SL-ADP-PCIe-M2 Datasheet and Pinout: Difference between revisions
From SomLabs Wiki
| Line 4: | Line 4: | ||
[[File:SL-ADP-PCIe-M2-ssd.png|800px|center]] | [[File:SL-ADP-PCIe-M2-ssd.png|800px|center]] | ||
<br> | <br> | ||
SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD, single | SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD, single lane) in embedded systems based on i.MX8Mmini MPU. The SL-ADP-PCIe-M2 module is equipped with M.2 key M connector and is compatible with 2242, 2260 or 2280 modules.<br>The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD. | ||
== Features == | == Features == | ||
Revision as of 11:25, 4 May 2021
SL-ADP-PCIe-M2 M.2 PCIe mass storage adapter Datasheet and Pinout
General description
SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD, single lane) in embedded systems based on i.MX8Mmini MPU. The SL-ADP-PCIe-M2 module is equipped with M.2 key M connector and is compatible with 2242, 2260 or 2280 modules.
The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD.
Features
- Equipped with M.2 key M SSD socket
- Single rail +3.3V power supply
- Dual lane PCIe communication interface
- Operating temperature -30÷+85°C
- Fully compatible with SoMLabs carrier boards equippped with PCIe interface on FPC16 connector
- Built-in 32kHz clock source
- Built-in two LEDs
- Compatible with 2242, 2260 and 2280 modules
- Connection with carrier board using FPC16 cable
Pictures
Note: the SSD module shown in the picture is not included in the SL-ADP-PCIe-M2 kit!
Ordering info
SL-ADP-PCIe-M2 - FPC 16-pin flat cable (A-A) is included. The SSD module is not included in the SL-ADP-PCIe-M2 kit.
Operating ranges
| Parameter | Value | Unit | Comment |
|---|---|---|---|
| Power Supply | Powered from carrier board | ||
| Current | Maximum peak value (excluding SSD module) | ||
| Working temperature | oC | - |
Electrical parameters
| Signal name | Parameter | Value | Units | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| +3.3V | Supply Voltage | 3.2 | 3.3 | 3.35 | V |
| I3.3V | Supply Current (3.3V) | 1 | - | 15 | mA |
| fSUSCLK | Suspend mode CLK frequency | - | 32 | - | kHz |
Note:
1. Current consumption value without SSD module.
PCIe Pinout
| FPC16 connector pin | Function name | Description |
|---|---|---|
| 1 | - | - |
| 2 | - | - |
| 3 | +3.3V | Power supply |
| 4 | +3.3V | Power supply |
| 5 | - | - |
| 6 | - | - |
| 7 | GND | - |
| 8 | PCIe_CLK_n | Negative CLK data lane |
| 9 | PCIe_CLK_p | Positive CLK data lane |
| 10 | GND | - |
| 11 | PCIe_TXN_p | Positive TX data lane |
| 12 | PCIe_TXN_n | Negative TX data lane |
| 13 | GND | - |
| 14 | PCIe_RXN_p | Positive RX data lane |
| 15 | PCIe_RXN_n | Negative RX data lane |
| 16 | GND | - |
Note:
1. nPERST, nCLKREQ and nPEWAKE pins are connected to +3.3V with 10k pull-up resistors.
2. 32kHz generator connected to SUSCLK input.
3. ACT LED is controlled by DAS/DSS/nLED1 pin.
Dimensions
