VisionCB-8M-STD

VisionCB-8M-STD

VisionCB-8M-STD is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. The carrier board connects with the SoM via a standard SODIMM connector. VisionCB-8M-STD carrier board is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM.

Documentation

• VisionCB-8M-STD Datasheet and Pinout
• VisionCB-8Mmini-STD - Datasheet
• VisionCB-8Mmini-STD - Wiki Page for CB (Additional Resources)
• VisionCB-8Mmini-STD - STEP
• VisionCB-8Mmini-STD - Schematic

How to

• VisionCB-8M-STD Power Supply

Specifications

SOM compatibility	VisionSOM-8Mmini module with quad core NXP iMX8Mmini processor (4 x Cortex-A53 + Cortex-M4)
SOM socket	SODIMM200
Display connector	up to 4 lanes MIPI-DSI interface (FPC30)
Network	1x Ethernet 10/100/1000Mbit/s, RJ45
USB	USB 2.0 host x1 USB-OTG 2.0 x1
Debugger	Built-in Segger J-Link (JTAG)
Console interface	USB/UART
Switches	4/2 (user/system)
LEDs	4/2 (user/system)
Connectors	MIPI-CSI2 camera connector (FPC30) PCIe (1 lane, FPC16) Raspberry Pi compatible (40 pins, 2.54mm) MicroSD socket Serial comm (20 pins, 2.54mm)
Power supply	External 9-12V DC
Temperature Range	0 to +70°C
Dimensions	160mm x 100mm x 18mm