Difference between revisions of "VisionSOM-RT117x Datasheet and Pinout"
From SomLabs Wiki
(→Ordering info) |
(→Block Diagram) |
||
Line 160: | Line 160: | ||
== Block Diagram == | == Block Diagram == | ||
− | [[File:VisionSOM- | + | [[File:VisionSOM-RT117x-block-diagram.png|center]] |
== Operating ranges == | == Operating ranges == |
Revision as of 17:02, 21 February 2024
VisionSOM-RT117x Datasheet and Pinout
Contents
General description
The VisionSOM-RT117x family is a SODIMM-sized SoM based on the NXP i.MX RT1170 family real-time microcontroller which features an advanced implementation of a dual ARM Cortex-M7 and Cortex-M4 cores. The Cortex-M7 operates at up to 1 GHz and the Cortex-M4 up to 400 MHz with 2 MB on-chip RAM. The real-time microcontroller (MCU) family offers various memory interfaces and a wide range of connectivity interfaces including 3x Ethernet up to Gbps with TSN/AVB, UART, SPI, I2C, USB and 3x CAN-FD. The i.MX RT1170 provides advanced embedded security including secure boot and crypto engines.
The VisionSOM-RT117x is a low power highly integrated SoM (System-on-Module) featuring high computation performance, real-time functionality and MCU usability. High security enabled by AES-128/256 and RSA4096, HAB and On-the-fly QSPI Flash Decryption together with 2D graphical acceleration make an ideally suited solution for home and industrial control systems, wireless application, communication solutions and real-time systems.
The system supports industrial grade targeting embedded application.
SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display with MIPI-DSI and touch panel.
Applications
- Industrial embedded RTOS computer
- Home Appliances
- Air Conditioning
- Building Security
- Fleet Management
- Heat Metering
- Home Automation – Smart Home
- Human-machine Interfaces (HMI)
- Motor Drives
- Cash Register
- Intermediate Flight Controller
- Smart grid Infrastructure
- IoT gateways
- Residential getaways
- Smart Lock
- Robotics
- Toys and Board Games
Features
- Powered by NXP i.MX RT117x application processor
- Core clock up to 1GHz
- 2MB on-chip RAM memory
- up to 128MB SDRAM memory
- up to 32MB QuadSPI Flash memory
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- FreeRTOS support
Pictures of SOM versions
Version | Photo |
---|---|
SDRAM & dual QSPI |
Ordering info
SLS | Product type SLS - System on Module |
1 | SOM Name 1 - VisionSOM SODIMM200 |
4 | CPU Family 4 - i.MX RT117x |
CpuType | CPU Type RT1176 - i.MX RT 1176 |
Clock | CPU Clock Speed 800C - 800MHz |
RamSize | RAM Size 0R - No RAM 32R - 32MB 64R - 64MB 128R - 128MB |
FlashSize | Flash Size Type and Density 4QSPI - 4MB QSPI Flash 16QSPI - 16MB QSPI Flash 32QSPI - 32MB QSPI Flash 64OF - 64MB Octal Flash |
SF | Special Features 0SF - No Special Features |
TEMP | Operating Temperature C - Consumer: 0 to +70 C I - Industrial: -40 to +85 C |
Block Diagram
Operating ranges
Parameter | Value | Unit | Comment |
---|---|---|---|
Power Supply | |
|
Connected to +5VIN SODIMM pin |
Internal LDO output voltage | |
|
Generated by internal LDO |
Internal LDO output current | |
|
Maximum value |
Input GPIO voltage | |
|
- |
Environment temperature1 | |
oC | Industrial range |
|
Consumer range |
Note:
1. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).
Electrical parameters
SOM signal name |
Parameter | Value | Units | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
+5VIN | Supply Voltage | 4.0 | 5.0 | 5.5 | V |
- | Total Supply Current1 | - | 80 | 150 | mA |
VGPIO | GPIO Input Voltage | 0 | 3.3 | 3.62 | V |
+3.3VOUT | SOM Internal LDO Output Current |
- | - | 0.5 | A |
USB-OTGx-VBUS | USB Supply | 4.40 | - | 5.5 | V |
VDD-COIN-3V | SNVS Backup Battery Supply |
2.66 | - | 3.6 | V |
- | ADC Inputs Voltage | 0 | - | 3.3 | V |
Notes:
1. Excluding external load connected to +3.3VOUT lines.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.
Pinout
Important notes:
1. Detail pin configurations description you can find, edit and arrange in dedicated MEX files (with free "i.MX Pin Tool" configurational tool):
VisionSOM-RT52 with QSPI Flash memory on board or
VisionSOM-RT52 with eMMC Flash memory on board
2. LCD_DATAxx pins are internally used for boot sequence configuration. We recommend to use LCD_DATAxx lines as outputs or using eFuse boot configuration.
3. Internal peripherals and pin functions depends on i.MX-RT version (i.a. in RT1052 there is just one Ethernet channel). Description in table fits to RT1052 model.
SODIMM pin | Functional domain | Function name | i.MX-RT pad name | Description (refer to i.MX-RT manuals for details) |
---|---|---|---|---|
1 | Power | GND | - | - |
2 | Power | GND | - | - |
3 | Ctrl | PMIC-STBY-REQ | CCM_PMIC_STBY_REQ | Output, leave open if not used. |
4 | Ctrl | MX-POR-B | - | External warm reset input, active L. |
5 | Ctrl | PMIC-ON-REQ | SNVS_PMIC_ON_REQ | Output, leave open if not used. |
6 | Power | VDD-SNVS-3V3 | VDD_SNVS_IN | SNVS backup power supply must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. Internally connected to +3.3V, leave open. |
7 | BOOT | BOOT1 | GPIO_AD_B0_05 | BOOT1 configuration line or multifunction GPIO with 3.3V logic levels.
By default this line is pulled-up with 1k resistor. |
8 | Power | VDD-COIN-3V | VDD_SNVS_IN | Optional external coin battery for SNVS power domain, must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state.
Leave open if not used. |
9 | BOOT | BOOT0 | GPIO_AD_B0_04 | BOOT1 configuration line or multifunction GPIO with 3.3V logic levels.
Pin shared with GPIO-B0-04 line. By default this line is pulled-down with 10k resistor. |
10 | NC | - | - | Not internally connected. |
11 | USB | USB-OTG2-VBUS | USB_OTG2_VBUS | +5V USB bus. Leave open if not used. |
12 | NC | - | - | Not internally connected. |
13 | USB | USB-OTG1-VBUS | USB_OTG1_VBUS | +5V USB bus. Leave open if not used. |
14 | Ctrl | ONOFF | ONOFF | Input for power interrupt generation. Leave open if not used. |
15 | Power | GND | - | - |
16 | Ctrl | POR-B | POR_B | Cold reset negative logic input resets all modules and logic in the IC.May be used in addition to internally generated power on reset signal (logical AND, both internal and external signals are considered active low). The POR_B input (if used) must be immediately asserted at power-up and remain asserted until after the last power rail reaches its working voltage. |
17 | Power | GND | - | - |
18 | NC | - | - | Not internally connected. |
19 | USB | USB-OTG2-DP | USB_OTG2_DP | Leave open if not used. |
20 | Power | GND | - | - |
21 | USB | USB-OTG2-DN | USB_OTG2_DN | Leave open if not used. |
22 | Power | GND | - | - |
23 | Power | GND | - | - |
24 | NC | - | - | Not internally connected. |
25 | USB | USB-OTG1-DP | USB_OTG1_DP | Leave open if not used. |
26 | Power | GND | - | - |
27 | USB | USB-OTG1-DN | USB_OTG1_DN | Leave open if not used. |
28 | Power | GND | - | - |
29 | Power | GND | - | - |
30 | NC | - | - | Not internally connected. |
31 | USB | nUSB-OTG-CHD | USB_OTG1_CHD_B | Leave open if not used. |
32 | NC | - | - | Not internally connected. |
33 | JTAG | JTAG-MOD | GPIO_AD_B0_08 | JTAG mode selector. multifunction GPIO with 3.3V levels. Leave open if not used (bulit-in 4.7k pull-down resistor). |
34 | NC | - | - | Not internally connected. |
35 | Power | GND | - | - |
36 | NC | - | - | Not internally connected. |
37 | CLK1-N | CCM_CLK1_N | General purpose differential high speed clock input/output.Leave open if not used. | |
38 | Power | GND | - | - |
39 | CLK1-P | CCM_CLK1_P | General purpose differential high speed clock input/output.Leave open if not used. | |
40 | Power | GND | - | - |
41 | Power | GND | - | - |
42 | NC | - | - | Not internally connected. |
43 | JTAG | JTAG-TDI | GPIO_AD_B0_09 | JTAG TDI input line. Multifunction GPIO with 3.3V logic levels. |
44 | NC | - | - | Not internally connected. |
45 | GPIO | GPIO-B1-09 | GPIO_AD_B1_09 | Multifunction GPIO with 3.3V logic levels. |
46 | JTAG | JTAG-TMS | GPIO_AD_B0_06 | JTAG TMS input line. Multifunction GPIO with 3.3V logic levels. |
47 | GPIO | GPIO-B0-04 | GPIO_AD_B0_04 | Multifunction GPIO with 3.3V logic levels.
Pin shared with BOOT-MODE0 line. |
48 | JTAG | JTAG-nTRST | GPIO_AD_B0_11 | JTAG nTRST input line. Multifunction GPIO with 3.3V logic levels. |
49 | GPIO | GPIO-B1-11 | GPIO_AD_B1_11 | Multifunction GPIO with 3.3V logic levels. |
50 | Power | GND | - | - |
51 | Power | GND | - | - |
52 | JTAG | JTAG-TDO | GPIO_AD_B0_10 | JTAG TDO ouput line. Multifunction GPIO with 3.3V logic levels. |
53 | GPIO | ENET-MDC | GPIO_EMC_40 | Multifunction GPIO with 3.3V logic levels. |
54 | JTAG | JTAG-TCK | GPIO_AD_B0_07 | JTAG TCK input line. Multifunction GPIO with 3.3V logic levels. |
55 | GPIO | GPIO-B0-03 | GPIO_AD_B0_03 | Multifunction GPIO with 3.3V logic levels. |
56 | GPIO | GPIO-B1-14 | GPIO_B1_14 | Multifunction GPIO with 3.3V logic levels. |
57 | COM-GPIO | UART1-TXD | GPIO_AD_B0_12 | UART1 TxD outputor multifunction GPIO with 3.3V logic levels. |
58 | GPIO | GPIO-B0-02 | GPIO_AD_B0_02 | Multifunction GPIO with 3.3V logic levels. |
59 | Power | GND | - | - |
60 | Power | GND | - | - |
61 | GPIO | ENET-MDIO | GPIO_EMC_41 | Multifunction GPIO with 3.3V logic levels. |
62 | GPIO | GPIO-B0-01 | GPIO_AD_B0_01 | Multifunction GPIO with 3.3V logic levels. |
63 | COM-GPIO | UART1-RXD | GPIO_AD_B0_13 | UART1 RxD inputor multifunction GPIO with 3.3V logic levels. |
64 | GPIO | GPIO-B0-00 | GPIO_AD_B0_00 | Multifunction GPIO with 3.3V logic levels. |
65 | COM-GPIO | UART2-TXD | GPIO_AD_B1_02 | UART2 TxD outputor multifunction GPIO with 3.3V logic levels. |
66 | COM-GPIO | UART1-CTS | GPIO_AD_B0_14 | UART1 CTS outputor multifunction GPIO with 3.3V logic levels. |
67 | COM-GPIO | UART2-RXD | GPIO_AD_B1_03 | UART2 RxD inputor multifunction GPIO with 3.3V logic levels. |
68 | COM-GPIO | UART5-RXD | GPIO_B1_13 | UART5 RxD inputor multifunction GPIO with 3.3V logic levels. |
69 | COM-GPIO | UART3-TXD | GPIO_AD_B1_06 | UART3 TxD inputor multifunction GPIO with 3.3V logic levels. |
70 | Power | GND | - | - |
71 | Power | GND | - | - |
72 | COM-GPIO | UART2-CTS | GPIO_AD_B1_00 | UART2 CTS outputor multifunction GPIO with 3.3V logic levels. |
73 | COM-GPIO | UART3-RXD | GPIO_AD_B1_07 | UART3 RxD inputor multifunction GPIO with 3.3V logic levels. |
74 | COM-GPIO | UART1-RTS | GPIO_AD_B0_15 | UART1 RTS inputor multifunction GPIO with 3.3V logic levels. |
75 | NC | - | - | Not internally connected. |
76 | COM-GPIO | UART3-CTS | GPIO_AD_B1_04 | UART3 CTS outputor multifunction GPIO with 3.3V logic levels. |
77 | NC | - | - | Not internally connected. |
78 | COM-GPIO | UART2-RTS | GPIO_AD_B1_01 | UART2 RTS inputor multifunction GPIO with 3.3V logic levels. |
79 | COM-GPIO | UART5-TXD | GPIO_B1_12 | UART5 TxD outputor multifunction GPIO with 3.3V logic levels. |
80 | COM-GPIO | UART3-RTS | GPIO_AD_B1_05 | UART3 RTS inputor multifunction GPIO with 3.3V logic levels. |
81 | Power | GND | - | - |
82 | Power | GND | - | - |
83 | NC | - | - | Not internally connected. |
84 | Power | GND | - | - |
85 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
86 | NC | - | - | Not internally connected. |
87 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
88 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
89 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
90 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
91 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
92 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
93 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
94 | NC | - | - | Not internally connected. |
95 | NC | - | - | Not internally connected. |
96 | Power | +5VIN | - | +4.0-5.5V input power supply. |
97 | Ethernet | ENET1-RXD0 | GPIO_B1_04 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
98 | Power | +5VIN | - | +4.0-5.5V input power supply. |
99 | Ethernet | ENET1-RXD1 | GPIO_B1_05 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
100 | Power | +5VIN | - | +4.0-5.5V input power supply. |
101 | Ethernet | ENET1-CRS-DV | GPIO_B1_06 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
102 | Power | +5VIN | +4.0-5.5V input power supply. | |
103 | Power | GND | - | - |
104 | Power | +5VIN | +4.0-5.5V input power supply. | |
105 | NC | - | - | Not internally connected. |
106 | Power | +5VIN | +4.0-5.5V input power supply. | |
107 | Power | GND | - | - |
108 | Power | +5VIN | +4.0-5.5V input power supply. | |
109 | NC | - | - | Not internally connected. |
110 | Power | +5VIN | - | +4.0-5.5V input power supply. |
111 | Ethernet | ENET2-RXD0 | GPIO_AD_B1_14 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
112 | Power | +5VIN | - | +4.0-5.5V input power supply. |
113 | NC | - | - | Not internally connected. |
114 | Ethernet | ENET1-TXEN | GPIO_B1_09 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
115 | Power | GND | - | - |
116 | Power | GND | - | - |
117 | Ethernet | ENET2-CRS-DV | GPIO_AD_B1_15 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
118 | Ethernet | ENET1-TX-CLK | GPIO_B1_10 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels.In series is connected 10R resistor. |
119 | Ethernet | ENET2-TXD1 | GPIO_AD_B1_13 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
120 | Power | GND | - | - |
121 | Ethernet | ENET2-TXEN | GPIO_AD_B1_12 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
122 | Ethernet | ENET1-TXD0 | GPIO_B1_07 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
123 | Ethernet | ENET2-TXD0 | GPIO_B1_15 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
124 | Ethernet | ENET1-TXD1 | GPIO_B1_08 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
125 | Power | GND | - | - |
126 | Ethernet | ENET1-RXER | GPIO_B1_11 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
127 | Power | GND | - | - |
128 | Power | GND | - | - |
129 | LCD | LCD-DATA21 | GPIO_B1_01 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
130 | Power | GND | - | - |
131 | LCD | LCD-DATA22 | GPIO_B1_02 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
132 | Power | GND | - | - |
133 | LCD | LCD-DATA17 | GND | Internally connected to GND. |
134 | LCD | LCD-DATA23 | GPIO_B1_03 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
135 | Power | GND | - | - |
136 | Power | GND | - | - |
137 | LCD | LCD_DATA18 | GND | Internally connected to GND. |
138 | LCD | LCD-DATA19 | GPIO_B0_15 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
139 | LCD | LCD-DATA13 | GPIO_B0_12 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
140 | LCD | LCD-DATA20 | GPIO_B1_00 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
141 | LCD | LCD-DATA14 | GPIO_B0_13 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
142 | LCD | LCD-DATA15 | GPIO_B0_14 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
143 | LCD | LCD_DATA8 | GND | Internally connected to GND. |
144 | LCD | LCD-DATA16 | GND | Internally connected to GND. |
145 | LCD | LCD-DATA9 | GND | Internally connected to GND. |
146 | Power | GND | - | - |
147 | Power | GND | - | - |
148 | LCD | LCD-DATA11 | GPIO_B0_10 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
149 | LCD | LCD-DATA5 | GPIO_B0_06 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
150 | LCD | LCD-DATA12 | GPIO_B0_11 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
151 | LCD | LCD-DATA6 | GPIO_B0_07 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
152 | LCD | LCD-DATA10 | GPIO_B0_09 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
153 | LCD | LCD-DATA0 | GND | Internally connected to GND. |
154 | LCD | LCD-DATA3 | GPIO_B0_04 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
155 | LCD | LCD-DATA1 | GND | Internally connected to GND. |
156 | Power | GND | - | - |
157 | LCD | LCD-RESET | GPIO_AD_B1_08 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
158 | LCD | LCD-DATA4 | GPIO_B0_05 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
159 | Power | GND | - | - |
160 | LCD | LCD-HSYNC | GPIO_B0_02 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
161 | LCD | LCD-CLK | GPIO_B0_00 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
162 | LCD | LCD-VSYNC | GPIO_B0_03 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
163 | LCD | LCD-ENABLE | GPIO_B0_01 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
164 | LCD | LCD-DATA2 | GND | Internally connected to GND. |
165 | Power | GND | - | - |
166 | LCD | LCD-DATA7 | GPIO_B0_08 | LCD interface signal or multifunction GPIO with 3.3V logic levels.
By default this pin is pulled-down with 10k resistor. |
167 | SDIO | SDIO1-D0 | GPIO_SD_B0_02 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
168 | NC | - | - | Not internally connected. |
169 | SDIO | SDIO1-D3 | GPIO_SD_B0_05 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
170 | NC | - | - | Not internally connected. |
171 | SDIO | SDIO1-D1 | GPIO_SD_B0_03 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
172 | NC | - | - | Not internally connected. |
173 | SDIO | SDIO1-CMD | GPIO_SD_B0_00 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
174 | NC | - | - | Not internally connected. |
175 | SDIO | SDIO1-D2 | GPIO_SD_B0_04 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
176 | NC | - | - | Not internally connected. |
177 | Power | GND | - | - |
178 | NC | - | - | Not internally connected. |
179 | SDIO | SDIO1-CLK | GPIO_SD_B0_01 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
180 | NC | - | - | Not internally connected. |
181 | Power | GND | - | - |
182 | NC | - | - | Not internally connected. |
183 | NC | - | - | Not internally connected. |
184 | Power | GND | - | - |
185 | Power | GND | - | - |
186 | NC | - | Not internally connected. | |
187 | NC | - | Not internally connected. | |
188 | NC | - | - | Not internally connected. |
189 | Power | GND | - | - |
190 | NC | - | - | Not internally connected. |
191 | NC | - | - | Not internally connected. |
192 | NC | - | - | Not internally connected. |
193 | NC | - | - | Not internally connected. |
194 | NC | - | - | Not internally connected. |
195 | NC | - | - | Not internally connected. |
196 | NC | - | - | Not internally connected. |
197 | NC | - | - | Not internally connected. |
198 | NC | - | - | Not internally connected. |
199 | Power | GND | - | - |
200 | Power | GND | - | - |