SpaceSOM-8Mplus Datasheet and Pinout: Difference between revisions
From SomLabs Wiki
No edit summary Tag: Manual revert |
|||
| (7 intermediate revisions by 2 users not shown) | |||
| Line 59: | Line 59: | ||
== Ordering info == | == Ordering info == | ||
__orderingInfoStart__ | __orderingInfoStart__ | ||
[ | [ | ||
{ | { | ||
| Line 75: | Line 76: | ||
"I" | "I" | ||
] | ] | ||
} | } | ||
}, | |||
{ | |||
"field1":{ | "field1":{ | ||
"name":"Clock", | "name":"Clock", | ||
| Line 97: | Line 91: | ||
] | ] | ||
} | } | ||
} | |||
] | ] | ||
}, | }, | ||
{ | { | ||
| Line 204: | Line 195: | ||
"values" : [ | "values" : [ | ||
{"value" : "C", "description" : "Consumer: 0 to +70 C "}, | {"value" : "C", "description" : "Consumer: 0 to +70 C "}, | ||
{"value" : "E", "description" : "Extended: - | {"value" : "E", "description" : "Extended: -30 to +85 C"}, | ||
{"value" : "I", "description" : "Industrial: -40 to +85 C"} | {"value" : "I", "description" : "Industrial: -40 to +85 C"} | ||
] | ] | ||
} | } | ||
]__orderingInfoEnd__ | ] | ||
__orderingInfoEnd__ | |||
== Block Diagram == | == Block Diagram == | ||
| Line 269: | Line 261: | ||
| VGPIO @3V3 || GPIO Input Voltage || 0 || - || 3.6<sup>2</sup> || V | | VGPIO @3V3 || GPIO Input Voltage || 0 || - || 3.6<sup>2</sup> || V | ||
|- | |- | ||
| V<sub>USB_VBUS</sub> || USB VBUS Input Voltage || 0 || - || | | V<sub>USB_VBUS</sub> || USB VBUS Input Voltage || 0 || - || 5.0<sup>3</sup> || V | ||
|} | |} | ||
Notes:<br /> | Notes:<br /> | ||
1. Total current on both VDD-3V3 outputs.<br /> | 1. Total current on both VDD-3V3 outputs.<br /> | ||
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.45V.<br /> | 2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.45V.<br /> | ||
3. | 3. Allowed maximum voltage range of USBx_VBUS input is 0...+3.95V but input current is limited by 30k resistor connected in series.<br /> | ||
== SoM pinout == | == SoM pinout == | ||
| Line 920: | Line 912: | ||
| <br />105 | | <br />105 | ||
| <br />USB2-VBUS | | <br />USB2-VBUS | ||
| <br /> | | <br />- | ||
| <br />D12 | | <br />D12 | ||
| <br /> | | <br />Dedicated USB2.0 interface line with 30 k resistor in series | ||
|- | |- | ||
| <br />106 | | <br />106 | ||
| Line 1,054: | Line 1,046: | ||
| <br />- | | <br />- | ||
| <br />A11 | | <br />A11 | ||
| <br />Dedicated | | <br />Dedicated USB2.0 interface line with 30 k resistor in series | ||
|- | |- | ||
| <br />128 | | <br />128 | ||
Latest revision as of 18:14, 15 November 2024
SpaceSOM-8Mplus Datasheet and Pinout
General description
The SpaceSOM-8Mplus family is a SODIMM-sized SoM based on the NXP quad core i.MX8M plus application processor which features an advanced implementation of NPU (ML+AI) coprocessor, a dual or four ARM Cortex-A53 cores (at speed up to 1.8GHz) and ARM Cortex-M7 core (at speed up to 800MHz) as well as a 2D (HD1080p60) and 3D Graphics Processing Unit (GPU) Open GL 3.01ES compatible and Video Processing Unit (VPU) with D1080p60 H.264 and HD1080p60 H.265 capabilities.
The SpaceSOM-8Mplus is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power and dual-band 2.4/5GHz, 802.11a/b/g/n/ac Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The SpaceSOM-8Mplus provides a variety memory configuration including flexible range of LPDDR4, eMMC or SD memory card that meets our customers requirements.
The SoM supports connections to a variety of interfaces: two high-speed USB 2.0/3.0 on-the-go with PHY, dual Ethernet 1Gbit, audio, display with touch panel and MIPI-DSI/HDMI/LVDS interface and serial communication interfaces. In addition, the system supports industrial grade embedded applications.
SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
Applications
- Machine vision equipment
- Robotics
- Human-machine Interfaces (HMI)
- IP Cameras
- Video Stream Servers
- Home Appliances
- Home Automation – Smart Home
- IoT gateways
- Residential gateways
- Industrial embedded Linux computer
- Fitness/outdoor equipment
Features
- Powered by quad core NXP i.MX8M plus application processor
- Quad ARM Cortex-A53 core at speed up to 1.8GHz
- ARM Cortex-M7 core at speed up to 800MHz
- Integrated Machine-Learning (ML) and Artificial Intelligence (AI) Neural Processing Unit (NPU)
- Up to 4GB DRAM LPDDR4
- Up to 32GB eMMC memory or uSD memory card
- Optional Murata dual-band 2.4/5GHz, 802.11a/b/g/n/ac Wi-Fi and Bluetooth v5.1
- Built-in PCIe 3.0 communication interface
- Built-in dual USB 2.0/3.0 interface
- Built-in HDMI/LVDS and MIPI-DSI display interface
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- Integrated security features
Pictures of SOM versions
| Version | Photo |
|---|---|
| eMMC |
  |
| WiFi/BT module is available for all memory configurations. |
Ordering info
SLSNNCpuType_Clock_RamSize_FlashSize_SF_TEMP
| SLS | Product type SLS - System on Module |
| N | SOM Name 3 - High Performance SpaceSOM SODIMM260 module |
| N | CPU Family 5 - i.MX 8M plus |
| CpuType | CPU Type X8MPQC - i.MX 8M plus Quad Core |
| Clock | CPU Clock Speed 1600C - 1.6GHz (Industrial temperature range) 1800C - 1.8GHz (Commercial temperature range) |
| RamSize | LPDDR4 RAM Size 01GR - 1GB (1024MB) 02GR - 2GB (2048MB) 04GR - 4GB (4096MB) |
| FlashSize | eMMC Memory Size 04GE - 4GB eMMC 08GE - 8GB eMMC 16GE - 16GB eMMC 32GE - 32GB eMMC |
| SF | Special Features 0SF - No Special Features 1WB - Built-in dual-band Wi-Fi and Bluetooth v5.1 |
| TEMP | Operating Temperature C - Consumer: 0 to +70 C E - Extended: -30 to +85 C I - Industrial: -40 to +85 C |
Block Diagram
Operating ranges
| Parameter | Value | Unit | Comment |
|---|---|---|---|
| Power Supply | Connected to VDD 5V SODIM260 pins | ||
| Max. input GPIO voltage | - | ||
| Environment temperature1 | oC | Industrial range w/o WiFi module | |
| Industrial range with WiFi module | |||
| Consumer range |
Note:
1. Maximum MPU junction temperature is +105oC.
2. Junction temperature determines MPU lifetime. Details: NXP AN13214 Application Note.
Electrical parameters
| SOM signal name |
Parameter | Value | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| VDD-5V | Supply Voltage (Input) | 4.0 | 5.0 | 5.25 | V |
| SD1-NVCC | Output power supply for external 1.8/3.3V accesories | - | - | 0.08 | A |
| VDD-1V8 | Output power supply for external 1.8V accesories | - | - | 0.4 | A |
| VDD-3V3 | Output power supply for external 3.3V accesories | - | - | 0.31 | A |
| VGPIO @1V8 | GPIO Input Voltage | 0 | - | 2.05 | V |
| VGPIO @3V3 | GPIO Input Voltage | 0 | - | 3.62 | V |
| VUSB_VBUS | USB VBUS Input Voltage | 0 | - | 5.03 | V |
Notes:
1. Total current on both VDD-3V3 outputs.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.45V.
3. Allowed maximum voltage range of USBx_VBUS input is 0...+3.95V but input current is limited by 30k resistor connected in series.
SoM pinout
Important notes:
1. Detail pin configurations description you can find, edit and arrange in dedicated MEX file (with free "iMX PinTool" configurational tool).
2. JTAG-MOD (ball G2) is permanently connected to GND
3. BOOT-MODE0 – RECOVERY line 0 -> BOOT-MODE0=1
4. BOOT-MODE1...MODE3 are premanently connected to GND
5. SDIO2 interface is used to communication with Murata 1ZM radio module
6. eMMC memory is connected to SDIO3 interface
SOM pin number |
Default function |
GPIO |
FCBGA548 ball |
Notes |
|---|---|---|---|---|
1 |
GND |
- |
- |
|
2 |
GND |
- |
- |
|
3 |
JTAG-TMS |
- |
G14 |
3.3V power domain |
4 |
UART4-TXD |
GPIO5.29 |
AH5 |
3.3V power domain |
5 |
JTAG-TCK |
- |
G18 |
3.3V power domain |
6 |
UART4-RXD |
GPIO5.28 |
AJ5 |
3.3V power domain |
7 |
JTAG-TDO |
- |
F14 |
3.3V power domain |
8 |
CAN1-TX |
GPIO5.03 |
AE18 |
3.3V power domain |
9 |
JTAG-TDI |
- |
G16 |
3.3V power domain |
10 |
CAN1-RX |
GPIO5.04 |
AD18 |
3.3V power domain |
11 |
VDD-3V3 |
- |
- |
3.3V power supply output for external accesories, load max. 300mA |
12 |
CAN2-TX |
GPIO4.26 |
AH16 |
3.3V power domain |
13 |
I2C2-SDA |
GPIO5.17 |
AE8 |
3.3V power domain |
14 |
CAN2-RX |
GPIO4.27 |
AJ15 |
3.3V power domain |
15 |
I2C2-SCL |
GPIO5.16 |
AH6 |
3.3V power domain |
16 |
GPIO5.05 |
- |
AC18 |
3.3V power domain |
17 |
GND |
- |
- |
|
18 |
GPIO5.23 |
- |
AJ3 |
3.3V power domain |
19 |
SAI3-MCLK |
GPIO5.02 |
AJ20 |
3.3V power domain |
20 |
GPIO5.22 |
- |
AD6 |
3.3V power domain |
21 |
GND |
- |
- |
|
22 |
NC |
- |
- |
|
23 |
SAI3-TXD |
GPIO5.01 |
AH18 |
3.3V power domain |
24 |
NC |
- |
- |
|
25 |
SAI3-TXC |
GPIO5.00 |
AH19 |
3.3V power domain |
26 |
UART3-RXD |
GPIO5.26 |
AE6 |
3.3V power domain |
27 |
SAI3-TXFS |
GPIO4.31 |
AC16 |
3.3V power domain |
28 |
UART3-TXD |
GPIO5.27 |
AJ4 |
3.3V power domain |
29 |
SAI3-RXD |
GPIO4.30 |
AF18 |
3.3V power domain |
30 |
UART2-RXD |
GPIO5.24 |
AF6 |
3.3V power domain |
31 |
SAI3-RXC |
GPIO4.29 |
AJ18 |
3.3V power domain |
32 |
UART2-TXD |
GPIO5.25 |
AH4 |
3V3 power domain |
33 |
SAI3-RXFS |
GPIO4.28 |
AJ19 |
3.3V power domain |
34 |
I2C3-SCL |
GPIO5.18 |
AJ7 |
3.3V power domain |
35 |
GND |
- |
- |
|
36 |
I2C3-SDA |
GPIO5.19 |
AJ6 |
3.3V power domain |
37 |
DDC-SDA |
GPIO3.27 |
AF22 |
|
38 |
GND |
- |
- |
|
39 |
DDC-SCL |
GPIO3.26 |
AC22 |
I2C5-SCL |
40 |
SPI2-CS0 |
GPIO5.13 |
AJ22 |
3.3V power domain |
41 |
HDMI-HPD |
GPIO3.29 |
AE22 |
|
42 |
SPI2-SCLK |
GPIO5.10 |
AH21 |
3.3V power domain |
43 |
HDMI-EARC-AUX |
- |
AH23 |
Dedicated HDMI interface line |
44 |
SPI2-MISO |
GPIO5.12 |
AH20 |
3.3V power domain |
45 |
HDMI-EARC_N |
- |
AH22 |
Dedicated HDMI interface line |
46 |
SPI2-MOSI |
GPIO5.11 |
AJ21 |
3.3V power domain |
47 |
HDMI-EARC_P |
- |
AJ23 |
Dedicated HDMI interface line |
48 |
SPI1-CS0 |
GPIO5.09 |
AE20 |
3.3V power domain |
49 |
HDMI-CEC |
GPIO3.28 |
AD22 |
|
50 |
SPI1-SCLK |
GPIO5.06 |
AF20 |
3.3V power domain |
51 |
GND |
- |
- |
|
52 |
SPI1-MISO |
GPIO5.08 |
AD20 |
3.3V power domain |
53 |
HDMI-CK_N |
- |
AJ24 |
Dedicated HDMI interface line |
54 |
SPI1-MOSI |
GPIO5.07 |
AC20 |
3.3V power domain |
55 |
HDMI-CK_P |
- |
AH24 |
Dedicated HDMI interface line |
56 |
GND |
- |
- |
|
57 |
GND |
- |
- |
|
58 |
LVDS0-DATA3_P |
- |
C29 |
Dedicated LVDS interface line |
59 |
HDMI-D0_N |
- |
AJ25 |
Dedicated HDMI interface line |
60 |
LVDS0-DATA3_N |
- |
D28 |
Dedicated LVDS interface line |
61 |
HDMI-D0_P |
- |
AH25 |
Dedicated HDMI interface line |
62 |
GND |
- |
- |
|
63 |
HDMI-D1_N |
- |
AJ26 |
Dedicated HDMI interface line |
64 |
LVDS0-CLK_P |
- |
A28 |
Dedicated LVDS interface line |
65 |
HDMI-D1_P |
- |
AH26 |
Dedicated HDMI interface line |
66 |
LVDS0-CLK_N |
- |
B28 |
Dedicated LVDS interface line |
67 |
HDMI-D2_N |
- |
AJ27 |
Dedicated HDMI interface line |
68 |
GND |
- |
- |
|
69 |
HDMI-D2_P |
- |
AH27 |
Dedicated HDMI interface line |
70 |
LVDS0-DATA2_P |
- |
B29 |
Dedicated LVDS interface line |
71 |
GND |
- |
- |
|
72 |
LVDS0-DATA2_N |
- |
C28 |
Dedicated LVDS interface line |
73 |
SD1-DQS |
GPIO2.11 |
W26 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
74 |
LVDS0-DATA1_P |
- |
A27 |
Dedicated LVDS interface line |
75 |
SD1-CD |
GPIO2.10 |
W25 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
76 |
LVDS0-DATA1_N |
- |
B27 |
Dedicated LVDS interface line |
77 |
SD1-DATA7 |
GPIO2.09 |
U25 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
78 |
LVDS0-DATA0_P |
- |
A26 |
Dedicated LVDS interface line |
79 |
SD1-DATA6 |
GPIO2.08 |
AA28 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
80 |
LVDS0-DATA0_N |
- |
B26 |
Dedicated LVDS interface line |
81 |
SD1-DATA5 |
GPIO2.07 |
AA29 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
82 |
GND |
- |
- |
|
83 |
SD1-DATA4 |
GPIO2.06 |
U26 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
84 |
LVDS1-DATA3_P |
- |
C29 |
Dedicated LVDS interface line |
85 |
SD1-DATA1 |
GPIO2.03 |
Y28 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
86 |
LVDS1-DATA3_N |
- |
D28 |
Dedicated LVDS interface line |
87 |
SD1-DATA0 |
GPIO2.02 |
Y29 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
88 |
GND |
- |
- |
|
89 |
GND |
- |
- |
|
90 |
LVDS1-CLK_P |
- |
A28 |
Dedicated LVDS interface line |
91 |
SD1-CLK |
GPIO2.00 |
W28 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
92 |
LVDS1-CLK_N |
- |
B28 |
Dedicated LVDS interface line |
93 |
SD1-CMD |
GPIO2.01 |
W29 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
94 |
GND |
- |
- |
|
95 |
SD1-DATA3 |
GPIO2.05 |
V28 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
96 |
LVDS1-DATA2_P |
- |
B29 |
Dedicated LVDS interface line |
97 |
SD1-DATA2 |
GPIO2.04 |
V29 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
98 |
LVDS1-DATA2_N |
- |
C28 |
Dedicated LVDS interface line |
99 |
SD1-NVCC |
- |
- |
SD1 1.8/3.3V power supply output (controlled by SDIO-VSELECT), load max. 80 mA |
100 |
LVDS1-DATA1_P |
- |
A27 |
Dedicated LVDS interface line |
101 |
VDD-3V3 |
- |
- |
3.3V power supply output for external accesories, load max. 300mA |
102 |
LVDS1-DATA1_N |
- |
B27 |
Dedicated LVDS interface line |
103 |
USB2-VBUS-OC |
GPIO1.15 |
B5 |
3.3V power domain |
104 |
LVDS1-DATA0_P |
- |
A26 |
Dedicated LVDS interface line |
105 |
USB2-VBUS |
- |
D12 |
Dedicated USB2.0 interface line with 30 k resistor in series |
106 |
LVDS1-DATA0_N |
- |
C26 |
Dedicated LVDS interface line |
107 |
USB2-VBUS-EN |
GPIO1.14 |
A4 |
3.3V power domain |
108 |
GND |
- |
- |
|
109 |
USB2-D_P |
- |
D14 |
Dedicated USB2.0 interface line |
110 |
PCIe-CLK_P |
- |
D16 |
CLKp line of PCIe interface (serial 100nF is necessary) |
111 |
USB2-D_N |
- |
E14 |
Dedicated USB2.0 interface line |
112 |
PCIe-CLK_N |
- |
E16 |
CLKn line of PCIe interface (serial 100nF is necessary) |
113 |
USB2-ID |
E12 |
Dedicated USB2.0 interface line | |
114 |
GND |
- |
- |
|
115 |
USB2-SS-RX_P |
- |
A12 |
Dedicated USB3.0 interface line |
116 |
PCIe-TXN_P |
- |
A15 |
TXp line of PCIe interface (serial 100nF is necessary) |
117 |
USB2-SS-RX_N |
- |
B12 |
Dedicated USB3.0 interface line |
118 |
PCIe-TXN_N |
- |
B15 |
TXn line of PCIe interface (serial 100nF is necessary) |
119 |
USB2-SS-TX_N |
- |
B13 |
Dedicated USB3.0 interface line |
120 |
GND |
- |
- |
|
121 |
USB2-SS-TX_P |
- |
A13 |
Dedicated USB3.0 interface line |
122 |
PCIe-RXN_P |
- |
A14 |
TXn line of PCIe interface |
123 |
GND |
- |
- |
|
124 |
PCIe-RXN_N |
- |
B14 |
TXn line of PCIe interface |
125 |
USB1-VBUS-OC |
GPIO1.13 |
A6 |
3.3V power domain |
126 |
GND |
- |
- |
|
127 |
USB1-VBUS |
- |
A11 |
Dedicated USB2.0 interface line with 30 k resistor in series |
128 |
GPIO1.08 |
GPIO1.08 |
A8 |
3.3V power domain |
129 |
USB1-VBUS-EN |
GPIO1.12 |
A5 |
3.3V power domain |
130 |
GPIO1.09 |
GPIO1.09 |
B8 |
3.3V power domain |
131 |
USB1-D_P |
- |
D10 |
Dedicated USB2.0 interface line |
132 |
GPIO1.00 |
- |
A7 |
3.3V power domain |
133 |
USB1-D_N |
- |
E10 |
Dedicated USB2.0 interface line |
134 |
GPIO1.10 |
- |
B7 |
3.3V power domain |
135 |
USB1-ID |
- |
B11 |
Dedicated USB2.0 interface line |
136 |
GPIO1.01 |
- |
E8 |
3.3V power domain |
137 |
USB1-SS-RX_P |
- |
A9 |
Dedicated USB3.0 interface line |
138 |
GPIO1.11 |
- |
D8 |
3.3V power domain |
139 |
USB1-SS-RX_N |
- |
B9 |
Dedicated USB3.0 interface line |
140 |
GPIO1.07 |
- |
F6 |
3.3V power domain |
141 |
USB1-SS-TX_N |
- |
C10 |
Dedicated USB3.0 interface line |
142 |
GPIO1.03 |
- |
D6 |
3.3V power domain |
143 |
USB1-SS-TX_P |
- |
A10 |
Dedicated USB3.0 interface line |
144 |
GPIO1.04 |
- |
E6 |
3.3V power domain |
145 |
GND |
- |
- |
|
146 |
GPIO1.05 |
- |
B4 |
3.3V power domain |
147 |
ENET2-INT |
GPIO4.19 |
AJ13 |
1.8V power domain |
148 |
GPIO1.06 |
- |
A3 |
3.3V power domain |
149 |
ENET2-RXC |
GPIO4.11 |
AJ12 |
1.8V power domain |
150 |
SYS-LED |
GPIO4.25 |
AH15 |
3.3V power domain |
151 |
ENET2-RX-CTL |
GPIO4.10 |
AF12 |
1.8V power domain |
152 |
RECOVERY |
- |
G10 |
Recovery input (BOOT-MODE0): =0 during reset – start eMMC recovering =1 or NC – normal operation |
153 |
ENET2-RXD0 |
GPIO4.06 |
AD10 |
1.8V power domain |
154 |
I2C4-SCL |
GPIO5.20 |
AF8 |
3.3V power domain |
155 |
ENET2-RXD1 |
GPIO4.07 |
AE10 |
1.8V power domain |
156 |
I2C4-SDA |
GPIO5.21 |
AD8 |
3.3V power domain |
157 |
ENET2-RXD2 |
GPIO4.04 |
AH9 |
1.8V power domain |
158 |
I2C1-SCL |
GPIO5.14 |
AC8 |
3.3V power domain |
159 |
ENET2-RXD3 |
GPIO4.05 |
AJ8 |
1.8V power domain |
160 |
I2C1-SDA |
GPIO5.15 |
AH7 |
3.3V power domain |
161 |
GND |
- |
- |
|
162 |
GND |
- |
- |
|
163 |
ENET2-TXC |
GPIO4.17 |
AH14 |
1.8V power domain |
164 |
CSI2-DATA3_P |
- |
A21 |
MIPI-CSI video input channel |
165 |
ENET2-TX-CTL |
GPIO4.16 |
AH13 |
1.8V power domain |
166 |
CSI2-DATA3_N |
- |
B21 |
MIPI-CSI video input channel |
167 |
ENET2-TXD0 |
GPIO4.12 |
AJ11 |
1.8V power domain |
168 |
CSI2-DATA2_P |
- |
A22 |
MIPI-CSI video input channel |
169 |
ENET2-TXD1 |
GPIO4.13 |
AJ10 |
1.8V power domain |
170 |
CSI2-DATA2_N |
- |
B22 |
MIPI-CSI video input channel |
171 |
ENET2-TXD2 |
GPIO4.14 |
AH11 |
1.8V power domain |
172 |
CSI2-DATA1_P |
- |
A24 |
MIPI-CSI video input channel |
173 |
ENET2-TXD3 |
GPIO4.15 |
AD12 |
1.8V power domain |
174 |
CSI2-DATA1_N |
- |
B24 |
MIPI-CSI video input channel |
175 |
ENET2-MDIO |
GPIO4.05 |
AJ8 |
1.8V power domain |
176 |
CSI2-DATA0_P |
- |
A25 |
MIPI-CSI video input channel |
177 |
ENET2-MDC |
GPIO4.04 |
AH9 |
1.8V power domain |
178 |
CSI2-DATA0_N |
- |
B25 |
MIPI-CSI video input channel |
179 |
ENET2-RST |
GPIO4.18 |
AC12 |
1.8V power domain |
180 |
GND |
- |
- |
|
181 |
ENET2-EV1-OUT |
GPIO4.03 |
AF10 |
1.8V power domain |
182 |
CSI2-CLK_P |
- |
A23 |
MIPI-CSI video input channel |
183 |
ENET2-EV1-IN |
GPIO4.02 |
AC10 |
1.8V power domain |
184 |
CSI2-CLK_N |
- |
B23 |
MIPI-CSI video input channel |
185 |
ENET2-EV0-OUT |
GPIO4.01 |
AH8 |
1.8V power domain |
186 |
GND |
- |
- |
|
187 |
ENET2-EV0-IN |
GPIO4.00 |
AJ9 |
1.8V power domain |
188 |
CSI1-DATA3_N |
- |
E26 |
MIPI-CSI video input channel |
189 |
VDD-1V8 |
- |
- |
1.8V voltage output for external accesories, load max. 400 mA |
190 |
CSI1-DATA3_P |
- |
D26 |
MIPI-CSI video input channel |
191 |
GND |
- |
- |
|
192 |
CSI1-DATA2_N |
- |
E24 |
MIPI-CSI video input channel |
193 |
ENET1-INT |
GPIO4.20 |
AE12 |
1.8V power domain |
194 |
CSI1-DATA2_P |
- |
D24 |
MIPI-CSI video input channel |
195 |
ENET1-RXC |
GPIO1.25 |
AE29 |
1.8V power domain |
196 |
CSI1-DATA1_N |
- |
E20 |
MIPI-CSI video input channel |
197 |
ENET1-RX-CTL |
GPIO1.24 |
AE28 |
1.8V power domain |
198 |
CSI1-DATA1_P |
- |
D20 |
MIPI-CSI video input channel |
199 |
ENET1-RXD0 |
GPIO1.26 |
AG29 |
1.8V power domain |
200 |
CSI1-DATA0_N |
- |
E18 |
MIPI-CSI video input channel |
201 |
ENET1-RXD1 |
GPIO1.27 |
AG28 |
1.8V power domain |
202 |
CSI1-DATA0_P |
- |
D18 |
MIPI-CSI video input channel |
203 |
ENET1-RXD2 |
GPIO1.28 |
AF29 |
1.8V power domain |
204 |
GND |
- |
- |
|
205 |
ENET1-RXD3 |
GPIO1.29 |
AF28 |
1.8V power domain |
206 |
CSI1-CLK_N |
- |
E22 |
MIPI-CSI video input channel |
207 |
GND |
- |
- |
|
208 |
CSI1-CLK_P |
- |
D22 |
MIPI-CSI video input channel |
209 |
ENET1-TXC |
GPIO1.23 |
AE24 |
1.8V power domain |
210 |
GND |
- |
- |
|
211 |
ENET1-TX-CTL |
GPIO1.22 |
AF24 |
1.8V power domain |
212 |
DSI-CLK_P |
- |
A18 |
DSI1 video output channel |
213 |
ENET1-TXD0 |
GPIO1.25 |
AC25 |
1.8V power domain |
214 |
DSI-CLK_N |
- |
B18 |
DSI1 video output channel |
215 |
ENET1-TXD1 |
GPIO1.20 |
AE26 |
1.8V power domain |
216 |
GND |
- |
- |
|
217 |
ENET1-TXD2 |
GPIO1.19 |
AF26 |
1.8V power domain |
218 |
DSI-DATA0_P |
- |
A16 |
DSI1 video output channel |
219 |
ENET1-TXD3 |
GPIO1.18 |
AD24 |
1.8V power domain |
220 |
DSI-DATA0_N |
- |
B16 |
DSI1 video output channel |
221 |
ENET1-MDIO |
GPIO1.17 |
AH29 |
1.8V power domain |
222 |
DSI-DATA1_P |
- |
A17 |
DSI1 video output channel |
223 |
ENET1-MDC |
GPIO1.16 |
AH28 |
1.8V power domain |
224 |
DSI-DATA1_N |
- |
B17 |
DSI1 video output channel |
225 |
ENET1-RST |
T28 |
1.8V power domain | |
226 |
DSI-DATA2_P |
- |
A19 |
DSI1 video output channel |
227 |
GPIO3.24 |
- |
AE14 |
1.8V power domain |
228 |
DSI-DATA2_N |
- |
B19 |
DSI1 video output channel |
229 |
GPIO3.23 |
- |
AF16 |
1.8V power domain |
230 |
DSI-DATA3_P |
- |
A20 |
DSI1 video output channel |
231 |
GPIO3.22 |
- |
AD16 |
1.8V power domain |
232 |
DSI-DATA3_N |
- |
B20 |
DSI1 video output channel |
233 |
NC |
- |
- |
|
234 |
GND |
- |
- |
|
235 |
NC |
- |
- |
|
236 |
NC |
- |
- |
|
237 |
NC |
- |
- |
|
238 |
NC |
- |
- |
|
239 |
GND |
- |
- |
|
240 |
PWR-ON |
- |
G22 |
ONOFF MPU input 1.8V power domain |
241 |
I2C6-SCL |
GPIO3.19 |
AC14 |
I2C6 is used to communication with PMIC PCA9450CHN with internal 1V8 pull-ups. Externally compatible with 3.3V logic standards. |
242 |
SYS-RST |
- |
J29 |
Buffered, open-drain POR-B output |
243 |
I2C6-SDA |
GPIO3.20 |
AD14 |
I2C6 is used to communication with PMIC PCA9450CHN with internal 1V8 pull-ups. Externally compatible with 3.3V logic standards. |
244 |
RST-IN |
- |
- |
PMIC_RST_B input (system reset generated by PMIC) |
245 |
VDD5V |
- |
- |
External 5V input |
246 |
GND |
- |
- |
|
247 |
VDD5V |
- |
- |
External 5V input |
248 |
GND |
- |
- |
|
249 |
VDD5V |
- |
- |
External 5V input |
250 |
GND |
- |
- |
|
251 |
VDD5V |
- |
- |
External 5V input |
252 |
GND |
- |
- |
|
253 |
VDD5V |
- |
- |
External 5V input |
254 |
GND |
- |
- |
|
255 |
VDD5V |
- |
- |
External 5V input |
256 |
GND |
- |
- |
|
257 |
VDD5V |
- |
- |
External 5V input |
258 |
GND |
- |
- |
|
259 |
VDD5V |
- |
- |
External 5V input |
260 |
GND |
- |
- |
|
- |
PMIC-INT |
GPIO3.25 |
AF14 |
Interrupt line connected to IRQ_B PMIC PCA9450CHN |
- |
SDIO-VSELECT |
GPIO3.21 |
AE16 |
Control line for SDIO1 power supply voltage (LDO5 in PMIC PCA9450CHN, SDIO-VSELECT) |
- |
GPIO1.02 |
- |
B6 |
WDOG-B |
- |
BT-CTS |
- |
AJ14 |
1ZM Bluetooth module line (UART1) |
- |
BT-TXD |
- |
AH17 |
1ZM Bluetooth module line (UART1) |
- |
BT-RTS |
- |
AJ17 |
1ZM Bluetooth module line (UART1) |
- |
BT-RXD |
- |
AJ16 |
1ZM Bluetooth module line (UART1) |
- |
BT-H-WAKE |
GPIO2.20 |
AC26 |
1ZM Bluetooth module line |
- |
NAND_D0 |
QSPI-D0 |
R25 |
Connection for optional QSPI NOR Flash |
- |
NAND_D1 |
QSPI-D1 |
L25 |
Connection for optional QSPI NOR Flash |
- |
NAND_D2 |
QSPI-D2 |
L24 |
Connection for optional QSPI NOR Flash |
- |
NAND_D3 |
QSPI-D3 |
N24 |
Connection for optional QSPI NOR Flash |
- |
NAND_ALE |
QSPI-CLK |
N25 |
Connection for optional QSPI NOR Flash |
- |
NAND_CE0_B |
QSPI-CS |
L26 |
Connection for optional QSPI NOR Flash |
- |
WLAN-H-WAKE |
GPIO2.19 |
AD28 |
1ZM WiFi module line |
- |
WLAN-ENABLE |
GPIO2.12 |
AD29 |
1ZM WiFi module line |
Dimensions
