StarCB-6ULL-STD: Difference between revisions
From SomLabs Wiki
Created page with "{{Product|category1=SOM|category2=|image=StarCB-6ULL-STD.png |cb_som_compatibility=StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7) |cb_som_socket=Square b2b (StarSO..." |
No edit summary |
||
| Line 22: | Line 22: | ||
*[[StarCB-6ULL-STD Datasheet and Pinout|StarCB-6ULL-STD Datasheet and Pinout]] | *[[StarCB-6ULL-STD Datasheet and Pinout|StarCB-6ULL-STD Datasheet and Pinout]] | ||
__WP_Files(4532) | __WP_Files(4532) | ||
}} | |||
}} | |||
}} | }} | ||
Revision as of 11:38, 23 January 2025
| StarCB-6ULL-STD |
|
StarCB-6ULL-STD is a carrier board for the StarSOM-6ULL family of computer-on-modules which are powered by NXP iMX6ULL MPU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, LCD, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via two board-to-boarf high speed connectors. |
| Specifications |
| SOM compatibility | StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7) |
| SOM socket | Square b2b (StarSOM-6ULL format) |
| Display connector | Parallel RGB 24 bit (FPC50) |
| Network | 1x Ethernet 10/100Mbit/s, RJ45 |
| USB | USB 2.0 host x1 USB-OTG 2.0 x1 |
| Console interface | USB/UART |
| Switches | 4/1 (user/system) |
| LEDs | 4/2/1 (user/system/diagnostic) |
| Connectors | QSPI (dual row 2x5 gold-pin) GPIOs (dual row 2x20 gold-pin) |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 130mm x 90mm x 20mm |
