VisionCB-x2L-STD

VisionCB-x2L-STD

The VisionCB-x2L-STD (with SOM equipped with Renesas RZ/V2L and RZ/G2L MPUs compatible) is a carrier board for the VisionSOM-V2L and VisionSOM-G2L family of computer-on-modules which are powered by dual-core Renesas MPUs (2 x ARM Cortex-A55 + Cortex-M33). The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, CAN, RS485, audio codec, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. The VisionCB-x2L-STD is equipped with a simple user interface consisting of 4 buttons and 4 LEDs. VisionCB-x2L-STD carrier board is also equipped with a large number of popular peripherals, including: RS485, CAN, 10/100/1G Ethernet, MIPI display and camera connectors, serial console port on USB vCOM.

Documentation

• VisionCB-x2L-STD Datasheet and Pinout
• VisionCB-x2L-STD - STEP
• VisionCB-x2L-STD - Schematic

Specifications

SOM compatibility	VisionSOM-V2L and VisionSOM-G2L modules with dual core Renesas RZ/V2L and RZ/G2L processor (2 x Cortex-A55 + Cortex-M33)
SOM socket	SODIMM200
Display connector	up to 4 lanes MIPI-DSI interface (FPC30)
Network	1x Ethernet 10/100/1000Mbit/s, RJ45
USB	USB 2.0 host x1 USB-OTG 2.0 x1
Console interface	USB/UART
Switches	4/1 (user/system)
LEDs	4/2 (user/system)
Connectors	MIPI-CSI2 camera connector (FPC30) Raspberry Pi compatible (40 pins, 2.54mm) ADC+GPIO (18 pins, 2.54mm) Ethernet CH1 (20 pins, 2.54mm) CAN (3 pins, 2.54mm) RS-485 (3 pins, 2.54mm) Jack Stereo (3.5mm)
Power supply	External 9-12V DC
Temperature Range	0 to +70°C
Dimensions	160mm x 100mm x 18mm