Personal tools

VisionSOM-V2L Datasheet and Pinout: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
Created page with "{{PageHeader|VisionSOM-V2L Datasheet and Pinout}} __toc__ __jzpdf__ == General description == 700px|center The SpaceSOM-8Mplus family is a SO..."
 
 
(36 intermediate revisions by the same user not shown)
Line 4: Line 4:
[[File:VisionSOM-V2L_intro.jpg|700px|center]]
[[File:VisionSOM-V2L_intro.jpg|700px|center]]


The SpaceSOM-8Mplus family is a SODIMM-sized SoM based on the NXP quad core i.MX8M plus application processor which features an advanced implementation of NPU (ML+AI) coprocessor, a dual or four ARM Cortex-A53 cores (at speed up to 1.8GHz) and ARM Cortex-M7 core (at speed up to 800MHz) as well as a 2D (HD1080p60) and 3D Graphics Processing Unit (GPU) Open GL 3.01ES compatible and Video Processing Unit (VPU) with D1080p60 H.264 and HD1080p60 H.265 capabilities.  
The VisionSOM-V2L family is a SODIMM-sized SoM based on the Renesas dual core RZ/V2L application processor which features an advanced implementation of DRP-AI (ML+AI) coprocessor. The VisionSOM-V2L family offers energy efficient dual ARM Cortex-A55 cores (at speed up to 1.2GHz) and ARM Cortex-M33 core (at speed up to 200MHz) as well as a 3D Graphics Processing Unit (ARM Mali-G31 GPU @500MHz, 1920x1080 @60fps) with Open GL 3.2ES/OpenCL 2.0 (Full Profile) capabilities and Video Codec Processor (VCP) with 1920x1080 @30fps.  


The SpaceSOM-8Mplus is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power and dual-band 2.4/5GHz, 802.11a/b/g/n/ac Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The SpaceSOM-8Mplus provides a variety memory configuration including flexible range of LPDDR4, eMMC or SD memory card that meets our customers requirements.
The VisionSOM-V2L is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power, optinally integrated 2.4GHz Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-V2L provides a variety memory configuration, including 1GB of fast and efficient DDR4 and eMMC Flash that meets our customers requirements.


The SoM supports connections to a variety of interfaces: two high-speed USB 2.0/3.0 on-the-go with PHY, dual Ethernet 1Gbit, audio, display with touch panel and MIPI-DSI/HDMI/LVDS interface and serial communication interfaces. In addition, the system supports industrial grade embedded applications.
The SoM supports connections to a variety of interfaces: two high-speed USB 2.0 with integrated PHY, dual Ethernet 1Gbit, audio, MIPI-DSI display output with optional touch panel, MIPI-CSI camera input with scaling processor, serial communication interfaces including 2xCAN. In addition, the system supports industrial grade embedded applications.


SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
Line 14: Line 14:


=== Applications ===
=== Applications ===
*IoT Edge Devices
*IoT gateways
*Machine vision equipment
*Machine vision equipment
*AI+ML Decision/Recognition Systems
*Robotics
*Robotics
*Human-machine Interfaces (HMI)
*Human-machine Interfaces (HMI)
*IP Cameras
*IP Cameras
*Video Stream Servers
*Home Appliances
*Home Appliances
*Home Automation – Smart Home
*Home Automation – Smart Home
*IoT gateways
*Residential gateways
*Residential gateways
*Industrial embedded Linux computer
*Industrial embedded Linux computer
Line 27: Line 28:


== Features ==
== Features ==
*Powered by quad core NXP i.MX8M plus application processor
*Powered by dual core Renesas RZ/V2L application processor (R9A07G054L27GBG)
*Quad ARM Cortex-A53 core at speed up to 1.8GHz
*Dual ARM Cortex-A55 core at speed up to 1.2GHz
*ARM Cortex-M7 core at speed up to 800MHz
*ARM Cortex-M33 core at speed up to 200MHz
*Integrated Machine-Learning (ML) and Artificial Intelligence (AI) Neural Processing Unit (NPU)
*Integrated Machine-Learning (ML) and Artificial Intelligence (AI) AI Accelerator (DRP-AI)
*Up to 4GB DRAM LPDDR4
*Integrated 3D GPU (ARM Mali-G31 @500MHz)
*Up to 32GB eMMC memory or uSD memory card
*1GB RAM (DDR4)
*Optional Murata dual-band 2.4/5GHz, 802.11a/b/g/n/ac Wi-Fi and Bluetooth v5.1
*Up to 32GB eMMC memory
*Built-in PCIe 3.0 communication interface
*Optional Murata radio module 2.4GHz Wi-Fi and Bluetooth v5.1
*Built-in dual USB 2.0/3.0 interface
*Built-in dual USB 2.0 interface
*Built-in HDMI/LVDS and MIPI-DSI display interface
*Built-in 2xCAN-FD interfaces
*Built-in MIPI-DSI display interface
*Built-in MIPI-CSI camera interface
*Power-efficient and cost-optimized solution
*Power-efficient and cost-optimized solution
*Ideal for industrial IoT and embedded applications
*Ideal for industrial IoT and embedded applications
Line 47: Line 50:
|-
|-
| eMMC ||  
| eMMC ||  
[[File:SpaceSOM-8Mplus-eMMC-top.jpg|center|thumb]]
[[File:VisionSOM-x2L-eMMC-top.png|center|thumb]]
[[File:SpaceSOM-8Mplus-eMMC-bottom.jpg|center|thumb]]
[[File:VisionSOM-x2L-eMMC-bottom.png|center|thumb]]
|-
|-
|}
|}
Line 54: Line 57:
{| class="frame-green"
{| class="frame-green"
|-
|-
| WiFi/BT module is available for all memory variants configurations.
| WiFi/BT module is available for all memory configurations.
|}
|}


Line 74: Line 77:
       "name" : "SOM Name",
       "name" : "SOM Name",
       "type" : "selector",
       "type" : "selector",
       "symbol" : "3",
       "symbol" : "2",
       "values" : [
       "values" : [
                     {"value" : "3",
                     {"value" : "2",
                     "description" : "High Performance SpaceSOM SODIM260 module"}
                     "description" : "High Performance VisionSOM SODIM200 module"}
                 ]
                 ]
     },
     },
Line 83: Line 86:
       "name" : "CPU Family",
       "name" : "CPU Family",
       "type" : "selector",
       "type" : "selector",
       "symbol" : "5",
       "symbol" : "2",
       "values" : [
       "values" : [
                     {"value" : "5",
                     {"value" : "2",
                     "description" : "i.MX 8M plus"}
                     "description" : "Renesas RZ/V2L family"}
                 ]
                 ]
     },
     },
Line 94: Line 97:
       "symbol" : "CpuType",
       "symbol" : "CpuType",
       "values" : [
       "values" : [
                     {"value" : "X8MPQC", "description" : "i.MX 8M plus Quad Core"}
                     {"value" : "RV2LDC", "description" : "RZ/V2L dual Cortex-A55 + Cortex-M33 + DRP-AI"}
                 ]
                 ]
     },
     },
Line 106: Line 109:
       "symbol" : "Clock",
       "symbol" : "Clock",
       "values" : [
       "values" : [
                     {"value" : "1600C", "description" : "1.6GHz (Industrial temperature range)"},
                     {"value" : "1200C", "description" : "1.2GHz"}
                    {"value" : "1800C", "description" : "1.8GHz (Commercial temperature range)"}
                 ]
                 ]
     },
     },
Line 115: Line 117:
     },
     },
     {
     {
       "name" : "LPDDR4 RAM Size",
       "name" : "DDR4 RAM Size",
       "type" : "selector",
       "type" : "selector",
       "symbol" : "RamSize",
       "symbol" : "RamSize",
       "values" : [
       "values" : [
                     {"value" : "01GR", "description" : "1GB (1024MB)"},
                     {"value" : "01GR", "description" : "1GB (1024MB)"}
                    {"value" : "02GR", "description" : "2GB (2048MB)"},
                    {"value" : "04GR", "description" : "4GB (4096MB)"}
                 ]
                 ]
     },
     },
Line 149: Line 149:
       "values" : [
       "values" : [
                     {"value" : "0SF", "description" : "No Special Features"},
                     {"value" : "0SF", "description" : "No Special Features"},
                     {"value" : "1WB", "description" : "Built-in dual-band Wi-Fi and Bluetooth v5.1"}
                     {"value" : "1WB", "description" : "Built-in 2.4GHz Wi-Fi and Bluetooth v5.1"}
                 ]
                 ]
     },
     },
Line 161: Line 161:
       "symbol" : "TEMP",
       "symbol" : "TEMP",
       "values" : [
       "values" : [
                    {"value" : "C", "description" : "Consumer: 0 to +70 C "},
                     {"value" : "E", "description" : "Extended: -25 to +70 C"},
                     {"value" : "E", "description" : "Extended: -25 to +70 C"},
                     {"value" : "I", "description" : "Industrial: -40 to +85 C"}
                     {"value" : "I", "description" : "Industrial: -40 to +85 C"}
Line 171: Line 170:


== Block Diagram ==
== Block Diagram ==
[[File:SpaceSOM-8Mplus-blokowy.png|250px|center]]
[[File:VisionSOM-V2L-blokowy.png|250px|center]]


== Operating ranges ==
== Operating ranges ==
Line 183: Line 182:
| <center>5.0</center>
| <center>5.0</center>
| <center>V</center>
| <center>V</center>
| Connected to VDD 5V SODIM260 pins
| Connected to VDD-5V0 SODIM200 pins
|-
|-
| Max. input GPIO voltage
| Max. input GPIO voltage
| <center>1.8/3.3</center>
| <center>3.3</center>
| <center>V</center>
| <center>V</center>
| -
| In 3.3V power domain
|-
| Max. input GPIO voltage
| <center>1.8</center>
| <center>V</center>
| In 1.8V power domain
|-
|-
| rowspan="3" | Environment temperature<sup>1</sup>
| rowspan="3" | Environment temperature
| <center>-40…+85</center>
| <center>-40…+85</center>
| rowspan="3" | <sup>o</sup>C
| rowspan="3" | <sup>o</sup>C
| Industrial range w/o WiFi module
| Industrial range w/o WiFi module
|-
|-
| <center>-30…+85</center>
| <center>-25…+70</center>
| Industrial range with WiFi module
| Industrial range with WiFi module
|-
|-
Line 201: Line 205:
| Consumer range
| Consumer range
|}
|}
Note: <br />
1. Maximum MPU junction temperature is +105<sup>o</sup>C.<br />
2. Junction temperature determines MPU lifetime. Details: NXP AN13214 Application Note.


== Electrical parameters ==
== Electrical parameters ==
Line 216: Line 217:
| Max.
| Max.
|-
|-
| VDD-5V || Supply Voltage (Input) || 4.0 || 5.0 || 5.25 || V
| VDD-5V || Supply Voltage (Input) || 4.0 || 5.0 || 5.5 || V
|-
| SD1-NVCC || Output power supply for external 1.8/3.3V accesories || - || - || 0.08 || A
|-
|-
| VDD-1V8 || Output power supply for external 1.8V accesories || - || - || 0.4 || A
| VDD-1V8 || Output power supply for external 1.8V accesories || - || - || 0.3<sup>1</sup> || A
|-
|-
| VDD-3V3 || Output power supply for external 3.3V accesories || - || - || 0.3<sup>1</sup> || A
| VDD-3V3 || Output power supply for external 3.3V accesories || - || - || 0.3<sup>2</sup> || A
|-
|-
| VGPIO @1V8 || GPIO Input Voltage || 0 || - || 2.05 || V
| VGPIO @1V8 || GPIO Input Voltage || 0 || - || 2.05 || V
Line 228: Line 227:
| VGPIO @3V3 || GPIO Input Voltage || 0 || - || 3.6<sup>2</sup> || V
| VGPIO @3V3 || GPIO Input Voltage || 0 || - || 3.6<sup>2</sup> || V
|-
|-
| V<sub>USB_VBUS</sub> || USB VBUS Input Voltage || 0 || - || 3.95<sup>3</sup> || V
| V<sub>USB0-VBUS</sub> || USB VBUS Input Voltage || 0 || - || 5.25<sup>3</sup> || V
|-
| V<sub>ETH0</sub> || I/O voltage for Ethernet 0 || 0 || - || 1.8 || V
|-
| V<sub>ETH1</sub> || I/O voltage for Ethernet 1 || 0 || - || 1.8 or 3.3<sup>4</sup> || V
|-
| V<sub>JTAG</sub> || I/O voltage for Ethernet 1 || 0 || - || 1.8<sup>5</sup> || V
|-
| V<sub>ADC-IN</sub> || Input voltage for ADC-CHx<sup>6</sup> || 0 || - || 1.8 || V
|}
|}
Notes:<br />
Notes:<br />
1. Total current on both VDD-1V8 outputs.<br />
1. Total current on both VDD-3V3 outputs.<br />
1. Total current on both VDD-3V3 outputs.<br />
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.45V.<br />
3. Input current is limited by 1+1,8kOhm resistors (voltage divider) connected in series.<br />
3. Input current is limited by 30k resistor connected in series.<br />
4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-up'ed.).<br />
5. JTAG/SWD interface lines are 1.8V compatible.<br />
6. "x" means 0...7.<br />


== SoM pinout ==
== SoM pinout ==
Important notes:
Important notes:
<br />1. Detail pin configurations description you can find, edit and arrange in dedicated MEX file (with free "iMX PinTool" configurational tool).
<br />1. Detail pin configurations description you can find, edit and arrange in dedicated SCFG file (with free "Smart Configurator" tool).
<br />2. JTAG-MOD (ball G2) is permanently connected to GND
<br />2. On-board eMMC memory is connected to SDIO0 interface.
<br />3. BOOT-MODE0 – RECOVERY line 0 -> BOOT-MODE0=1
<br />3. Optional on-board QSPI Flash memory is connected to QSPI0 interface.
<br />4. BOOT-MODE1...MODE3 are premanently connected to GND
<br />4. SDIO1 interface is used to communication with Murata 1DX radio module.
<br />5. SDIO2 interface is used to communication with Murata 1ZM radio module
<br />5. UART2 is used to communication with BT-BLE interatted with Murata 1DX radio module.
<br />6. eMMC memory is connected to SDIO3 interface
<br />6. I2C3 is used to communication with on-board PMIC.




{| class="wikitable"  
{| class="wikitable"  
|-
|-
! <br />SOM pin number
! SOM pin number
! <br />Default function
! Default function
! <br />GPIO
! GPIO
! <br />FCBGA548 ball
! BGA456 ball
! <br />Notes
! Notes
|-
|-
| <br />1
| 1
| <br />GND
| GND
| <br />-
| Power
| <br />-
| -
| <br />
|  
|-
|-
| <br />2
| 2
| <br />GND
| GND
| <br />-
| Power
| <br />-
| -
| <br />
|  
|-
|-
| <br />3
| 3
| <br />JTAG-TMS
| ET0-PHY-RST
| <br />-
| P47-1
| <br />G14
| A20
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />4
| 4
| <br />UART4-TXD
| PWR-GOOD
| <br />GPIO5.29
| Output
| <br />AH5
|  
| <br />3.3V  power domain
| PMIC power-good signalling for external devices
|-
|-
| <br />5
| 5
| <br />JTAG-TCK
| ET0-INT
| <br />-
| P47-0
| <br />G18
| B20
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />6
| 6
| <br />UART4-RXD
| PWR-ON
| <br />GPIO5.28
| Input
| <br />AJ5
|
| <br />3.3V   power domain
| PMIC PWRON input (on-off  function)<br />     Internal pull-down<br />     Connect to GND if not used<br />     Connect to VDD-3V3 with external pull-up resistor (4.7kOhm) and pushbutton   to GND if used
|-
|-
| <br />7
| 7
| <br />JTAG-TDO
| ET0-MDIO
| <br />-
| I/O
| <br />F14
| U1
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />8
| 8
| <br />CAN1-TX
| PWR-FAIL
| <br />GPIO5.03
| Input
| <br />AE18
|  
| <br />3.3V  power domain
| PMIC enable-input:<br />     PWR-FAIL='0' -> SOM power supply is off<br />     PWR-FAIL='1' or left open -> SOM power supply is on<br />     Can bue used as cold-reset input (active low)
|-
|-
| <br />9
| 9
| <br />JTAG-TDI
| ET0-MDC
| <br />-
| I/O
| <br />G16
| U2
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />10
| 10
| <br />CAN1-RX
| RESET-OUT
| <br />GPIO5.04
| Output
| <br />AD18
|  
| <br />3.3V  power domain
| RESET output for external peripherals
|-
|-
| <br />11
| 11
| <br />VDD-3V3
| GND
| <br />-
| Power
| <br />-
| -
| <br />3.3V  power supply output for external accesories, load max. 300mA
|  
|-
|-
| <br />12
| 12
| <br />CAN2-TX
| RESET-IN
| <br />GPIO4.26
| Input
| <br />AH16
|  
| <br />3.3V  power domain
| MPU reset input, active low
|-
|-
| <br />13
| 13
| <br />I2C2-SDA
| ET0-RXC
| <br />GPIO5.17
| I/O
| <br />AE8
| P2
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />14
| 14
| <br />CAN2-RX
| GND
| <br />GPIO4.27
| Power
| <br />AJ15
| -
| <br />3.3V  power domain
|  
|-
|-
| <br />15
| 15
| <br />I2C2-SCL
| ET0-RX-CTL
| <br />GPIO5.16
| I/O
| <br />AH6
| P1
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />16
| 16
| <br />GPIO5.05
| UART0-RXD
| <br />-
| P38-1
| <br />AC18
| B15
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />17
| 17
| <br />GND
| ET0-RXD0
| <br />-
| I/O
| <br />-
| R2
| <br />
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />18
| 18
| <br />GPIO5.23
| UART0-TXD
| <br />-
| P38-0
| <br />AJ3
| A15
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />19
| 19
| <br />SAI3-MCLK
| ET0-RXD1
| <br />GPIO5.02
| I/O
| <br />AJ20
| R1
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />20
| 20
| <br />GPIO5.22
| UART1-CTS
| <br />-
| P41-0
| <br />AD6
| E17
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />21
| 21
| <br />GND
| ET0-RXD2
| <br />-
| I/O
| <br />-
| T2
| <br />
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />22
| 22
| <br />NC
| UART1-RTS
| <br />-
| P41-1
| <br />-
| A18
| <br />
| 3.3V Power Domain
|-
|-
| <br />23
| 23
| <br />SAI3-TXD
| ET0-RXD3
| <br />GPIO5.01
| I/O
| <br />AH18
| T1
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />24
| 24
| <br />NC
| UART1-RXD
| <br />-
| P40-0
| <br />-
| C17
| <br />
| 3.3V Power Domain
|-
|-
| <br />25
| 25
| <br />SAI3-TXC
| GND
| <br />GPIO5.00
| Power
| <br />AH19
| -
| <br />3.3V  power domain
|  
|-
|-
| <br />26
| 26
| <br />UART3-RXD
| UART1-TXD
| <br />GPIO5.26
| P40-1
| <br />AE6
| B17
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />27
| 27
| <br />SAI3-TXFS
| ET0-TX-CTL
| <br />GPIO4.31
| I/O
| <br />AC16
| N2
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />28
| 28
| <br />UART3-TXD
| UART4-RXD
| <br />GPIO5.27
| P2-1
| <br />AJ4
| A13
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />29
| 29
| <br />SAI3-RXD
| ET0-TXC
| <br />GPIO4.30
| I/O
| <br />AF18
| N1
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />30
| 30
| <br />UART2-RXD
| UART4-TXD
| <br />GPIO5.24
| P2-0
| <br />AF6
| B13
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />31
| 31
| <br />SAI3-RXC
| ET0-TXD3
| <br />GPIO4.29
| I/O
| <br />AJ18
| N1
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />32
| 32
| <br />UART2-TXD
| UART3-RXD
| <br />GPIO5.25
| P0-1
| <br />AH4
| B12
| <br />3V3  power domain
| 3.3V Power Domain
|-
|-
| <br />33
| 33
| <br />SAI3-RXFS
| ET0-TXD2
| <br />GPIO4.28
| I/O
| <br />AJ19
| L2
| <br />3.3V  power domain
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />34
| 34
| <br />I2C3-SCL
| UART3-TXD
| <br />GPIO5.18
| P0-0
| <br />AJ7
| A11
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />35
| 35
| <br />GND
| ET0-TXD1
| <br />-
| I/O
| <br />-
| M2
| <br />
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />36
| 36
| <br />I2C3-SDA
| VBAT-RTC
| <br />GPIO5.19
| Power
| <br />AJ6
| -
| <br />3.3V   power domain
| RTC 3V battery
|-
|-
| <br />37
| 37
| <br />DDC-SDA
| ET0-TXD0
| <br />GPIO3.27
| I/O
| <br />AF22
| M1
| <br />
| 1.8V Power Domain<br />     GPIO mode not allowed
|-
|-
| <br />38
| 38
| <br />GND
| GND
| <br />-
| Power
| <br />-
| -
| <br />
|  
|-
|-
| <br />39
| 39
| <br />DDC-SCL
| VDD-1V8
| <br />GPIO3.26
| Power
| <br />AC22
|  
| <br />I2C5-SCL
| 1.8V output for external devices, max. 300 mA
|-
|-
| <br />40
| 40
| <br />SPI2-CS0
| VDD-1V8
| <br />GPIO5.13
| Power
| <br />AJ22
|  
| <br />3.3V  power domain
| 1.8V output for external devices, max. 300 mA
|-
|-
| <br />41
| 41
| <br />HDMI-HPD
| VDD-5V0
| <br />GPIO3.29
| Power
| <br />AE22
|  
| <br />
| External power supply
|-
|-
| <br />42
| 42
| <br />SPI2-SCLK
| VDD-5V0
| <br />GPIO5.10
| Power
| <br />AH21
|  
| <br />3.3V  power domain
| External power supply
|-
|-
| <br />43
| 43
| <br />HDMI-EARC-AUX
| VDD-5V0
| <br />-
| Power
| <br />AH23
|  
| <br />Dedicated  HDMI interface line
| External power supply
|-
|-
| <br />44
| 44
| <br />SPI2-MISO
| VDD-5V0
| <br />GPIO5.12
| Power
| <br />AH20
|  
| <br />3.3V  power domain
| External power supply
|-
|-
| <br />45
| 45
| <br />HDMI-EARC_N
| VDD-5V0
| <br />-
| Power
| <br />AH22
|  
| <br />Dedicated  HDMI interface line
| External power supply
|-
|-
| <br />46
| 46
| <br />SPI2-MOSI
| VDD-5V0
| <br />GPIO5.11
| Power
| <br />AJ21
|  
| <br />3.3V  power domain
| External power supply
|-
|-
| <br />47
| 47
| <br />HDMI-EARC_P
| VDD-5V0
| <br />-
| Power
| <br />AJ23
|  
| <br />Dedicated  HDMI interface line
| External power supply
|-
|-
| <br />48
| 48
| <br />SPI1-CS0
| VDD-5V0
| <br />GPIO5.09
| Power
| <br />AE20
|  
| <br />3.3V  power domain
| External power supply
|-
|-
| <br />49
| 49
| <br />HDMI-CEC
| VDD-5V0
| <br />GPIO3.28
| Power
| <br />AD22
|  
| <br />
| External power supply
|-
|-
| <br />50
| 50
| <br />SPI1-SCLK
| VDD-5V0
| <br />GPIO5.06
| Power
| <br />AF20
|  
| <br />3.3V  power domain
| External power supply
|-
|-
| <br />51
| 51
| <br />GND
| NC
| <br />-
| Not Connected
| <br />-
| -
| <br />
|  
|-
|-
| <br />52
| 52
| <br />SPI1-MISO
| NC
| <br />GPIO5.08
| Not Connected
| <br />AD20
| -
| <br />3.3V  power domain
|  
|-
|-
| <br />53
| 53
| <br />HDMI-CK_N
| VDD-3V3
| <br />-
| Power
| <br />AJ24
|  
| <br />Dedicated  HDMI interface line
| 3.3V output for external devices, max. 300mA
|-
|-
| <br />54
| 54
| <br />SPI1-MOSI
| VDD-3V3
| <br />GPIO5.07
| Power
| <br />AC20
| -
| <br />3.3V   power domain
| 3.3V output for external devices, max. 300mA
|-
|-
| <br />55
| 55
| <br />HDMI-CK_P
| GND
| <br />-
| Power
| <br />AH24
| -
| <br />Dedicated  HDMI interface line
|  
|-
|-
| <br />56
| 56
| <br />GND
| SYSLED
| <br />-
| P42-0
| <br />-
| AG4
| <br />
| 3.3V Power Domain
|-
|-
| <br />57
| 57
| <br />GND
| VPROG
| <br />-
| NC
| <br />-
| -
| <br />
| For SoMLabs purposes only, leave unconnected
|-
|-
| <br />58
| 58
| <br />LVDS0-DATA3_P
| GND
| <br />-
| Power
| <br />C29
| -
| <br />Dedicated  LVDS interface line
|  
|-
|-
| <br />59
| 59
| <br />HDMI-D0_N
| BOOT-RECOVERY
| <br />-
| Input
| <br />AJ25
| colspan="2" | BOOT input, active low   during reset
| <br />Dedicated   HDMI interface line
|-
|-
| <br />60
| 60
| <br />LVDS0-DATA3_N
| SSI-MCLK
| <br />-
| AUDIO_CLK1
| <br />D28
| E12
| <br />Dedicated  LVDS interface line
| -
 
|-
|-
| <br />61
| 61
| <br />HDMI-D0_P
| GND
| <br />-
| Power
| <br />AH25
| -
| <br />Dedicated  HDMI interface line
|  
|-
|-
| <br />62
| 62
| <br />GND
| SSI0-RXD
| <br />-
| P7-1
| <br />-
| AH28
| <br />
| 3.3V Power Domain
|-
|-
| <br />63
| 63
| <br />HDMI-D1_N
| ET1-VDD-SEL
| <br />-
| Input
| <br />AJ26
|  
| <br />Dedicated  HDMI interface line
| Ethernet 1 (ET1) interface  voltage selection:<br />     ET1-VDD-SEL='0' -> V=1.8V<br />     ET1-VDD-SEL='1' or left open -> V=3.3V<br />     The line has internal pull-up.
|-
|-
| <br />64
| 64
| <br />LVDS0-CLK_P
| SSI0-TXD
| <br />-
| P7-0
| <br />A28
| AJ28
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />65
| 65
| <br />HDMI-D1_P
| ET1-PHY-RST
| <br />-
| P47-3
| <br />AH26
| B21
| <br />Dedicated  HDMI interface line
| 3.3V Power Domain
|-
|-
| <br />66
| 66
| <br />LVDS0-CLK_N
| SSI0-RCK
| <br />-
| P6-1
| <br />B28
| AH27
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />67
| 67
| <br />HDMI-D2_N
| ET1-INT
| <br />-
| P47-2
| <br />AJ27
| A21
| <br />Dedicated  HDMI interface line
| 3.3V Power Domain
|-
|-
| <br />68
| 68
| <br />GND
| SSI0-BCK
| <br />-
| P6-0
| <br />-
| AJ27
| <br />
| 3.3V Power Domain
|-
|-
| <br />69
| 69
| <br />HDMI-D2_P
| ET1-MDIO
| <br />-
| P37-1
| <br />AH27
| W1
| <br />Dedicated  HDMI interface line
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />70
| 70
| <br />LVDS0-DATA2_P
| GND
| <br />-
| Power
| <br />B29
| -
| <br />Dedicated  LVDS interface line
|  
|-
|-
| <br />71
| 71
| <br />GND
| ET1-MDC
| <br />-
| P37-0
| <br />-
| W2
| <br />
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />72
| 72
| <br />LVDS0-DATA2_N
| CAN1-RX
| <br />-
| P13-0
| <br />C28
| AF23
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />73
| 73
| <br />SD1-DQS
| GND
| <br />GPIO2.11
| Power
| <br />W26
| -
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
|  
|-
|-
| <br />74
| 74
| <br />LVDS0-DATA1_P
| CAN1-TX
| <br />-
| P12-1
| <br />A27
| AE23
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />75
| 75
| <br />SD1-CD
| ET1-RXC
| <br />GPIO2.10
| P33-1
| <br />W25
| AC1
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />76
| 76
| <br />LVDS0-DATA1_N
| CAN0-RX
| <br />-
| P42-2
| <br />B27
| AJ3
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />77
| 77
| <br />SD1-DATA7
| ET1-RX-CTL
| <br />GPIO2.09
| P34-0
| <br />U25
| AC2
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />78
| 78
| <br />LVDS0-DATA0_P
| CAN0-TX
| <br />-
| P42-1
| <br />A26
| AE7
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />79
| 79
| <br />SD1-DATA6
| ET1-RXD0
| <br />GPIO2.08
| P34-1
| <br />AA28
| AC3
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />80
| 80
| <br />LVDS0-DATA0_N
| GND
| <br />-
| Power
| <br />B26
| -
| <br />Dedicated  LVDS interface line
|  
|-
|-
| <br />81
| 81
| <br />SD1-DATA5
| ET1-RXD1
| <br />GPIO2.07
| P35-0
| <br />AA29
| AC4
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />82
| 82
| <br />GND
| I2C3-SCL-EXT
| <br />-
| P46-3
| <br />-
| D13
| <br />
| I2C interface used for on-board  PMIC configuration<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V<br />     3.3V Power Domain
|-
|-
| <br />83
| 83
| <br />SD1-DATA4
| ET1-RXD2
| <br />GPIO2.06
| P35-1
| <br />U26
| AB4
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />84
| 84
| <br />LVDS1-DATA3_P
| I2C3-SDA-EXT
| <br />-
| P46-2
| <br />C29
| C12
| <br />Dedicated  LVDS interface line
| I2C interface used for on-board  PMIC configuration<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V<br />     3.3V Power Domain
|-
|-
| <br />85
| 85
| <br />SD1-DATA1
| ET1-RXD3
| <br />GPIO2.03
| P36-0
| <br />Y28
| AB3
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />86
| 86
| <br />LVDS1-DATA3_N
| I2C2-SCL
| <br />-
| P42-4
| <br />D28
| AC5
| <br />Dedicated  LVDS interface line
| Built-in pull-up resistor 2.2kOhm connected to 3.3V
|-
|-
| <br />87
| 87
| <br />SD1-DATA0
| GND
| <br />GPIO2.02
| Power
| <br />Y29
| -
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
|  
|-
|-
| <br />88
| 88
| <br />GND
| I2C2-SDA
| <br />-
| P42-3
| <br />-
| AH3
| <br />
| Built-in pull-up resistor 2.2kOhm connected to 3.3V
|-
|-
| <br />89
| 89
| <br />GND
| ET1-TX-CTL
| <br />-
| P29-1
| <br />-
| Y1
| <br />
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />90
| 90
| <br />LVDS1-CLK_P
| P19-0
| <br />-
| P19-0
| <br />A28
| B1
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />91
| 91
| <br />SD1-CLK
| ET1-TXC
| <br />GPIO2.00
| P29-0
| <br />W28
| AB2
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />92
| 92
| <br />LVDS1-CLK_N
| P18-0
| <br />-
| P18-0
| <br />B28
| C2
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />93
| 93
| <br />SD1-CMD
| ET1-TXD3
| <br />GPIO2.01
| P31-1
| <br />W29
| Y2
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />94
| 94
| <br />GND
| GND
| <br />-
| Power
| <br />-
| -
| <br />
|  
|-
|-
| <br />95
| 95
| <br />SD1-DATA3
| ET1-TXD2
| <br />GPIO2.05
| P31-0
| <br />V28
| AA1
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />96
| 96
| <br />LVDS1-DATA2_P
| P18-1
| <br />-
| P18-1
| <br />B29
| D3
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />97
| 97
| <br />SD1-DATA2
| ET1-TXD1
| <br />GPIO2.04
| P30-1
| <br />V29
| AA2
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />98
| 98
| <br />LVDS1-DATA2_N
| P45-0
| <br />-
| P45-0
| <br />C28
| A8
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />99
| 99
| <br />SD1-NVCC
| ET1-TXD0
| <br />-
| P30-0
| <br />-
| AB1
| <br />SD1 1.8/3.3V power supply output (controlled by SDIO-VSELECT),  load max. 80 mA
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
|-
|-
| <br />100
| 100
| <br />LVDS1-DATA1_P
| P45-2
| <br />-
| P45-2
| <br />A27
| A9
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />101
| 101
| <br />VDD-3V3
| GND
| <br />-
| Power
| <br />-
| -
| <br />3.3V  power supply output for external accesories, load max. 300mA
|  
|-
|-
| <br />102
| 102
| <br />LVDS1-DATA1_N
| P45-3
| <br />-
| P45-3
| <br />B27
| B9
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />103
| 103
| <br />USB2-VBUS-OC
| USB1-D_N
| <br />GPIO1.15
| Analog I/O
| <br />B5
| -
| <br />3.3V  power domain
|  
|-
|-
| <br />104
| 104
| <br />LVDS1-DATA0_P
| P46-0
| <br />-
| P46-0
| <br />A26
| B10
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />105
| 105
| <br />USB2-VBUS
| USB1-D_P
| <br />
| Analog I/O
| <br />D12
| -
| <br />
|  
|-
|-
| <br />106
| 106
| <br />LVDS1-DATA0_N
| P46-1
| <br />-
| P46-1
| <br />C26
| A10
| <br />Dedicated  LVDS interface line
| 3.3V Power Domain
|-
|-
| <br />107
| 107
| <br />USB2-VBUS-EN
| USB1-OC
| <br />GPIO1.14
| P8-1
| <br />A4
| AJ20
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />108
| 108
| <br />GND
| P45-1
| <br />-
| P45-1
| <br />-
| D12
| <br />
| 3.3V Power Domain
|-
|-
| <br />109
| 109
| <br />USB2-D_P
| USB1-EN
| <br />-
| P8-0
| <br />D14
| AH19
| <br />Dedicated  USB2.0 interface line
| 3.3V Power Domain
|-
|-
| <br />110
| 110
| <br />PCIe-CLK_P
| P1-1
| <br />-
| P1-1
| <br />D16
| A12
| <br />CLKp  line of PCIe interface (serial 100nF is necessary)
| 3.3V Power Domain
|-
|-
| <br />111
| 111
| <br />USB2-D_N
| GND
| <br />-
| Power
| <br />E14
| -
| <br />Dedicated  USB2.0 interface line
|  
|-
|-
| <br />112
| 112
| <br />PCIe-CLK_N
| P3-1
| <br />-
| P3-1
| <br />E16
| B14
| <br />CLKn  line of PCIe interface (serial 100nF is necessary)
| 3.3V Power Domain
|-
|-
| <br />113
| 113
| <br />USB2-ID
| USB0-OC
| <br />
| P5-0
| <br />E12
| AJ4
| <br />Dedicated  USB2.0 interface line
| 3.3V Power Domain
|-
|-
| <br />114
| 114
| <br />GND
| P1-0
| <br />-
| P1-0
| <br />-
| C13
| <br />
| 3.3V Power Domain
|-
|-
| <br />115
| 115
| <br />USB2-SS-RX_P
| USB0-EN
| <br />-
| P4-0
| <br />A12
| AJ5
| <br />Dedicated  USB3.0 interface line
| 3.3V Power Domain
|-
|-
| <br />116
| 116
| <br />PCIe-TXN_P
| GND
| <br />-
| Power
| <br />A15
| -
| <br />TXp  line of PCIe interface (serial 100nF is necessary)
|  
|-
|-
| <br />117
| 117
| <br />USB2-SS-RX_N
| USB0-ID
| <br />-
| P5-1
| <br />B12
| AH4
| <br />Dedicated  USB3.0 interface line
| 3.3V Power Domain
|-
|-
| <br />118
| 118
| <br />PCIe-TXN_N
| P3-0
| <br />-
| P3-0
| <br />B15
| A14
| <br />TXn  line of PCIe interface (serial 100nF is necessary)
| 3.3V Power Domain
|-
|-
| <br />119
| 119
| <br />USB2-SS-TX_N
| USB0-D_N
| <br />-
| Analog I/O
| <br />B13
| -
| <br />Dedicated  USB3.0 interface line
|  
|-
|-
| <br />120
| 120
| <br />GND
| P48-2
| <br />-
| P48-2
| <br />-
| A22
| <br />
| 3.3V Power Domain
|-
|-
| <br />121
| 121
| <br />USB2-SS-TX_P
| USB0-D_P
| <br />-
| Analog I/O
| <br />A13
| -
| <br />Dedicated  USB3.0 interface line
|  
|-
|-
| <br />122
| 122
| <br />PCIe-RXN_P
| P4-1
| <br />-
| P4-1
| <br />A14
| AH6
| <br />TXn  line of PCIe interface
| 3.3V Power Domain
|-
|-
| <br />123
| 123
| <br />GND
| USB0-VBUS
| <br />-
| Dedicated input
| <br />-
| AH10
| <br />
| 3.3V Power Domain
|-
|-
| <br />124
| 124
| <br />PCIe-RXN_N
| P7-2
| <br />-
| P7-2
| <br />B14
| AJ19
| <br />TXn  line of PCIe interface
| 3.3V Power Domain
|-
|-
| <br />125
| 125
| <br />USB1-VBUS-OC
| GND
| <br />GPIO1.13
| Power
| <br />A6
| -
| <br />3.3V  power domain
|  
|-
|-
| <br />126
| 126
| <br />GND
| GND
| <br />-
| Power
| <br />-
| -
| <br />
|  
|-
|-
| <br />127
| 127
| <br />USB1-VBUS
| P11-1
| <br />-
| P11-1
| <br />A11
| AF22
| <br />Dedicated  USB2.0 interface line
| 3.3V Power Domain
|-
|-
| <br />128
| 128
| <br />GPIO1.08
| P11-0
| <br />GPIO1.08
| P11-0
| <br />A8
| AG22
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />129
| 129
| <br />USB1-VBUS-EN
| P8-2
| <br />GPIO1.12
| P8-2
| <br />A5
| AH20
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />130
| 130
| <br />GPIO1.09
| P12-0
| <br />GPIO1.09
| P12-0
| <br />B8
| AE22
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />131
| 131
| <br />USB1-D_P
| P9-1
| <br />-
| P9-1
| <br />D10
| AH21
| <br />Dedicated  USB2.0 interface line
| 3.3V Power Domain
|-
|-
| <br />132
| 132
| <br />GPIO1.00
| P13-1
| <br />-
| P13-1
| <br />A7
| AG23
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />133
| 133
| <br />USB1-D_N
| P9-0
| <br />-
| P9-0
| <br />E10
| AJ21
| <br />Dedicated  USB2.0 interface line
| 3.3V Power Domain
|-
|-
| <br />134
| 134
| <br />GPIO1.10
| SPI1-SSL
| <br />-
| P44-3
| <br />B7
| B19
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />135
| 135
| <br />USB1-ID
| SPI0-SSL
| <br />-
| P43-3
| <br />B11
| B19
| <br />Dedicated  USB2.0 interface line
| 3.3V Power Domain
|-
|-
| <br />136
| 136
| <br />GPIO1.01
| SPI1-MISO
| <br />-
| P44-2
| <br />E8
| D18
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />137
| 137
| <br />USB1-SS-RX_P
| SPI0-MISO
| <br />-
| P43-2
| <br />A9
| E18
| <br />Dedicated  USB3.0 interface line
| 3.3V Power Domain
|-
|-
| <br />138
| 138
| <br />GPIO1.11
| SPI1-MOSI
| <br />-
| P44-1
| <br />D8
| F17
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />139
| 139
| <br />USB1-SS-RX_N
| SPI0-MOSI
| <br />-
| P43-1
| <br />B9
| D17
| <br />Dedicated  USB3.0 interface line
| 3.3V Power Domain
|-
|-
| <br />140
| 140
| <br />GPIO1.07
| SPI1-CLK
| <br />-
| P44-0
| <br />F6
| A19
| <br />3.3V   power domain
| 3.3V Power Domain
|-
|-
| <br />141
| 141
| <br />USB1-SS-TX_N
| SPI0-CLK
| <br />-
| P43-0
| <br />C10
| B18
| <br />Dedicated  USB3.0 interface line
| 3.3V Power Domain
|-
|-
| <br />142
| 142
| <br />GPIO1.03
| GND
| <br />-
| Power
| <br />D6
| -
| <br />3.3V  power domain
|  
|-
|-
| <br />143
| 143
| <br />USB1-SS-TX_P
| GND
| <br />-
| Power
| <br />A10
| -
| <br />Dedicated  USB3.0 interface line
|  
|-
|-
| <br />144
| 144
| <br />GPIO1.04
| I2C1-SCL
| <br />-
| Dedicated I2C line
| <br />E6
| C23
| <br />3.3V   power domain
| RIIC1_SCL<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V
|-
|-
| <br />145
| 145
| <br />GND
| P14-0
| <br />-
| P14-0
| <br />-
| AF27
| <br />
| 3.3V Power Domain
|-
|-
| <br />146
| 146
| <br />GPIO1.05
| I2C1-SDA
| <br />-
| Dedicated I2C line
| <br />B4
| A24
| <br />3.3V   power domain
| RIIC1_SDA<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V
|-
|-
| <br />147
| 147
| <br />ENET2-INT
| P10-1
| <br />GPIO4.19
| P10-1
| <br />AJ13
| AH22
| <br />1.8V power domain
| 3.3V Power Domain
|-
|-
| <br />148
| 148
| <br />GPIO1.06
| I2C0-SCL
| <br />-
| Dedicated I2C line
| <br />A3
| B24
| <br />3.3V   power domain
| RIIC0_SCL<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V
|-
|-
| <br />149
| 149
| <br />ENET2-RXC
| P10-0
| <br />GPIO4.11
| P10-0
| <br />AJ12
| AJ22
| <br />1.8V power domain
| 3.3V Power Domain
|-
|-
| <br />150
| 150
| <br />SYS-LED
| I2C0-SDA
| <br />GPIO4.27
| Dedicated I2C line
| <br />AH15
| A25
| <br />3.3V   power domain
| RIIC0_SDA<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V
|-
|-
| <br />151
| 151
| <br />ENET2-RX-CTL
| P15-0
| <br />GPIO4.10
| P15-0
| <br />AF12
| AH23
| <br />1.8V power domain
| 3.3V Power Domain
|-
|-
| <br />152
| 152
| <br />RECOVERY
| GND
| <br />-
| Power
| <br />G10
| -
| <br />Recovery  input (BOOT-MODE0):<br />  <br />=0  during reset – start eMMC recovering<br />  <br />=1  or NC – normal operation
|  
|-
|-
| <br />153
| 153
| <br />ENET2-RXD0
| P14-1
| <br />GPIO4.06
| P14-1
| <br />AD10
| AJ23
| <br />1.8V power domain
| 3.3V Power Domain
|-
|-
| <br />154
| 154
| <br />I2C4-SCL
| ADC-CH7
| <br />GPIO5.20
| colspan="2" | Dedicated analog input
| <br />AF8
| 12-bit ADC, max. 1.8V on input
| <br />3.3V  power domain
|-
|-
| <br />155
| 155
| <br />ENET2-RXD1
| P16-0
| <br />GPIO4.07
| P16-0
| <br />AE10
| AH24
| <br />1.8V power domain
| 3.3V Power Domain
|-
|-
| <br />156
| 156
| <br />I2C4-SDA
| ADC-CH6
| <br />GPIO5.21
| colspan="2" | Dedicated analog input
| <br />AD8
| 12-bit ADC, max. 1.8V on input
| <br />3.3V  power domain
|-
|-
| <br />157
| 157
| <br />ENET2-RXD2
| P15-1
| <br />GPIO4.04
| P15-1
| <br />AH9
| AJ24
| <br />1.8V power domain
| 3.3V Power Domain
|-
|-
| <br />158
| 158
| <br />I2C1-SCL
| ADC-CH5
| <br />GPIO5.14
| colspan="2" | Dedicated analog input
| <br />AC8
| 12-bit ADC, max. 1.8V on input
| <br />3.3V  power domain
|-
|-
| <br />159
| 159
| <br />ENET2-RXD3
| P17-0
| <br />GPIO4.05
| P17-0
| <br />AJ8
| AH25
| <br />1.8V power domain
| 3.3V Power Domain
|-
|-
| <br />160
| 160
| <br />I2C1-SDA
| ADC-CH4
| <br />GPIO5.15
| colspan="2" | Dedicated analog input
| <br />AH7
| 12-bit ADC, max. 1.8V on input
| <br />3.3V  power domain
|-
|-
| <br />161
| 160
| <br />GND
| SSI-MCLK
| <br />-
| AUDIO-CLK
| <br />-
| E12
| <br />
| Reference clock output (for audio codec)
|-
|-
| <br />162
| 161
| <br />GND
| P16-1
| <br />-
| P16-1
| <br />-
| AJ25
| <br />
| 3.3V Power Domain
|-
|-
| <br />163
| 162
| <br />ENET2-TXC
| ADC-CH3
| <br />GPIO4.17
| colspan="2" | Dedicated analog input
| <br />AH14
| 12-bit ADC, max. 1.8V on input
| <br />1.8V power domain
|-
|-
| <br />164
| 163
| <br />CSI2-DATA3_P
| P17-2
| <br />-
| P17-2
| <br />A21
| AH26
| <br />MIPI-CSI  video input channel
| 3.3V Power Domain
|-
|-
| <br />165
| 164
| <br />ENET2-TX-CTL
| ADC-CH2
| <br />GPIO4.16
| colspan="2" | Dedicated analog input
| <br />AH13
| 12-bit ADC, max. 1.8V on input
| <br />1.8V power domain
|-
|-
| <br />166
| 165
| <br />CSI2-DATA3_N
| P17-1
| <br />-
| P17-1
| <br />B21
| AJ26
| <br />MIPI-CSI  video input channel
| 3.3V Power Domain
|-
|-
| <br />167
| 166
| <br />ENET2-TXD0
| ADC-CH1
| <br />GPIO4.12
| colspan="2" | Dedicated analog input
| <br />AJ11
| 12-bit ADC, max. 1.8V on input
| <br />1.8V power domain
|-
|-
| <br />168
| 167
| <br />CSI2-DATA2_P
| P13-2
| <br />-
| P13-2
| <br />A22
| AG26
| <br />MIPI-CSI  video input channel
| 3.3V Power Domain
|-
|-
| <br />169
| 168
| <br />ENET2-TXD1
| ADC-CH0
| <br />GPIO4.13
| colspan="2" | Dedicated analog input
| <br />AJ10
| 12-bit ADC, max. 1.8V on input
| <br />1.8V power domain
|-
|-
| <br />170
| 169
| <br />CSI2-DATA2_N
| GND
| <br />-
| Power
| <br />B22
| -
| <br />MIPI-CSI  video input channel
|  
|-
|-
| <br />171
| 170
| <br />ENET2-TXD2
| GND
| <br />GPIO4.14
| Power
| <br />AH11
| -
| <br />1.8V power domain
|  
|-
|-
| <br />172
| 171
| <br />CSI2-DATA1_P
| DSI-DATA3_P
| <br />-
| Analog I/O
| <br />A24
| AH18
| <br />MIPI-CSI  video input channel
| MIPI-DSI line
|-
|-
| <br />173
| 172
| <br />ENET2-TXD3
| CSI-DATA3_N
| <br />GPIO4.15
| Analog I/O
| <br />AD12
| AH11
| <br />1.8V power domain
| MIPI-CSI line
|-
|-
| <br />174
| 173
| <br />CSI2-DATA1_N
| DSI-DATA3_N
| <br />-
| Analog I/O
| <br />B24
| AJ18
| <br />MIPI-CSI  video input channel
| MIPI-DSI line
|-
|-
| <br />175
| 174
| <br />ENET2-MDIO
| CSI-DATA3_P
| <br />GPIO4.05
| Analog I/O
| <br />AJ8
| AJ11
| <br />1.8V power domain
| MIPI-CSI line
|-
|-
| <br />176
| 175
| <br />CSI2-DATA0_P
| GND
| <br />-
| Power
| <br />A25
| -
| <br />MIPI-CSI  video input channel
|  
|-
|-
| <br />177
| 176
| <br />ENET2-MDC
| GND
| <br />GPIO4.04
| Power
| <br />AH9
| -
| <br />1.8V power domain
|  
|-
|-
| <br />178
| 177
| <br />CSI2-DATA0_N
| DSI-DATA2_P
| <br />-
| Analog I/O
| <br />B25
| AH15
| <br />MIPI-CSI  video input channel
| MIPI-DSI line
|-
|-
| <br />179
| 178
| <br />ENET2-RST
| CSI-DATA2_N
| <br />GPIO4.18
| Analog I/O
| <br />AC12
| AH14
| <br />1.8V power domain
| MIPI-CSI line
|-
|-
| <br />180
| 179
| <br />GND
| DSI-DATA2_N
| <br />-
| Analog I/O
| <br />-
| AJ15
| <br />
| MIPI-DSI line
|-
|-
| <br />181
| 180
| <br />ENET2-EV1-OUT
| CSI-DATA2_P
| <br />GPIO4.03
| Analog I/O
| <br />AF10
| AJ14
| <br />1.8V power domain
| MIPI-CSI line
|-
|-
| <br />182
| 181
| <br />CSI2-CLK_P
| GND
| <br />-
| Power
| <br />A23
| -
| <br />MIPI-CSI  video input channel
|  
|-
|-
| <br />183
| 182
| <br />ENET2-EV1-IN
| GND
| <br />GPIO4.02
| Power
| <br />AC10
| -
| <br />1.8V power domain
|  
|-
|-
| <br />184
| 183
| <br />CSI2-CLK_N
| DSI-CLK_P
| <br />-
| Analog I/O
| <br />B23
| AG17
| <br />MIPI-CSI  video input channel
| MIPI-DSI line
|-
|-
| <br />185
| 184
| <br />ENET2-EV0-OUT
| CSI-CLK_N
| <br />GPIO4.01
| Analog I/O
| <br />AH8
| AG12
| <br />1.8V power domain
| MIPI-CSI line
|-
|-
| <br />186
| 185
| <br />GND
| DSI-CLK_N
| <br />-
| Analog I/O
| <br />-
| AG18
| <br />
| MIPI-DSI line
|-
|-
| <br />187
| 186
| <br />ENET2-EV0-IN
| CSI-CLK_P
| <br />GPIO4.00
| Analog I/O
| <br />AJ9
| AG13
| <br />1.8V power domain
| MIPI-CSI line
|-
|-
| <br />188
| 187
| <br />CSI1-DATA3_N
| GND
| <br />-
| Power
| <br />E26
| -
| <br />MIPI-CSI  video input channel
|  
|-
|-
| <br />189
| 188
| <br />VDD-1V8
| GND
| <br />-
| Power
| <br />-
| -
| <br />1.8V voltage output for external accesories, load max. 400 mA
|  
|-
|-
| <br />190
| 189
| <br />CSI1-DATA3_P
| DSI-DATA1_P
| <br />-
| Analog I/O
| <br />D26
| AH17
| <br />MIPI-CSI  video input channel
| MIPI-DSI line
|-
|-
| <br />191
| 190
| <br />GND
| CSI-DATA1_N
| <br />-
| Analog I/O
| <br />-
| AH12
| <br />
| MIPI-CSI line
|-
|-
| <br />192
| 191
| <br />CSI1-DATA2_N
| DSI-DATA1_N
| <br />-
| Analog I/O
| <br />E24
| AJ17
| <br />MIPI-CSI  video input channel
| MIPI-DSI line
|-
|-
| <br />193
| 192
| <br />ENET1-INT
| CSI-DATA1_P
| <br />GPIO4.20
| Analog I/O
| <br />AE12
| AJ12
| <br />1.8V power domain
| MIPI-CSI line
|-
|-
| <br />194
| 193
| <br />CSI1-DATA2_P
| GND
| <br />-
| Power
| <br />D24
| -
| <br />MIPI-CSI  video input channel
|  
|-
|-
| <br />195
| 194
| <br />ENET1-RXC
| GND
| <br />GPIO1.25
| Power
| <br />AE29
| -
| <br />1.8V power domain
|  
|-
|-
| <br />196
| 195
| <br />CSI1-DATA1_N
| DSI-DATA0_P
| <br />-
| Analog I/O
| <br />E20
| AH16
| <br />MIPI-CSI  video input channel
| MIPI-DSI line
|-
|-
| <br />197
| 196
| <br />ENET1-RX-CTL
| CSI-DATA0_N
| <br />GPIO1.24
| Analog I/O
| <br />AE28
| AH13
| <br />1.8V power domain
| MIPI-CSI line
|-
|-
| <br />198
| 197
| <br />CSI1-DATA1_P
| DSI-DATA0_N
| <br />-
| Analog I/O
| <br />D20
| AJ16
| <br />MIPI-CSI  video input channel
| MIPI-DSI line
|-
|-
| <br />199
| 198
| <br />ENET1-RXD0
| CSI-DATA0_P
| <br />GPIO1.26
| Analog I/O
| <br />AG29
| AJ13
| <br />1.8V power domain
| MIPI-CSI line
|-
|-
| <br />200
| 199
| <br />CSI1-DATA0_N
| GND
| <br />-
| Power
| <br />E18
| -
| <br />MIPI-CSI  video input channel
|  
|-
|-
| <br />201
| 200
| <br />ENET1-RXD1
| GND
| <br />GPIO1.27
| Power
| <br />AG28
| -
| <br />1.8V power domain
|  
|-
|-
| <br />202
| -
| <br />CSI1-DATA0_P
| WLAN-ENABLE
| <br />-
| P40-2
| <br />D18
| A17
| <br />MIPI-CSI  video input channel
| 1DX radio module line  (WiFi)<br />     Not available externally
|-
|-
| <br />203
| -
| <br />ENET1-RXD2
| WLAN-H-WAKE
| <br />GPIO1.28
| P19-1
| <br />AF29
| B2
| <br />1.8V power domain
| 1DX radio module line  (WiFi)<br />     Not available externally
|-
|-
| <br />204
| -
| <br />GND
| SD1-CLK
| <br />-
| -
| <br />-
| H3
| <br />
| 1DX radio module line  (WiFi)<br />     Not available externally
|-
|-
| <br />205
| -
| <br />ENET1-RXD3
| SD1-CMD
| <br />GPIO1.29
| -
| <br />AF28
| J2
| <br />1.8V power domain
| 1DX radio module line  (WiFi)<br />     Not available externally
|-
|-
| <br />206
| -
| <br />CSI1-CLK_N
| SD1-DATA0
| <br />-
| -
| <br />E22
| H1
| <br />MIPI-CSI  video input channel
| 1DX radio module line  (WiFi)<br />     Not available externally
|-
|-
| <br />207
| -
| <br />GND
| SD1-DATA1
| <br />-
| -
| <br />-
| H2
| <br />
| 1DX radio module line  (WiFi)<br />     Not available externally
|-
|-
| <br />208
| -
| <br />CSI1-CLK_P
| SD1-DATA2
| <br />-
| -
| <br />D22
| K2
| <br />MIPI-CSI  video input channel
| 1DX radio module line  (WiFi)<br />     Not available externally
|-
|-
| <br />209
| -
| <br />ENET1-TXC
| SD1-DATA3
| <br />GPIO1.23
| -
| <br />AE24
| J1
| <br />1.8V power domain
| 1DX radio module line  (WiFi)<br />     Not available externally
|-
|-
| <br />210
| -
| <br />GND
| UART2-RXD
| <br />-
| P48-1
| <br />-
| B23
| <br />
| 1DX radio module line  (BLE)<br />     Not available externally
|-
|-
| <br />211
| -
| <br />ENET1-TX-CTL
| UART2-TXD
| <br />GPIO1.22
| P48-0
| <br />AF24
| B22
| <br />1.8V  power domain
| 1DX radio module line  (BLE)<br />     Not available externally
|-
|-
| <br />212
| -
| <br />DSI-CLK_P
| UART2-RTS
| <br />-
| P48-4
| <br />A18
| B23
| <br />DSI1  video output channel
| 1DX radio module line  (BLE)<br />     Not available externally
|-
|-
| <br />213
| -
| <br />ENET1-TXD0
| UART2-CTS
| <br />GPIO1.25
| P48-3
| <br />AC25
| C22
| <br />1.8V power domain
| 1DX radio module line  (BLE)<br />     Not available externally
|-
|-
| <br />214
| -
| <br />DSI-CLK_N
| BT-DEV-WAKE
| <br />-
| P39-0
| <br />B18
| A16
| <br />DSI1  video output channel
| 1DX radio module line  (BLE)<br />     Not available externally
|-
|-
| <br />215
| -
| <br />ENET1-TXD1
| BT-HOST-WAKE
| <br />GPIO1.20
| P39-1
| <br />AE26
| C15
| <br />1.8V power domain
| 1DX radio module line  (BLE)<br />     Not available externally
|-
|-
| <br />216
| -
| <br />GND
| BT-REG-ON
| <br />-
| P39-3
| <br />-
| B16
| <br />
| 1DX radio module line  (BLE)<br />     Not available externally
|-
|-
| <br />217
| -
| <br />ENET1-TXD2
| JTAG-TMS
| <br />GPIO1.19
|  
| <br />AF26
| AD2
| <br />1.8V power domain
| JTAG interface<br />     1.8V Power Domain
|-
|-
| <br />218
| -
| <br />DSI-DATA0_P
| JTAG-TCK
| <br />-
|  
| <br />A16
| AE1
| <br />DSI1  video output channel
| JTAG interface<br />     1.8V Power Domain
|-
|-
| <br />219
| -
| <br />ENET1-TXD3
| JTAG-TDO
| <br />GPIO1.18
|  
| <br />AD24
| AE2
| <br />1.8V power domain
| JTAG interface<br />     1.8V Power Domain
|-
|-
| <br />220
| -
| <br />DSI-DATA0_N
| JTAG-TDI
| <br />-
|  
| <br />B16
| AF1
| <br />DSI1  video output channel
| JTAG interface<br />     1.8V Power Domain
|-
|-
| <br />221
| -
| <br />ENET1-MDIO
| JTAG-TRST
| <br />GPIO1.17
|  
| <br />AH29
| AF2
| <br />1.8V power domain
| JTAG interface<br />     1.8V Power Domain
|-
|-
| <br />222
| -
| <br />DSI-DATA1_P
| QSPI-CLK
| <br />-
|  
| <br />A17
| C4
| <br />DSI1   video output channel
| Optional on-board QSPI Flash   (W25Q128FWPIG)
|-
|-
| <br />223
| -
| <br />ENET1-MDC
| QSPI-IO0
| <br />GPIO1.16
|  
| <br />AH28
| A3
| <br />1.8V power domain
| Optional on-board QSPI Flash  (W25Q128FWPIG)
|-
|-
| <br />224
| -
| <br />DSI-DATA1_N
| QSPI-IO1
| <br />-
|  
| <br />B17
| B3
| <br />DSI1   video output channel
| Optional on-board QSPI Flash   (W25Q128FWPIG)
|-
|-
| <br />225
| -
| <br />ENET1-RST
| QSPI-IO2
| <br />
|  
| <br />T28
| A4
| <br />1.8V power domain
| Optional on-board QSPI Flash  (W25Q128FWPIG)
|-
|-
| <br />226
| -
| <br />DSI-DATA2_P
| QSPI-IO3
| <br />-
|  
| <br />A19
| B4
| <br />DSI1   video output channel
| Optional on-board QSPI Flash   (W25Q128FWPIG)
|-
|-
| <br />227
| -
| <br />GPIO3.24
| QSPI-SS
| <br />-
|
| <br />AE14
| A2
| <br />1.8V power domain
| Optional on-board QSPI Flash  (W25Q128FWPIG)
|}
 
== JTAG Connector ==
[[File:VisionSOM-x2L-JTAG-Connector.jpg|650px|center]]
 
{| class="wikitable"
|-
|-
| <br />228
! Connector pin number
| <br />DSI-DATA2_N
! Default function
| <br />-
! GPIO
| <br />B19
! BGA456 ball
| <br />DSI1  video output channel
! Notes
|-
|-
| <br />229
| JTAG-CONN-1
| <br />GPIO3.23
| VDD-1V8
| <br />-
| -
| <br />AF16
| -
| <br />1.8V power domain
|  
|-
|-
| <br />230
| JTAG-CONN-2
| <br />DSI-DATA3_P
| TMS (SWDIO)
| <br />-
| -
| <br />A20
| AD2
| <br />DSI1  video output channel
| 10kOhm pull-up
|-
|-
| <br />231
| JTAG-CONN-3
| <br />GPIO3.22
| TCK (SWDCLK)
| <br />-
| -
| <br />AD16
| AE1
| <br />1.8V power domain
| 10kOhm pull-up
|-
|-
| <br />232
| JTAG-CONN-4
| <br />DSI-DATA3_N
| TDO
| <br />-
| -
| <br />B20
| AE2
| <br />DSI1  video output channel
| 10kOhm pull-up
|-
|-
| <br />233
| JTAG-CONN-5
| <br />NC
| TDI
| <br />-
| -
| <br />-
| AF1
| <br />
| 10kOhm pull-up
|-
|-
| <br />234
| JTAG-CONN-6
| <br />GND
| TRST
| <br />-
| -
| <br />-
| AF2
| <br />
| 10kOhm pull-up
|-
|-
| <br />235
| JTAG-CONN-7
| <br />NC
| DEBUG EN
| <br />-
| -
| <br />-
| AE18
| <br />
| 10kOhm pull-down
|-
|-
| <br />236
| JTAG-CONN-8
| <br />NC
| GND
| <br />-
| -
| <br />-
| -
| <br />
| -
|-
| <br />237
| <br />NC
| <br />-
| <br />-
| <br />
|-
| <br />238
| <br />NC
| <br />-
| <br />-
| <br />
|-
| <br />239
| <br />GND
| <br />-
| <br />-
| <br />
|-
| <br />240
| <br />PWR-ON
| <br />-
| <br />G22
| <br />ONOFF MPU input<br />  <br />1.8V power domain
|-
| <br />241
| <br />I2C6-SCL
| <br />GPIO3.19
| <br />AC14
| <br />I2C6  is used to communication with PMIC PCA9450CHN with internal 1V8 pull-ups. <br />  <br />Externally  compatible with 3.3V logic standards.
|-
| <br />242
| <br />SYS-RST
| <br />-
| <br />J29
| <br />Buffered,  open-drain POR-B output
|-
| <br />243
| <br />I2C6-SDA
| <br />GPIO3.20
| <br />AD14
| <br />I2C6  is used to communication with PMIC PCA9450CHN with internal 1V8 pull-ups. <br />  <br />Externally  compatible with 3.3V logic standards.
|-
| <br />244
| <br />RST-IN
| <br />-
| <br />-
| <br />PMIC_RST_B  input (system reset generated by PMIC)
|-
| <br />245
| <br />VDD5V
| <br />-
| <br />-
| <br />External  5V input
|-
| <br />246
| <br />GND
| <br />-
| <br />-
| <br />
|-
| <br />247
| <br />VDD5V
| <br />-
| <br />-
| <br />External  5V input
|-
| <br />248
| <br />GND
| <br />-
| <br />-
| <br />
|-
| <br />249
| <br />VDD5V
| <br />-
| <br />-
| <br />External  5V input
|-
| <br />250
| <br />GND
| <br />-
| <br />-
| <br />
|-
| <br />251
| <br />VDD5V
| <br />-
| <br />-
| <br />External  5V input
|-
| <br />252
| <br />GND
| <br />-
| <br />-
| <br />
|-
| <br />253
| <br />VDD5V
| <br />-
| <br />-
| <br />External  5V input
|-
| <br />254
| <br />GND
| <br />-
| <br />-
| <br />
|-
| <br />255
| <br />VDD5V
| <br />-
| <br />-
| <br />External  5V input
|-
| <br />256
| <br />GND
| <br />-
| <br />-
| <br />
|-
| <br />257
| <br />VDD5V
| <br />-
| <br />-
| <br />External  5V input
|-
| <br />258
| <br />GND
| <br />-
| <br />-
| <br />
|-
| <br />259
| <br />VDD5V
| <br />-
| <br />-
| <br />External  5V input
|-
| <br />260
| <br />GND
| <br />-
| <br />-
| <br />
|-
| <br />-
| <br />PMIC-INT
| <br />GPIO3.25
| <br />AF14
| <br />Interrupt  line connected to IRQ_B PMIC PCA9450CHN
|-
| <br />-
| <br />SDIO-VSELECT
| <br />GPIO3.21
| <br />AE16
| <br />Control  line for SDIO1 power supply voltage (LDO5 in PMIC PCA9450CHN, SDIO-VSELECT)
|-
| <br />-
| <br />GPIO1.02
| <br />-
| <br />B6
| <br />WDOG-B
|-
| <br />-
| <br />BT-CTS
| <br />-
| <br />AJ14
| <br />1ZM  Bluetooth module line (UART1)
|-
| <br />-
| <br />BT-TXD
| <br />-
| <br />AH17
| <br />1ZM  Bluetooth module line (UART1)
|-
| <br />-
| <br />BT-RTS
| <br />-
| <br />AJ17
| <br />1ZM  Bluetooth module line (UART1)
|-
| <br />-
| <br />BT-RXD
| <br />-
| <br />AJ16
| <br />1ZM  Bluetooth module line (UART1)
|-
| <br />-
| <br />BT-H-WAKE
| <br />GPIO2.20
| <br />AC26
| <br />1ZM  Bluetooth module line
|-
| <br />-
| <br />NAND_D0
| <br />QSPI-D0
| <br />R25
| <br />Connection  for optional QSPI NOR Flash
|-
| <br />-
| <br />NAND_D1
| <br />QSPI-D1
| <br />L25
| <br />Connection  for optional QSPI NOR Flash
|-
| <br />-
| <br />NAND_D2
| <br />QSPI-D2
| <br />L24
| <br />Connection  for optional QSPI NOR Flash
|-
| <br />-
| <br />NAND_D3
| <br />QSPI-D3
| <br />N24
| <br />Connection  for optional QSPI NOR Flash
|-
| <br />-
| <br />NAND_ALE
| <br />QSPI-CLK
| <br />N25
| <br />Connection  for optional QSPI NOR Flash
|-
| <br />-
| <br />NAND_CE0_B
| <br />QSPI-CS
| <br />L26
| <br />Connection  for optional QSPI NOR Flash
|-
| <br />-
| <br />WLAN-H-WAKE
| <br />GPIO2.19
| <br />AD28
| <br />1ZM  WiFi module line
|-
| <br />-
| <br />WLAN-ENABLE
| <br />GPIO2.12
| <br />AD29
| <br />1ZM  WiFi module line
|}
|}


== Dimensions ==
== Dimensions ==
[[File:SpaceSOM-8Mplus-dimensions.png|650px|center]]
[[File:visionsom-x2l-dimensions.png|650px|center]]

Latest revision as of 09:14, 4 January 2024

VisionSOM-V2L Datasheet and Pinout

General description

The VisionSOM-V2L family is a SODIMM-sized SoM based on the Renesas dual core RZ/V2L application processor which features an advanced implementation of DRP-AI (ML+AI) coprocessor. The VisionSOM-V2L family offers energy efficient dual ARM Cortex-A55 cores (at speed up to 1.2GHz) and ARM Cortex-M33 core (at speed up to 200MHz) as well as a 3D Graphics Processing Unit (ARM Mali-G31 GPU @500MHz, 1920x1080 @60fps) with Open GL 3.2ES/OpenCL 2.0 (Full Profile) capabilities and Video Codec Processor (VCP) with 1920x1080 @30fps.

The VisionSOM-V2L is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power, optinally integrated 2.4GHz Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-V2L provides a variety memory configuration, including 1GB of fast and efficient DDR4 and eMMC Flash that meets our customers requirements.

The SoM supports connections to a variety of interfaces: two high-speed USB 2.0 with integrated PHY, dual Ethernet 1Gbit, audio, MIPI-DSI display output with optional touch panel, MIPI-CSI camera input with scaling processor, serial communication interfaces including 2xCAN. In addition, the system supports industrial grade embedded applications.

SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.


Applications

  • IoT Edge Devices
  • IoT gateways
  • Machine vision equipment
  • AI+ML Decision/Recognition Systems
  • Robotics
  • Human-machine Interfaces (HMI)
  • IP Cameras
  • Home Appliances
  • Home Automation – Smart Home
  • Residential gateways
  • Industrial embedded Linux computer
  • Fitness/outdoor equipment

Features

  • Powered by dual core Renesas RZ/V2L application processor (R9A07G054L27GBG)
  • Dual ARM Cortex-A55 core at speed up to 1.2GHz
  • ARM Cortex-M33 core at speed up to 200MHz
  • Integrated Machine-Learning (ML) and Artificial Intelligence (AI) AI Accelerator (DRP-AI)
  • Integrated 3D GPU (ARM Mali-G31 @500MHz)
  • 1GB RAM (DDR4)
  • Up to 32GB eMMC memory
  • Optional Murata radio module 2.4GHz Wi-Fi and Bluetooth v5.1
  • Built-in dual USB 2.0 interface
  • Built-in 2xCAN-FD interfaces
  • Built-in MIPI-DSI display interface
  • Built-in MIPI-CSI camera interface
  • Power-efficient and cost-optimized solution
  • Ideal for industrial IoT and embedded applications
  • Integrated security features

Pictures of SOM versions

Version Photo
eMMC
WiFi/BT module is available for all memory configurations.

Ordering info

SLS22CpuType_Clock_RamSize_FlashSize_SF_TEMP
SLSProduct type
SLS - System on Module
2SOM Name
2 - High Performance VisionSOM SODIM200 module
2CPU Family
2 - Renesas RZ/V2L family
CpuTypeCPU Type
RV2LDC - RZ/V2L dual Cortex-A55 + Cortex-M33 + DRP-AI
ClockCPU Clock Speed
1200C - 1.2GHz
RamSizeDDR4 RAM Size
01GR - 1GB (1024MB)
FlashSizeeMMC Memory Size
04GE - 4GB eMMC
08GE - 8GB eMMC
16GE - 16GB eMMC
32GE - 32GB eMMC
SFSpecial Features
0SF - No Special Features
1WB - Built-in 2.4GHz Wi-Fi and Bluetooth v5.1
TEMPOperating Temperature
E - Extended: -25 to +70 C
I - Industrial: -40 to +85 C

Block Diagram

Operating ranges

Parameter Value Unit Comment
Power Supply
5.0
V
 Connected to VDD-5V0 SODIM200 pins
Max. input GPIO voltage
3.3
V
 In 3.3V power domain
Max. input GPIO voltage
1.8
V
 In 1.8V power domain
Environment temperature
-40…+85
 oC Industrial range w/o WiFi module
-25…+70
 Industrial range with WiFi module
0…+70
 Consumer range

Electrical parameters

SOM
signal name 		Parameter Value Unit
Min. Typ. Max.
VDD-5V Supply Voltage (Input) 4.0 5.0 5.5 V
VDD-1V8 Output power supply for external 1.8V accesories - - 0.31 A
VDD-3V3 Output power supply for external 3.3V accesories - - 0.32 A
VGPIO @1V8 GPIO Input Voltage 0 - 2.05 V
VGPIO @3V3 GPIO Input Voltage 0 - 3.62 V
VUSB0-VBUS USB VBUS Input Voltage 0 - 5.253 V
VETH0 I/O voltage for Ethernet 0 0 - 1.8 V
VETH1 I/O voltage for Ethernet 1 0 - 1.8 or 3.34 V
VJTAG I/O voltage for Ethernet 1 0 - 1.85 V
VADC-IN Input voltage for ADC-CHx6 0 - 1.8 V

Notes:
1. Total current on both VDD-1V8 outputs.
1. Total current on both VDD-3V3 outputs.
3. Input current is limited by 1+1,8kOhm resistors (voltage divider) connected in series.
4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-up'ed.).
5. JTAG/SWD interface lines are 1.8V compatible.
6. "x" means 0...7.

SoM pinout

Important notes:
1. Detail pin configurations description you can find, edit and arrange in dedicated SCFG file (with free "Smart Configurator" tool).
2. On-board eMMC memory is connected to SDIO0 interface.
3. Optional on-board QSPI Flash memory is connected to QSPI0 interface.
4. SDIO1 interface is used to communication with Murata 1DX radio module.
5. UART2 is used to communication with BT-BLE interatted with Murata 1DX radio module.
6. I2C3 is used to communication with on-board PMIC.


SOM pin number Default function GPIO BGA456 ball Notes
1 GND Power -
2 GND Power -
3 ET0-PHY-RST P47-1 A20 1.8V Power Domain
GPIO mode not allowed
4 PWR-GOOD Output PMIC power-good signalling for external devices
5 ET0-INT P47-0 B20 3.3V Power Domain
6 PWR-ON Input PMIC PWRON input (on-off function)
Internal pull-down
Connect to GND if not used
Connect to VDD-3V3 with external pull-up resistor (4.7kOhm) and pushbutton to GND if used
7 ET0-MDIO I/O U1 1.8V Power Domain
GPIO mode not allowed
8 PWR-FAIL Input PMIC enable-input:
PWR-FAIL='0' -> SOM power supply is off
PWR-FAIL='1' or left open -> SOM power supply is on
Can bue used as cold-reset input (active low)
9 ET0-MDC I/O U2 1.8V Power Domain
GPIO mode not allowed
10 RESET-OUT Output RESET output for external peripherals
11 GND Power -
12 RESET-IN Input MPU reset input, active low
13 ET0-RXC I/O P2 1.8V Power Domain
GPIO mode not allowed
14 GND Power -
15 ET0-RX-CTL I/O P1 1.8V Power Domain
GPIO mode not allowed
16 UART0-RXD P38-1 B15 3.3V Power Domain
17 ET0-RXD0 I/O R2 1.8V Power Domain
GPIO mode not allowed
18 UART0-TXD P38-0 A15 3.3V Power Domain
19 ET0-RXD1 I/O R1 1.8V Power Domain
GPIO mode not allowed
20 UART1-CTS P41-0 E17 3.3V Power Domain
21 ET0-RXD2 I/O T2 1.8V Power Domain
GPIO mode not allowed
22 UART1-RTS P41-1 A18 3.3V Power Domain
23 ET0-RXD3 I/O T1 1.8V Power Domain
GPIO mode not allowed
24 UART1-RXD P40-0 C17 3.3V Power Domain
25 GND Power -
26 UART1-TXD P40-1 B17 3.3V Power Domain
27 ET0-TX-CTL I/O N2 1.8V Power Domain
GPIO mode not allowed
28 UART4-RXD P2-1 A13 3.3V Power Domain
29 ET0-TXC I/O N1 1.8V Power Domain
GPIO mode not allowed
30 UART4-TXD P2-0 B13 3.3V Power Domain
31 ET0-TXD3 I/O N1 1.8V Power Domain
GPIO mode not allowed
32 UART3-RXD P0-1 B12 3.3V Power Domain
33 ET0-TXD2 I/O L2 1.8V Power Domain
GPIO mode not allowed
34 UART3-TXD P0-0 A11 3.3V Power Domain
35 ET0-TXD1 I/O M2 1.8V Power Domain
GPIO mode not allowed
36 VBAT-RTC Power - RTC 3V battery
37 ET0-TXD0 I/O M1 1.8V Power Domain
GPIO mode not allowed
38 GND Power -
39 VDD-1V8 Power 1.8V output for external devices, max. 300 mA
40 VDD-1V8 Power 1.8V output for external devices, max. 300 mA
41 VDD-5V0 Power External power supply
42 VDD-5V0 Power External power supply
43 VDD-5V0 Power External power supply
44 VDD-5V0 Power External power supply
45 VDD-5V0 Power External power supply
46 VDD-5V0 Power External power supply
47 VDD-5V0 Power External power supply
48 VDD-5V0 Power External power supply
49 VDD-5V0 Power External power supply
50 VDD-5V0 Power External power supply
51 NC Not Connected -
52 NC Not Connected -
53 VDD-3V3 Power 3.3V output for external devices, max. 300mA
54 VDD-3V3 Power - 3.3V output for external devices, max. 300mA
55 GND Power -
56 SYSLED P42-0 AG4 3.3V Power Domain
57 VPROG NC - For SoMLabs purposes only, leave unconnected
58 GND Power -
59 BOOT-RECOVERY Input BOOT input, active low during reset
60 SSI-MCLK AUDIO_CLK1 E12 -
61 GND Power -
62 SSI0-RXD P7-1 AH28 3.3V Power Domain
63 ET1-VDD-SEL Input Ethernet 1 (ET1) interface voltage selection:
ET1-VDD-SEL='0' -> V=1.8V
ET1-VDD-SEL='1' or left open -> V=3.3V
The line has internal pull-up.
64 SSI0-TXD P7-0 AJ28 3.3V Power Domain
65 ET1-PHY-RST P47-3 B21 3.3V Power Domain
66 SSI0-RCK P6-1 AH27 3.3V Power Domain
67 ET1-INT P47-2 A21 3.3V Power Domain
68 SSI0-BCK P6-0 AJ27 3.3V Power Domain
69 ET1-MDIO P37-1 W1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
70 GND Power -
71 ET1-MDC P37-0 W2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
72 CAN1-RX P13-0 AF23 3.3V Power Domain
73 GND Power -
74 CAN1-TX P12-1 AE23 3.3V Power Domain
75 ET1-RXC P33-1 AC1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
76 CAN0-RX P42-2 AJ3 3.3V Power Domain
77 ET1-RX-CTL P34-0 AC2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
78 CAN0-TX P42-1 AE7 3.3V Power Domain
79 ET1-RXD0 P34-1 AC3 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
80 GND Power -
81 ET1-RXD1 P35-0 AC4 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
82 I2C3-SCL-EXT P46-3 D13 I2C interface used for on-board PMIC configuration
Built-in pull-up resistor 2.2kOhm connected to 3.3V
3.3V Power Domain
83 ET1-RXD2 P35-1 AB4 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
84 I2C3-SDA-EXT P46-2 C12 I2C interface used for on-board PMIC configuration
Built-in pull-up resistor 2.2kOhm connected to 3.3V
3.3V Power Domain
85 ET1-RXD3 P36-0 AB3 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
86 I2C2-SCL P42-4 AC5 Built-in pull-up resistor 2.2kOhm connected to 3.3V
87 GND Power -
88 I2C2-SDA P42-3 AH3 Built-in pull-up resistor 2.2kOhm connected to 3.3V
89 ET1-TX-CTL P29-1 Y1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
90 P19-0 P19-0 B1 3.3V Power Domain
91 ET1-TXC P29-0 AB2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
92 P18-0 P18-0 C2 3.3V Power Domain
93 ET1-TXD3 P31-1 Y2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
94 GND Power -
95 ET1-TXD2 P31-0 AA1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
96 P18-1 P18-1 D3 3.3V Power Domain
97 ET1-TXD1 P30-1 AA2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
98 P45-0 P45-0 A8 3.3V Power Domain
99 ET1-TXD0 P30-0 AB1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
100 P45-2 P45-2 A9 3.3V Power Domain
101 GND Power -
102 P45-3 P45-3 B9 3.3V Power Domain
103 USB1-D_N Analog I/O -
104 P46-0 P46-0 B10 3.3V Power Domain
105 USB1-D_P Analog I/O -
106 P46-1 P46-1 A10 3.3V Power Domain
107 USB1-OC P8-1 AJ20 3.3V Power Domain
108 P45-1 P45-1 D12 3.3V Power Domain
109 USB1-EN P8-0 AH19 3.3V Power Domain
110 P1-1 P1-1 A12 3.3V Power Domain
111 GND Power -
112 P3-1 P3-1 B14 3.3V Power Domain
113 USB0-OC P5-0 AJ4 3.3V Power Domain
114 P1-0 P1-0 C13 3.3V Power Domain
115 USB0-EN P4-0 AJ5 3.3V Power Domain
116 GND Power -
117 USB0-ID P5-1 AH4 3.3V Power Domain
118 P3-0 P3-0 A14 3.3V Power Domain
119 USB0-D_N Analog I/O -
120 P48-2 P48-2 A22 3.3V Power Domain
121 USB0-D_P Analog I/O -
122 P4-1 P4-1 AH6 3.3V Power Domain
123 USB0-VBUS Dedicated input AH10 3.3V Power Domain
124 P7-2 P7-2 AJ19 3.3V Power Domain
125 GND Power -
126 GND Power -
127 P11-1 P11-1 AF22 3.3V Power Domain
128 P11-0 P11-0 AG22 3.3V Power Domain
129 P8-2 P8-2 AH20 3.3V Power Domain
130 P12-0 P12-0 AE22 3.3V Power Domain
131 P9-1 P9-1 AH21 3.3V Power Domain
132 P13-1 P13-1 AG23 3.3V Power Domain
133 P9-0 P9-0 AJ21 3.3V Power Domain
134 SPI1-SSL P44-3 B19 3.3V Power Domain
135 SPI0-SSL P43-3 B19 3.3V Power Domain
136 SPI1-MISO P44-2 D18 3.3V Power Domain
137 SPI0-MISO P43-2 E18 3.3V Power Domain
138 SPI1-MOSI P44-1 F17 3.3V Power Domain
139 SPI0-MOSI P43-1 D17 3.3V Power Domain
140 SPI1-CLK P44-0 A19 3.3V Power Domain
141 SPI0-CLK P43-0 B18 3.3V Power Domain
142 GND Power -
143 GND Power -
144 I2C1-SCL Dedicated I2C line C23 RIIC1_SCL
Built-in pull-up resistor 2.2kOhm connected to 3.3V
145 P14-0 P14-0 AF27 3.3V Power Domain
146 I2C1-SDA Dedicated I2C line A24 RIIC1_SDA
Built-in pull-up resistor 2.2kOhm connected to 3.3V
147 P10-1 P10-1 AH22 3.3V Power Domain
148 I2C0-SCL Dedicated I2C line B24 RIIC0_SCL
Built-in pull-up resistor 2.2kOhm connected to 3.3V
149 P10-0 P10-0 AJ22 3.3V Power Domain
150 I2C0-SDA Dedicated I2C line A25 RIIC0_SDA
Built-in pull-up resistor 2.2kOhm connected to 3.3V
151 P15-0 P15-0 AH23 3.3V Power Domain
152 GND Power -
153 P14-1 P14-1 AJ23 3.3V Power Domain
154 ADC-CH7 Dedicated analog input 12-bit ADC, max. 1.8V on input
155 P16-0 P16-0 AH24 3.3V Power Domain
156 ADC-CH6 Dedicated analog input 12-bit ADC, max. 1.8V on input
157 P15-1 P15-1 AJ24 3.3V Power Domain
158 ADC-CH5 Dedicated analog input 12-bit ADC, max. 1.8V on input
159 P17-0 P17-0 AH25 3.3V Power Domain
160 ADC-CH4 Dedicated analog input 12-bit ADC, max. 1.8V on input
160 SSI-MCLK AUDIO-CLK E12 Reference clock output (for audio codec)
161 P16-1 P16-1 AJ25 3.3V Power Domain
162 ADC-CH3 Dedicated analog input 12-bit ADC, max. 1.8V on input
163 P17-2 P17-2 AH26 3.3V Power Domain
164 ADC-CH2 Dedicated analog input 12-bit ADC, max. 1.8V on input
165 P17-1 P17-1 AJ26 3.3V Power Domain
166 ADC-CH1 Dedicated analog input 12-bit ADC, max. 1.8V on input
167 P13-2 P13-2 AG26 3.3V Power Domain
168 ADC-CH0 Dedicated analog input 12-bit ADC, max. 1.8V on input
169 GND Power -
170 GND Power -
171 DSI-DATA3_P Analog I/O AH18 MIPI-DSI line
172 CSI-DATA3_N Analog I/O AH11 MIPI-CSI line
173 DSI-DATA3_N Analog I/O AJ18 MIPI-DSI line
174 CSI-DATA3_P Analog I/O AJ11 MIPI-CSI line
175 GND Power -
176 GND Power -
177 DSI-DATA2_P Analog I/O AH15 MIPI-DSI line
178 CSI-DATA2_N Analog I/O AH14 MIPI-CSI line
179 DSI-DATA2_N Analog I/O AJ15 MIPI-DSI line
180 CSI-DATA2_P Analog I/O AJ14 MIPI-CSI line
181 GND Power -
182 GND Power -
183 DSI-CLK_P Analog I/O AG17 MIPI-DSI line
184 CSI-CLK_N Analog I/O AG12 MIPI-CSI line
185 DSI-CLK_N Analog I/O AG18 MIPI-DSI line
186 CSI-CLK_P Analog I/O AG13 MIPI-CSI line
187 GND Power -
188 GND Power -
189 DSI-DATA1_P Analog I/O AH17 MIPI-DSI line
190 CSI-DATA1_N Analog I/O AH12 MIPI-CSI line
191 DSI-DATA1_N Analog I/O AJ17 MIPI-DSI line
192 CSI-DATA1_P Analog I/O AJ12 MIPI-CSI line
193 GND Power -
194 GND Power -
195 DSI-DATA0_P Analog I/O AH16 MIPI-DSI line
196 CSI-DATA0_N Analog I/O AH13 MIPI-CSI line
197 DSI-DATA0_N Analog I/O AJ16 MIPI-DSI line
198 CSI-DATA0_P Analog I/O AJ13 MIPI-CSI line
199 GND Power -
200 GND Power -
- WLAN-ENABLE P40-2 A17 1DX radio module line (WiFi)
Not available externally
- WLAN-H-WAKE P19-1 B2 1DX radio module line (WiFi)
Not available externally
- SD1-CLK - H3 1DX radio module line (WiFi)
Not available externally
- SD1-CMD - J2 1DX radio module line (WiFi)
Not available externally
- SD1-DATA0 - H1 1DX radio module line (WiFi)
Not available externally
- SD1-DATA1 - H2 1DX radio module line (WiFi)
Not available externally
- SD1-DATA2 - K2 1DX radio module line (WiFi)
Not available externally
- SD1-DATA3 - J1 1DX radio module line (WiFi)
Not available externally
- UART2-RXD P48-1 B23 1DX radio module line (BLE)
Not available externally
- UART2-TXD P48-0 B22 1DX radio module line (BLE)
Not available externally
- UART2-RTS P48-4 B23 1DX radio module line (BLE)
Not available externally
- UART2-CTS P48-3 C22 1DX radio module line (BLE)
Not available externally
- BT-DEV-WAKE P39-0 A16 1DX radio module line (BLE)
Not available externally
- BT-HOST-WAKE P39-1 C15 1DX radio module line (BLE)
Not available externally
- BT-REG-ON P39-3 B16 1DX radio module line (BLE)
Not available externally
- JTAG-TMS AD2 JTAG interface
1.8V Power Domain
- JTAG-TCK AE1 JTAG interface
1.8V Power Domain
- JTAG-TDO AE2 JTAG interface
1.8V Power Domain
- JTAG-TDI AF1 JTAG interface
1.8V Power Domain
- JTAG-TRST AF2 JTAG interface
1.8V Power Domain
- QSPI-CLK C4 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO0 A3 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO1 B3 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO2 A4 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO3 B4 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-SS A2 Optional on-board QSPI Flash (W25Q128FWPIG)

JTAG Connector

Connector pin number Default function GPIO BGA456 ball Notes
JTAG-CONN-1 VDD-1V8 - -
JTAG-CONN-2 TMS (SWDIO) - AD2 10kOhm pull-up
JTAG-CONN-3 TCK (SWDCLK) - AE1 10kOhm pull-up
JTAG-CONN-4 TDO - AE2 10kOhm pull-up
JTAG-CONN-5 TDI - AF1 10kOhm pull-up
JTAG-CONN-6 TRST - AF2 10kOhm pull-up
JTAG-CONN-7 DEBUG EN - AE18 10kOhm pull-down
JTAG-CONN-8 GND - - -

Dimensions

Retrieved from "https://wiki.somlabs.com/index.php?title=VisionSOM-V2L_Datasheet_and_Pinout&oldid=3768"