+ | |- | ||
+ | | V<sub>ADC-IN</sub> || Input voltage for ADC-CHx<sup>6</sup> || 0 || - || 1.8 || V | ||
|} | |} | ||
Notes:<br /> | Notes:<br /> | ||
+ | 1. Total current on both VDD-1V8 outputs.<br /> | ||
1. Total current on both VDD-3V3 outputs.<br /> | 1. Total current on both VDD-3V3 outputs.<br /> | ||
− | + | 3. Input current is limited by 1+1,8kOhm resistors (voltage divider) connected in series.<br /> | |
− | + | 4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-up'ed.).<br /> | |
+ | 5. JTAG/SWD interface lines are 1.8V compatible.<br /> | ||
+ | 6. "x" means 0...7.<br /> | ||
== SoM pinout == | == SoM pinout == | ||
Important notes: | Important notes: | ||
− | <br />1. Detail pin configurations description you can find, edit and arrange in dedicated | + | <br />1. Detail pin configurations description you can find, edit and arrange in dedicated SCFG file (with free "Smart Configurator" tool). |
− | <br />2. | + | <br />2. On-board eMMC memory is connected to SDIO0 interface. |
− | <br />3. | + | <br />3. Optional on-board QSPI Flash memory is connected to QSPI0 interface. |
− | <br />4. | + | <br />4. SDIO1 interface is used to communication with Murata 1DX radio module. |
− | <br />5. | + | <br />5. UART2 is used to communication with BT-BLE interatted with Murata 1DX radio module. |
− | <br />6. | + | <br />6. I2C3 is used to communication with on-board PMIC. |
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! | + | ! SOM pin number |
− | ! | + | ! Default function |
− | ! | + | ! GPIO |
− | ! | + | ! BGA456 ball |
− | ! | + | ! Notes |
|- | |- | ||
− | | | + | | 1 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 2 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 3 |
− | | | + | | ET0-PHY-RST |
− | | | + | | P47-1 |
− | | | + | | A20 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 4 |
− | | | + | | PWR-GOOD |
− | | | + | | Output |
− | | | + | | |
− | | | + | | PMIC power-good signalling for external devices |
|- | |- | ||
− | | | + | | 5 |
− | | | + | | ET0-INT |
− | | | + | | P47-0 |
− | | | + | | B20 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 6 |
− | | | + | | PWR-ON |
− | | <br /> | + | | Input |
− | + | | | |
− | + | | PMIC PWRON input (on-off function)<br /> Internal pull-down<br /> Connect to GND if not used<br /> Connect to VDD-3V3 with external pull-up resistor (4.7kOhm) and pushbutton to GND if used | |
|- | |- | ||
− | | | + | | 7 |
− | | | + | | ET0-MDIO |
− | | | + | | I/O |
− | | | + | | U1 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 8 |
− | | | + | | PWR-FAIL |
− | | <br /> | + | | Input |
− | + | | | |
− | + | | PMIC enable-input:<br /> PWR-FAIL='0' -> SOM power supply is off<br /> PWR-FAIL='1' or left open -> SOM power supply is on<br /> Can bue used as cold-reset input (active low) | |
|- | |- | ||
− | | | + | | 9 |
− | | | + | | ET0-MDC |
− | | | + | | I/O |
− | | | + | | U2 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 10 |
− | | | + | | RESET-OUT |
− | | | + | | Output |
− | | | + | | |
− | | | + | | RESET output for external peripherals |
|- | |- | ||
− | | | + | | 11 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 12 |
− | | | + | | RESET-IN |
− | | | + | | Input |
− | | | + | | |
− | | | + | | MPU reset input, active low |
|- | |- | ||
− | | | + | | 13 |
− | | | + | | ET0-RXC |
− | | | + | | I/O |
− | | | + | | P2 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 14 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 15 |
− | | | + | | ET0-RX-CTL |
− | | | + | | I/O |
− | | | + | | P1 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 16 |
− | | | + | | UART0-RXD |
− | | | + | | P38-1 |
− | | | + | | B15 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 17 |
− | | | + | | ET0-RXD0 |
− | | | + | | I/O |
− | | | + | | R2 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 18 |
− | | | + | | UART0-TXD |
− | | | + | | P38-0 |
− | | | + | | A15 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 19 |
− | | | + | | ET0-RXD1 |
− | | | + | | I/O |
− | | | + | | R1 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 20 |
− | | | + | | UART1-CTS |
− | | | + | | P41-0 |
− | | | + | | E17 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 21 |
− | | | + | | ET0-RXD2 |
− | | | + | | I/O |
− | | | + | | T2 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 22 |
− | | | + | | UART1-RTS |
− | | | + | | P41-1 |
− | | | + | | A18 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 23 |
− | | | + | | ET0-RXD3 |
− | | | + | | I/O |
− | | | + | | T1 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 24 |
− | | | + | | UART1-RXD |
− | | | + | | P40-0 |
− | | | + | | C17 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 25 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 26 |
− | | | + | | UART1-TXD |
− | | | + | | P40-1 |
− | | | + | | B17 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 27 |
− | | | + | | ET0-TX-CTL |
− | | | + | | I/O |
− | | | + | | N2 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 28 |
− | | | + | | UART4-RXD |
− | | | + | | P2-1 |
− | | | + | | A13 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 29 |
− | | | + | | ET0-TXC |
− | | | + | | I/O |
− | | | + | | N1 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 30 |
− | | | + | | UART4-TXD |
− | | | + | | P2-0 |
− | | | + | | B13 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 31 |
− | | | + | | ET0-TXD3 |
− | | | + | | I/O |
− | | | + | | N1 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 32 |
− | | | + | | UART3-RXD |
− | | | + | | P0-1 |
− | | | + | | B12 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 33 |
− | | | + | | ET0-TXD2 |
− | | | + | | I/O |
− | | | + | | L2 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 34 |
− | | | + | | UART3-TXD |
− | | | + | | P0-0 |
− | | | + | | A11 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 35 |
− | | | + | | ET0-TXD1 |
− | | | + | | I/O |
− | | | + | | M2 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 36 |
− | | | + | | VBAT-RTC |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | RTC 3V battery |
|- | |- | ||
− | | | + | | 37 |
− | | | + | | ET0-TXD0 |
− | | | + | | I/O |
− | | | + | | M1 |
− | | <br /> | + | | 1.8V Power Domain<br /> GPIO mode not allowed |
|- | |- | ||
− | | | + | | 38 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 39 |
− | | | + | | VDD-1V8 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | 1.8V output for external devices, max. 300 mA |
|- | |- | ||
− | | | + | | 40 |
− | | | + | | VDD-1V8 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | 1.8V output for external devices, max. 300 mA |
|- | |- | ||
− | | | + | | 41 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 42 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 43 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 44 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 45 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 46 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 47 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 48 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 49 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 50 |
− | | | + | | VDD-5V0 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | External power supply |
|- | |- | ||
− | | | + | | 51 |
− | | | + | | NC |
− | | | + | | Not Connected |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 52 |
− | | | + | | NC |
− | | | + | | Not Connected |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 53 |
− | | | + | | VDD-3V3 |
− | | | + | | Power |
− | | | + | | |
− | | | + | | 3.3V output for external devices, max. 300mA |
|- | |- | ||
− | | | + | | 54 |
− | | | + | | VDD-3V3 |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | 3.3V output for external devices, max. 300mA |
|- | |- | ||
− | | | + | | 55 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 56 |
− | | | + | | SYSLED |
− | | | + | | P42-0 |
− | | | + | | AG4 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 57 |
− | | | + | | VPROG |
− | | | + | | NC |
− | | | + | | - |
− | | | + | | For SoMLabs purposes only, leave unconnected |
|- | |- | ||
− | | | + | | 58 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 59 |
− | | | + | | BOOT-RECOVERY |
− | | | + | | Input |
− | | | + | | colspan="2" | BOOT input, active low during reset |
− | | | ||
|- | |- | ||
− | | | + | | 60 |
− | | | + | | SSI-MCLK |
− | | | + | | AUDIO_CLK1 |
− | | | + | | E12 |
− | | | + | | - |
+ | |||
|- | |- | ||
− | | | + | | 61 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 62 |
− | | | + | | SSI0-RXD |
− | | | + | | P7-1 |
− | | | + | | AH28 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 63 |
− | | | + | | ET1-VDD-SEL |
− | | <br />- | + | | Input |
− | + | | | |
− | + | | Ethernet 1 (ET1) interface voltage selection:<br /> ET1-VDD-SEL='0' -> V=1.8V<br /> ET1-VDD-SEL='1' or left open -> V=3.3V<br /> The line has internal pull-up. | |
|- | |- | ||
− | | | + | | 64 |
− | | | + | | SSI0-TXD |
− | | | + | | P7-0 |
− | | | + | | AJ28 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 65 |
− | | | + | | ET1-PHY-RST |
− | | | + | | P47-3 |
− | | | + | | B21 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 66 |
− | | | + | | SSI0-RCK |
− | | | + | | P6-1 |
− | | | + | | AH27 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 67 |
− | | | + | | ET1-INT |
− | | | + | | P47-2 |
− | | | + | | A21 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 68 |
− | | | + | | SSI0-BCK |
− | | | + | | P6-0 |
− | | | + | | AJ27 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 69 |
− | | | + | | ET1-MDIO |
− | | | + | | P37-1 |
− | | | + | | W1 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 70 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 71 |
− | | | + | | ET1-MDC |
− | | | + | | P37-0 |
− | | | + | | W2 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 72 |
− | | | + | | CAN1-RX |
− | | | + | | P13-0 |
− | | | + | | AF23 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 73 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 74 |
− | | | + | | CAN1-TX |
− | | | + | | P12-1 |
− | | | + | | AE23 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 75 |
− | | | + | | ET1-RXC |
− | | | + | | P33-1 |
− | | | + | | AC1 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 76 |
− | | | + | | CAN0-RX |
− | | | + | | P42-2 |
− | | | + | | AJ3 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 77 |
− | | | + | | ET1-RX-CTL |
− | | | + | | P34-0 |
− | | | + | | AC2 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 78 |
− | | | + | | CAN0-TX |
− | | | + | | P42-1 |
− | | | + | | AE7 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 79 |
− | | | + | | ET1-RXD0 |
− | | | + | | P34-1 |
− | | | + | | AC3 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 80 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 81 |
− | | | + | | ET1-RXD1 |
− | | | + | | P35-0 |
− | | | + | | AC4 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 82 |
− | | | + | | I2C3-SCL-EXT |
− | | | + | | P46-3 |
− | | <br />- | + | | D13 |
− | + | | I2C interface used for on-board PMIC configuration<br /> Built-in pull-up resistor 2.2kOhm connected to 3.3V<br /> 3.3V Power Domain | |
|- | |- | ||
− | | | + | | 83 |
− | | | + | | ET1-RXD2 |
− | | | + | | P35-1 |
− | | | + | | AB4 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 84 |
− | | | + | | I2C3-SDA-EXT |
− | | | + | | P46-2 |
− | | <br /> | + | | C12 |
− | + | | I2C interface used for on-board PMIC configuration<br /> Built-in pull-up resistor 2.2kOhm connected to 3.3V<br /> 3.3V Power Domain | |
|- | |- | ||
− | | | + | | 85 |
− | | | + | | ET1-RXD3 |
− | | | + | | P36-0 |
− | | | + | | AB3 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 86 |
− | | | + | | I2C2-SCL |
− | | | + | | P42-4 |
− | | | + | | AC5 |
− | | | + | | Built-in pull-up resistor 2.2kOhm connected to 3.3V |
|- | |- | ||
− | | | + | | 87 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 88 |
− | | | + | | I2C2-SDA |
− | | | + | | P42-3 |
− | | | + | | AH3 |
− | | | + | | Built-in pull-up resistor 2.2kOhm connected to 3.3V |
|- | |- | ||
− | | | + | | 89 |
− | | | + | | ET1-TX-CTL |
− | | | + | | P29-1 |
− | | | + | | Y1 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 90 |
− | | | + | | P19-0 |
− | | | + | | P19-0 |
− | | | + | | B1 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 91 |
− | | | + | | ET1-TXC |
− | | | + | | P29-0 |
− | | | + | | AB2 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 92 |
− | | | + | | P18-0 |
− | | | + | | P18-0 |
− | | | + | | C2 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 93 |
− | | | + | | ET1-TXD3 |
− | | | + | | P31-1 |
− | | | + | | Y2 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 94 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 95 |
− | | | + | | ET1-TXD2 |
− | | | + | | P31-0 |
− | | | + | | AA1 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 96 |
− | | | + | | P18-1 |
− | | | + | | P18-1 |
− | | | + | | D3 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 97 |
− | | | + | | ET1-TXD1 |
− | | | + | | P30-1 |
− | | | + | | AA2 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 98 |
− | | | + | | P45-0 |
− | | | + | | P45-0 |
− | | | + | | A8 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 99 |
− | | | + | | ET1-TXD0 |
− | | | + | | P30-0 |
− | | | + | | AB1 |
− | | <br /> | + | | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL<br /> GPIO allowed only for 3.3V. |
|- | |- | ||
− | | | + | | 100 |
− | | | + | | P45-2 |
− | | | + | | P45-2 |
− | | | + | | A9 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 101 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 102 |
− | | | + | | P45-3 |
− | | | + | | P45-3 |
− | | | + | | B9 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 103 |
− | | | + | | USB1-D_N |
− | | | + | | Analog I/O |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 104 |
− | | | + | | P46-0 |
− | | | + | | P46-0 |
− | | | + | | B10 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 105 |
− | | | + | | USB1-D_P |
− | | | + | | Analog I/O |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 106 |
− | | | + | | P46-1 |
− | | | + | | P46-1 |
− | | | + | | A10 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 107 |
− | | | + | | USB1-OC |
− | | | + | | P8-1 |
− | | | + | | AJ20 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 108 |
− | | | + | | P45-1 |
− | | | + | | P45-1 |
− | | | + | | D12 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 109 |
− | | | + | | USB1-EN |
− | | | + | | P8-0 |
− | | | + | | AH19 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 110 |
− | | | + | | P1-1 |
− | | | + | | P1-1 |
− | | | + | | A12 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 111 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 112 |
− | | | + | | P3-1 |
− | | | + | | P3-1 |
− | | | + | | B14 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 113 |
− | | | + | | USB0-OC |
− | | | + | | P5-0 |
− | | | + | | AJ4 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 114 |
− | | | + | | P1-0 |
− | | | + | | P1-0 |
− | | | + | | C13 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 115 |
− | | | + | | USB0-EN |
− | | | + | | P4-0 |
− | | | + | | AJ5 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 116 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 117 |
− | | | + | | USB0-ID |
− | | | + | | P5-1 |
− | | | + | | AH4 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 118 |
− | | | + | | P3-0 |
− | | | + | | P3-0 |
− | | | + | | A14 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 119 |
− | | | + | | USB0-D_N |
− | | | + | | Analog I/O |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 120 |
− | | | + | | P48-2 |
− | | | + | | P48-2 |
− | | | + | | A22 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 121 |
− | | | + | | USB0-D_P |
− | | | + | | Analog I/O |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 122 |
− | | | + | | P4-1 |
− | | | + | | P4-1 |
− | | | + | | AH6 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 123 |
− | | | + | | USB0-VBUS |
− | | | + | | Dedicated input |
− | | | + | | AH10 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 124 |
− | | | + | | P7-2 |
− | | | + | | P7-2 |
− | | | + | | AJ19 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 125 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 126 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 127 |
− | | | + | | P11-1 |
− | | | + | | P11-1 |
− | | | + | | AF22 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 128 |
− | | | + | | P11-0 |
− | | | + | | P11-0 |
− | | | + | | AG22 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 129 |
− | | | + | | P8-2 |
− | | | + | | P8-2 |
− | | | + | | AH20 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 130 |
− | | | + | | P12-0 |
− | | | + | | P12-0 |
− | | | + | | AE22 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 131 |
− | | | + | | P9-1 |
− | | | + | | P9-1 |
− | | | + | | AH21 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 132 |
− | | | + | | P13-1 |
− | | | + | | P13-1 |
− | | | + | | AG23 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 133 |
− | | | + | | P9-0 |
− | | | + | | P9-0 |
− | | | + | | AJ21 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 134 |
− | | | + | | SPI1-SSL |
− | | | + | | P44-3 |
− | | | + | | B19 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 135 |
− | | | + | | SPI0-SSL |
− | | | + | | P43-3 |
− | | | + | | B19 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 136 |
− | | | + | | SPI1-MISO |
− | | | + | | P44-2 |
− | | | + | | D18 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 137 |
− | | | + | | SPI0-MISO |
− | | | + | | P43-2 |
− | | | + | | E18 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 138 |
− | | | + | | SPI1-MOSI |
− | | | + | | P44-1 |
− | | | + | | F17 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 139 |
− | | | + | | SPI0-MOSI |
− | | | + | | P43-1 |
− | | | + | | D17 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 140 |
− | | | + | | SPI1-CLK |
− | | | + | | P44-0 |
− | | | + | | A19 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 141 |
− | | | + | | SPI0-CLK |
− | | | + | | P43-0 |
− | | | + | | B18 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 142 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 143 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 144 |
− | | | + | | I2C1-SCL |
− | | | + | | Dedicated I2C line |
− | | | + | | C23 |
− | | <br />3.3V | + | | RIIC1_SCL<br /> Built-in pull-up resistor 2.2kOhm connected to 3.3V |
|- | |- | ||
− | | | + | | 145 |
− | | | + | | P14-0 |
− | | | + | | P14-0 |
− | | | + | | AF27 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 146 |
− | | | + | | I2C1-SDA |
− | | | + | | Dedicated I2C line |
− | | | + | | A24 |
− | | <br />3.3V | + | | RIIC1_SDA<br /> Built-in pull-up resistor 2.2kOhm connected to 3.3V |
|- | |- | ||
− | | | + | | 147 |
− | | | + | | P10-1 |
− | | | + | | P10-1 |
− | | | + | | AH22 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 148 |
− | | | + | | I2C0-SCL |
− | | | + | | Dedicated I2C line |
− | | | + | | B24 |
− | | <br />3.3V | + | | RIIC0_SCL<br /> Built-in pull-up resistor 2.2kOhm connected to 3.3V |
|- | |- | ||
− | | | + | | 149 |
− | | | + | | P10-0 |
− | | | + | | P10-0 |
− | | | + | | AJ22 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 150 |
− | | | + | | I2C0-SDA |
− | | | + | | Dedicated I2C line |
− | | | + | | A25 |
− | | <br />3.3V | + | | RIIC0_SDA<br /> Built-in pull-up resistor 2.2kOhm connected to 3.3V |
|- | |- | ||
− | | | + | | 151 |
− | | | + | | P15-0 |
− | | | + | | P15-0 |
− | | | + | | AH23 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 152 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 153 |
− | | | + | | P14-1 |
− | | | + | | P14-1 |
− | | | + | | AJ23 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 154 |
− | | | + | | ADC-CH7 |
− | | | + | | colspan="2" | Dedicated analog input |
− | | | + | | 12-bit ADC, max. 1.8V on input |
− | | | ||
|- | |- | ||
− | | | + | | 155 |
− | | | + | | P16-0 |
− | | | + | | P16-0 |
− | | | + | | AH24 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 156 |
− | | | + | | ADC-CH6 |
− | | | + | | colspan="2" | Dedicated analog input |
− | | | + | | 12-bit ADC, max. 1.8V on input |
− | | | ||
|- | |- | ||
− | | | + | | 157 |
− | | | + | | P15-1 |
− | | | + | | P15-1 |
− | | | + | | AJ24 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 158 |
− | | | + | | ADC-CH5 |
− | | | + | | colspan="2" | Dedicated analog input |
− | | | + | | 12-bit ADC, max. 1.8V on input |
− | | | ||
|- | |- | ||
− | | | + | | 159 |
− | | | + | | P17-0 |
− | | | + | | P17-0 |
− | | | + | | AH25 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 160 |
− | | | + | | ADC-CH4 |
− | | | + | | colspan="2" | Dedicated analog input |
− | | | + | | 12-bit ADC, max. 1.8V on input |
− | | | ||
|- | |- | ||
− | | | + | | 160 |
− | | | + | | SSI-MCLK |
− | | | + | | AUDIO-CLK |
− | | | + | | E12 |
− | | | + | | Reference clock output (for audio codec) |
|- | |- | ||
− | | | + | | 161 |
− | | | + | | P16-1 |
− | | | + | | P16-1 |
− | | | + | | AJ25 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 162 |
− | | | + | | ADC-CH3 |
− | | | + | | colspan="2" | Dedicated analog input |
− | | | + | | 12-bit ADC, max. 1.8V on input |
− | | | ||
|- | |- | ||
− | | | + | | 163 |
− | | | + | | P17-2 |
− | | | + | | P17-2 |
− | | | + | | AH26 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 164 |
− | | | + | | ADC-CH2 |
− | | | + | | colspan="2" | Dedicated analog input |
− | | | + | | 12-bit ADC, max. 1.8V on input |
− | | | ||
|- | |- | ||
− | | | + | | 165 |
− | | | + | | P17-1 |
− | | | + | | P17-1 |
− | | | + | | AJ26 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 166 |
− | | | + | | ADC-CH1 |
− | | | + | | colspan="2" | Dedicated analog input |
− | | | + | | 12-bit ADC, max. 1.8V on input |
− | | | ||
|- | |- | ||
− | | | + | | 167 |
− | | | + | | P13-2 |
− | | | + | | P13-2 |
− | | | + | | AG26 |
− | | | + | | 3.3V Power Domain |
|- | |- | ||
− | | | + | | 168 |
− | | | + | | ADC-CH0 |
− | | | + | | colspan="2" | Dedicated analog input |
− | | | + | | 12-bit ADC, max. 1.8V on input |
− | | | ||
|- | |- | ||
− | | | + | | 169 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 170 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 171 |
− | | | + | | DSI-DATA3_P |
− | | | + | | Analog I/O |
− | | | + | | AH18 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 172 |
− | | | + | | CSI-DATA3_N |
− | | | + | | Analog I/O |
− | | | + | | AH11 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 173 |
− | | | + | | DSI-DATA3_N |
− | | | + | | Analog I/O |
− | | | + | | AJ18 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 174 |
− | | | + | | CSI-DATA3_P |
− | | | + | | Analog I/O |
− | | | + | | AJ11 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 175 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 176 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 177 |
− | | | + | | DSI-DATA2_P |
− | | | + | | Analog I/O |
− | | | + | | AH15 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 178 |
− | | | + | | CSI-DATA2_N |
− | | | + | | Analog I/O |
− | | | + | | AH14 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 179 |
− | | | + | | DSI-DATA2_N |
− | | | + | | Analog I/O |
− | | | + | | AJ15 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 180 |
− | | | + | | CSI-DATA2_P |
− | | | + | | Analog I/O |
− | | | + | | AJ14 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 181 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 182 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 183 |
− | | | + | | DSI-CLK_P |
− | | | + | | Analog I/O |
− | | | + | | AG17 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 184 |
− | | | + | | CSI-CLK_N |
− | | | + | | Analog I/O |
− | | | + | | AG12 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 185 |
− | | | + | | DSI-CLK_N |
− | | | + | | Analog I/O |
− | | | + | | AG18 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 186 |
− | | | + | | CSI-CLK_P |
− | | | + | | Analog I/O |
− | | | + | | AG13 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 187 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 188 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 189 |
− | | | + | | DSI-DATA1_P |
− | | | + | | Analog I/O |
− | | | + | | AH17 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 190 |
− | | | + | | CSI-DATA1_N |
− | | | + | | Analog I/O |
− | | | + | | AH12 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 191 |
− | | | + | | DSI-DATA1_N |
− | | | + | | Analog I/O |
− | | | + | | AJ17 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 192 |
− | | | + | | CSI-DATA1_P |
− | | | + | | Analog I/O |
− | | | + | | AJ12 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 193 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 194 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 195 |
− | | | + | | DSI-DATA0_P |
− | | | + | | Analog I/O |
− | | | + | | AH16 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 196 |
− | | | + | | CSI-DATA0_N |
− | | | + | | Analog I/O |
− | | | + | | AH13 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 197 |
− | | | + | | DSI-DATA0_N |
− | | | + | | Analog I/O |
− | | | + | | AJ16 |
− | | | + | | MIPI-DSI line |
|- | |- | ||
− | | | + | | 198 |
− | | | + | | CSI-DATA0_P |
− | | | + | | Analog I/O |
− | | | + | | AJ13 |
− | | | + | | MIPI-CSI line |
|- | |- | ||
− | | | + | | 199 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | 200 |
− | | | + | | GND |
− | | | + | | Power |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | - |
− | | | + | | WLAN-ENABLE |
− | | | + | | P40-2 |
− | | | + | | A17 |
− | | <br /> | + | | 1DX radio module line (WiFi)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | WLAN-H-WAKE |
− | | | + | | P19-1 |
− | | | + | | B2 |
− | | <br /> | + | | 1DX radio module line (WiFi)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | SD1-CLK |
− | | | + | | - |
− | | | + | | H3 |
− | | <br /> | + | | 1DX radio module line (WiFi)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | SD1-CMD |
− | | | + | | - |
− | | | + | | J2 |
− | | <br /> | + | | 1DX radio module line (WiFi)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | SD1-DATA0 |
− | | | + | | - |
− | | | + | | H1 |
− | | <br /> | + | | 1DX radio module line (WiFi)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | SD1-DATA1 |
− | | | + | | - |
− | | | + | | H2 |
− | | <br /> | + | | 1DX radio module line (WiFi)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | SD1-DATA2 |
− | | | + | | - |
− | | | + | | K2 |
− | | <br /> | + | | 1DX radio module line (WiFi)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | SD1-DATA3 |
− | | | + | | - |
− | | | + | | J1 |
− | | <br /> | + | | 1DX radio module line (WiFi)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | UART2-RXD |
− | | | + | | P48-1 |
− | | | + | | B23 |
− | | <br /> | + | | 1DX radio module line (BLE)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | UART2-TXD |
− | | | + | | P48-0 |
− | | | + | | B22 |
− | | <br /> | + | | 1DX radio module line (BLE)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | UART2-RTS |
− | | | + | | P48-4 |
− | | | + | | B23 |
− | | <br /> | + | | 1DX radio module line (BLE)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | UART2-CTS |
− | | | + | | P48-3 |
− | | | + | | C22 |
− | | <br /> | + | | 1DX radio module line (BLE)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | BT-DEV-WAKE |
− | | | + | | P39-0 |
− | | | + | | A16 |
− | | <br /> | + | | 1DX radio module line (BLE)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | BT-HOST-WAKE |
− | | | + | | P39-1 |
− | | | + | | C15 |
− | | <br /> | + | | 1DX radio module line (BLE)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | BT-REG-ON |
− | | | + | | P39-3 |
− | | | + | | B16 |
− | | <br /> | + | | 1DX radio module line (BLE)<br /> Not available externally |
|- | |- | ||
− | | | + | | - |
− | | | + | | JTAG-TMS |
− | | | + | | |
− | | | + | | AD2 |
− | | <br />1.8V | + | | JTAG interface<br /> 1.8V Power Domain |
|- | |- | ||
− | | | + | | - |
− | | | + | | JTAG-TCK |
− | | | + | | |
− | | | + | | AE1 |
− | | <br /> | + | | JTAG interface<br /> 1.8V Power Domain |
|- | |- | ||
− | | | + | | - |
− | | | + | | JTAG-TDO |
− | | | + | | |
− | | | + | | AE2 |
− | | <br />1.8V | + | | JTAG interface<br /> 1.8V Power Domain |
|- | |- | ||
− | | | + | | - |
− | | | + | | JTAG-TDI |
− | | | + | | |
− | | | + | | AF1 |
− | | <br /> | + | | JTAG interface<br /> 1.8V Power Domain |
|- | |- | ||
− | | | + | | - |
− | | | + | | JTAG-TRST |
− | | | + | | |
− | | | + | | AF2 |
− | | <br />1.8V | + | | JTAG interface<br /> 1.8V Power Domain |
|- | |- | ||
− | | | + | | - |
− | | | + | | QSPI-CLK |
− | | | + | | |
− | | | + | | C4 |
− | | | + | | Optional on-board QSPI Flash (W25Q128FWPIG) |
|- | |- | ||
− | | | + | | - |
− | | | + | | QSPI-IO0 |
− | | | + | | |
− | | | + | | A3 |
− | | | + | | Optional on-board QSPI Flash (W25Q128FWPIG) |
|- | |- | ||
− | | | + | | - |
− | | | + | | QSPI-IO1 |
− | | | + | | |
− | | | + | | B3 |
− | | | + | | Optional on-board QSPI Flash (W25Q128FWPIG) |
|- | |- | ||
− | | | + | | - |
− | | | + | | QSPI-IO2 |
− | | | + | | |
− | | | + | | A4 |
− | | | + | | Optional on-board QSPI Flash (W25Q128FWPIG) |
|- | |- | ||
− | | | + | | - |
− | | | + | | QSPI-IO3 |
− | | | + | | |
− | | | + | | B4 |
− | | | + | | Optional on-board QSPI Flash (W25Q128FWPIG) |
|- | |- | ||
− | | | + | | - |
− | | | + | | QSPI-SS |
− | | | + | | |
− | | | + | | A2 |
− | | | + | | Optional on-board QSPI Flash (W25Q128FWPIG) |
+ | |} | ||
+ | |||
+ | == JTAG Connector == | ||
+ | [[File:VisionSOM-x2L-JTAG-Connector.jpg|650px|center]] | ||
+ | |||
+ | {| class="wikitable" | ||
|- | |- | ||
− | + | ! Connector pin number | |
− | + | ! Default function | |
− | + | ! GPIO | |
− | + | ! BGA456 ball | |
− | + | ! Notes | |
|- | |- | ||
− | | | + | | JTAG-CONN-1 |
− | | | + | | VDD-1V8 |
− | | | + | | - |
− | | | + | | - |
− | | | + | | |
|- | |- | ||
− | | | + | | JTAG-CONN-2 |
− | | | + | | TMS (SWDIO) |
− | | | + | | - |
− | | | + | | AD2 |
− | | | + | | 10kOhm pull-up |
|- | |- | ||
− | | | + | | JTAG-CONN-3 |
− | | | + | | TCK (SWDCLK) |
− | | | + | | - |
− | | | + | | AE1 |
− | | | + | | 10kOhm pull-up |
|- | |- | ||
− | | | + | | JTAG-CONN-4 |
− | | | + | | TDO |
− | | | + | | - |
− | | | + | | AE2 |
− | | | + | | 10kOhm pull-up |
|- | |- | ||
− | | | + | | JTAG-CONN-5 |
− | | | + | | TDI |
− | | | + | | - |
− | | | + | | AF1 |
− | | | + | | 10kOhm pull-up |
|- | |- | ||
− | | | + | | JTAG-CONN-6 |
− | | | + | | TRST |
− | | | + | | - |
− | | | + | | AF2 |
− | | | + | | 10kOhm pull-up |
|- | |- | ||
− | | | + | | JTAG-CONN-7 |
− | | | + | | DEBUG EN |
− | | | + | | - |
− | | | + | | AE18 |
− | | | + | | 10kOhm pull-down |
|- | |- | ||
− | | | + | | JTAG-CONN-8 |
− | + | | GND | |
− | + | | - | |
− | + | | - | |
− | + | | - | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |- | ||
− | | | ||
− | |||
− | |||
− | |||
− | |||
− | |- | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|} | |} | ||
== Dimensions == | == Dimensions == | ||
− | [[File: | + | [[File:visionsom-x2l-dimensions.png|650px|center]] |
Latest revision as of 10:14, 4 January 2024
VisionSOM-V2L Datasheet and Pinout
Contents
General description
The VisionSOM-V2L family is a SODIMM-sized SoM based on the Renesas dual core RZ/V2L application processor which features an advanced implementation of DRP-AI (ML+AI) coprocessor. The VisionSOM-V2L family offers energy efficient dual ARM Cortex-A55 cores (at speed up to 1.2GHz) and ARM Cortex-M33 core (at speed up to 200MHz) as well as a 3D Graphics Processing Unit (ARM Mali-G31 GPU @500MHz, 1920x1080 @60fps) with Open GL 3.2ES/OpenCL 2.0 (Full Profile) capabilities and Video Codec Processor (VCP) with 1920x1080 @30fps.
The VisionSOM-V2L is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power, optinally integrated 2.4GHz Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-V2L provides a variety memory configuration, including 1GB of fast and efficient DDR4 and eMMC Flash that meets our customers requirements.
The SoM supports connections to a variety of interfaces: two high-speed USB 2.0 with integrated PHY, dual Ethernet 1Gbit, audio, MIPI-DSI display output with optional touch panel, MIPI-CSI camera input with scaling processor, serial communication interfaces including 2xCAN. In addition, the system supports industrial grade embedded applications.
SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
Applications
- IoT Edge Devices
- IoT gateways
- Machine vision equipment
- AI+ML Decision/Recognition Systems
- Robotics
- Human-machine Interfaces (HMI)
- IP Cameras
- Home Appliances
- Home Automation – Smart Home
- Residential gateways
- Industrial embedded Linux computer
- Fitness/outdoor equipment
Features
- Powered by dual core Renesas RZ/V2L application processor (R9A07G054L27GBG)
- Dual ARM Cortex-A55 core at speed up to 1.2GHz
- ARM Cortex-M33 core at speed up to 200MHz
- Integrated Machine-Learning (ML) and Artificial Intelligence (AI) AI Accelerator (DRP-AI)
- Integrated 3D GPU (ARM Mali-G31 @500MHz)
- 1GB RAM (DDR4)
- Up to 32GB eMMC memory
- Optional Murata radio module 2.4GHz Wi-Fi and Bluetooth v5.1
- Built-in dual USB 2.0 interface
- Built-in 2xCAN-FD interfaces
- Built-in MIPI-DSI display interface
- Built-in MIPI-CSI camera interface
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- Integrated security features
Pictures of SOM versions
Version | Photo |
---|---|
eMMC |
WiFi/BT module is available for all memory configurations. |
Ordering info
SLS | Product type SLS - System on Module |
2 | SOM Name 2 - High Performance VisionSOM SODIM200 module |
2 | CPU Family 2 - Renesas RZ/V2L family |
CpuType | CPU Type RV2LDC - RZ/V2L dual Cortex-A55 + Cortex-M33 + DRP-AI |
Clock | CPU Clock Speed 1200C - 1.2GHz |
RamSize | DDR4 RAM Size 01GR - 1GB (1024MB) |
FlashSize | eMMC Memory Size 04GE - 4GB eMMC 08GE - 8GB eMMC 16GE - 16GB eMMC 32GE - 32GB eMMC |
SF | Special Features 0SF - No Special Features 1WB - Built-in 2.4GHz Wi-Fi and Bluetooth v5.1 |
TEMP | Operating Temperature E - Extended: -25 to +70 C I - Industrial: -40 to +85 C |
Block Diagram
Operating ranges
Parameter | Value | Unit | Comment |
---|---|---|---|
Power Supply | |
|
Connected to VDD-5V0 SODIM200 pins |
Max. input GPIO voltage | |
|
In 3.3V power domain |
Max. input GPIO voltage | |
|
In 1.8V power domain |
Environment temperature | |
oC | Industrial range w/o WiFi module |
|
Industrial range with WiFi module | ||
|
Consumer range |
Electrical parameters
SOM signal name |
Parameter | Value | Unit | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
VDD-5V | Supply Voltage (Input) | 4.0 | 5.0 | 5.5 | V |
VDD-1V8 | Output power supply for external 1.8V accesories | - | - | 0.31 | A |
VDD-3V3 | Output power supply for external 3.3V accesories | - | - | 0.32 | A |
VGPIO @1V8 | GPIO Input Voltage | 0 | - | 2.05 | V |
VGPIO @3V3 | GPIO Input Voltage | 0 | - | 3.62 | V |
VUSB0-VBUS | USB VBUS Input Voltage | 0 | - | 5.253 | V |
VETH0 | I/O voltage for Ethernet 0 | 0 | - | 1.8 | V |
VETH1 | I/O voltage for Ethernet 1 | 0 | - | 1.8 or 3.34 | V |
VJTAG | I/O voltage for Ethernet 1 | 0 | - | 1.85 | V |
VADC-IN | Input voltage for ADC-CHx6 | 0 | - | 1.8 | V |
Notes:
1. Total current on both VDD-1V8 outputs.
1. Total current on both VDD-3V3 outputs.
3. Input current is limited by 1+1,8kOhm resistors (voltage divider) connected in series.
4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-up'ed.).
5. JTAG/SWD interface lines are 1.8V compatible.
6. "x" means 0...7.
SoM pinout
Important notes:
1. Detail pin configurations description you can find, edit and arrange in dedicated SCFG file (with free "Smart Configurator" tool).
2. On-board eMMC memory is connected to SDIO0 interface.
3. Optional on-board QSPI Flash memory is connected to QSPI0 interface.
4. SDIO1 interface is used to communication with Murata 1DX radio module.
5. UART2 is used to communication with BT-BLE interatted with Murata 1DX radio module.
6. I2C3 is used to communication with on-board PMIC.
SOM pin number | Default function | GPIO | BGA456 ball | Notes |
---|---|---|---|---|
1 | GND | Power | - | |
2 | GND | Power | - | |
3 | ET0-PHY-RST | P47-1 | A20 | 1.8V Power Domain GPIO mode not allowed |
4 | PWR-GOOD | Output | PMIC power-good signalling for external devices | |
5 | ET0-INT | P47-0 | B20 | 3.3V Power Domain |
6 | PWR-ON | Input | PMIC PWRON input (on-off function) Internal pull-down Connect to GND if not used Connect to VDD-3V3 with external pull-up resistor (4.7kOhm) and pushbutton to GND if used | |
7 | ET0-MDIO | I/O | U1 | 1.8V Power Domain GPIO mode not allowed |
8 | PWR-FAIL | Input | PMIC enable-input: PWR-FAIL='0' -> SOM power supply is off PWR-FAIL='1' or left open -> SOM power supply is on Can bue used as cold-reset input (active low) | |
9 | ET0-MDC | I/O | U2 | 1.8V Power Domain GPIO mode not allowed |
10 | RESET-OUT | Output | RESET output for external peripherals | |
11 | GND | Power | - | |
12 | RESET-IN | Input | MPU reset input, active low | |
13 | ET0-RXC | I/O | P2 | 1.8V Power Domain GPIO mode not allowed |
14 | GND | Power | - | |
15 | ET0-RX-CTL | I/O | P1 | 1.8V Power Domain GPIO mode not allowed |
16 | UART0-RXD | P38-1 | B15 | 3.3V Power Domain |
17 | ET0-RXD0 | I/O | R2 | 1.8V Power Domain GPIO mode not allowed |
18 | UART0-TXD | P38-0 | A15 | 3.3V Power Domain |
19 | ET0-RXD1 | I/O | R1 | 1.8V Power Domain GPIO mode not allowed |
20 | UART1-CTS | P41-0 | E17 | 3.3V Power Domain |
21 | ET0-RXD2 | I/O | T2 | 1.8V Power Domain GPIO mode not allowed |
22 | UART1-RTS | P41-1 | A18 | 3.3V Power Domain |
23 | ET0-RXD3 | I/O | T1 | 1.8V Power Domain GPIO mode not allowed |
24 | UART1-RXD | P40-0 | C17 | 3.3V Power Domain |
25 | GND | Power | - | |
26 | UART1-TXD | P40-1 | B17 | 3.3V Power Domain |
27 | ET0-TX-CTL | I/O | N2 | 1.8V Power Domain GPIO mode not allowed |
28 | UART4-RXD | P2-1 | A13 | 3.3V Power Domain |
29 | ET0-TXC | I/O | N1 | 1.8V Power Domain GPIO mode not allowed |
30 | UART4-TXD | P2-0 | B13 | 3.3V Power Domain |
31 | ET0-TXD3 | I/O | N1 | 1.8V Power Domain GPIO mode not allowed |
32 | UART3-RXD | P0-1 | B12 | 3.3V Power Domain |
33 | ET0-TXD2 | I/O | L2 | 1.8V Power Domain GPIO mode not allowed |
34 | UART3-TXD | P0-0 | A11 | 3.3V Power Domain |
35 | ET0-TXD1 | I/O | M2 | 1.8V Power Domain GPIO mode not allowed |
36 | VBAT-RTC | Power | - | RTC 3V battery |
37 | ET0-TXD0 | I/O | M1 | 1.8V Power Domain GPIO mode not allowed |
38 | GND | Power | - | |
39 | VDD-1V8 | Power | 1.8V output for external devices, max. 300 mA | |
40 | VDD-1V8 | Power | 1.8V output for external devices, max. 300 mA | |
41 | VDD-5V0 | Power | External power supply | |
42 | VDD-5V0 | Power | External power supply | |
43 | VDD-5V0 | Power | External power supply | |
44 | VDD-5V0 | Power | External power supply | |
45 | VDD-5V0 | Power | External power supply | |
46 | VDD-5V0 | Power | External power supply | |
47 | VDD-5V0 | Power | External power supply | |
48 | VDD-5V0 | Power | External power supply | |
49 | VDD-5V0 | Power | External power supply | |
50 | VDD-5V0 | Power | External power supply | |
51 | NC | Not Connected | - | |
52 | NC | Not Connected | - | |
53 | VDD-3V3 | Power | 3.3V output for external devices, max. 300mA | |
54 | VDD-3V3 | Power | - | 3.3V output for external devices, max. 300mA |
55 | GND | Power | - | |
56 | SYSLED | P42-0 | AG4 | 3.3V Power Domain |
57 | VPROG | NC | - | For SoMLabs purposes only, leave unconnected |
58 | GND | Power | - | |
59 | BOOT-RECOVERY | Input | BOOT input, active low during reset | |
60 | SSI-MCLK | AUDIO_CLK1 | E12 | - |
61 | GND | Power | - | |
62 | SSI0-RXD | P7-1 | AH28 | 3.3V Power Domain |
63 | ET1-VDD-SEL | Input | Ethernet 1 (ET1) interface voltage selection: ET1-VDD-SEL='0' -> V=1.8V ET1-VDD-SEL='1' or left open -> V=3.3V The line has internal pull-up. | |
64 | SSI0-TXD | P7-0 | AJ28 | 3.3V Power Domain |
65 | ET1-PHY-RST | P47-3 | B21 | 3.3V Power Domain |
66 | SSI0-RCK | P6-1 | AH27 | 3.3V Power Domain |
67 | ET1-INT | P47-2 | A21 | 3.3V Power Domain |
68 | SSI0-BCK | P6-0 | AJ27 | 3.3V Power Domain |
69 | ET1-MDIO | P37-1 | W1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
70 | GND | Power | - | |
71 | ET1-MDC | P37-0 | W2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
72 | CAN1-RX | P13-0 | AF23 | 3.3V Power Domain |
73 | GND | Power | - | |
74 | CAN1-TX | P12-1 | AE23 | 3.3V Power Domain |
75 | ET1-RXC | P33-1 | AC1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
76 | CAN0-RX | P42-2 | AJ3 | 3.3V Power Domain |
77 | ET1-RX-CTL | P34-0 | AC2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
78 | CAN0-TX | P42-1 | AE7 | 3.3V Power Domain |
79 | ET1-RXD0 | P34-1 | AC3 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
80 | GND | Power | - | |
81 | ET1-RXD1 | P35-0 | AC4 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
82 | I2C3-SCL-EXT | P46-3 | D13 | I2C interface used for on-board PMIC configuration Built-in pull-up resistor 2.2kOhm connected to 3.3V 3.3V Power Domain |
83 | ET1-RXD2 | P35-1 | AB4 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
84 | I2C3-SDA-EXT | P46-2 | C12 | I2C interface used for on-board PMIC configuration Built-in pull-up resistor 2.2kOhm connected to 3.3V 3.3V Power Domain |
85 | ET1-RXD3 | P36-0 | AB3 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
86 | I2C2-SCL | P42-4 | AC5 | Built-in pull-up resistor 2.2kOhm connected to 3.3V |
87 | GND | Power | - | |
88 | I2C2-SDA | P42-3 | AH3 | Built-in pull-up resistor 2.2kOhm connected to 3.3V |
89 | ET1-TX-CTL | P29-1 | Y1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
90 | P19-0 | P19-0 | B1 | 3.3V Power Domain |
91 | ET1-TXC | P29-0 | AB2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
92 | P18-0 | P18-0 | C2 | 3.3V Power Domain |
93 | ET1-TXD3 | P31-1 | Y2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
94 | GND | Power | - | |
95 | ET1-TXD2 | P31-0 | AA1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
96 | P18-1 | P18-1 | D3 | 3.3V Power Domain |
97 | ET1-TXD1 | P30-1 | AA2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
98 | P45-0 | P45-0 | A8 | 3.3V Power Domain |
99 | ET1-TXD0 | P30-0 | AB1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
100 | P45-2 | P45-2 | A9 | 3.3V Power Domain |
101 | GND | Power | - | |
102 | P45-3 | P45-3 | B9 | 3.3V Power Domain |
103 | USB1-D_N | Analog I/O | - | |
104 | P46-0 | P46-0 | B10 | 3.3V Power Domain |
105 | USB1-D_P | Analog I/O | - | |
106 | P46-1 | P46-1 | A10 | 3.3V Power Domain |
107 | USB1-OC | P8-1 | AJ20 | 3.3V Power Domain |
108 | P45-1 | P45-1 | D12 | 3.3V Power Domain |
109 | USB1-EN | P8-0 | AH19 | 3.3V Power Domain |
110 | P1-1 | P1-1 | A12 | 3.3V Power Domain |
111 | GND | Power | - | |
112 | P3-1 | P3-1 | B14 | 3.3V Power Domain |
113 | USB0-OC | P5-0 | AJ4 | 3.3V Power Domain |
114 | P1-0 | P1-0 | C13 | 3.3V Power Domain |
115 | USB0-EN | P4-0 | AJ5 | 3.3V Power Domain |
116 | GND | Power | - | |
117 | USB0-ID | P5-1 | AH4 | 3.3V Power Domain |
118 | P3-0 | P3-0 | A14 | 3.3V Power Domain |
119 | USB0-D_N | Analog I/O | - | |
120 | P48-2 | P48-2 | A22 | 3.3V Power Domain |
121 | USB0-D_P | Analog I/O | - | |
122 | P4-1 | P4-1 | AH6 | 3.3V Power Domain |
123 | USB0-VBUS | Dedicated input | AH10 | 3.3V Power Domain |
124 | P7-2 | P7-2 | AJ19 | 3.3V Power Domain |
125 | GND | Power | - | |
126 | GND | Power | - | |
127 | P11-1 | P11-1 | AF22 | 3.3V Power Domain |
128 | P11-0 | P11-0 | AG22 | 3.3V Power Domain |
129 | P8-2 | P8-2 | AH20 | 3.3V Power Domain |
130 | P12-0 | P12-0 | AE22 | 3.3V Power Domain |
131 | P9-1 | P9-1 | AH21 | 3.3V Power Domain |
132 | P13-1 | P13-1 | AG23 | 3.3V Power Domain |
133 | P9-0 | P9-0 | AJ21 | 3.3V Power Domain |
134 | SPI1-SSL | P44-3 | B19 | 3.3V Power Domain |
135 | SPI0-SSL | P43-3 | B19 | 3.3V Power Domain |
136 | SPI1-MISO | P44-2 | D18 | 3.3V Power Domain |
137 | SPI0-MISO | P43-2 | E18 | 3.3V Power Domain |
138 | SPI1-MOSI | P44-1 | F17 | 3.3V Power Domain |
139 | SPI0-MOSI | P43-1 | D17 | 3.3V Power Domain |
140 | SPI1-CLK | P44-0 | A19 | 3.3V Power Domain |
141 | SPI0-CLK | P43-0 | B18 | 3.3V Power Domain |
142 | GND | Power | - | |
143 | GND | Power | - | |
144 | I2C1-SCL | Dedicated I2C line | C23 | RIIC1_SCL Built-in pull-up resistor 2.2kOhm connected to 3.3V |
145 | P14-0 | P14-0 | AF27 | 3.3V Power Domain |
146 | I2C1-SDA | Dedicated I2C line | A24 | RIIC1_SDA Built-in pull-up resistor 2.2kOhm connected to 3.3V |
147 | P10-1 | P10-1 | AH22 | 3.3V Power Domain |
148 | I2C0-SCL | Dedicated I2C line | B24 | RIIC0_SCL Built-in pull-up resistor 2.2kOhm connected to 3.3V |
149 | P10-0 | P10-0 | AJ22 | 3.3V Power Domain |
150 | I2C0-SDA | Dedicated I2C line | A25 | RIIC0_SDA Built-in pull-up resistor 2.2kOhm connected to 3.3V |
151 | P15-0 | P15-0 | AH23 | 3.3V Power Domain |
152 | GND | Power | - | |
153 | P14-1 | P14-1 | AJ23 | 3.3V Power Domain |
154 | ADC-CH7 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
155 | P16-0 | P16-0 | AH24 | 3.3V Power Domain |
156 | ADC-CH6 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
157 | P15-1 | P15-1 | AJ24 | 3.3V Power Domain |
158 | ADC-CH5 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
159 | P17-0 | P17-0 | AH25 | 3.3V Power Domain |
160 | ADC-CH4 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
160 | SSI-MCLK | AUDIO-CLK | E12 | Reference clock output (for audio codec) |
161 | P16-1 | P16-1 | AJ25 | 3.3V Power Domain |
162 | ADC-CH3 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
163 | P17-2 | P17-2 | AH26 | 3.3V Power Domain |
164 | ADC-CH2 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
165 | P17-1 | P17-1 | AJ26 | 3.3V Power Domain |
166 | ADC-CH1 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
167 | P13-2 | P13-2 | AG26 | 3.3V Power Domain |
168 | ADC-CH0 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
169 | GND | Power | - | |
170 | GND | Power | - | |
171 | DSI-DATA3_P | Analog I/O | AH18 | MIPI-DSI line |
172 | CSI-DATA3_N | Analog I/O | AH11 | MIPI-CSI line |
173 | DSI-DATA3_N | Analog I/O | AJ18 | MIPI-DSI line |
174 | CSI-DATA3_P | Analog I/O | AJ11 | MIPI-CSI line |
175 | GND | Power | - | |
176 | GND | Power | - | |
177 | DSI-DATA2_P | Analog I/O | AH15 | MIPI-DSI line |
178 | CSI-DATA2_N | Analog I/O | AH14 | MIPI-CSI line |
179 | DSI-DATA2_N | Analog I/O | AJ15 | MIPI-DSI line |
180 | CSI-DATA2_P | Analog I/O | AJ14 | MIPI-CSI line |
181 | GND | Power | - | |
182 | GND | Power | - | |
183 | DSI-CLK_P | Analog I/O | AG17 | MIPI-DSI line |
184 | CSI-CLK_N | Analog I/O | AG12 | MIPI-CSI line |
185 | DSI-CLK_N | Analog I/O | AG18 | MIPI-DSI line |
186 | CSI-CLK_P | Analog I/O | AG13 | MIPI-CSI line |
187 | GND | Power | - | |
188 | GND | Power | - | |
189 | DSI-DATA1_P | Analog I/O | AH17 | MIPI-DSI line |
190 | CSI-DATA1_N | Analog I/O | AH12 | MIPI-CSI line |
191 | DSI-DATA1_N | Analog I/O | AJ17 | MIPI-DSI line |
192 | CSI-DATA1_P | Analog I/O | AJ12 | MIPI-CSI line |
193 | GND | Power | - | |
194 | GND | Power | - | |
195 | DSI-DATA0_P | Analog I/O | AH16 | MIPI-DSI line |
196 | CSI-DATA0_N | Analog I/O | AH13 | MIPI-CSI line |
197 | DSI-DATA0_N | Analog I/O | AJ16 | MIPI-DSI line |
198 | CSI-DATA0_P | Analog I/O | AJ13 | MIPI-CSI line |
199 | GND | Power | - | |
200 | GND | Power | - | |
- | WLAN-ENABLE | P40-2 | A17 | 1DX radio module line (WiFi) Not available externally |
- | WLAN-H-WAKE | P19-1 | B2 | 1DX radio module line (WiFi) Not available externally |
- | SD1-CLK | - | H3 | 1DX radio module line (WiFi) Not available externally |
- | SD1-CMD | - | J2 | 1DX radio module line (WiFi) Not available externally |
- | SD1-DATA0 | - | H1 | 1DX radio module line (WiFi) Not available externally |
- | SD1-DATA1 | - | H2 | 1DX radio module line (WiFi) Not available externally |
- | SD1-DATA2 | - | K2 | 1DX radio module line (WiFi) Not available externally |
- | SD1-DATA3 | - | J1 | 1DX radio module line (WiFi) Not available externally |
- | UART2-RXD | P48-1 | B23 | 1DX radio module line (BLE) Not available externally |
- | UART2-TXD | P48-0 | B22 | 1DX radio module line (BLE) Not available externally |
- | UART2-RTS | P48-4 | B23 | 1DX radio module line (BLE) Not available externally |
- | UART2-CTS | P48-3 | C22 | 1DX radio module line (BLE) Not available externally |
- | BT-DEV-WAKE | P39-0 | A16 | 1DX radio module line (BLE) Not available externally |
- | BT-HOST-WAKE | P39-1 | C15 | 1DX radio module line (BLE) Not available externally |
- | BT-REG-ON | P39-3 | B16 | 1DX radio module line (BLE) Not available externally |
- | JTAG-TMS | AD2 | JTAG interface 1.8V Power Domain | |
- | JTAG-TCK | AE1 | JTAG interface 1.8V Power Domain | |
- | JTAG-TDO | AE2 | JTAG interface 1.8V Power Domain | |
- | JTAG-TDI | AF1 | JTAG interface 1.8V Power Domain | |
- | JTAG-TRST | AF2 | JTAG interface 1.8V Power Domain | |
- | QSPI-CLK | C4 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-IO0 | A3 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-IO1 | B3 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-IO2 | A4 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-IO3 | B4 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-SS | A2 | Optional on-board QSPI Flash (W25Q128FWPIG) |
JTAG Connector
Connector pin number | Default function | GPIO | BGA456 ball | Notes |
---|---|---|---|---|
JTAG-CONN-1 | VDD-1V8 | - | - | |
JTAG-CONN-2 | TMS (SWDIO) | - | AD2 | 10kOhm pull-up |
JTAG-CONN-3 | TCK (SWDCLK) | - | AE1 | 10kOhm pull-up |
JTAG-CONN-4 | TDO | - | AE2 | 10kOhm pull-up |
JTAG-CONN-5 | TDI | - | AF1 | 10kOhm pull-up |
JTAG-CONN-6 | TRST | - | AF2 | 10kOhm pull-up |
JTAG-CONN-7 | DEBUG EN | - | AE18 | 10kOhm pull-down |
JTAG-CONN-8 | GND | - | - | - |