Personal tools

SL-ADP-PCIe-M2 Datasheet and Pinout: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
← Older edit
 
(12 intermediate revisions by the same user not shown)
Line 4: Line 4:
[[File:SL-ADP-PCIe-M2-ssd.png|800px|center]]
[[File:SL-ADP-PCIe-M2-ssd.png|800px|center]]
<br>  
<br>  
SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD) in embedded systems based on i.MX8Mmini.
SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD, single lane) in embedded systems based on i.MX8Mmini MPU. The SL-ADP-PCIe-M2 module is equipped with M.2 key M connector and is compatible with 2242, 2260 or 2280 modules.<br>The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD.
The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD.


== Features ==
== Features ==
* Equipped with M.2 key M SSD socket
* Equipped with M.2 key M SSD socket
* Single rail +3.3V power supply
* Single rail +3.3V power supply
* Dual lane PCIe communication interface
* Single lane PCIe communication interface
* Operating temperature -30÷+85°C
* Operating temperature -30÷+85°C
* Fully compatible with SoMLabs carrier boards equippped with PCIe interface on FPC16 connector
* Fully compatible with SoMLabs carrier boards equippped with PCIe interface on FPC16 connector
Line 83: Line 82:
| -
| -
| kHz
| kHz
|-
|}
|}
<br>
<br>Note:
<br>Note:
<br>1. Current value without SSD module consumption.
<br>1. Current consumption value without SSD module.
<br>2. nPERST, nCLKREQ and nPEWAKE pins are connected to +3.3V with 10k pull-up resistors.
<br>3. 32kHz generator connected to SUSCLK.


== PCIe Pinout ==
== PCIe Pinout ==
Line 101: Line 98:
|-
|-
| 1
| 1
| GND
| -
| -
| -
|-
|-
Line 109: Line 106:
|-
|-
| 3
| 3
| -
| +3.3V
| -
| Power supply
|-
|-
| 4
| 4
| -
| +3.3V
| -
| Power supply
|-
|-
| 5
| 5
Line 121: Line 118:
|-
|-
| 6
| 6
| +3.3V
| -
| Power supply
| -
|-
|-
| 7
| 7
| +3.3V
| GND
| Power supply
| -
|-
|-
| 8
| 8
| GND
| PCIe_CLK_n
| -
| Negative CLK data lane
|-
|-
| 9
| 9
| -
| PCIe_CLK_p
| -
| Positive CLK data lane
|-
|-
| 10
| 10
| PWDN
| GND
| OV5640 - Power Down input (active high, internal pull-down)
| -
|-
|-
| 11
| 11
| RESET
| PCIe_TXN_p
| OV5640 - Reset input (active low, internal pull-up)
| Positive TX data lane
|-
|-
| 12
| 12
| PCIe_TXN_n
| Negative TX data lane
|-
| 13
| GND
| GND
| -
| -
|-
| 13
| SIOD_C
| SDA line of configuration I2C interface (internal pull-up)
|-
|-
| 14
| 14
| SIO_D
| PCIe_RXN_p
| SCL line of configuration I2C interface (internal pull-up)
| Positive RX data lane
|-
|-
| 15
| 15
| GND
| PCIe_RXN_n
| -
| Negative RX data lane
|-
|-
| 16
| 16
| -
| -
|-
| 17
| -
| -
|-
| 18
| GND
| -
|-
| 19
| -
| -
|-
| 20
| -
| -
|-
| 21
| GND
| -
|-
| 22
| MDN1
| CSI_DATA1_n
|-
| 23
| MDP1
| CSI_DATA1_p
|-
| 24
| GND
| -
|-
| 25
| MDN0
| CSI_DATA0_n
|-
| 26
| MDP0
| CSI_DATA0_p
|-
| 27
| GND
| -
|-
| 28
| MCN
| CSI_CLK_n
|-
| 29
| MCP
| CSI_CLK_p
|-
| 30
| GND
| GND
| -
| -
|-
|-
|}
|}
<br>Note:
<br>1. nPERST, nCLKREQ and nPEWAKE pins are connected to +3.3V with 10k pull-up resistors.
<br>2. 32kHz generator connected to SUSCLK input.
<br>3. ACT LED is controlled by DAS/DSS/nLED1 pin.


== Dimensions ==
== Dimensions ==
<br>
<br>
[[File:SL-ADP-PCIe-M2-dimension.jpg|center]]
[[File:SL-ADP-PCIe-M2-dimension.jpg|center]]

Latest revision as of 11:28, 4 May 2021

SL-ADP-PCIe-M2 M.2 PCIe mass storage adapter Datasheet and Pinout

General description


SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD, single lane) in embedded systems based on i.MX8Mmini MPU. The SL-ADP-PCIe-M2 module is equipped with M.2 key M connector and is compatible with 2242, 2260 or 2280 modules.
The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD.

Features

  • Equipped with M.2 key M SSD socket
  • Single rail +3.3V power supply
  • Single lane PCIe communication interface
  • Operating temperature -30÷+85°C
  • Fully compatible with SoMLabs carrier boards equippped with PCIe interface on FPC16 connector
  • Built-in 32kHz clock source
  • Built-in two LEDs
  • Compatible with 2242, 2260 and 2280 modules
  • Connection with carrier board using FPC16 cable

Pictures

Note: the SSD module shown in the picture is not included in the SL-ADP-PCIe-M2 kit!





Ordering info

SL-ADP-PCIe-M2 - FPC 16-pin flat cable (A-A) is included. The SSD module is not included in the SL-ADP-PCIe-M2 kit.

Operating ranges

Parameter Value Unit Comment
Power Supply
3.3
V
 Powered from carrier board
Current
15
mA
 Maximum peak value (excluding SSD module)
Working temperature
-30…+85
 oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+3.3V Supply Voltage 3.2 3.3 3.35 V
I3.3V Supply Current (3.3V) 1 - 15 mA
fSUSCLK Suspend mode CLK frequency - 32 - kHz


Note:
1. Current consumption value without SSD module.

PCIe Pinout




FPC16 connector pin Function name Description
1 - -
2 - -
3 +3.3V Power supply
4 +3.3V Power supply
5 - -
6 - -
7 GND -
8 PCIe_CLK_n Negative CLK data lane
9 PCIe_CLK_p Positive CLK data lane
10 GND -
11 PCIe_TXN_p Positive TX data lane
12 PCIe_TXN_n Negative TX data lane
13 GND -
14 PCIe_RXN_p Positive RX data lane
15 PCIe_RXN_n Negative RX data lane
16 GND -


Note:
1. nPERST, nCLKREQ and nPEWAKE pins are connected to +3.3V with 10k pull-up resistors.
2. 32kHz generator connected to SUSCLK input.
3. ACT LED is controlled by DAS/DSS/nLED1 pin.

Dimensions


Retrieved from "https://wiki.somlabs.com/index.php?title=SL-ADP-PCIe-M2_Datasheet_and_Pinout&oldid=2697"