Personal tools

VisionSOM-6ULL Datasheet and Pinout: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
← Older edit
 
(19 intermediate revisions by 2 users not shown)
Line 5: Line 5:


The VisionSOM-6ULL family is a SODIMM-sized SoM based on the NXP i.MX6 ULL application processor which features an advanced implementation of a single ARM Cortex-A7 core (at speeds up to 900MHz).
The VisionSOM-6ULL family is a SODIMM-sized SoM based on the NXP i.MX6 ULL application processor which features an advanced implementation of a single ARM Cortex-A7 core (at speeds up to 900MHz).
 
The VisionSOM-6ULL is a low power highly integrated SoM (System on Module) featuring high computation power and 802.11b/g/n Wi-Fi and Bluetooth v4.2 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-6ULL provides a variety memory configuration including flexible range of DDR3L, NAND, eMMC and SD memory card that meets our customers requirements.
The VisionSOM-6ULL is a low power highly integrated SoM (System on Module) featuring high computation power and 802.11b/g/n Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-6ULL provides a variety memory configuration including flexible range of DDR3L, NAND, eMMC and SD memory card that meets our customers requirements.


The SoM supports connections to a variety of interfaces: two high-speed USB on-the-go with PHY, dual Ethernet, audio, display with touch panel and serial interfaces. In addition, the system supports industrial grade targeting embedded application.
The SoM supports connections to a variety of interfaces: two high-speed USB on-the-go with PHY, dual Ethernet, audio, display with touch panel and serial interfaces. In addition, the system supports industrial grade targeting embedded application.
Line 20: Line 20:
* Cash Register
* Cash Register
* 2D barcode scanners and printers
* 2D barcode scanners and printers
* Smart grid Infrastructure
* Smart grid infrastructure
* IoT gateways
* IoT gateways
* Residential getaways
* Residential gateways
* Machine vision equipment
* Machine vision equipment
* Robotics
* Robotics
Line 32: Line 32:
* Up to 512MB SDRAM DDR3L
* Up to 512MB SDRAM DDR3L
* Up to 512MB NAND Flash / 32GB eMMC / uSD memory card
* Up to 512MB NAND Flash / 32GB eMMC / uSD memory card
* Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.2+EDR module
* Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v5.2 module
* Power-efficient and cost-optimized solution
* Power-efficient and cost-optimized solution
* Ideal for industrial IoT and embedded applications
* Ideal for industrial IoT and embedded applications
Line 155: Line 155:
       "values" : [
       "values" : [
                     {"value" : "0SF", "description" : "No Special Features"},
                     {"value" : "0SF", "description" : "No Special Features"},
                     {"value" : "1WB", "description" : "Built-in 802.11b/g/n Wi-Fi and Bluetooth v4.2+EDR Module"}
                     {"value" : "1WB", "description" : "Built-in 802.11b/g/n Wi-Fi and Bluetooth v5.1 Module"}
                 ]
                 ]
     },
     },
Line 168: Line 168:
       "values" : [
       "values" : [
                     {"value" : "C", "description" : "Consumer: 0 to +70 C "},
                     {"value" : "C", "description" : "Consumer: 0 to +70 C "},
                     {"value" : "SI", "description" : "Industrial with Wi-Fi: -30 to +70 C"},
                     {"value" : "E", "description" : "Extended with Wi-Fi: -25 to +70 C"},
                     {"value" : "I", "description" : "Industrial: -40 to +85 C"}
                     {"value" : "I", "description" : "Industrial: -40 to +85 C"}
                 ]
                 ]
Line 215: Line 215:
| Industrial range w/o WiFi module
| Industrial range w/o WiFi module
|-
|-
| <center>-30…+70</center>
| <center>-25…+70</center>
| Industrial range with WiFi module
| Industrial range with WiFi module
|-
|-
Line 242: Line 242:
| V
| V
|-
|-
| +5VIN
| Total Supply Current<sup>1</sup>
| -
| -
| Total Supply Current<sup>1</sup>
| 115
| x
| 155
| x
| mA
| x
| A
|-
|-
| VGPIO
| VGPIO
Line 288: Line 288:
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.<br />
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.<br />


== SOM pinout ==
== SOM pinout (v1.1 and v1.2) ==
Important notes <br />
Important notes <br />
1. Detail pin configurations description you can find, edit and arrange in dedicated MEX files (with free "i.MX Pin Tool" configurational tool):
1. Detail pin configurations description you can find, edit and arrange in dedicated MEX files (with free "i.MX Pin Tool" configurational tool):
Line 294: Line 294:
[https://somlabs.com/wp-content/uploads/SoMLabs-VisionSoM-6ULL-NAND-SD-eMMC-noWIFI-extSDIO1.zip VisionSOM-6ULL without WiFi module and with SDIO1 on edge connector] or  
[https://somlabs.com/wp-content/uploads/SoMLabs-VisionSoM-6ULL-NAND-SD-eMMC-noWIFI-extSDIO1.zip VisionSOM-6ULL without WiFi module and with SDIO1 on edge connector] or  
[https://somlabs.com/wp-content/uploads/SoMLabs-VisionSoM-6ULL-NAND-SD-eMMC-WiFi.zip VisionSOM-6ULL witht WiFi module on-board]. <br />
[https://somlabs.com/wp-content/uploads/SoMLabs-VisionSoM-6ULL-NAND-SD-eMMC-WiFi.zip VisionSOM-6ULL witht WiFi module on-board]. <br />
2. LCD_DATAxx pins are internally used for boot sequence configuration. We recommend to use LCD_DATAxx lines as outputs or using eFuse boot configuration.
2. In module version v1.1 the LCD-DATAxx pins are internally used for boot sequence configuration. We recommend to use LCD-DATAxx lines as outputs or using eFuse boot configuration. <br />
3. In module version v1.2 equipped with NAND Flash the LCD-DATAxx pins are internally used for boot sequence configuration (like in v1.1). We recommend to use LCD-DATAxx lines as outputs or using eFuse boot configuration. <br />
4. In module version v1.2 equipped with eMMC the boot sequence configuration is stored in eFuse (OTP memory in MPU). All LCD-DATAxx pins can be used freely like all others GPIOs. <br />


{| class="wikitable"
{| class="wikitable"
Line 1,480: Line 1,482:


| Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
| Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
Connected to WD_G-B line.
Connected to WDOG-B line.
|-
|-
| 110
| 110
Line 1,786: Line 1,788:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 130
| 130
Line 1,816: Line 1,818:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 132
| 132
Line 1,844: Line 1,846:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 134
| 134
Line 1,867: Line 1,869:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 135
| 135
Line 1,904: Line 1,906:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 138
| 138
Line 1,927: Line 1,929:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 139
| 139
Line 1,948: Line 1,950:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 140
| 140
Line 1,971: Line 1,973:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 141
| 141
Line 1,992: Line 1,994:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 142
| 142
Line 2,013: Line 2,015:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 143
| 143
Line 2,034: Line 2,036:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 144
| 144
Line 2,055: Line 2,057:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 145
| 145
Line 2,076: Line 2,078:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 146
| 146
Line 2,111: Line 2,113:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 149
| 149
Line 2,132: Line 2,134:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 150
| 150
Line 2,153: Line 2,155:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 151
| 151
Line 2,174: Line 2,176:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 152
| 152
Line 2,195: Line 2,197:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 153
| 153
Line 2,216: Line 2,218:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 154
| 154
Line 2,237: Line 2,239:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 155
| 155
Line 2,258: Line 2,260:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 156
| 156
Line 2,306: Line 2,308:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 159
| 159
Line 2,415: Line 2,417:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 165
| 165
Line 2,443: Line 2,445:


| LCD interface signal or universal GPIO with 3.3V logic levels.
| LCD interface signal or universal GPIO with 3.3V logic levels.
Internally used as boot configuration input (Note 2).
Internally used as boot configuration input (Notes 2, 3 & 4).
|-
|-
| 167
| 167
Line 2,462: Line 2,464:


| SDIO interface signal or universal GPIO with 3.3V logic levels.
| SDIO interface signal or universal GPIO with 3.3V logic levels.
Used by WiFi/BT module if built-in SOM.
Built-in internal pull-up 10k.
|-
|-
| 168
| 168
Line 2,489: Line 2,496:


| SDIO interface signal or universal GPIO with 3.3V logic levels.
| SDIO interface signal or universal GPIO with 3.3V logic levels.
Used by WiFi/BT module if built-in SOM.
Built-in internal pull-up 10k.
|-
|-
| 170
| 170
Line 2,514: Line 2,527:


| SDIO interface signal or universal GPIO with 3.3V logic levels.
| SDIO interface signal or universal GPIO with 3.3V logic levels.
Used by WiFi/BT module if built-in SOM.
Built-in internal pull-up 10k.
|-
|-
| 172
| 172
Line 2,541: Line 2,560:


| SDIO interface signal or universal GPIO with 3.3V logic levels.
| SDIO interface signal or universal GPIO with 3.3V logic levels.
Used by WiFi/BT module if built-in SOM.
Built-in internal pull-up 10k.
|-
|-
| 174
| 174
Line 2,568: Line 2,593:


| SDIO interface signal or universal GPIO with 3.3V logic levels.
| SDIO interface signal or universal GPIO with 3.3V logic levels.
Used by WiFi/BT module if built-in SOM.
Built-in internal pull-up 10k.
|-
|-
| 176
| 176
Line 2,607: Line 2,638:


| SDIO interface signal or universal GPIO with 3.3V logic levels.
| SDIO interface signal or universal GPIO with 3.3V logic levels.
Used by WiFi/BT module if built-in SOM.
|-
|-
| 180
| 180

Latest revision as of 12:55, 31 October 2023

VisionSOM-6ULL Datasheet and Pinout

General description

The VisionSOM-6ULL family is a SODIMM-sized SoM based on the NXP i.MX6 ULL application processor which features an advanced implementation of a single ARM Cortex-A7 core (at speeds up to 900MHz).

The VisionSOM-6ULL is a low power highly integrated SoM (System on Module) featuring high computation power and 802.11b/g/n Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-6ULL provides a variety memory configuration including flexible range of DDR3L, NAND, eMMC and SD memory card that meets our customers requirements.

The SoM supports connections to a variety of interfaces: two high-speed USB on-the-go with PHY, dual Ethernet, audio, display with touch panel and serial interfaces. In addition, the system supports industrial grade targeting embedded application.

SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.

Applications

  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid infrastructure
  • IoT gateways
  • Residential gateways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment

Features

  • Powered by NXP i.MX 6ULL application processor
  • Core clock up to 900MHz
  • Up to 512MB SDRAM DDR3L
  • Up to 512MB NAND Flash / 32GB eMMC / uSD memory card
  • Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v5.2 module
  • Power-efficient and cost-optimized solution
  • Ideal for industrial IoT and embedded applications
  • Integrated security features

Pictures of SOM versions

Version Photo
eMMC
micro-SD
NAND Flash
Wi-Fi is available for all memory variants configurations.

Ordering info

SLSN6CpuType_Clock_RamSize_FlashSize_SF_TEMP_V
SLSProduct type
SLS - System on Module
NSOM Name
1 - VisionSOM SODIMM200
6CPU Family
6 - i.MX6
CpuTypeCPU Type
Y0 - i.MX6 ULL Y0
Y1 - i.MX6 ULL Y1
Y2 - i.MX6 ULL Y2
ClockCPU Clock Speed
528C - 528MHz
792C - 792MHz
900C - 900MHz
RamSizeDDR3 RAM Size
64R - 64MB
128R - 128MB
256R - 256MB
512R - 512MB
FlashSizeFlash Size Type and Density
SD - MicroSD connector
128N - 128MB NAND
256N - 256MB NAND
512N - 512MB NAND
04GE - 4GB eMMC
08GE - 8GB eMMC
16GE - 16GB eMMC
32GE - 32GB eMMC
SFSpecial Features
0SF - No Special Features
1WB - Built-in 802.11b/g/n Wi-Fi and Bluetooth v5.1 Module
TEMPOperating Temperature
C - Consumer: 0 to +70 C
E - Extended with Wi-Fi: -25 to +70 C
I - Industrial: -40 to +85 C
VSOM Version
A - Version 1.0
B - Version 1.1

Block Diagram

Operating ranges

Parameter Value Unit Comment
Power Supply
5.0
V
 Connected to +5VIN SODIMM pin
Input GPIO voltage
3.3
V
 -
Environment temperature1
-40…+85
 oC Industrial range w/o WiFi module
-25…+70
 Industrial range with WiFi module
0…+70
 Consumer range

Note:
1. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).

Electrical parameters

SOM
signal name 		Parameter Value Units
Min. Typ. Max.
+5VIN Supply Voltage 4.0 5.0 5.5 V
+5VIN Total Supply Current1 - 115 155 mA
VGPIO GPIO Input Voltage 0 3.3 3.62 V
+3.3VOUT SOM Internal LDO
Output Current 		- - 0.5 A
USB-OTGx-VBUS USB Supply 4.40 - 5.5 V
VDD-COIN-3V SNVS Backup
Battery Supply 		2.66 - 3.6 V
- ADC Inputs Voltage 0 - 3.3 V

Notes:
1. Excluding external load connected to +3.3VOUT lines.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.

SOM pinout (v1.1 and v1.2)

Important notes
1. Detail pin configurations description you can find, edit and arrange in dedicated MEX files (with free "i.MX Pin Tool" configurational tool): VisionSOM-6ULL without WiFi module and no SDIO1 on edge connector or VisionSOM-6ULL without WiFi module and with SDIO1 on edge connector or VisionSOM-6ULL witht WiFi module on-board.
2. In module version v1.1 the LCD-DATAxx pins are internally used for boot sequence configuration. We recommend to use LCD-DATAxx lines as outputs or using eFuse boot configuration.
3. In module version v1.2 equipped with NAND Flash the LCD-DATAxx pins are internally used for boot sequence configuration (like in v1.1). We recommend to use LCD-DATAxx lines as outputs or using eFuse boot configuration.
4. In module version v1.2 equipped with eMMC the boot sequence configuration is stored in eFuse (OTP memory in MPU). All LCD-DATAxx pins can be used freely like all others GPIOs.

SODIMM PIN Functional

domain

Function name i.MX6 UltraLite/

ULL Pad Name

Alternate functions Description (refer to i.MX6 UltraLite/ULL manuals for details)
1 Power GND - - -
2 Power GND - - -
3 Ctrl PMIC-STBY-REQ CCM_PMIC_STBY_REQ - Output, leave open if not used.
4 Ctrl MX6-POR-B - - External warm reset input, active L.
5 Ctrl PMIC-ON-REQ SNVS_PMIC_ON_REQ - Output, leave open if not used.
6 Power VDD-SNVS-3V3 VDD_SNVS_IN - SNVS backup power supply must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. Internally connected to +3.3V, leave open.
7 BOOT BOOT-MODE1 BOOT_MODE1 GPIO5_IO11 BOOT-MODE1 BOOT-MODE0

00 boot from fuses (default)

01 serial downloader

10 internal boot

11 reserved

8 Power VDD-COIN-3V VDD_SNVS_IN - Optional external coin battery for SNVS power domain, must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state.

Leave open if not used.

9 BOOT BOOT-MODE0 BOOT_MODE0 GPIO5_IO10 BOOT-MODE1 BOOT-MODE0

00 boot from fuses (default)

01 serial downloader

10 internal boot

11 reserved

10 GPIO-SNVS SNVS-TAMPER9 SNVS_TAMPER9 GPIO5_IO09 Tamper input (SNVS power domain) or GPIO 3.3V.
11 USB USB-OTG2-VBUS USB_OTG2_VBUS - +5V USB bus. Leave open if not used.
12 GPIO-SNVS SNVS-TAMPER5 SNVS_TAMPER5 GPIO5_IO05 Tamper input (SNVS power domain) or GPIO 3.3V.
13 USB USB-OTG1-VBUS USB_OTG1_VBUS - +5V USB bus. Leave open if not used.
14 Ctrl ONOFF SRC_RESET_B Input for power interrupt generation. Leave open if not used.
15 Power GND - - -
16 Ctrl POR-B POR_B - Cold reset negative logic input resets all modules and logic in the IC.

May be used in addition to internally generated power on reset signal (logical AND, both internal and external signals are considered active low).

17 Power GND - - -
18 GPIO-SNVS SNVS-TAMPER8 SNVS_TAMPER8 GPIO5_IO08 Tamper input (SNVS power domain) or GPIO 3.3V.
19 USB USB-OTG2-DP USB_OTG2_DP - Leave open if not used.
20 Power GND - - -
21 USB USB-OTG2-DN USB_OTG2_DN - Leave open if not used.
22 Power GND - - -
23 Power GND - - -
24 GPIO-SNVS SNVS-TAMPER7 SNVS_TAMPER7 GPIO5_IO07 Tamper input (SNVS power domain) or GPIO 3.3V.
25 USB USB-OTG1-DP USB_OTG1_DP - Leave open if not used.
26 Power GND - - -
27 USB USB-OTG1-DN USB_OTG1_DN - Leave open if not used.
28 Power GND - - -
29 Power GND - - -
30 GPIO-SNVS SNVS-TAMPER4 SNVS_TAMPER4 GPIO5_IO04 Tamper input (SNVS power domain) or GPIO 3.3V.
31 USB nUSB-OTG-CHD USB_OTG1_CHD_B - Leave open if not used.
32 GPIO-SNVS SNVS-TAMPER1 SNVS_TAMPER1 GPIO5_IO01 Tamper input (SNVS power domain) or GPIO 3.3V.
33 JTAG JTAG-MOD JTAG_MOD - Leave open if not used.
34 GPIO-SNVS SNVS-TAMPER3 SNVS_TAMPER3 GPIO5_IO03 Tamper input (SNVS power domain) or GPIO 3.3V.
35 Power GND - - -
36 GPIO-SNVS SNVS-TAMPER0 SNVS_TAMPER0 GPIO5_IO00 Tamper input (SNVS power domain) or GPIO 3.3V.
37 CLK1-N CCM_CLK1_N - General purpose differential high speed clock input/output.

Leave open if not used.

38 Power GND - - -
39 CLK1-P CCM_CLK1_P - General purpose differential high speed clock input/output.

Leave open if not used.

40 Power GND - - -
41 Power GND - - -
42 GPIO-SNVS SNVS-TAMPER6 SNVS_TAMPER6 GPIO5_IO06 Tamper input (SNVS power domain) or GPIO 3.3V.
43 JTAG JTAG-TDI JTAG_TDI - JTAG TDI input line or GPIO.
44 GPIO-SNVS SNVS-TAMPER2 SNVS_TAMPER2 GPIO5_IO02 Tamper input (SNVS power domain) or GPIO 3.3V.
45 GPIO GPIO-8 GPIO1_IO08 PWM1_OUT

WDOG1_WDOG_B

SPDIF_OUT

CSI_VSYNC

USDHC2_VSELECT

CCM_PMIC_RDY

UART5_RTS_B

Universal GPIO with 3.3V logic levels.
46 JTAG JTAG-TMS JTAG_TMS - JTAG TMS input line or GPIO.
47 GPIO GPIO-4 GPIO1_IO04 ENET1_REF_CLK1

PWM3_OUT

USB_OTG1_PWR

USDHC1_RESET_B

ENET2_1588_EVENT0_IN

UART5_TX

Universal GPIO with 3.3V logic levels.
48 JTAG JTAG-nTRST JTAG_TRST_B - JTAG TRST input line (active L) or GPIO.
49 GPIO GPIO-5 GPIO1_IO05 ENET2_REF_CLK2

PWM4_OUT

ANATOP_OTG2_ID

CSI_FIELD

USDHC1_VSELECT

ENET2_1588_EVENT0_OUT

UART5_RX

Universal GPIO with 3.3V logic levels.

WLAN-ENABLE in SOM with WiFi/BT module

50 Power GND - - -
51 Power GND - - -
52 JTAG JTAG-TDO JTAG_TDO - JTAG TDO output line or GPIO.
53 GPIO GPIO-7 GPIO1_IO07 ENET1_MDC

ENET2_MDC

USB_OTG_HOST_MODE

CSI_PIXCLK

USDHC2_CD_BCCM_STOP

UART1_RTS_B

Universal GPIO with 3.3V logic levels.
54 JTAG JTAG-TCK JTAG_TCK - JTAG TCK input line or GPIO.

Connected to JTAG-TCK line (via separating resistor 10k).

55 GPIO GPIO-3 GPIO1_IO03 I2C1_SDA

GPT1_COMPARE3

USB_OTG2_OC

USDHC1_CD_B

CCM_DI0_EXT_CLK

SRC_TESTER_ACK

Universal GPIO with 3.3V logic levels.
56 GPIO GPIO-9 GPIO1_IO09 PWM2_OUT

WDOG1_WDOG_ANY

SPDIF_IN

CSI_HSYNC

USDHC2_RESET_B

USDHC1_RESET_B

UART5_CTS_B

Universal GPIO with 3.3V logic levels.
57 COM-GPIO UART1-TXD UART1_TX_DATA ENET1_RDATA02

I2C3_SCL

CSI_DATA02

GPT1_COMPARE1

GPIO1_IO16

SPDIF_OUT

UART5_TX

Default: UART1 TxD output or universal GPIO with 3.3V logic levels.
58 GPIO GPIO-2 GPIO1_IO02 I2C1_SCL

GPT1_COMPARE2

USB_OTG2_PWR

ENET1_REF_CLK_25M

USDHC1_WPS

DMA_EXT_EVENT00

SRC_ANY_PU_RESET

UART1_TX

Universal GPIO with 3.3V logic levels.
59 Power GND - - -
60 Power GND - - -
61 GPIO GPIO-6 GPIO1_IO06 ENET1_MDIO

ENET2_MDIO

USB_OTG_PWR_WAKE

CSI_MCLK

USDHC2_WPCCM_WAIT

CCM_REF_EN_B

UART1_CTS_B

Universal GPIO with 3.3V logic levels.
62 GPIO GPIO-1 GPIO1_IO01 I2C2_SDA

GPT1_COMPARE1

USB_OTG1_OC

ENET2_REF_CLK2

MQS_LEFT

ENET1_1588_EVENT0_OUT

SRC_EARLY_RESET

WDOG1_WDOG_B

Universal GPIO with 3.3V logic levels.
63 COM-GPIO UART1-RXD UART1_RX_DATA ENET1_RDATA03

I2C3_SDA

CSI_DATA03

GPT1_CLK

GPIO1_IO17

SPDIF_IN

UART5_RX

Default: UART1 RxD input or universal GPIO with 3.3V logic levels.
64 GPIO GPIO-0 GPIO1_IO00 I2C2_SCL

GPT1_CAPTURE1

ANATOP_OTG1_ID

ENET1_REF_CLK1

MQS_RIGHT

ENET1_1588_EVENT0_IN

SRC_SYSTEM_RESET

WDOG3_WDOG_B

Universal GPIO with 3.3V logic levels.
65 COM-GPIO UART2-TXD UART2_TX_DATA ENET1_TDATA02

I2C4_SCL

CSI_DATA06

GPT1_CAPTURE1

GPIO1_IO20

ECSPI3_SS0

Default: UART2 TxD output or universal GPIO with 3.3V logic levels.
66 COM-GPIO UART1-CTS UART1_CTS_B ENET1_RX_CLK

USDHC1_WP

CSI_DATA04

ENET2_1588_EVENT1_IN

GPIO1_IO18

USDHC2_WP

UART5_CTS_B

Default: UART1 CTS output or universal GPIO with 3.3V logic levels.
67 COM-GPIO UART2-RXD UART2_RX_DATA ENET1_TDATA03

I2C4_SDA

CSI_DATA07

GPT1_CAPTURE2

GPIO1_IO21

SJC_DONE

ECSPI3_SCLK

Default: UART2 RxD input or universal GPIO with 3.3V logic levels.
68 COM-GPIO UART5-RXD UART5_RX_DATA ENET2_COL

I2C2_SDA

CSI_DATA15

CSU_CSU_INT_DEB

GPIO1_IO31

ECSPI2_MISO

EPDC_PWRCTRL03

Default: UART5 RxD input or universal GPIO with 3.3V logic levels.
69 COM-GPIO UART3-TXD UART3_TX_DATA ENET2_RDATA02

CSI_DATA01

UART2_CTS_B

GPIO1_IO24

SJC_JTAG_ACT

Default: UART3 TxD input or universal GPIO with 3.3V logic levels.
70 Power GND - - -
71 Power GND - - -
72 COM-GPIO UART2-CTS UART2_CTS_B ENET1_CRS

FLEXCAN2_TXCSI_DATA08

GPT1_COMPARE2

GPIO1_IO22

SJC_DE_B

ECSPI3_MOSI

Default: UART2 CTS output or universal GPIO with 3.3V logic levels.
73 COM-GPIO UART3-RXD UART3_RX_DATA ENET2_RDATA03

CSI_DATA00

UART2_RTS_B

GPIO1_IO25

EPIT1_OUT

Default: UART3 RxD input or universal GPIO with 3.3V logic levels.
74 COM-GPIO UART1-RTS UART1_RTS_B ENET1_TX_ER

USDHC1_CD_BCSI_DATA05

ENET2_1588_EVENT1_OUT

GPIO1_IO19

USDHC2_CD_B

UART5_RTS_B

Default: UART1 RTS input or universal GPIO with 3.3V logic levels.
75 COM-GPIO UART4-TXD UART4_TX_DATA ENET2_TDATA02

I2C1_SCL

CSI_DATA12

CSU_CSU_ALARM_AUT02

GPIO1_IO28

ECSPI2_SCLK

Default: UART4 TxD output or universal GPIO with 3.3V logic levels.
76 COM-GPIO UART3-CTS UART3_CTS_B ENET2_RX_CLK

FLEXCAN1_TX

CSI_DATA10

ENET1_1588_EVENT1_IN

GPIO1_IO26

EPIT2_OUT

Default: UART3 CTS output or universal GPIO with 3.3V logic levels.
77 COM-GPIO UART4-RXD UART4_RX_DATA ENET2_TDATA03

I2C1_SDA

CSI_DATA13

CSU_CSU_ALARM_AUT01

GPIO1_IO29

ECSPI2_SS0

EPDC_PWRCTRL01

Default: UART4 RxD input or universal GPIO with 3.3V logic levels.
78 COM-GPIO UART2-RTS UART2_RTS_B ENET1_COL

FLEXCAN2_RX

CSI_DATA09

GPT1_COMPARE3

GPIO1_IO23

SJC_FAIL

ECSPI3_MISO

Default: UART2 RTS input or universal GPIO with 3.3V logic levels.
79 COM-GPIO UART5-TXD UART5_TX_DATA GPIO1_IO30

ECSPI2_MOSI

EPDC_PWRCTRL02

ENET2_CRS

I2C2_SCL

CSI_DATA14

CSU_CSU_ALARM_AUT00

Default: UART5 TxD output or universal GPIO with 3.3V logic levels.
80 COM-GPIO UART3-RTS UART3_RTS_B ENET2_TX_ER

FLEXCAN1_RX

CSI_DATA11

ENET1_1588_EVENT1_OUT

GPIO1_IO27

WDOG1_WDOG_B

Default: UART3 RTS input or universal GPIO with 3.3V logic levels.
81 Power GND - - -
82 Power GND - - -
83 NC - - - -
84 Power GND - - -
85 Power +3.3VOUT - - +3.3V generated by SOM's LDO.
86 NC - - - -
87 Power +3.3VOUT - - +3.3V generated by SOM's LDO.
88 Power +3.3VOUT - - +3.3V generated by SOM's LDO.
89 Power +3.3VOUT - - +3.3V generated by SOM's LDO.
90 Power +3.3VOUT - - +3.3V generated by SOM's LDO.
91 Power +3.3VOUT - - +3.3V generated by SOM's LDO.
92 Power +3.3VOUT - - +3.3V generated by SOM's LDO.
93 Power +3.3VOUT - - +3.3V generated by SOM's LDO.
94 NC - - - -
95 NC - - - -
96 Power +5VIN - - +4.0-5.5V input power supply.
97 Ethernet ENET1-RXD0 ENET1_RX_DATA0 UART4_RTS_B

PWM1_OUT

CSI_DATA16

FLEXCAN1_TX

GPIO2_IO00

KPP_ROW00

USDHC1_LCTL

EPDC_SDCE04

Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
98 Power +5VIN - - +4.0-5.5V input power supply.
99 Ethernet ENET1-RXD1 ENET1_RX_DATA1 UART4_CTS_B

PWM2_OUT

CSI_DATA17

FLEXCAN1_RX

GPIO2_IO01

KPP_COL00

USDHC2_LCTL

EPDC_SDCE05

Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
100 Power +5VIN - - +4.0-5.5V input power supply.
101 Ethernet ENET1-CRS-DV ENET1_RX_EN UART5_RTS_B

CSI_DATA18

FLEXCAN2_TX

GPIO2_IO02

KPP_ROW01

USDHC1_VSELECT

EPDC_SDCE06

Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
102 Power +5VIN +4.0-5.5V input power supply.
103 Power GND - - -
104 Power +5VIN +4.0-5.5V input power supply.
105 Ethernet ENET2-TX-CLK ENET2_TX_CLK UART8_CTS_B

ECSPI4_MISO

ENET2_REF_CLK2

GPIO2_IO14

KPP_ROW07

ANATOP_OTG2_ID

EPDC_SDDO14

Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.

10R resistor connected in series.

106 Power +5VIN +4.0-5.5V input power supply.
107 Power GND - - -
108 Power +5VIN +4.0-5.5V input power supply.
109 Ethernet ENET2-RXER ENET2_RX_ER UART8_RTS_B

ECSPI4_SS0

EIM_ADDR25

GPIO2_IO15

KPP_COL07

WDOG1_WDOG_ANY

EPDC_SDDO15

Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.

Connected to WDOG-B line.

110 Power +5VIN - - +4.0-5.5V input power supply.
111 Ethernet ENET2-RXD0 ENET2_RX_DATA0 UART6_TX

I2C3_SCL

ENET1_MDIO

GPIO2_IO08

KPP_ROW04

USB_OTG1_PWR

EPDC_SDDO08

Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
112 Power +5VIN - - +4.0-5.5V input power supply.
113 Ethernet ENET2-RXD1 ENET2_RX_DATA1 UART6_RX

I2C3_SDA

ENET1_MDC

GPIO2_IO09

KPP_COL04

USB_OTG1_OCE

PDC_SDDO09

Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
114 Ethernet ENET1-TXEN ENET1_TX_EN UART6_RTS_B

PWM6_OUT

CSI_DATA21

ENET2_MDC

GPIO2_IO05

KPP_COL02

WDOG2_WDOG_RST_B_DEB

EPDC_SDCE09

Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
115 Power GND - - -
116 Power GND - - -
117 Ethernet ENET2-CRS-DV ENET2_RX_EN UART7_TX

I2C4_SCL

EIM_ADDR26

GPIO2_IO10

KPP_ROW05

ENET1_REF_CLK_25M

EPDC_SDDO10

Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
118 Ethernet ENET1-TX-CLK ENET1_TX_CLK UART7_CTS_B

PWM7_OUT

CSI_DATA22

ENET1_REF_CLK1

GPIO2_IO06

KPP_ROW03

GPT1_CLK

EPDC_SDOED

Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.

10R resistor connected in series.

119 Ethernet ENET2-TXD1 ENET2_TX_DATA1 UART8_TX

ECSPI4_SCLK

EIM_EB_B03

GPIO2_IO12

KPP_ROW06

USB_OTG2_PWR

EPDC_SDDO12

Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
120 Power GND - - -
121 Ethernet ENET2-TXEN ENET2_TX_EN UART8_RX

ECSPI4_MOSI

EIM_ACLK_FREERUN

GPIO2_IO13

KPP_COL06

USB_OTG2_OC

EPDC_SDDO13

122 Ethernet ENET1-TXD0 ENET1_TX_DATA0 UART5_CTS_B

CSI_DATA19

FLEXCAN2_RX

GPIO2_IO03

KPP_COL01

USDHC2_VSELECT

EPDC_SDCE07

Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
123 Ethernet ENET2-TXD0 ENET2_TX_DATA0 UART7_RX

I2C4_SDA

EIM_EB_B02

GPIO2_IO11

KPP_COL05

EPDC_SDDO11

Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
124 Ethernet ENET1-TXD1 ENET1_TX_DATA1 UART6_CTS_B

PWM5_OUT

CSI_DATA20

ENET2_MDIO

GPIO2_IO04

KPP_ROW02

WDOG1_WDOG_RST_B_DEB

EPDC_SDCE08

Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
125 Power GND - - -
126 Ethernet ENET1-RXER ENET1_RX_ER UART7_RTS_B

PWM8_OUT

CSI_DATA23

EIM_CRE

GPIO2_IO07

KPP_COL03

GPT1_CAPTURE2

EPDC_SDOEZ

Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
127 Power GND - - -
128 Power GND - - -
129 LCD LCD-DATA21 LCD_DATA21 UART8_RX

ECSPI1_SS0

CSI_DATA13

EIM_DATA13

GPIO3_IO26

SRC_BT_CFG29

USDHC2_DATA1

EPDC_SDCE01

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

130 Power GND - - -
131 LCD LCD-DATA22 LCD_DATA22 MQS_RIGHT

ECSPI1_MOSI

CSI_DATA14

EIM_DATA14

GPIO3_IO27

SRC_BT_CFG30

USDHC2_DATA2

USDHC2_DATA2

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

132 Power GND - - -
133 LCD LCD-DATA17 LCD_DATA17 UART7_RX

CSI_DATA00

EIM_DATA09

GPIO3_IO22

SRC_BT_CFG25

USDHC2_DATA7

EPDC_GDSP

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

134 LCD LCD-DATA23 LCD_DATA23 MQS_LEFT

ECSPI1_MISO

CSI_DATA15

EIM_DATA15

GPIO3_IO28

SRC_BT_CFG31

USDHC2_DATA3

EPDC_SDCE03

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

135 Power GND - - -
136 Power GND - - -
137 LCD LCD-DATA18 LCD_DATA18 PWM5_OUT

CA7_MX6ULL_EVENTO

CSI_DATA10

EIM_DATA10

GPIO3_IO23

SRC_BT_CFG26

USDHC2_CMD

EPDC_BDR01

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

138 LCD LCD-DATA19 LCD_DATA19 PWM6_OUT

WDOG1_WDOG_ANY

CSI_DATA11

EIM_DATA11

GPIO3_IO24

SRC_BT_CFG27

USDHC2_CLK

EPDC_VCOM00

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

139 LCD LCD-DATA13 LCD_DATA13 SAI3_TX_BCLK

CSI_DATA21

EIM_DATA05

GPIO3_IO18

SRC_BT_CFG13

USDHC2_RESET_B

EPDC_BDR00

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

140 LCD LCD-DATA20 LCD_DATA20 UART8_TX

ECSPI1_SCLK

CSI_DATA12

EIM_DATA12

GPIO3_IO25

SRC_BT_CFG28

USDHC2_DATA0

EPDC_VCOM01

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

141 LCD LCD-DATA14 LCD_DATA14 SAI3_RX_DATA

CSI_DATA22

EIM_DATA06

GPIO3_IO19

SRC_BT_CFG14

USDHC2_DATA4

EPDC_SDSHR

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

142 LCD LCD-DATA15 LCD_DATA15 SAI3_TX_DATA

CSI_DATA23

EIM_DATA07

GPIO3_IO20

SRC_BT_CFG15

USDHC2_DATA5

EPDC_GDRL

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

143 LCD LCD-DATA8 LCD_DATA08 SPDIF_IN

CSI_DATA16

EIM_DATA00

GPIO3_IO13

SRC_BT_CFG08

FLEXCAN1_TX

EPDC_PWRIRQ

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

144 LCD LCD-DATA16 LCD_DATA16 UART7_TX

CSI_DATA01

EIM_DATA08

GPIO3_IO21

SRC_BT_CFG24

USDHC2_DATA6

EPDC_GDCLK

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

145 LCD LCD-DATA9 LCD_DATA09 SAI3_MCLK

CSI_DATA17

EIM_DATA01

GPIO3_IO14

SRC_BT_CFG09

FLEXCAN1_RX

EPDC_PWRWAKE

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

146 Power GND - - -
147 Power GND - - -
148 LCD LCD-DATA11 LCD_DATA11 SAI3_RX_BCLK

CSI_DATA19

EIM_DATA03

GPIO3_IO16

SRC_BT_CFG11

FLEXCAN2_RX

EPDC_PWRSTAT

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

149 LCD LCD-DATA5 LCD_DATA05 UART8_RTS_B

ENET2_1588_EVENT2_OUT

SPDIF_OUT

GPIO3_IO10

SRC_BT_CFG05

ECSPI1_SS1

EPDC_SDDO05

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

150 LCD LCD-DATA12 LCD_DATA12 SAI3_TX_SYNC

CSI_DATA20

EIM_DATA04

GPIO3_IO17

SRC_BT_CFG12

ECSPI1_RDY

EPDC_PWRCTRL00

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

151 LCD LCD-DATA6 LCD_DATA06 UART7_CTS_B

ENET2_1588_EVENT3_IN

SPDIF_LOCK

GPIO3_IO11

SRC_BT_CFG06

ECSPI1_SS2

EPDC_SDDO06

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

152 LCD LCD-DATA10 LCD_DATA10 SAI3_RX_SYNC

CSI_DATA18

EIM_DATA02

GPIO3_IO15

SRC_BT_CFG10

FLEXCAN2_TX

EPDC_PWRCOM

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

153 LCD LCD-DATA0 LCD_DATA00 PWM1_OUT

ENET1_1588_EVENT2_IN

I2C3_SDA

GPIO3_IO05

SRC_BT_CFG00

SAI1_MCLK

EPDC_SDDO00

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

154 LCD LCD-DATA3 LCD_DATA03 PWM4_OUT

ENET1_1588_EVENT3_OUT

I2C4_SCL

GPIO3_IO08

SRC_BT_CFG03

SAI1_RX_DATA

EPDC_SDDO03

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

155 LCD LCD-DATA1 LCD_DATA01 PWM2_OUT

ENET1_1588_EVENT2_OUT

I2C3_SCL

GPIO3_IO06

SRC_BT_CFG01

SAI1_TX_SYNC

EPDC_SDDO01

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

156 Power GND - - -
157 LCD LCD-RESET LCD_RESET LCDIF_CS

CA7_MX6ULL_EVENT

ISAI3_TX_DATA

WDOG1_WDOG_ANY

GPIO3_IO04

ECSPI2_SS3

EPDC_GDOE

LCD interface signal or universal GPIO with 3.3V logic levels.
158 LCD LCD-DATA4 LCD_DATA04 UART8_CTS_B

ENET2_1588_EVENT2_IN

SPDIF_SR_CLK

GPIO3_IO09

SRC_BT_CFG04

SAI1_TX_DATA

EPDC_SDDO04

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

159 Power GND - - -
160 LCD LCD-HSYNC LCD_HSYNC LCDIF_RS

UART4_CTS_B

SAI3_TX_BCLK

WDOG3_WDOG_RST_B_DEB

GPIO3_IO02

ECSPI2_SS1

EPDC_SDOE

LCD interface signal or universal GPIO with 3.3V logic levels.
161 LCD LCD-CLK LCD_CLK LCDIF_WR_RWN

UART4_TX

SAI3_MCLK

EIM_CS2_B

GPIO3_IO00

WDOG1_WDOG_RST_B_DEB

EPDC_SDCLK

LCD interface signal or universal GPIO with 3.3V logic levels.

10R resistor connected in series.

162 LCD LCD-VSYNC LCD_VSYNC LCDIF_BUSY

UART4_RTS_B

SAI3_RX_DATA

WDOG2_WDOG_B

GPIO3_IO03

ECSPI2_SS2

EPDC_SDCE00

LCD interface signal or universal GPIO with 3.3V logic levels.
163 LCD LCD-ENABLE LCD_ENABLE LCDIF_RD_E

UART4_RX

SAI3_TX_SYNC

EIM_CS3_B

GPIO3_IO01

ECSPI2_RDY

EPDC_SDLE

LCD interface signal or universal GPIO with 3.3V logic levels.
164 LCD LCD-DATA2 LCD_DATA02 PWM3_OUT

ENET1_1588_EVENT3_IN

I2C4_SDA

GPIO3_IO07

SRC_BT_CFG02

SAI1_TX_BCLK

EPDC_SDDO02

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

165 Power GND - - -
166 LCD LCD-DATA7 LCD_DATA07 UART7_RTS_B

ENET2_1588_EVENT3_OUT

SPDIF_EXT_CLK

GPIO3_IO12

SRC_BT_CFG07

ECSPI1_SS3

EPDC_SDDO07

LCD interface signal or universal GPIO with 3.3V logic levels.

Internally used as boot configuration input (Notes 2, 3 & 4).

167 SDIO SDIO1-D0 SD1_DATA0 GPT2_COMPARE3

SAI2_TX_SYNC

FLEXCAN1_TX

EIM_ADDR21

GPIO2_IO18

ANATOP_OTG1_ID

SDIO interface signal or universal GPIO with 3.3V logic levels.

Used by WiFi/BT module if built-in SOM.

Built-in internal pull-up 10k.

168 Power GND - - -
169 SDIO SDIO1-D3 SD1_DATA3 GPT2_CAPTURE2

SAI2_TX_DATA

FLEXCAN2_RX

EIM_ADDR24

GPIO2_IO21

CCM_CLKO2

ANATOP_OTG2_ID

SDIO interface signal or universal GPIO with 3.3V logic levels.

Used by WiFi/BT module if built-in SOM.

Built-in internal pull-up 10k.


170 Power GND - - -
171 SDIO SDIO1-D1 SD1_DATA1 GPT2_CLK

SAI2_TX_BCLK

FLEXCAN1_RX

EIM_ADDR22

GPIO2_IO19

USB_OTG2_PWR

SDIO interface signal or universal GPIO with 3.3V logic levels.

Used by WiFi/BT module if built-in SOM.

Built-in internal pull-up 10k.


172 Power GND - - -
173 SDIO SDIO1-CMD SD1_CMD GPT2_COMPARE1

SAI2_RX_SYNC

SPDIF_OUT

EIM_ADDR19

GPIO2_IO16

SDMA_EXT_EVENT00

USB_OTG1_PWR

SDIO interface signal or universal GPIO with 3.3V logic levels.

Used by WiFi/BT module if built-in SOM.

Built-in internal pull-up 10k.


174 Power GND - - -
175 SDIO SDIO1-D2 SD1_DATA2 GPT2_CAPTURE1

SAI2_RX_DATA

FLEXCAN2_TX

EIM_ADDR23

GPIO2_IO20

CCM_CLKO1

USB_OTG2_OC

SDIO interface signal or universal GPIO with 3.3V logic levels.

Used by WiFi/BT module if built-in SOM.

Built-in internal pull-up 10k.


176 Power GND - - -
177 Power GND - - -
178 Power GND - - -
179 SDIO SDIO1-CLK SD1_CLK GPT2_COMPARE2

SAI2_MCLK

SPDIF_IN

EIM_ADDR20

GPIO2_IO17

USB_OTG1_OC

SDIO interface signal or universal GPIO with 3.3V logic levels.

Used by WiFi/BT module if built-in SOM.

180 Power GND - - -
181 Power GND - - -
182 Power GND - - -
183 CSI CSI-PIXCLK CSI_PIXCLK USDHC2_WP

RAWNAND_CE3_B

I2C1_SCL

EIM_OE

GPIO4_IO18

SNVS_HP_VIO_5

UART6_RX

ESAI_TX2_RX3

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-WAKE in SOM with WiFi/BT module

184 Power GND - - -
185 Power GND - - -
186 CSI CSI-DATA6 CSI_DATA06 USDHC2_DATA6

ECSPI1_MOSI

EIM_AD06

GPIO4_IO27

SAI1_RX_DATA

USDHC1_RESET_BE

SAI_TX5_RX0

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-PCM-OUT in SOM with WiFi/BT module

187 CSI CSI-MCLK CSI_MCLK USDHC2_CD_B

RAWNAND_CE2_B

I2C1_SDA

EIM_CS0_B

GPIO4_IO17

SNVS_HP_VIO_5_CTL

UART6_TX

ESAI_TX3_RX2

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-ENABLE in SOM with WiFi/BT module

188 CSI CSI-DATA7 CSI_DATA07 USDHC2_DATA7

ECSPI1_MISO

EIM_AD07

GPIO4_IO28

SAI1_TX_DATA

USDHC1_VSELECT

ESAI_TX0

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-PCM-IN in SOM with WiFi/BT module

189 Power GND - - -
190 CSI CSI-DATA5 CSI_DATA05 USDHC2_DATA5

USDHC2_DATA5

EIM_AD05

GPIO4_IO26

SAI1_TX_BCLK

USDHC1_CD_BE

SAI_TX_CLK

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-PCM-CLK in SOM with WiFi/BT module

191 CSI CSI-DATA4 CSI_DATA04 USDHC2_DATA4

ECSPI1_SCLK

EIM_AD04

GPIO4_IO25

SAI1_TX_SYNC

USDHC1_WP

ESAI_TX_FS

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-PCM-SYNC in SOM with WiFi/BT module

192 CSI CSI-DATA3 CSI_DATA03 USDHC2_DATA3

ECSPI2_MISO

EIM_AD03

GPIO4_IO24

SAI1_RX_BCLK

UART5_CTS_B

ESAI_RX_CLK

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-CTS in SOM with WiFi/BT module

193 CSI CSI-DATA1 CSI_DATA01 USDHC2_DATA1

ECSPI2_SS0

EIM_AD01

GPIO4_IO22

SAI1_MCLK

UART5_RX

ESAI_RX_HF_CLK

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-TXD in SOM with WiFi/BT module

194 CSI CSI-DATA2 CSI_DATA02 USDHC2_DATA2

ECSPI2_MOSI

EIM_AD02

GPIO4_IO23

SAI1_RX_SYNC

UART5_RTS_B

ESAI_RX_FS

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-RTS in SOM with WiFi/BT module

195 CSI CSI-DATA0 CSI_DATA00 USDHC2_DATA0

ECSPI2_SCLK

EIM_AD00

GPIO4_IO21

SRC_INT_BOOT

UART5_TX

ESAI_TX_HF_CLK

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-RXD in SOM with WiFi/BT module

196 Power CSI-VREF - - Leave open if not used.
197 CSI CSI-HSYNC CSI_HSYNC USDHC2_CMD

I2C2_SCL

EIM_LBA_B

GPIO4_IO20

PWM8_OUT

UART6_CTS_B

ESAI_TX1

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

WLAN-HWAKE in SOM with WiFi/BT module

198 CSI CSI-VSYNC CSI_VSYNC SDHC2_CLK

I2C2_SDA

EIM_RW

GPIO4_IO19

PWM7_OUT

UART6_RTS_B

ESAI_TX4_RX1

Video CMOS sensor signal or universal GPIO with 3.3V logic levels.

BT-HWAKE in SOM with WiFi/BT module

199 Power GND - - -
200 Power GND - - -

Dimensions

Retrieved from "https://wiki.somlabs.com/index.php?title=VisionSOM-6ULL_Datasheet_and_Pinout&oldid=3500"