VisionCB-IND Datasheet and Pinout: Difference between revisions
From SomLabs Wiki
No edit summary |
|||
| (14 intermediate revisions by the same user not shown) | |||
| Line 66: | Line 66: | ||
== Block Diagram == | == Block Diagram == | ||
[[File:CB-IND-blokowy-1-4.png|center]] | [[File:CB-IND-blokowy-1-4.png|center|900px]] | ||
== Electrical parameters == | == Electrical parameters == | ||
| Line 80: | Line 80: | ||
|- | |- | ||
| Power Supply (Con100 input) | | Power Supply (Con100 input) | ||
| 9.0 | |||
| 11.0 | | 11.0 | ||
| 12.0 | | 12.0 | ||
| V | | V | ||
| Polarized terminal block connector | | Polarized terminal block connector | ||
| Line 93: | Line 93: | ||
| Excluding LCD, USB and antoher external loads | | Excluding LCD, USB and antoher external loads | ||
|- | |- | ||
| | | Output GPIO voltage (Con1) | ||
| 0 | | 0 | ||
| - | | - | ||
| 3.3 | | 3.3 | ||
| V | | V | ||
| GPIO connector | | GPIO connector (current limited; max <250mA [RMS]) | ||
|} | |||
== Onboard LEDs == | |||
[[File:VisionCB-IND-1-4-LEDs.png|center|400px]] | |||
{| class="wikitable" | |||
! style="text-align: center; font-weight: bold;" | LED | |||
! style="text-align: center; font-weight: bold;" | Color | |||
! style="text-align: center; font-weight: bold;" | Description | |||
|- | |||
| LED100 (PWR) | |||
| Green | |||
| Power indicator | |||
|- | |||
| LED200 (USB OVR) | |||
| Red | |||
| USB Overcurrent indicator | |||
|- | |||
|} | |} | ||
| Line 113: | Line 133: | ||
| 1 | | 1 | ||
| CSI-HSYNC | | CSI-HSYNC | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 2 | | 2 | ||
| CSI-VSYNC | | CSI-VSYNC | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 3 | | 3 | ||
| CSI-DATA0 | | CSI-DATA0 | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 4 | | 4 | ||
| CSI-DATA2 | | CSI-DATA2 | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 5 | | 5 | ||
| CSI-DATA1 | | CSI-DATA1 | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 6 | | 6 | ||
| CSI-DATA3 | | CSI-DATA3 | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 7 | | 7 | ||
| CSI-DATA4 | | CSI-DATA4 | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 8 | | 8 | ||
| CSI-DATA5 | | CSI-DATA5 | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 9 | | 9 | ||
| CSI-MCLK | | CSI-MCLK | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 10 | | 10 | ||
| CSI-DATA7 | | CSI-DATA7 | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 11 | | 11 | ||
| CSI_PIXCLK | | CSI_PIXCLK | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 12 | | 12 | ||
| CSI-DATA6 | | CSI-DATA6 | ||
| | | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 13 | | 13 | ||
| Line 169: | Line 189: | ||
| 15 | | 15 | ||
| ENET2_TXEN | | ENET2_TXEN | ||
| Default: ENET2 TXEN | | Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 16 | | 16 | ||
| Line 221: | Line 241: | ||
| 28 | | 28 | ||
| JTAG-nTRST | | JTAG-nTRST | ||
| | | JTAG TRST input line (active L). | ||
|- | |- | ||
| 29 | | 29 | ||
| UART3-RXD | | UART3-RXD | ||
| | | Default: UART3 RxD input or universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 30 | | 30 | ||
| Line 237: | Line 257: | ||
| 32 | | 32 | ||
| SNVS-TAMPER2 | | SNVS-TAMPER2 | ||
| | | Tamper input (SNVS power domain) or GPIO 3.3V. | ||
|- | |- | ||
| 33 | | 33 | ||
| Line 245: | Line 265: | ||
| 34 | | 34 | ||
| SNVS-TAMPER3 | | SNVS-TAMPER3 | ||
| | | Tamper input (SNVS power domain) or GPIO 3.3V. | ||
|- | |- | ||
| 35 | | 35 | ||
| Line 253: | Line 273: | ||
| 36 | | 36 | ||
| SNVS-TAMPER4 | | SNVS-TAMPER4 | ||
| | | Tamper input (SNVS power domain) or GPIO 3.3V. | ||
|- | |- | ||
| 37 | | 37 | ||
| Line 261: | Line 281: | ||
| 38 | | 38 | ||
| SNVS-TAMPER5 | | SNVS-TAMPER5 | ||
| | | Tamper input (SNVS power domain) or GPIO 3.3V. | ||
|- | |- | ||
| 39 | | 39 | ||
| SNVS-TAMPER0 | | SNVS-TAMPER0 | ||
| | | Tamper input (SNVS power domain) or GPIO 3.3V. | ||
|- | |- | ||
| 40 | | 40 | ||
| I2C-SCL | | I2C-SCL | ||
| | | Universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 41 | | 41 | ||
| SNVS-TAMPER1 | | SNVS-TAMPER1 | ||
| | | Tamper input (SNVS power domain) or GPIO 3.3V. | ||
|- | |- | ||
| 42 | | 42 | ||
| I2C-SDA | | I2C-SDA | ||
| | | Universal GPIO with 3.3V logic levels. | ||
|- | |- | ||
| 43 | | 43 | ||
| Line 297: | Line 317: | ||
| 47 | | 47 | ||
| VCC-3V3 | | VCC-3V3 | ||
| +3.3V generated by internal SOM LDO converter (limited load current). | | +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]). | ||
|- | |- | ||
| 48 | | 48 | ||
| GND | | GND | ||
| | | Ground | ||
|- | |- | ||
| 49 | | 49 | ||
| VCC-3V3 | | VCC-3V3 | ||
| +3.3V generated by internal SOM LDO converter (limited load current). | | +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]). | ||
|- | |- | ||
| 50 | | 50 | ||
| GND | | GND | ||
| | | Ground | ||
|} | |} | ||
| Line 524: | Line 544: | ||
== Dimensions == | == Dimensions == | ||
[[File:VisionCB-IND-1-4-PCB-size.png|center| | [[File:VisionCB-IND-1-4-PCB-size.png|center|600px]] | ||
Latest revision as of 13:22, 1 August 2018
VisionCB-IND Datasheet and Pinout
General description
VisionCB-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via a standard SODIMM connector.
Applications
- Industrial embedded Linux computer
- Home Appliances
- Home Automation – Smart Home
- Human-machine Interfaces (HMI)
- Point-of-sales (POS) terminals
- Cash Register
- 2D barcode scanners and printers
- Smart grid Infrastructure
- IoT gateways
- Residential getaways
- Machine vision equipment
- Robotics
- Fitness/outdoor equipment
Features
- Industrial grade Carrier Board (Base Board) compatible with the VisionSOM family of modules based on NXP i.MX 6UL / 6ULL application processors
- Core clock up to 696MHz (VisionSOM-6UL) or up to 900MHz (VisionSOM-6ULL)
- Up to 512MB SDRAM DDR3L (depends on used VisionSOM module)
- Up to 512MB NAND Flash / 32GB eMMC / uSD memory card (depends on used VisionSOM module)
- Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.1+EDR module
- SoM Interface: SODIMM200
- Expansion Connectors:
- 2x25 Pin Headers (Female)
- microSD Card socket
- Communication Connectors:
- 1x Ethernet 10/100Mbit/s, RJ45
- 2x USB Host Type A connectors
- 1x USB OTG Micro AB connector
- Display Interface: 50-pin FFC/FPC Parallel RGB – 24-bit, (1366 x 768 Max. Resolution)
- Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)
- Power Supply
- Terminal block connector: Input Voltage 9-12V DC
- Temperature Range: 0 to +70°C
- Board Size: 98mm x 79mm x 22mm
Pictures of VisionCB-IND board
| Version | Photo |
|---|---|
| VisionCB-IND board only |
|
| VisionCB-IND board with VisionSOM-6ULL |
 |
Ordering info
VisionCB-IND
Block Diagram
Electrical parameters
| Parameter | Value | Units | Comment | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| Power Supply (Con100 input) | 9.0 | 11.0 | 12.0 | V | Polarized terminal block connector |
| Supply current | - | - | 0.15 | A | Excluding LCD, USB and antoher external loads |
| Output GPIO voltage (Con1) | 0 | - | 3.3 | V | GPIO connector (current limited; max <250mA [RMS]) |
Onboard LEDs
| LED | Color | Description |
|---|---|---|
| LED100 (PWR) | Green | Power indicator |
| LED200 (USB OVR) | Red | USB Overcurrent indicator |
2x25 pin header
| J504 Pin | Default function name | Description |
|---|---|---|
| 1 | CSI-HSYNC | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 2 | CSI-VSYNC | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 3 | CSI-DATA0 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 4 | CSI-DATA2 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 5 | CSI-DATA1 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 6 | CSI-DATA3 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 7 | CSI-DATA4 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 8 | CSI-DATA5 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 9 | CSI-MCLK | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 10 | CSI-DATA7 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 11 | CSI_PIXCLK | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 12 | CSI-DATA6 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
| 13 | ENET2_TXD0 | Default: ENET2 TXD0 line or universal GPIO with 3.3V logic levels. |
| 14 | UART3-RTS | Default: UART3 RTS line or universal GPIO with 3.3V logic levels. |
| 15 | ENET2_TXEN | Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels. |
| 16 | UART2-RTS | Default: UART2 RTS line or universal GPIO with 3.3V logic levels. |
| 17 | ENET2_CRS_DV | Default: ENET2 CRS_DV line or universal GPIO with 3.3V logic levels. |
| 18 | UART3-CTS | Default: UART3 CTS line or universal GPIO with 3.3V logic levels. |
| 19 | ENET2_RXD1 | Default: ENET2 RXD1 line or universal GPIO with 3.3V logic levels. |
| 20 | UART1-RTS | Default: UART1 RTS line or universal GPIO with 3.3V logic levels. |
| 21 | ENET2_RXER | Default: ENET2 RXER line or universal GPIO with 3.3V logic levels. |
| 22 | UART2-CTS | Default: UART2 CTS line or universal GPIO with 3.3V logic levels. |
| 23 | ENET2_TX_CLK | Default: ENET2 TX_CLK line or universal GPIO with 3.3V logic levels. |
| 24 | UART1-CTS | Default: UART1 CTS line or universal GPIO with 3.3V logic levels. |
| 25 | UART4-RXD | Default: UART4 RXD input or universal GPIO with 3.3V logic levels. |
| 26 | JTAG-TCK | Default: JTAG TCK input or universal GPIO with 3.3V logic levels. |
| 27 | UART4-TXD | Default: UART4 TXD output or universal GPIO with 3.3V logic levels. |
| 28 | JTAG-nTRST | JTAG TRST input line (active L). |
| 29 | UART3-RXD | Default: UART3 RxD input or universal GPIO with 3.3V logic levels. |
| 30 | JTAG-TMS | Default: JTAG TMS output or universal GPIO with 3.3V logic levels. |
| 31 | UART2-RXD | Default: UART2 RXD input or universal GPIO with 3.3V logic levels. |
| 32 | SNVS-TAMPER2 | Tamper input (SNVS power domain) or GPIO 3.3V. |
| 33 | UART2-TXD | Default: UART2 TXD input or universal GPIO with 3.3V logic levels. |
| 34 | SNVS-TAMPER3 | Tamper input (SNVS power domain) or GPIO 3.3V. |
| 35 | UART1-RXD | Default: UART1 RXD input or universal GPIO with 3.3V logic levels. |
| 36 | SNVS-TAMPER4 | Tamper input (SNVS power domain) or GPIO 3.3V. |
| 37 | UART1-TXD | Default: UART1 TXD input or universal GPIO with 3.3V logic levels. |
| 38 | SNVS-TAMPER5 | Tamper input (SNVS power domain) or GPIO 3.3V. |
| 39 | SNVS-TAMPER0 | Tamper input (SNVS power domain) or GPIO 3.3V. |
| 40 | I2C-SCL | Universal GPIO with 3.3V logic levels. |
| 41 | SNVS-TAMPER1 | Tamper input (SNVS power domain) or GPIO 3.3V. |
| 42 | I2C-SDA | Universal GPIO with 3.3V logic levels. |
| 43 | GPIO5 | Default: General purpose pin GPIO5 |
| 44 | JTAG-TDI | Default: JTAG TDI input or universal GPIO with 3.3V logic levels. |
| 45 | GPIO8 | Default: General purpose pin GPIO8 |
| 46 | GPIO9 | Default: General purpose pin GPIO9 |
| 47 | VCC-3V3 | +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]). |
| 48 | GND | Ground |
| 49 | VCC-3V3 | +3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]). |
| 50 | GND | Ground |
TFT LCD connector (RGB 24b, J405)
| J400 pin | Default function name | LCD interface name |
|---|---|---|
| 1 | LCD-DATA0 | LCD-B0 |
| 2 | LCD-DATA1 | LCD-B1 |
| 3 | LCD-DATA2 | LCD-B2 |
| 4 | LCD-DATA3 | LCD-B3 |
| 5 | LCD-DATA4 | LCD-B4 |
| 6 | LCD-DATA5 | LCD-B5 |
| 7 | LCD-DATA6 | LCD-B6 |
| 8 | LCD-DATA7 | LCD-B7 |
| 9 | GND | GND |
| 10 | LCD-DATA8 | LCD-G0 |
| 11 | LCD-DATA9 | LCD-G1 |
| 12 | LCD-DATA10 | LCD-G2 |
| 13 | LCD-DATA11 | LCD-G3 |
| 14 | LCD-DATA12 | LCD-G4 |
| 15 | LCD-DATA13 | LCD-G5 |
| 16 | LCD-DATA14 | LCD-G6 |
| 17 | LCD-DATA15 | LCD-G7 |
| 18 | GND | GND |
| 19 | LCD-DATA16 | LCD-R0 |
| 20 | LCD-DATA17 | LCD-R1 |
| 21 | LCD-DATA18 | LCD-R2 |
| 22 | LCD-DATA19 | LCD-R3 |
| 23 | LCD-DATA20 | LCD-R4 |
| 24 | LCD-DATA21 | LCD-R5 |
| 25 | LCD-DATA22 | LCD-R6 |
| 26 | LCD-DATA23 | LCD-R7 |
| 27 | GND | GND |
| 28 | LCD-DE | DE |
| 29 | LCD-HSYNC | HSYNC |
| 30 | LCD-VSYNC | VSYNC |
| 31 | GND | GND |
| 32 | LCD-PCLK | DCLK |
| 33 | GND | GND |
| 34 | GPIO4 | TS-YPUL |
| 35 | GPIO3 | TS-YNUR |
| 36 | GPIO2 | TS-YPLL |
| 37 | GPIO1 | TS-YNLR |
| 38 | - | - |
| 39 | - | - |
| 40 | - | - |
| 41 | - | - |
| 42 | UART5-TXD | I2C-SCL |
| 43 | UART5-RXD | I2C-SDA |
| 44 | GND | GND |
| 45 | VCC-LCD | +3.3V (controlled by ENET2_TXEN) |
| 46 | VCC-LCD | +3.3V (controlled by ENET2_TXEN) |
| 47 | VCC-5V0 | +5.0V |
| 48 | VCC-5V0 | +5.0V |
| 49 | LCD-RESET | RESET |
| 50 | JTAG-nTRST | PWREN |
Dimensions
