Personal tools

SL-TFT7-TP-800-480 Datasheet and Pinout: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
← Older edit
 
(48 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{PageHeader|VisionSOM-6ULL Datasheet and Pinout}} __toc__
{{PageHeader|Display module SL-TFT7-TP-800-480 Datasheet and Pinout}} __toc__
__jzpdf__
__jzpdf__
== General description ==
== General description ==
[[File:SL-TFT7-TP-800-480-front-rocks.png|800px|center]]
[[File:SL-TFT7-TP-800-480-front-rocks.png|800px|center]]
<br>
<br>  
SL-TFT7-TP-800-480 is complete display TFT-LCD (800x480 px) module integrated with capactive touch-panel. Module is powered from +5V @400mA, data interface is 24 b parallel RGB + I2C (touch-panel controller). SL-TFT7-TP-800-480 module is equpiied with FPC50 connector, 1:1 compatible with SoMLabs carrier, eval and base boards.
SL-TFT7-TP-800-480 is complete display TFT-LCD (800x480 pixels) module integrated with capactive touch-panel. Module is powered from +5V @400mA, data interface is 24-bit parallel RGB + I2C (for touch-panel controller). SL-TFT7-TP-800-480 module is equpiied with FPC50 connector, 1:1 compatible with VisionCB-STD v.1.0 and VisionCB-STD v.1.4.
SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch-panel.


== Features ==
== Features ==
* Powered by Powertip PH800480T013-IBC06 LCD-TFT
* Powered by Powertip PH800480T013-IBC15 LCD-TFT
* Display size 7 inches
* Display size 7 inches
* Display LCD matrix 800x480 px
* Display LCD matrix 800x480 px
Line 15: Line 15:
* Single supply +5V (DC/DC converters built-in)
* Single supply +5V (DC/DC converters built-in)
* Backlight LEDs built-in
* Backlight LEDs built-in
* Fully compatible with SoMLabs carrier, eval and base boards
* Compatible with SoMLabs carrier boards:
** VisionCB-STD v.1.0
** VisionCB-STD v.1.4


== Pictures of SL-TFT7-TP-800-480 module ==
== Multimedia ==
[[File:SL-TFT7-TP-800-480-back-shop.jpg]]<br>
 
{{#ev:youtube|NMKK1aid5M0|560x315|center}}
<br>
{{#ev:youtube|BeojPOAzAdU|560x315|center}}
<br>
{{#ev:youtube|oQTZ0I14acY|560x315|center}}
 
== Pictures ==
[[File:SL-TFT7-TP-800-480-front-empty-shop.jpg]]<br>
[[File:SL-TFT7-TP-800-480-front-empty-shop.jpg]]<br>
[[File:SL-TFT7-TP-800-480-front-rocks-shop.jpg]]<br>
[[File:SL-TFT7-TP-800-480-front-rocks-shop.jpg]]<br>
Line 25: Line 34:


== Ordering info ==
== Ordering info ==
'''SL-TFT7-TP-800-480'''
'''SL-TFT7-TP-800-480''' - FPC 50-pin 15-cm flat cable (A-A) is included.
 
== Block Diagram ==
[[File:SL-TFT7-TP-800-480-blokowy.png|center]]


== Operating ranges ==
== Operating ranges ==
Line 55: Line 61:
| <center>max. 3.3</center>
| <center>max. 3.3</center>
| <center>V</center>
| <center>V</center>
| I2C interface, 2,2k pull-up resistor on SDA and SCL lines
| I2C interface, 2.2kΩ pull-up resistor on SDA and SCL lines
|-  
|-  
|Environment temperature
|Environment temperature
Line 96: Line 102:
|-
|-
| V<sub>TPIO</sub>
| V<sub>TPIO</sub>
| TP controller IO Voltage
| TP Controller IO Voltage
| 0
| 0
| 3.3
| 3.3
Line 102: Line 108:
| V
| V
|-
|-
| f<sub>I2C</sub>
| V<sub>PWREN</sub>
| TP controller I2C speed
| Power Enable Input Voltage
| 0
| -
| 5.5
| V
|-
| f<sub>TPI2C</sub>
| TP Controller I2C Speed
| -
| -
| -
| -
Line 110: Line 123:
|-
|-
| f<sub>PWM</sub>
| f<sub>PWM</sub>
| PWM dimming frequency
| PWM Dimming Frequency
| -
| -
| -
| -
Line 117: Line 130:
|-
|-
| R<sub>INT</sub>
| R<sub>INT</sub>
| Interrupt output pull-up resistance
| Interrupt Output Pull-up Resistance
| -
| -
| 10
| 10
| -
| -
| k
| kΩ
|-
| R<sub>PWREN</sub>
| Power Enable Pull-up Resistance
| -
| 10
| -
| kΩ
|-
| R<sub>TPI2C</sub>
| Touch Panel Controller I2C IOs Pull-up Resistance
| -
| 2.2
| -
| kΩ
|}
|}
Notes:<br />
1. Excluding external load connected to +3.3VOUT lines.<br />


== SOM pinout ==
== Pinout ==
[[File:Sl-tft7-tp-800-480-pin1.jpg]]
<br />
<br>
{| class="wikitable"
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | SODIMM PIN
! style="text-align: center; font-weight: bold;" | FPC50 connector pin
! style="text-align: center; font-weight: bold;" | Functional
domain
! style="text-align: center; font-weight: bold;" | Function name
! style="text-align: center; font-weight: bold;" | Function name
! style="text-align: center; font-weight: bold;" | i.MX6 UltraLite/
! style="text-align: center; font-weight: bold;" | Description
ULL Pad Name
! style="text-align: center; font-weight: bold;" | Alternate functions
! Description (refer to i.MX6 UltraLite/ULL manuals for details)
|-
|-
| 1
| 1
| Power
| B0
| GND
| Blue 0 input
| -
| -
| -
|-
|-
| 2
| 2
| Power
| B1
| GND
| Blue 1 input
| -
| -
| -
|-
|-
| 3
| 3
| Ctrl
| B2
| PMIC-STBY-REQ
| Blue 2 input
| CCM_PMIC_STBY_REQ
| -
| Output, leave open if not used.
|-
|-
| 4
| 4
| Ctrl
| B3
| MX6-POR-B
| Blue 3 input
| -
| -
| External warm reset input, active L.
|-
|-
| 5
| 5
| Ctrl
| B4
| PMIC-ON-REQ
| Blue 4 input
| SNVS_PMIC_ON_REQ
| -
| Output, leave open if not used.
|-
|-
| 6
| 6
| Power
| B5
| VDD-SNVS-3V3
| Blue 5 input
| VDD_SNVS_IN
| -
| SNVS backup power supply must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. Internally connected to +3.3V, leave open.
|-
|-
| 7
| 7
| BOOT
| B6
| BOOT-MODE1
| Blue 6 input
| BOOT_MODE1
| GPIO5_IO11
| BOOT-MODE1 BOOT-MODE0
 
00 boot from fuses (default)
 
01 serial downloader
 
10 internal boot
 
11 reserved
 
|-
|-
| 8
| 8
| Power
| B7
| VDD-COIN-3V
| Blue 7 input
| VDD_SNVS_IN
| -
| Optional external coin battery for SNVS power domain, must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state.
Leave open if not used.
|-
|-
| 9
| 9
| BOOT
| GND
| BOOT-MODE0
| Power supply
| BOOT_MODE0
| GPIO5_IO10
| BOOT-MODE1 BOOT-MODE0
 
00 boot from fuses (default)
 
01 serial downloader
 
10 internal boot
 
11 reserved
 
|-
|-
| 10
| 10
| GPIO-SNVS
| G0
| SNVS-TAMPER9
| Green 0 input
| SNVS_TAMPER9
| GPIO5_IO09
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 11
| 11
| USB
| G1
| USB-OTG2-VBUS
| Green 1 input
| USB_OTG2_VBUS
| -
| +5V USB bus. Leave open if not used.
|-
|-
| 12
| 12
| GPIO-SNVS
| G2
| SNVS-TAMPER5
| Green 2 input
| SNVS_TAMPER5
| GPIO5_IO05
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 13
| 13
| USB
| G3
| USB-OTG1-VBUS
| Green 3 input
| USB_OTG1_VBUS
| -
| +5V USB bus. Leave open if not used.
|-
|-
| 14
| 14
| Ctrl
| G4
| ONOFF
| Green 4 input
| SRC_RESET_B
|
| Input for power interrupt generation. Leave open if not used.
|-
|-
| 15
| 15
| Power
| G5
| GND
| Green 5 input
| -
| -
| -
|-
|-
| 16
| 16
| Ctrl
| G6
| POR-B
| Green 6 input
| POR_B
| -
| Cold reset negative logic input resets all modules and logic in the IC.
May be used in addition to internally generated power on reset signal (logical AND, both internal and external signals are considered active low).
|-
|-
| 17
| 17
| Power
| G7
| GND
| Green 7 input
| -
| -
| -
|-
|-
| 18
| 18
| GPIO-SNVS
| GND
| SNVS-TAMPER8
| Power supply
| SNVS_TAMPER8
| GPIO5_IO08
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 19
| 19
| USB
| R0
| USB-OTG2-DP
| Red 0 input
| USB_OTG2_DP
| -
| Leave open if not used.
|-
|-
| 20
| 20
| Power
| R1
| GND
| Red 1 input
| -
| -
| -
|-
|-
| 21
| 21
| USB
| R2
| USB-OTG2-DN
| Red 2 input
| USB_OTG2_DN
| -
| Leave open if not used.
|-
|-
| 22
| 22
| Power
| R3
| GND
| Red 3 input
| -
| -
| -
|-
|-
| 23
| 23
| Power
| R4
| GND
| Red 4 input
| -
| -
| -
|-
|-
| 24
| 24
| GPIO-SNVS
| R5
| SNVS-TAMPER7
| Red 5 input
| SNVS_TAMPER7
| GPIO5_IO07
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 25
| 25
| USB
| R6
| USB-OTG1-DP
| Red 6 input
| USB_OTG1_DP
| -
| Leave open if not used.
|-
|-
| 26
| 26
| Power
| R7
| GND
| Red 7 input
| -
| -
| -
|-
|-
| 27
| 27
| USB
| GND
| USB-OTG1-DN
| Power supply
| USB_OTG1_DN
| -
| Leave open if not used.
|-
|-
| 28
| 28
| Power
| DE
| GND
| DE display controller input
| -
| -
| -
|-
|-
| 29
| 29
| Power
| HSYNC
| GND
| HSYNC display controller input
| -
| -
| -
|-
|-
| 30
| 30
| GPIO-SNVS
| VSYNC
| SNVS-TAMPER4
| VSYNC display controller input
| SNVS_TAMPER4
| GPIO5_IO04
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 31
| 31
| USB
| GND
| nUSB-OTG-CHD
| Power supply
| USB_OTG1_CHD_B
| -
| Leave open if not used.
|-
|-
| 32
| 32
| GPIO-SNVS
| DCLK
| SNVS-TAMPER1
| Main clock input (display controller)
| SNVS_TAMPER1
| GPIO5_IO01
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 33
| 33
| JTAG
| GND
| JTAG-MOD
| Power supply
| JTAG_MOD
| -
| Leave open if not used.
|-
|-
| 34
| 34
| GPIO-SNVS
| -
| SNVS-TAMPER3
| -
| SNVS_TAMPER3
| GPIO5_IO03
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 35
| 35
| Power
| GND
| -
| -
| -
| -
| -
|-
|-
| 36
| 36
| GPIO-SNVS
| nINT
| SNVS-TAMPER0
| Touch-panel controller interrupt output (OC with 10kΩ pull-up)
| SNVS_TAMPER0
| GPIO5_IO00
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 37
| 37
|  
| GPIO1
| CLK1-N
| PWM signal input for backlight control (leave open if not used)
| CCM_CLK1_N
| -
| General purpose differential high speed clock input/output.
Leave open if not used.
|-
|-
| 38
| 38
| Power
| GND
| -
| -
| -
| -
| -
|-
|-
| 39
| 39
|
| CLK1-P
| CCM_CLK1_P
| -
| -
| General purpose differential high speed clock input/output.
| -
Leave open if not used.
|-
|-
| 40
| 40
| Power
| GND
| -
| -
| -
| -
| -
|-
|-
| 41
| 41
| Power
| GND
| -
| -
| -
| -
| -
|-
|-
| 42
| 42
| GPIO-SNVS
| SCL
| SNVS-TAMPER6
| Touch-panel controller SCL input (with 2.2kΩ pull-up)
| SNVS_TAMPER6
| GPIO5_IO06
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 43
| 43
| JTAG
| SDA
| JTAG-TDI
| Touch-panel controller SDA IO (with 2.2kΩ pull-up)
| JTAG_TDI
| -
| JTAG TDI input line.
|-
|-
| 44
| 44
| GPIO-SNVS
| GND
| SNVS-TAMPER2
| Power supply
| SNVS_TAMPER2
| GPIO5_IO02
| Tamper input (SNVS power domain) or GPIO 3.3V.
|-
|-
| 45
| 45
| GPIO
| NC
| GPIO-8
| No external connections!
| GPIO1_IO08
| PWM1_OUT
 
WDOG1_WDOG_B
 
SPDIF_OUT
 
CSI_VSYNC
 
USDHC2_VSELECT
 
CCM_PMIC_RDY
 
UART5_RTS_B
 
| Universal GPIO with 3.3V logic levels.
|-
|-
| 46
| 46
| JTAG
| NC
| JTAG-TMS
| No external connections!
| JTAG_TMS
| -
| JTAG TMS input line.
|-
|-
| 47
| 47
| GPIO
| +5V
| GPIO-4
| Power supply
| GPIO1_IO04
| ENET1_REF_CLK1
 
PWM3_OUT
 
USB_OTG1_PWR
 
USDHC1_RESET_B
 
ENET2_1588_EVENT0_IN
 
UART5_TX
 
| Universal GPIO with 3.3V logic levels.
|-
|-
| 48
| 48
| JTAG
| +5V
| JTAG-nTRST
| Power supply
| JTAG_TRST_B
| -
| JTAG TRST input line (active L).
|-
|-
| 49
| 49
| GPIO
| nRES_TP
| GPIO-5
| Touch-panel controller reset signal
| GPIO1_IO05
| ENET2_REF_CLK2
 
PWM4_OUT
 
ANATOP_OTG2_ID
 
CSI_FIELD
 
USDHC1_VSELECT
 
ENET2_1588_EVENT0_OUT
 
UART5_RX
 
| Universal GPIO with 3.3V logic levels.
WLAN-ENABLE in SOM with WiFi/BT module
|-
|-
| 50
| 50
| Power
| PWREN
| GND
| Backlight LEDs on/off, with 10kΩ pull-up resisitor (level +5V).<br />If PWREN pin is open or connected to "1" - LEDs are on.
| -
|}
| -
| -
|-
| 51
| Power
| GND
| -
| -
| -
|-
| 52
| JTAG
| JTAG-TDO
| JTAG_TDO
| -
| JTAG TDO output line.
|-
| 53
| GPIO
| GPIO-7
| GPIO1_IO07
| NET1_MDC
 
ENET2_MDC
 
USB_OTG_HOST_MODE
 
CSI_PIXCLK
 
USDHC2_CD_BCCM_STOP
 
UART1_RTS_B
 
| Universal GPIO with 3.3V logic levels.
|-
| 54
| JTAG
| JTAG-TCK
| JTAG_TCK
| -
| JTAG TCK input line.
Connected to JTAG-TCK line (via separating resistor 10k).
|-
| 55
| GPIO
| GPIO-3
| GPIO1_IO03
| I2C1_SDA
 
GPT1_COMPARE3
 
USB_OTG2_OC
 
USDHC1_CD_B
 
CCM_DI0_EXT_CLK
 
SRC_TESTER_ACK
 
| Universal GPIO with 3.3V logic levels.
|-
| 56
| GPIO
| GPIO-9
| GPIO1_IO09
| PWM2_OUT
 
WDOG1_WDOG_ANY
 
SPDIF_IN
 
CSI_HSYNC
 
USDHC2_RESET_B
 
USDHC1_RESET_B
 
UART5_CTS_B
 
| Universal GPIO with 3.3V logic levels.
|-
| 57
| COM-GPIO
| UART1-TXD
| UART1_TX_DATA
| ENET1_RDATA02
 
I2C3_SCL
 
CSI_DATA02
 
GPT1_COMPARE1
 
GPIO1_IO16
 
SPDIF_OUT
 
UART5_TX
 
| Default: UART1 TxD output or universal GPIO with 3.3V logic levels.
|-
| 58
| GPIO
| GPIO-2
| GPIO1_IO02
| I2C1_SCL
 
GPT1_COMPARE2
 
USB_OTG2_PWR
 
ENET1_REF_CLK_25M
 
USDHC1_WPS
 
DMA_EXT_EVENT00
 
SRC_ANY_PU_RESET
 
UART1_TX


| Universal GPIO with 3.3V logic levels.
== Recommended power supply connection ==
|-
[[File:SL-TFT7-TP-800-480-connection-5V.png|center]]<br>
| 59
| Power
| GND
| -
| -
| -
|-
| 60
| Power
| GND
| -
| -
| -
|-
| 61
| GPIO
| GPIO-6
| GPIO1_IO06
| ENET1_MDIO
 
ENET2_MDIO
 
USB_OTG_PWR_WAKE
 
CSI_MCLK
 
USDHC2_WPCCM_WAIT
 
CCM_REF_EN_B
 
UART1_CTS_B
 
| Universal GPIO with 3.3V logic levels.
|-
| 62
| GPIO
| GPIO-1
| GPIO1_IO01
| I2C2_SDA
 
GPT1_COMPARE1
 
USB_OTG1_OC
 
ENET2_REF_CLK2
 
MQS_LEFT
 
ENET1_1588_EVENT0_OUT
 
SRC_EARLY_RESET
 
WDOG1_WDOG_B
 
| Universal GPIO with 3.3V logic levels.
|-
| 63
| COM-GPIO
| UART1-RXD
| UART1_RX_DATA
| ENET1_RDATA03
 
I2C3_SDA
 
CSI_DATA03
 
GPT1_CLK
 
GPIO1_IO17
 
SPDIF_IN
 
UART5_RX
 
| Default: UART1 RxD input or universal GPIO with 3.3V logic levels.
|-
| 64
| GPIO
| GPIO-0
| GPIO1_IO00
| I2C2_SCL
 
GPT1_CAPTURE1
 
ANATOP_OTG1_ID
 
ENET1_REF_CLK1
 
MQS_RIGHT
 
ENET1_1588_EVENT0_IN
 
SRC_SYSTEM_RESET
 
WDOG3_WDOG_B
 
| Universal GPIO with 3.3V logic levels.
|-
| 65
| COM-GPIO
| UART2-TXD
| UART2_TX_DATA
| ENET1_TDATA02
 
I2C4_SCL
 
CSI_DATA06
 
GPT1_CAPTURE1
 
GPIO1_IO20
 
ECSPI3_SS0
 
| Default: UART2 TxD output or universal GPIO with 3.3V logic levels.
|-
| 66
| COM-GPIO
| UART1-CTS
| UART1_CTS_B
| ENET1_RX_CLK
 
USDHC1_WP
 
CSI_DATA04
 
ENET2_1588_EVENT1_IN
 
GPIO1_IO18
 
USDHC2_WP
 
UART5_CTS_B
 
| Default: UART1 CTS output or universal GPIO with 3.3V logic levels.
|-
| 67
| COM-GPIO
| UART2-RXD
| UART2_RX_DATA
| ENET1_TDATA03
 
I2C4_SDA
 
CSI_DATA07
 
GPT1_CAPTURE2
 
GPIO1_IO21
 
SJC_DONE
 
ECSPI3_SCLK
 
| Default: UART2 RxD input or universal GPIO with 3.3V logic levels.
|-
| 68
| COM-GPIO
| UART5-RXD
| UART5_RX_DATA
| ENET2_COL
 
I2C2_SDA
 
CSI_DATA15
 
CSU_CSU_INT_DEB
 
GPIO1_IO31
 
ECSPI2_MISO
 
EPDC_PWRCTRL03
 
| Default: UART5 RxD input or universal GPIO with 3.3V logic levels.
|-
| 69
| COM-GPIO
| UART3-TXD
| UART3_TX_DATA
| ENET2_RDATA02
 
CSI_DATA01
 
UART2_CTS_B
 
GPIO1_IO24
 
SJC_JTAG_ACT
 
| Default: UART3 TxD input or universal GPIO with 3.3V logic levels.
|-
| 70
| Power
| GND
| -
| -
| -
|-
| 71
| Power
| GND
| -
| -
| -
|-
| 72
| COM-GPIO
| UART2-CTS
| UART2_CTS_B
| ENET1_CRS
 
FLEXCAN2_TXCSI_DATA08
 
GPT1_COMPARE2
 
GPIO1_IO22
 
SJC_DE_B
 
ECSPI3_MOSI
 
| Default: UART2 CTS output or universal GPIO with 3.3V logic levels.
|-
| 73
| COM-GPIO
| UART3-RXD
| UART3_RX_DATA
| ENET2_RDATA03
 
CSI_DATA00
 
UART2_RTS_B
 
GPIO1_IO25
 
EPIT1_OUT
 
| Default: UART3 RxD input or universal GPIO with 3.3V logic levels.
|-
| 74
| COM-GPIO
| UART1-RTS
| UART1_RTS_B
| ENET1_TX_ER
 
USDHC1_CD_BCSI_DATA05
 
ENET2_1588_EVENT1_OUT
 
GPIO1_IO19
 
USDHC2_CD_B
 
UART5_RTS_B
 
| Default: UART1 RTS input or universal GPIO with 3.3V logic levels.
|-
| 75
| COM-GPIO
| UART4-TXD
| UART4_TX_DATA
| ENET2_TDATA02
 
I2C1_SCL
 
CSI_DATA12
 
CSU_CSU_ALARM_AUT02
 
GPIO1_IO28
 
ECSPI2_SCLK
 
| Default: UART4 TxD output or universal GPIO with 3.3V logic levels.
|-
| 76
| COM-GPIO
| UART3-CTS
| UART3_CTS_B
| ENET2_RX_CLK
 
FLEXCAN1_TX
 
CSI_DATA10
 
ENET1_1588_EVENT1_IN
 
GPIO1_IO26
 
EPIT2_OUT
 
| Default: UART3 CTS output or universal GPIO with 3.3V logic levels.
|-
| 77
| COM-GPIO
| UART4-RXD
| UART4_RX_DATA
| ENET2_TDATA03
 
I2C1_SDA
 
CSI_DATA13
 
CSU_CSU_ALARM_AUT01
 
GPIO1_IO29
 
ECSPI2_SS0
 
EPDC_PWRCTRL01
 
| Default: UART4 RxD input or universal GPIO with 3.3V logic levels.
|-
| 78
| COM-GPIO
| UART2-RTS
| UART2_RTS_B
| ENET1_COL
 
FLEXCAN2_RX
 
CSI_DATA09
 
GPT1_COMPARE3
 
GPIO1_IO23
 
SJC_FAIL
 
ECSPI3_MISO
 
| Default: UART2 RTS input or universal GPIO with 3.3V logic levels.
|-
| 79
| COM-GPIO
| UART5-TXD
| UART5_TX_DATA
| GPIO1_IO30
 
ECSPI2_MOSI
 
EPDC_PWRCTRL02
 
ENET2_CRS
 
I2C2_SCL
 
CSI_DATA14
 
CSU_CSU_ALARM_AUT00
 
| Default: UART5 TxD output or universal GPIO with 3.3V logic levels.
|-
| 80
| COM-GPIO
| UART3-RTS
| UART3_RTS_B
| ENET2_TX_ER
 
FLEXCAN1_RX
 
CSI_DATA11
 
ENET1_1588_EVENT1_OUT
 
GPIO1_IO27
 
WDOG1_WDOG_B
 
| Default: UART3 RTS input or universal GPIO with 3.3V logic levels.
|-
| 81
| Power
| GND
| -
| -
| -
|-
| 82
| Power
| GND
| -
| -
| -
|-
| 83
| NC
| -
| -
| -
| -
|-
| 84
| Power
| GND
| -
| -
| -
|-
| 85
| Power
| +3.3VOUT
| -
| -
| +3.3V generated by SOM's LDO.
|-
| 86
| NC
| -
| -
| -
| -
|-
| 87
| Power
| +3.3VOUT
| -
| -
| +3.3V generated by SOM's LDO.
|-
| 88
| Power
| +3.3VOUT
| -
| -
| +3.3V generated by SOM's LDO.
|-
| 89
| Power
| +3.3VOUT
| -
| -
| +3.3V generated by SOM's LDO.
|-
| 90
| Power
| +3.3VOUT
| -
| -
| +3.3V generated by SOM's LDO.
|-
| 91
| Power
| +3.3VOUT
| -
| -
| +3.3V generated by SOM's LDO.
|-
| 92
| Power
| +3.3VOUT
| -
| -
| +3.3V generated by SOM's LDO.
|-
| 93
| Power
| +3.3VOUT
| -
| -
| +3.3V generated by SOM's LDO.
|-
| 94
| NC
| -
| -
| -
| -
|-
| 95
| NC
| -
| -
| -
| -
|-
| 96
| Power
| +5VIN
| -
| -
| +4.0-5.5V input power supply.
|-
| 97
| Ethernet
| ENET1-RXD0
| ENET1_RX_DATA0
| UART4_RTS_B
 
PWM1_OUT
 
CSI_DATA16
 
FLEXCAN1_TX
 
GPIO2_IO00
 
KPP_ROW00
 
USDHC1_LCTL
 
EPDC_SDCE04
 
| Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 98
| Power
| +5VIN
| -
| -
| +4.0-5.5V input power supply.
|-
| 99
| Ethernet
| ENET1-RXD1
| ENET1_RX_DATA1
| UART4_CTS_B
 
PWM2_OUT
 
CSI_DATA17
 
FLEXCAN1_RX
 
GPIO2_IO01
 
KPP_COL00
 
USDHC2_LCTL
 
EPDC_SDCE05
 
| Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 100
| Power
| +5VIN
| -
| -
| +4.0-5.5V input power supply.
|-
| 101
| Ethernet
| ENET1-CRS-DV
| ENET1_RX_EN
| UART5_RTS_B
 
CSI_DATA18
 
FLEXCAN2_TX
 
GPIO2_IO02
 
KPP_ROW01
 
USDHC1_VSELECT
 
EPDC_SDCE06
 
| Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 102
| Power
| +5VIN
|
|
| +4.0-5.5V input power supply.
|-
| 103
| Power
| GND
| -
| -
| -
|-
| 104
| Power
| +5VIN
|
|
| +4.0-5.5V input power supply.
|-
| 105
| Ethernet
| ENET2-TX-CLK
| ENET2_TX_CLK
| UART8_CTS_B
 
ECSPI4_MISO
 
ENET2_REF_CLK2
 
GPIO2_IO14
 
KPP_ROW07
 
ANATOP_OTG2_ID
 
EPDC_SDDO14
 
| Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
10R resistor connected in series.
|-
| 106
| Power
| +5VIN
|
|
| +4.0-5.5V input power supply.
|-
| 107
| Power
| GND
| -
| -
| -
|-
| 108
| Power
| +5VIN
|
|
| +4.0-5.5V input power supply.
|-
| 109
| Ethernet
| ENET2-RXER
| ENET2_RX_ER
| UART8_RTS_B
 
ECSPI4_SS0
 
EIM_ADDR25
 
GPIO2_IO15
 
KPP_COL07
 
WDOG1_WDOG_ANY
 
EPDC_SDDO15
 
| Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
Connected to WD_G-B line.
|-
| 110
| Power
| +5VIN
| -
| -
| +4.0-5.5V input power supply.
|-
| 111
| Ethernet
| ENET2-RXD0
| ENET2_RX_DATA0
| UART6_TX
 
I2C3_SCL
 
ENET1_MDIO
 
GPIO2_IO08
 
KPP_ROW04
 
USB_OTG1_PWR
 
EPDC_SDDO08
 
| Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 112
| Power
| +5VIN
| -
| -
| +4.0-5.5V input power supply.
|-
| 113
| Ethernet
| ENET2-RXD1
| ENET2_RX_DATA1
| UART6_RX
 
I2C3_SDA
 
ENET1_MDC
 
GPIO2_IO09
 
KPP_COL04
 
USB_OTG1_OCE
 
PDC_SDDO09
 
| Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 114
| Ethernet
| ENET1-TXEN
| ENET1_TX_EN
| UART6_RTS_B
 
PWM6_OUT
 
CSI_DATA21
 
ENET2_MDC
 
GPIO2_IO05
 
KPP_COL02
 
WDOG2_WDOG_RST_B_DEB
 
EPDC_SDCE09
 
| Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 115
| Power
| GND
| -
| -
| -
|-
| 116
| Power
| GND
| -
| -
| -
|-
| 117
| Ethernet
| ENET2-CRS-DV
| ENET2_RX_EN
| UART7_TX
 
I2C4_SCL
 
EIM_ADDR26
 
GPIO2_IO10
 
KPP_ROW05
 
ENET1_REF_CLK_25M
 
EPDC_SDDO10
 
| Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 118
| Ethernet
| ENET1-TX-CLK
| ENET1_TX_CLK
| UART7_CTS_B
 
PWM7_OUT
 
CSI_DATA22
 
ENET1_REF_CLK1
 
GPIO2_IO06
 
KPP_ROW03
 
GPT1_CLK
 
EPDC_SDOED
 
| Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
10R resistor connected in series.
|-
| 119
| Ethernet
| ENET2-TXD1
| ENET2_TX_DATA1
| UART8_TX
 
ECSPI4_SCLK
 
EIM_EB_B03
 
GPIO2_IO12
 
KPP_ROW06
 
USB_OTG2_PWR
 
EPDC_SDDO12
 
| Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 120
| Power
| GND
| -
| -
| -
|-
| 121
| Ethernet
| ENET2-TXEN
| ENET2_TX_EN
| UART8_RX
 
ECSPI4_MOSI
 
EIM_ACLK_FREERUN
 
GPIO2_IO13
 
KPP_COL06
 
USB_OTG2_OC
 
EPDC_SDDO13
 
|
|-
| 122
| Ethernet
| ENET1-TXD0
| ENET1_TX_DATA0
| UART5_CTS_B
 
CSI_DATA19
 
FLEXCAN2_RX
 
GPIO2_IO03
 
KPP_COL01
 
USDHC2_VSELECT
 
EPDC_SDCE07
 
| Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 123
| Ethernet
| ENET2-TXD0
| ENET2_TX_DATA0
| UART7_RX
 
I2C4_SDA
 
EIM_EB_B02
 
GPIO2_IO11
 
KPP_COL05
 
EPDC_SDDO11
 
| Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 124
| Ethernet
| ENET1-TXD1
| ENET1_TX_DATA1
| UART6_CTS_B
 
PWM5_OUT
 
CSI_DATA20
 
ENET2_MDIO
 
GPIO2_IO04
 
KPP_ROW02
 
WDOG1_WDOG_RST_B_DEB
 
EPDC_SDCE08
 
| Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 125
| Power
| GND
| -
| -
| -
|-
| 126
| Ethernet
| ENET1-RXER
| ENET1_RX_ER
| UART7_RTS_B
 
PWM8_OUT
 
CSI_DATA23
 
EIM_CRE
 
GPIO2_IO07
 
KPP_COL03
 
GPT1_CAPTURE2
 
EPDC_SDOEZ
 
| Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels.
|-
| 127
| Power
| GND
| -
| -
| -
|-
| 128
| Power
| GND
| -
| -
| -
|-
| 129
| LCD
| LCD-DATA21
| LCD_DATA21
| UART8_RX
 
ECSPI1_SS0
 
CSI_DATA13
 
EIM_DATA13
 
GPIO3_IO26
 
SRC_BT_CFG29
 
USDHC2_DATA1
 
EPDC_SDCE01
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 130
| Power
| GND
| -
| -
| -
|-
| 131
| LCD
| LCD-DATA22
| LCD_DATA22
| MQS_RIGHT
 
ECSPI1_MOSI
 
CSI_DATA14
 
EIM_DATA14
 
GPIO3_IO27
 
SRC_BT_CFG30
 
USDHC2_DATA2
 
USDHC2_DATA2
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 132
| Power
| GND
| -
| -
| -
|-
| 133
| LCD
| LCD-DATA17
| LCD_DATA17
| UART7_RX
 
CSI_DATA00
 
EIM_DATA09
 
GPIO3_IO22
 
SRC_BT_CFG25
 
USDHC2_DATA7
 
EPDC_GDSP
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 134
| LCD
| LCD-DATA23
| LCD_DATA23
| MQS_LEFT
 
ECSPI1_MISO
 
CSI_DATA15
 
EIM_DATA15
 
GPIO3_IO28
 
SRC_BT_CFG31
 
USDHC2_DATA3
 
EPDC_SDCE03
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 135
| Power
| GND
| -
| -
| -
|-
| 136
| Power
| GND
| -
| -
| -
|-
| 137
| LCD
| LCD-DATA18
| LCD_DATA18
| PWM5_OUT
 
CA7_MX6ULL_EVENTO
 
CSI_DATA10
 
EIM_DATA10
 
GPIO3_IO23
 
SRC_BT_CFG26
 
USDHC2_CMD
 
EPDC_BDR01
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 138
| LCD
| LCD-DATA19
| LCD_DATA19
| PWM6_OUT
 
WDOG1_WDOG_ANY
 
CSI_DATA11
 
EIM_DATA11
 
GPIO3_IO24
 
SRC_BT_CFG27
 
USDHC2_CLK
 
EPDC_VCOM00
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 139
| LCD
| LCD-DATA13
| LCD_DATA13
| SAI3_TX_BCLK
 
CSI_DATA21
 
EIM_DATA05
 
GPIO3_IO18
 
SRC_BT_CFG13
 
USDHC2_RESET_B
 
EPDC_BDR00
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 140
| LCD
| LCD-DATA20
| LCD_DATA20
| UART8_TX
 
ECSPI1_SCLK
 
CSI_DATA12
 
EIM_DATA12
 
GPIO3_IO25
 
SRC_BT_CFG28
 
USDHC2_DATA0
 
EPDC_VCOM01
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 141
| LCD
| LCD-DATA14
| LCD_DATA14
| SAI3_RX_DATA
 
CSI_DATA22
 
EIM_DATA06
 
GPIO3_IO19
 
SRC_BT_CFG14
 
USDHC2_DATA4
 
EPDC_SDSHR
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 142
| LCD
| LCD-DATA15
| LCD_DATA15
| SAI3_TX_DATA
 
CSI_DATA23
 
EIM_DATA07
 
GPIO3_IO20
 
SRC_BT_CFG15
 
USDHC2_DATA5
 
EPDC_GDRL
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 143
| LCD
| LCD-DATA8
| LCD_DATA08
| SPDIF_IN
 
CSI_DATA16
 
EIM_DATA00
 
GPIO3_IO13
 
SRC_BT_CFG08
 
FLEXCAN1_TX
 
EPDC_PWRIRQ
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 144
| LCD
| LCD-DATA16
| LCD_DATA16
| UART7_TX
 
CSI_DATA01
 
EIM_DATA08
 
GPIO3_IO21
 
SRC_BT_CFG24
 
USDHC2_DATA6
 
EPDC_GDCLK
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 145
| LCD
| LCD-DATA9
| LCD_DATA09
| SAI3_MCLK
 
CSI_DATA17
 
EIM_DATA01
 
GPIO3_IO14
 
SRC_BT_CFG09
 
FLEXCAN1_RX
 
EPDC_PWRWAKE
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 146
| Power
| GND
| -
| -
| -
|-
| 147
| Power
| GND
| -
| -
| -
|-
| 148
| LCD
| LCD-DATA11
| LCD_DATA11
| SAI3_RX_BCLK
 
CSI_DATA19
 
EIM_DATA03
 
GPIO3_IO16
 
SRC_BT_CFG11
 
FLEXCAN2_RX
 
EPDC_PWRSTAT
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 149
| LCD
| LCD-DATA5
| LCD_DATA05
| UART8_RTS_B
 
ENET2_1588_EVENT2_OUT
 
SPDIF_OUT
 
GPIO3_IO10
 
SRC_BT_CFG05
 
ECSPI1_SS1
 
EPDC_SDDO05
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 150
| LCD
| LCD-DATA12
| LCD_DATA12
| SAI3_TX_SYNC
 
CSI_DATA20
 
EIM_DATA04
 
GPIO3_IO17
 
SRC_BT_CFG12
 
ECSPI1_RDY
 
EPDC_PWRCTRL00
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 151
| LCD
| LCD-DATA6
| LCD_DATA06
| UART7_CTS_B
 
ENET2_1588_EVENT3_IN
 
SPDIF_LOCK
 
GPIO3_IO11
 
SRC_BT_CFG06
 
ECSPI1_SS2
 
EPDC_SDDO06
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 152
| LCD
| LCD-DATA10
| LCD_DATA10
| SAI3_RX_SYNC
 
CSI_DATA18
 
EIM_DATA02
 
GPIO3_IO15
 
SRC_BT_CFG10
 
FLEXCAN2_TX
 
EPDC_PWRCOM
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 153
| LCD
| LCD-DATA0
| LCD_DATA00
| PWM1_OUT
 
ENET1_1588_EVENT2_IN
 
I2C3_SDA
 
GPIO3_IO05
 
SRC_BT_CFG00
 
SAI1_MCLK
 
EPDC_SDDO00
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 154
| LCD
| LCD-DATA3
| LCD_DATA03
| PWM4_OUT
 
ENET1_1588_EVENT3_OUT
 
I2C4_SCL
 
GPIO3_IO08
 
SRC_BT_CFG03
 
SAI1_RX_DATA
 
EPDC_SDDO03
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 155
| LCD
| LCD-DATA1
| LCD_DATA01
| PWM2_OUT
 
ENET1_1588_EVENT2_OUT
 
I2C3_SCL
 
GPIO3_IO06
 
SRC_BT_CFG01
 
SAI1_TX_SYNC
 
EPDC_SDDO01
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 156
| Power
| GND
| -
| -
| -
|-
| 157
| LCD
| LCD-RESET
| LCD_RESET
| LCDIF_CS
 
CA7_MX6ULL_EVENT
 
ISAI3_TX_DATA
 
WDOG1_WDOG_ANY
 
GPIO3_IO04
 
ECSPI2_SS3
 
EPDC_GDOE
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 158
| LCD
| LCD-DATA4
| LCD_DATA04
| UART8_CTS_B
 
ENET2_1588_EVENT2_IN
 
SPDIF_SR_CLK
 
GPIO3_IO09
 
SRC_BT_CFG04
 
SAI1_TX_DATA
 
EPDC_SDDO04
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 159
| Power
| GND
| -
| -
| -
|-
| 160
| LCD
| LCD-HSYNC
| LCD_HSYNC
| LCDIF_RS
 
UART4_CTS_B
 
SAI3_TX_BCLK
 
WDOG3_WDOG_RST_B_DEB
 
GPIO3_IO02
 
ECSPI2_SS1
 
EPDC_SDOE
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 161
| LCD
| LCD-CLK
| LCD_CLK
| LCDIF_WR_RWN
 
UART4_TX
 
SAI3_MCLK
 
EIM_CS2_B
 
GPIO3_IO00
 
WDOG1_WDOG_RST_B_DEB
 
EPDC_SDCLK
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
10R resistor connected in series.
|-
| 162
| LCD
| LCD-VSYNC
| LCD_VSYNC
| LCDIF_BUSY
 
UART4_RTS_B
 
SAI3_RX_DATA
 
WDOG2_WDOG_B
 
GPIO3_IO03
 
ECSPI2_SS2
 
EPDC_SDCE00
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 163
| LCD
| LCD-ENABLE
| LCD_ENABLE
| LCDIF_RD_E
 
UART4_RX
 
SAI3_TX_SYNC
 
EIM_CS3_B
 
GPIO3_IO01
 
ECSPI2_RDY
 
EPDC_SDLE
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 164
| LCD
| LCD-DATA2
| LCD_DATA02
| PWM3_OUT
 
ENET1_1588_EVENT3_IN
 
I2C4_SDA
 
GPIO3_IO07
 
SRC_BT_CFG02
 
SAI1_TX_BCLK
 
EPDC_SDDO02
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 165
| Power
| GND
| -
| -
| -
|-
| 166
| LCD
| LCD-DATA7
| LCD_DATA07
| UART7_RTS_B
 
ENET2_1588_EVENT3_OUT
 
SPDIF_EXT_CLK
 
GPIO3_IO12
 
SRC_BT_CFG07
 
ECSPI1_SS3
 
EPDC_SDDO07
 
| LCD interface signal or universal GPIO with 3.3V logic levels.
|-
| 167
| SDIO
| SDIO1-D0
| SD1_DATA0
| GPT2_COMPARE3
 
SAI2_TX_SYNC
 
FLEXCAN1_TX
 
EIM_ADDR21
 
GPIO2_IO18
 
ANATOP_OTG1_ID
 
| SDIO interface signal or universal GPIO with 3.3V logic levels.
|-
| 168
| Power
| GND
| -
| -
| -
|-
| 169
| SDIO
| SDIO1-D3
| SD1_DATA3
| GPT2_CAPTURE2
 
SAI2_TX_DATA
 
FLEXCAN2_RX
 
EIM_ADDR24
 
GPIO2_IO21
 
CCM_CLKO2
 
ANATOP_OTG2_ID
 
| SDIO interface signal or universal GPIO with 3.3V logic levels.
|-
| 170
| Power
| GND
| -
| -
| -
|-
| 171
| SDIO
| SDIO1-D1
| SD1_DATA1
| GPT2_CLK
 
SAI2_TX_BCLK
 
FLEXCAN1_RX
 
EIM_ADDR22
 
GPIO2_IO19
 
USB_OTG2_PWR
 
| SDIO interface signal or universal GPIO with 3.3V logic levels.
|-
| 172
| Power
| GND
| -
| -
| -
|-
| 173
| SDIO
| SDIO1-CMD
| SD1_CMD
| GPT2_COMPARE1
 
SAI2_RX_SYNC
 
SPDIF_OUT
 
EIM_ADDR19
 
GPIO2_IO16
 
SDMA_EXT_EVENT00
 
USB_OTG1_PWR
 
| SDIO interface signal or universal GPIO with 3.3V logic levels.
|-
| 174
| Power
| GND
| -
| -
| -
|-
| 175
| SDIO
| SDIO1-D2
| SD1_DATA2
| GPT2_CAPTURE1
 
SAI2_RX_DATA
 
FLEXCAN2_TX
 
EIM_ADDR23
 
GPIO2_IO20
 
CCM_CLKO1
 
USB_OTG2_OC
 
| SDIO interface signal or universal GPIO with 3.3V logic levels.
|-
| 176
| Power
| GND
| -
| -
| -
|-
| 177
| Power
| GND
| -
| -
| -
|-
| 178
| Power
| GND
| -
| -
| -
|-
| 179
| SDIO
| SDIO1-CLK
| SD1_CLK
| GPT2_COMPARE2
 
SAI2_MCLK
 
SPDIF_IN
 
EIM_ADDR20
 
GPIO2_IO17
 
USB_OTG1_OC
 
| SDIO interface signal or universal GPIO with 3.3V logic levels.
|-
| 180
| Power
| GND
| -
| -
| -
|-
| 181
| Power
| GND
| -
| -
| -
|-
| 182
| Power
| GND
| -
| -
| -
|-
| 183
| CSI
| CSI-PIXCLK
| CSI_PIXCLK
| USDHC2_WP
 
RAWNAND_CE3_B
 
I2C1_SCL
 
EIM_OE
 
GPIO4_IO18
 
SNVS_HP_VIO_5
 
UART6_RX
 
ESAI_TX2_RX3
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-WAKE in SOM with WiFi/BT module
|-
| 184
| Power
| GND
| -
| -
| -
|-
| 185
| Power
| GND
| -
| -
| -
|-
| 186
| CSI
| CSI-DATA6
| CSI_DATA06
| USDHC2_DATA6
 
ECSPI1_MOSI
 
EIM_AD06
 
GPIO4_IO27
 
SAI1_RX_DATA
 
USDHC1_RESET_BE
 
SAI_TX5_RX0
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-PCM-OUT in SOM with WiFi/BT module
|-
| 187
| CSI
| CSI-MCLK
| CSI_MCLK
| USDHC2_CD_B
 
RAWNAND_CE2_B
 
I2C1_SDA
 
EIM_CS0_B
 
GPIO4_IO17
 
SNVS_HP_VIO_5_CTL
 
UART6_TX
 
ESAI_TX3_RX2
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-ENABLE in SOM with WiFi/BT module
|-
| 188
| CSI
| CSI-DATA7
| CSI_DATA07
| USDHC2_DATA7
 
ECSPI1_MISO
 
EIM_AD07
 
GPIO4_IO28
 
SAI1_TX_DATA
 
USDHC1_VSELECT
 
ESAI_TX0
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-PCM-IN in SOM with WiFi/BT module
|-
| 189
| Power
| GND
| -
| -
| -
|-
| 190
| CSI
| CSI-DATA5
| CSI_DATA05
| USDHC2_DATA5
 
USDHC2_DATA5
 
EIM_AD05
 
GPIO4_IO26
 
SAI1_TX_BCLK
 
USDHC1_CD_BE
 
SAI_TX_CLK
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-PCM-CLK in SOM with WiFi/BT module
|-
| 191
| CSI
| CSI-DATA4
| CSI_DATA04
| USDHC2_DATA4
 
ECSPI1_SCLK
 
EIM_AD04
 
GPIO4_IO25
 
SAI1_TX_SYNC
 
USDHC1_WP
 
ESAI_TX_FS
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-PCM-SYNC in SOM with WiFi/BT module
|-
| 192
| CSI
| CSI-DATA3
| CSI_DATA03
| USDHC2_DATA3
 
ECSPI2_MISO
 
EIM_AD03
 
GPIO4_IO24
 
SAI1_RX_BCLK
 
UART5_CTS_B
 
ESAI_RX_CLK
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-CTS in SOM with WiFi/BT module
|-
| 193
| CSI
| CSI-DATA1
| CSI_DATA01
| USDHC2_DATA1
 
ECSPI2_SS0
 
EIM_AD01
 
GPIO4_IO22
 
SAI1_MCLK
 
UART5_RX
 
ESAI_RX_HF_CLK
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-TXD in SOM with WiFi/BT module
|-
| 194
| CSI
| CSI-DATA2
| CSI_DATA02
| USDHC2_DATA2
 
ECSPI2_MOSI
 
EIM_AD02
 
GPIO4_IO23
 
SAI1_RX_SYNC
 
UART5_RTS_B
 
ESAI_RX_FS
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-RTS in SOM with WiFi/BT module
|-
| 195
| CSI
| CSI-DATA0
| CSI_DATA00
| USDHC2_DATA0
 
ECSPI2_SCLK
 
EIM_AD00
 
GPIO4_IO21
 
SRC_INT_BOOT
 
UART5_TX
 
ESAI_TX_HF_CLK
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-RXD in SOM with WiFi/BT module
|-
| 196
| Power
| CSI-VREF
| -
| -
| Leave open if not used.
|-
| 197
| CSI
| CSI-HSYNC
| CSI_HSYNC
| USDHC2_CMD
 
I2C2_SCL
 
EIM_LBA_B
 
GPIO4_IO20
 
PWM8_OUT
 
UART6_CTS_B
 
ESAI_TX1
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
WLAN-HWAKE in SOM with WiFi/BT module
|-
| 198
| CSI
| CSI-VSYNC
| CSI_VSYNC
| SDHC2_CLK
 
I2C2_SDA
 
EIM_RW
 
GPIO4_IO19
 
PWM7_OUT
 
UART6_RTS_B
 
ESAI_TX4_RX1
 
| Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
BT-HWAKE in SOM with WiFi/BT module
|-
| 199
| Power
| GND
| -
| -
| -
|-
| 200
| Power
| GND
| -
| -
| -
|}


== Dimensions ==
== Dimensions ==
[[File:VisionSOM-6ULL Dimiensions.png|center]]
[[File:SL-TFT7-TP-800-480-wymiary.png|center]]

Latest revision as of 06:25, 29 March 2021

Display module SL-TFT7-TP-800-480 Datasheet and Pinout

General description


SL-TFT7-TP-800-480 is complete display TFT-LCD (800x480 pixels) module integrated with capactive touch-panel. Module is powered from +5V @400mA, data interface is 24-bit parallel RGB + I2C (for touch-panel controller). SL-TFT7-TP-800-480 module is equpiied with FPC50 connector, 1:1 compatible with VisionCB-STD v.1.0 and VisionCB-STD v.1.4. SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch-panel.

Features

  • Powered by Powertip PH800480T013-IBC15 LCD-TFT
  • Display size 7 inches
  • Display LCD matrix 800x480 px
  • Capacitive touch-panel + TP controller
  • 24-b RGB parallel interface
  • Single supply +5V (DC/DC converters built-in)
  • Backlight LEDs built-in
  • Compatible with SoMLabs carrier boards:
    • VisionCB-STD v.1.0
    • VisionCB-STD v.1.4

Multimedia

{{#ev:youtube|NMKK1aid5M0|560x315|center}}
{{#ev:youtube|BeojPOAzAdU|560x315|center}}
{{#ev:youtube|oQTZ0I14acY|560x315|center}}

Pictures





Ordering info

SL-TFT7-TP-800-480 - FPC 50-pin 15-cm flat cable (A-A) is included.

Operating ranges

Parameter Value Unit Comment
Power Supply
5.0
V
 -
Current
0.4
A
 Maximum value, depends on displayed picture and backlight light intensity
Video input voltage
max. 3.3
V
Touch panel controller IO voltage
max. 3.3
V
 I2C interface, 2.2kΩ pull-up resistor on SDA and SCL lines
Environment temperature
-20…+75
 oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+5V Supply Voltage 4.0 5.0 5.5 V
- Total Supply Current 230 330 400 mA
VIO Video IO Input Voltage 0 3.3 3.6 V
VTPIO TP Controller IO Voltage 0 3.3 3.6 V
VPWREN Power Enable Input Voltage 0 - 5.5 V
fTPI2C TP Controller I2C Speed - - 400 kHz
fPWM PWM Dimming Frequency - - 1 kHz
RINT Interrupt Output Pull-up Resistance - 10 - kΩ
RPWREN Power Enable Pull-up Resistance - 10 - kΩ
RTPI2C Touch Panel Controller I2C IOs Pull-up Resistance - 2.2 - kΩ

Pinout



FPC50 connector pin Function name Description
1 B0 Blue 0 input
2 B1 Blue 1 input
3 B2 Blue 2 input
4 B3 Blue 3 input
5 B4 Blue 4 input
6 B5 Blue 5 input
7 B6 Blue 6 input
8 B7 Blue 7 input
9 GND Power supply
10 G0 Green 0 input
11 G1 Green 1 input
12 G2 Green 2 input
13 G3 Green 3 input
14 G4 Green 4 input
15 G5 Green 5 input
16 G6 Green 6 input
17 G7 Green 7 input
18 GND Power supply
19 R0 Red 0 input
20 R1 Red 1 input
21 R2 Red 2 input
22 R3 Red 3 input
23 R4 Red 4 input
24 R5 Red 5 input
25 R6 Red 6 input
26 R7 Red 7 input
27 GND Power supply
28 DE DE display controller input
29 HSYNC HSYNC display controller input
30 VSYNC VSYNC display controller input
31 GND Power supply
32 DCLK Main clock input (display controller)
33 GND Power supply
34 - -
35 - -
36 nINT Touch-panel controller interrupt output (OC with 10kΩ pull-up)
37 GPIO1 PWM signal input for backlight control (leave open if not used)
38 - -
39 - -
40 - -
41 - -
42 SCL Touch-panel controller SCL input (with 2.2kΩ pull-up)
43 SDA Touch-panel controller SDA IO (with 2.2kΩ pull-up)
44 GND Power supply
45 NC No external connections!
46 NC No external connections!
47 +5V Power supply
48 +5V Power supply
49 nRES_TP Touch-panel controller reset signal
50 PWREN Backlight LEDs on/off, with 10kΩ pull-up resisitor (level +5V).
If PWREN pin is open or connected to "1" - LEDs are on.

Recommended power supply connection


Dimensions

Retrieved from "https://wiki.somlabs.com/index.php?title=SL-TFT7-TP-800-480_Datasheet_and_Pinout&oldid=2568"