Difference between revisions of "SpaceSOM-8Mplus Datasheet and Pinout"
From SomLabs Wiki
(→SoM pinout) |
(→Electrical parameters) |
||
| Line 206: | Line 206: | ||
== Electrical parameters == | == Electrical parameters == | ||
| − | < | + | {| class="wikitable" |
| + | ! rowspan="2" | SOM<br />signal name | ||
| + | ! rowspan="2" | Parameter | ||
| + | ! colspan="3" | Value | ||
| + | ! rowspan="2" | Unit | ||
| + | |- | ||
| + | | Min. | ||
| + | | Typ. | ||
| + | | Max. | ||
| + | |- | ||
| + | | VDD-5V || Supply Voltage (Input) || 3.9 || 5.0 || 5.5 || V | ||
| + | |||
| + | |||
| + | |- | ||
| + | | VDD-1V8 || Output powers supply for external 1.8V accesories || - || - || 0.5 || A | ||
| + | |- | ||
| + | | VDD-3V3 || Output powers supply for external 3.3V accesories || - || - || 0.5 || A | ||
| + | |- | ||
| + | | VDD-3V3-SW || Switched power supply output voltage || - || 3.3 || - || V | ||
| + | |- | ||
| + | | I<sub>VDD-3V3-SW</sub> || Switched power supply output current || - || - || 0.25 || A | ||
| + | |- | ||
| + | | VGPIO @1V8 || GPIO Input Voltage || 0 || - || 2.15 || V | ||
| + | |- | ||
| + | | VGPIO @3V3 || GPIO Input Voltage || 0 || - || 3.6 || V | ||
| + | |- | ||
| + | | V<sub>USB_VBUS</sub> || USB VBUS Input Voltage || 0 || - || 3.6 || V | ||
| + | |} | ||
| + | Notes:<br /> | ||
| + | 1. Excluding external load connected to +3.3VOUT lines.<br /> | ||
| + | 2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.45V.<br /> | ||
== SoM pinout == | == SoM pinout == | ||
Revision as of 10:05, 28 June 2022
SpaceSOM-8Mplus Datasheet and Pinout
Contents
General description
The SpaceSOM-8Mplus family is a SODIMM-sized SoM based on the NXP quad core i.MX8M plus application processor which features an advanced implementation of NPU (ML+AI) coprocessor, a dual or four ARM Cortex-A53 cores (at speed up to 1.8GHz) and ARM Cortex-M7 core (at speed up to 800MHz) as well as a 2D (HD1080p60) and 3D Graphics Processing Unit (GPU) Open GL 3.01ES compatible and Video Processing Unit (VPU) with D1080p60 H.264 and HD1080p60 H.265 capabilities.
The SpaceSOM-8Mplus is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power and dual-band 2.4/5GHz, 802.11a/b/g/n/ac Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The SpaceSOM-8Mplus provides a variety memory configuration including flexible range of LPDDR4, eMMC or SD memory card that meets our customers requirements.
The SoM supports connections to a variety of interfaces: two high-speed USB 2.0/3.0 on-the-go with PHY, dual Ethernet 1Gbit, audio, display with touch panel and MIPI-DSI/HDMI/LVDS interface and serial communication interfaces. In addition, the system supports industrial grade embedded applications.
SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
Applications
- Machine vision equipment
- Robotics
- Human-machine Interfaces (HMI)
- IP Cameras
- Video Stream Servers
- Home Appliances
- Home Automation – Smart Home
- IoT gateways
- Residential gateways
- Industrial embedded Linux computer
- Fitness/outdoor equipment
Features
- Powered by quad core NXP i.MX8M plus application processor
- Quad ARM Cortex-A53 core at speed up to 1.8GHz
- ARM Cortex-M7 core at speed up to 800MHz
- Integrated Machine-Learning (ML) and Artificial Intelligence (AI) Neural Processing Unit (NPU)
- Up to 4GB DRAM LPDDR4
- Up to 32GB eMMC memory or uSD memory card
- Optional Murata dual-band 2.4/5GHz, 802.11a/b/g/n/ac Wi-Fi and Bluetooth v5.1
- Built-in PCIe 3.0 communication interface
- Built-in dual USB 2.0/3.0 interface
- Built-in HDMI/LVDS and MIPI-DSI display interface
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- Integrated security features
Pictures of SOM versions
| Version | Photo |
|---|---|
| eMMC |
| WiFi/BT module is available for all memory variants configurations. |
Ordering info
SLSNNCpuType_Clock_RamSize_FlashSize_SF_TEMP
| SLS | Product type SLS - System on Module |
| N | SOM Name 3 - High Performance SpaceSOM SODIMM260 module |
| N | CPU Family 5 - i.MX 8M plus |
| CpuType | CPU Type X8MPQC - i.MX 8M plus Quad Core |
| Clock | CPU Clock Speed 1600C - 1.6GHz (Industrial temperature range) 1800C - 1.8GHz (Commercial temperature range) |
| RamSize | LPDDR4 RAM Size 01GR - 1GB (1024MB) 02GR - 2GB (2048MB) 04GR - 4GB (4096MB) |
| FlashSize | eMMC Memory Size 04GE - 4GB eMMC 08GE - 8GB eMMC 16GE - 16GB eMMC 32GE - 32GB eMMC |
| SF | Special Features 0SF - No Special Features 1WB - Built-in dual-band Wi-Fi and Bluetooth v5.1 |
| TEMP | Operating Temperature C - Consumer: 0 to +70 C E - Extended: -25 to +70 C I - Industrial: -40 to +85 C |
Block Diagram
Operating ranges
| Parameter | Value | Unit | Comment |
|---|---|---|---|
| Power Supply | |
|
Connected to VDD 5V SODIM260 pins |
| Max. input GPIO voltage | |
|
- |
| Environment temperature1 | |
oC | Industrial range w/o WiFi module |
| |
Industrial range with WiFi module | ||
| |
Consumer range |
Note:
1. Maximum MPU junction temperature is +105oC.
2. Junction temperature determines MPU lifetime. Details: NXP AN13214 Application Note.
Electrical parameters
| SOM signal name |
Parameter | Value | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| VDD-5V | Supply Voltage (Input) | 3.9 | 5.0 | 5.5 | V
|
| VDD-1V8 | Output powers supply for external 1.8V accesories | - | - | 0.5 | A |
| VDD-3V3 | Output powers supply for external 3.3V accesories | - | - | 0.5 | A |
| VDD-3V3-SW | Switched power supply output voltage | - | 3.3 | - | V |
| IVDD-3V3-SW | Switched power supply output current | - | - | 0.25 | A |
| VGPIO @1V8 | GPIO Input Voltage | 0 | - | 2.15 | V |
| VGPIO @3V3 | GPIO Input Voltage | 0 | - | 3.6 | V |
| VUSB_VBUS | USB VBUS Input Voltage | 0 | - | 3.6 | V |
Notes:
1. Excluding external load connected to +3.3VOUT lines.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.45V.
SoM pinout
Important notes
1. Detail pin configurations description you can find, edit and arrange in dedicated MEX file (with free "iMX PinTool" configurational tool).
2. JTAG-MOD (ball G2) is permanently connected to GND
3. BOOT-MODE0 – RECOVERY line 0 -> BOOT-MODE0=1
4. BOOT-MODE1...MODE3 are premanently connected to GND
5. SDIO2 interface is used to communication with Murata 1ZM radio module
6. eMMC memory is connected to SDIO3 interface
| SOM pin number |
Default function |
GPIO |
Ball number FCBGA548 |
Notes |
|---|---|---|---|---|
| 1 |
GND |
- |
- |
|
| 2 |
GND |
- |
- |
|
| 3 |
JTAG-TMS |
- |
G14 |
3.3V power domain |
| 4 |
UART4-TXD |
GPIO5.29 |
AH5 |
3.3V power domain |
| 5 |
JTAG-TCK |
- |
G18 |
3.3V power domain |
| 6 |
UART4-RXD |
GPIO5.28 |
AJ5 |
3.3V power domain |
| 7 |
JTAG-TDO |
- |
F14 |
3.3V power domain |
| 8 |
CAN1-TX |
GPIO5.03 |
AE18 |
3.3V power domain |
| 9 |
JTAG-TDI |
- |
G16 |
3.3V power domain |
| 10 |
CAN1-RX |
GPIO5.04 |
AD18 |
3.3V power domain |
| 11 |
VDD-3V3 |
- |
- |
3.3V power supply output for external accesories, load max. 300mA |
| 12 |
CAN2-TX |
GPIO4.26 |
AH16 |
3.3V power domain |
| 13 |
I2C2-SDA |
GPIO5.17 |
AE8 |
3.3V power domain |
| 14 |
CAN2-RX |
GPIO4.27 |
AJ15 |
3.3V power domain |
| 15 |
I2C2-SCL |
GPIO5.16 |
AH6 |
3.3V power domain |
| 16 |
GPIO5.05 |
- |
AC18 |
3.3V power domain |
| 17 |
GND |
- |
- |
|
| 18 |
GPIO5.23 |
- |
AJ3 |
3.3V power domain |
| 19 |
SAI3-MCLK |
GPIO5.02 |
AJ20 |
3.3V power domain |
| 20 |
GPIO5.22 |
- |
AD6 |
3.3V power domain |
| 21 |
GND |
- |
- |
|
| 22 |
NC |
- |
- |
|
| 23 |
SAI3-TXD |
GPIO5.01 |
AH18 |
3.3V power domain |
| 24 |
NC |
- |
- |
|
| 25 |
SAI3-TXC |
GPIO5.00 |
AH19 |
3.3V power domain |
| 26 |
UART3-RXD |
GPIO5.26 |
AE6 |
3.3V power domain |
| 27 |
SAI3-TXFS |
GPIO4.31 |
AC16 |
3.3V power domain |
| 28 |
UART3-TXD |
GPIO5.27 |
AJ4 |
3.3V power domain |
| 29 |
SAI3-RXD |
GPIO4.30 |
AF18 |
3.3V power domain |
| 30 |
UART2-RXD |
GPIO5.24 |
AF6 |
3.3V power domain |
| 31 |
SAI3-RXC |
GPIO4.29 |
AJ18 |
3.3V power domain |
| 32 |
UART2-TXD |
GPIO5.25 |
AH4 |
3V3 power domain |
| 33 |
SAI3-RXFS |
GPIO4.28 |
AJ19 |
3.3V power domain |
| 34 |
I2C3-SCL |
GPIO5.18 |
AJ7 |
3.3V power domain |
| 35 |
GND |
- |
- |
|
| 36 |
I2C3-SDA |
GPIO5.19 |
AJ6 |
3.3V power domain |
| 37 |
DDC-SDA |
GPIO3.27 |
AF22 |
|
| 38 |
GND |
- |
- |
|
| 39 |
DDC-SCL |
GPIO3.26 |
AC22 |
I2C5-SCL |
| 40 |
SPI2-CS0 |
GPIO5.13 |
AJ22 |
3.3V power domain |
| 41 |
HDMI-HPD |
GPIO3.29 |
AE22 |
|
| 42 |
SPI2-SCLK |
GPIO5.10 |
AH21 |
3.3V power domain |
| 43 |
HDMI-EARC-AUX |
- |
AH23 |
Dedicated HDMI interface line |
| 44 |
SPI2-MISO |
GPIO5.12 |
AH20 |
3.3V power domain |
| 45 |
HDMI-EARC_N |
- |
AH22 |
Dedicated HDMI interface line |
| 46 |
SPI2-MOSI |
GPIO5.11 |
AJ21 |
3.3V power domain |
| 47 |
HDMI-EARC_P |
- |
AJ23 |
Dedicated HDMI interface line |
| 48 |
SPI1-CS0 |
GPIO5.09 |
AE20 |
3.3V power domain |
| 49 |
HDMI-CEC |
GPIO3.28 |
AD22 |
|
| 50 |
SPI1-SCLK |
GPIO5.06 |
AF20 |
3.3V power domain |
| 51 |
GND |
- |
- |
|
| 52 |
SPI1-MISO |
GPIO5.08 |
AD20 |
3.3V power domain |
| 53 |
HDMI-CK_N |
- |
AJ24 |
Dedicated HDMI interface line |
| 54 |
SPI1-MOSI |
GPIO5.07 |
AC20 |
3.3V power domain |
| 55 |
HDMI-CK_P |
- |
AH24 |
Dedicated HDMI interface line |
| 56 |
GND |
- |
- |
|
| 57 |
GND |
- |
- |
|
| 58 |
LVDS0-DATA3_P |
- |
C29 |
Dedicated LVDS interface line |
| 59 |
HDMI-D0_N |
- |
AJ25 |
Dedicated HDMI interface line |
| 60 |
LVDS0-DATA3_N |
- |
D28 |
Dedicated LVDS interface line |
| 61 |
HDMI-D0_P |
- |
AH25 |
Dedicated HDMI interface line |
| 62 |
GND |
- |
- |
|
| 63 |
HDMI-D1_N |
- |
AJ26 |
Dedicated HDMI interface line |
| 64 |
LVDS0-CLK_P |
- |
A28 |
Dedicated LVDS interface line |
| 65 |
HDMI-D1_P |
- |
AH26 |
Dedicated HDMI interface line |
| 66 |
LVDS0-CLK_N |
- |
B28 |
Dedicated LVDS interface line |
| 67 |
HDMI-D2_N |
- |
AJ27 |
Dedicated HDMI interface line |
| 68 |
GND |
- |
- |
|
| 69 |
HDMI-D2_P |
- |
AH27 |
Dedicated HDMI interface line |
| 70 |
LVDS0-DATA2_P |
- |
B29 |
Dedicated LVDS interface line |
| 71 |
GND |
- |
- |
|
| 72 |
LVDS0-DATA2_N |
- |
C28 |
Dedicated LVDS interface line |
| 73 |
SD1-DQS |
GPIO2.11 |
W26 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 74 |
LVDS0-DATA1_P |
- |
A27 |
Dedicated LVDS interface line |
| 75 |
SD1-CD |
GPIO2.10 |
W25 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 76 |
LVDS0-DATA1_N |
- |
B27 |
Dedicated LVDS interface line |
| 77 |
SD1-DATA7 |
GPIO2.09 |
U25 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 78 |
LVDS0-DATA0_P |
- |
A26 |
Dedicated LVDS interface line |
| 79 |
SD1-DATA6 |
GPIO2.08 |
AA28 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 80 |
LVDS0-DATA0_N |
- |
B26 |
Dedicated LVDS interface line |
| 81 |
SD1-DATA5 |
GPIO2.07 |
AA29 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 82 |
GND |
- |
- |
|
| 83 |
SD1-DATA4 |
GPIO2.06 |
U26 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 84 |
LVDS1-DATA3_P |
- |
C29 |
Dedicated LVDS interface line |
| 85 |
SD1-DATA1 |
GPIO2.03 |
Y28 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 86 |
LVDS1-DATA3_N |
- |
D28 |
Dedicated LVDS interface line |
| 87 |
SD1-DATA0 |
GPIO2.02 |
Y29 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 88 |
GND |
- |
- |
|
| 89 |
GND |
- |
- |
|
| 90 |
LVDS1-CLK_P |
- |
A28 |
Dedicated LVDS interface line |
| 91 |
SD1-CLK |
GPIO2.00 |
W28 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 92 |
LVDS1-CLK_N |
- |
B28 |
Dedicated LVDS interface line |
| 93 |
SD1-CMD |
GPIO2.01 |
W29 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 94 |
GND |
- |
- |
|
| 95 |
SD1-DATA3 |
GPIO2.05 |
V28 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 96 |
LVDS1-DATA2_P |
- |
B29 |
Dedicated LVDS interface line |
| 97 |
SD1-DATA2 |
GPIO2.04 |
V29 |
1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT) |
| 98 |
LVDS1-DATA2_N |
- |
C28 |
Dedicated LVDS interface line |
| 99 |
SD1-NVCC |
- |
- |
SD1 1.8/3.3V power supply output (controlled by SDIO-VSELECT), load max. 80 mA |
| 100 |
LVDS1-DATA1_P |
- |
A27 |
Dedicated LVDS interface line |
| 101 |
VDD-3V3 |
- |
- |
3.3V power supply output for external accesories, load max. 300mA |
| 102 |
LVDS1-DATA1_N |
- |
B27 |
Dedicated LVDS interface line |
| 103 |
USB2-VBUS-OC |
GPIO1.15 |
B5 |
3.3V power domain |
| 104 |
LVDS1-DATA0_P |
- |
A26 |
Dedicated LVDS interface line |
| 105 |
USB2-VBUS |
|
D12 |
|
| 106 |
LVDS1-DATA0_N |
- |
C26 |
Dedicated LVDS interface line |
| 107 |
USB2-VBUS-EN |
GPIO1.14 |
A4 |
3.3V power domain |
| 108 |
GND |
- |
- |
|
| 109 |
USB2-D_P |
- |
D14 |
Dedicated USB2.0 interface line |
| 110 |
PCIe-CLK_P |
- |
D16 |
CLKp line of PCIe interface (serial 100nF is necessary) |
| 111 |
USB2-D_N |
- |
E14 |
Dedicated USB2.0 interface line |
| 112 |
PCIe-CLK_N |
- |
E16 |
CLKn line of PCIe interface (serial 100nF is necessary) |
| 113 |
USB2-ID |
|
E12 |
Dedicated USB2.0 interface line |
| 114 |
GND |
- |
- |
|
| 115 |
USB2-SS-RX_P |
- |
A12 |
Dedicated USB3.0 interface line |
| 116 |
PCIe-TXN_P |
- |
A15 |
TXp line of PCIe interface (serial 100nF is necessary) |
| 117 |
USB2-SS-RX_N |
- |
B12 |
Dedicated USB3.0 interface line |
| 118 |
PCIe-TXN_N |
- |
B15 |
TXn line of PCIe interface (serial 100nF is necessary) |
| 119 |
USB2-SS-TX_N |
- |
B13 |
Dedicated USB3.0 interface line |
| 120 |
GND |
- |
- |
|
| 121 |
USB2-SS-TX_P |
- |
A13 |
Dedicated USB3.0 interface line |
| 122 |
PCIe-RXN_P |
- |
A14 |
TXn line of PCIe interface |
| 123 |
GND |
- |
- |
|
| 124 |
PCIe-RXN_N |
- |
B14 |
TXn line of PCIe interface |
| 125 |
USB1-VBUS-OC |
GPIO1.13 |
A6 |
3.3V power domain |
| 126 |
GND |
- |
- |
|
| 127 |
USB1-VBUS |
- |
A11 |
Dedicated USB2.0 interface line |
| 128 |
GPIO1.08 |
GPIO1.08 |
A8 |
3.3V power domain |
| 129 |
USB1-VBUS-EN |
GPIO1.12 |
A5 |
3.3V power domain |
| 130 |
GPIO1.09 |
GPIO1.09 |
B8 |
3.3V power domain |
| 131 |
USB1-D_P |
- |
D10 |
Dedicated USB2.0 interface line |
| 132 |
GPIO1.00 |
- |
A7 |
3.3V power domain |
| 133 |
USB1-D_N |
- |
E10 |
Dedicated USB2.0 interface line |
| 134 |
GPIO1.10 |
- |
B7 |
3.3V power domain |
| 135 |
USB1-ID |
- |
B11 |
Dedicated USB2.0 interface line |
| 136 |
GPIO1.01 |
- |
E8 |
3.3V power domain |
| 137 |
USB1-SS-RX_P |
- |
A9 |
Dedicated USB3.0 interface line |
| 138 |
GPIO1.11 |
- |
D8 |
3.3V power domain |
| 139 |
USB1-SS-RX_N |
- |
B9 |
Dedicated USB3.0 interface line |
| 140 |
GPIO1.07 |
- |
F6 |
3.3V power domain |
| 141 |
USB1-SS-TX_N |
- |
C10 |
Dedicated USB3.0 interface line |
| 142 |
GPIO1.03 |
- |
D6 |
3.3V power domain |
| 143 |
USB1-SS-TX_P |
- |
A10 |
Dedicated USB3.0 interface line |
| 144 |
GPIO1.04 |
- |
E6 |
3.3V power domain |
| 145 |
GND |
- |
- |
|
| 146 |
GPIO1.05 |
- |
B4 |
3.3V power domain |
| 147 |
ENET2-INT |
GPIO4.19 |
AJ13 |
1.8V power domain |
| 148 |
GPIO1.06 |
- |
A3 |
3.3V power domain |
| 149 |
ENET2-RXC |
GPIO4.11 |
AJ12 |
1.8V power domain |
| 150 |
SYS-LED |
GPIO4.27 |
AH15 |
3.3V power domain |
| 151 |
ENET2-RX-CTL |
GPIO4.10 |
AF12 |
1.8V power domain |
| 152 |
RECOVERY |
- |
G10 |
Recovery input (BOOT-MODE0): =0 during reset – start eMMC recovering =1 or NC – normal operation |
| 153 |
ENET2-RXD0 |
GPIO4.06 |
AD10 |
1.8V power domain |
| 154 |
I2C4-SCL |
GPIO5.20 |
AF8 |
3.3V power domain |
| 155 |
ENET2-RXD1 |
GPIO4.07 |
AE10 |
1.8V power domain |
| 156 |
I2C4-SDA |
GPIO5.21 |
AD8 |
3.3V power domain |
| 157 |
ENET2-RXD2 |
GPIO4.04 |
AH9 |
1.8V power domain |
| 158 |
I2C1-SCL |
GPIO5.14 |
AC8 |
3.3V power domain |
| 159 |
ENET2-RXD3 |
GPIO4.05 |
AJ8 |
1.8V power domain |
| 160 |
I2C1-SDA |
GPIO5.15 |
AH7 |
3.3V power domain |
| 161 |
GND |
- |
- |
|
| 162 |
GND |
- |
- |
|
| 163 |
ENET2-TXC |
GPIO4.17 |
AH14 |
1.8V power domain |
| 164 |
CSI2-DATA3_P |
- |
A21 |
MIPI-CSI video input channel |
| 165 |
ENET2-TX-CTL |
GPIO4.16 |
AH13 |
1.8V power domain |
| 166 |
CSI2-DATA3_N |
- |
B21 |
MIPI-CSI video input channel |
| 167 |
ENET2-TXD0 |
GPIO4.12 |
AJ11 |
1.8V power domain |
| 168 |
CSI2-DATA2_P |
- |
A22 |
MIPI-CSI video input channel |
| 169 |
ENET2-TXD1 |
GPIO4.13 |
AJ10 |
1.8V power domain |
| 170 |
CSI2-DATA2_N |
- |
B22 |
MIPI-CSI video input channel |
| 171 |
ENET2-TXD2 |
GPIO4.14 |
AH11 |
1.8V power domain |
| 172 |
CSI2-DATA1_P |
- |
A24 |
MIPI-CSI video input channel |
| 173 |
ENET2-TXD3 |
GPIO4.15 |
AD12 |
1.8V power domain |
| 174 |
CSI2-DATA1_N |
- |
B24 |
MIPI-CSI video input channel |
| 175 |
ENET2-MDIO |
GPIO4.05 |
AJ8 |
1.8V power domain |
| 176 |
CSI2-DATA0_P |
- |
A25 |
MIPI-CSI video input channel |
| 177 |
ENET2-MDC |
GPIO4.04 |
AH9 |
1.8V power domain |
| 178 |
CSI2-DATA0_N |
- |
B25 |
MIPI-CSI video input channel |
| 179 |
ENET2-RST |
GPIO4.18 |
AC12 |
1.8V power domain |
| 180 |
GND |
- |
- |
|
| 181 |
ENET2-EV1-OUT |
GPIO4.03 |
AF10 |
1.8V power domain |
| 182 |
CSI2-CLK_P |
- |
A23 |
MIPI-CSI video input channel |
| 183 |
ENET2-EV1-IN |
GPIO4.02 |
AC10 |
1.8V power domain |
| 184 |
CSI2-CLK_N |
- |
B23 |
MIPI-CSI video input channel |
| 185 |
ENET2-EV0-OUT |
GPIO4.01 |
AH8 |
1.8V power domain |
| 186 |
GND |
- |
- |
|
| 187 |
ENET2-EV0-IN |
GPIO4.00 |
AJ9 |
1.8V power domain |
| 188 |
CSI1-DATA3_N |
- |
E26 |
MIPI-CSI video input channel |
| 189 |
VDD-1V8 |
- |
- |
1.8V voltage output for external accesories, load max. 400 mA |
| 190 |
CSI1-DATA3_P |
- |
D26 |
MIPI-CSI video input channel |
| 191 |
GND |
- |
- |
|
| 192 |
CSI1-DATA2_N |
- |
E24 |
MIPI-CSI video input channel |
| 193 |
ENET1-INT |
GPIO4.20 |
AE12 |
1.8V power domain |
| 194 |
CSI1-DATA2_P |
- |
D24 |
MIPI-CSI video input channel |
| 195 |
ENET1-RXC |
GPIO1.25 |
AE29 |
1.8V power domain |
| 196 |
CSI1-DATA1_N |
- |
E20 |
MIPI-CSI video input channel |
| 197 |
ENET1-RX-CTL |
GPIO1.24 |
AE28 |
1.8V power domain |
| 198 |
CSI1-DATA1_P |
- |
D20 |
MIPI-CSI video input channel |
| 199 |
ENET1-RXD0 |
GPIO1.26 |
AG29 |
1.8V power domain |
| 200 |
CSI1-DATA0_N |
- |
E18 |
MIPI-CSI video input channel |
| 201 |
ENET1-RXD1 |
GPIO1.27 |
AG28 |
1.8V power domain |
| 202 |
CSI1-DATA0_P |
- |
D18 |
MIPI-CSI video input channel |
| 203 |
ENET1-RXD2 |
GPIO1.28 |
AF29 |
1.8V power domain |
| 204 |
GND |
- |
- |
|
| 205 |
ENET1-RXD3 |
GPIO1.29 |
AF28 |
1.8V power domain |
| 206 |
CSI1-CLK_N |
- |
E22 |
MIPI-CSI video input channel |
| 207 |
GND |
- |
- |
|
| 208 |
CSI1-CLK_P |
- |
D22 |
MIPI-CSI video input channel |
| 209 |
ENET1-TXC |
GPIO1.23 |
AE24 |
1.8V power domain |
| 210 |
GND |
- |
- |
|
| 211 |
ENET1-TX-CTL |
GPIO1.22 |
AF24 |
1.8V power domain |
| 212 |
DSI-CLK_P |
- |
A18 |
DSI1 video output channel |
| 213 |
ENET1-TXD0 |
GPIO1.25 |
AC25 |
1.8V power domain |
| 214 |
DSI-CLK_N |
- |
B18 |
DSI1 video output channel |
| 215 |
ENET1-TXD1 |
GPIO1.20 |
AE26 |
1.8V power domain |
| 216 |
GND |
- |
- |
|
| 217 |
ENET1-TXD2 |
GPIO1.19 |
AF26 |
1.8V power domain |
| 218 |
DSI-DATA0_P |
- |
A16 |
DSI1 video output channel |
| 219 |
ENET1-TXD3 |
GPIO1.18 |
AD24 |
1.8V power domain |
| 220 |
DSI-DATA0_N |
- |
B16 |
DSI1 video output channel |
| 221 |
ENET1-MDIO |
GPIO1.17 |
AH29 |
1.8V power domain |
| 222 |
DSI-DATA1_P |
- |
A17 |
DSI1 video output channel |
| 223 |
ENET1-MDC |
GPIO1.16 |
AH28 |
1.8V power domain |
| 224 |
DSI-DATA1_N |
- |
B17 |
DSI1 video output channel |
| 225 |
ENET1-RST |
|
T28 |
1.8V power domain |
| 226 |
DSI-DATA2_P |
- |
A19 |
DSI1 video output channel |
| 227 |
GPIO3.24 |
- |
AE14 |
1.8V power domain |
| 228 |
DSI-DATA2_N |
- |
B19 |
DSI1 video output channel |
| 229 |
GPIO3.23 |
- |
AF16 |
1.8V power domain |
| 230 |
DSI-DATA3_P |
- |
A20 |
DSI1 video output channel |
| 231 |
GPIO3.22 |
- |
AD16 |
1.8V power domain |
| 232 |
DSI-DATA3_N |
- |
B20 |
DSI1 video output channel |
| 233 |
NC |
- |
- |
|
| 234 |
GND |
- |
- |
|
| 235 |
NC |
- |
- |
|
| 236 |
NC |
- |
- |
|
| 237 |
NC |
- |
- |
|
| 238 |
NC |
- |
- |
|
| 239 |
GND |
- |
- |
|
| 240 |
PWR-ON |
- |
G22 |
ONOFF MPU input 1.8V power domain |
| 241 |
I2C6-SCL |
GPIO3.19 |
AC14 |
I2C6 is used to communication with PMIC PCA9450CHN with internal 1V8 pull-ups. Externally compatible with 3.3V logic standards. |
| 242 |
SYS-RST |
- |
J29 |
Buffered, open-drain POR-B output |
| 243 |
I2C6-SDA |
GPIO3.20 |
AD14 |
I2C6 is used to communication with PMIC PCA9450CHN with internal 1V8 pull-ups. Externally compatible with 3.3V logic standards. |
| 244 |
RST-IN |
- |
- |
PMIC_RST_B input (system reset generated by PMIC) |
| 245 |
VDD5V |
- |
- |
External 5V input |
| 246 |
GND |
- |
- |
|
| 247 |
VDD5V |
- |
- |
External 5V input |
| 248 |
GND |
- |
- |
|
| 249 |
VDD5V |
- |
- |
External 5V input |
| 250 |
GND |
- |
- |
|
| 251 |
VDD5V |
- |
- |
External 5V input |
| 252 |
GND |
- |
- |
|
| 253 |
VDD5V |
- |
- |
External 5V input |
| 254 |
GND |
- |
- |
|
| 255 |
VDD5V |
- |
- |
External 5V input |
| 256 |
GND |
- |
- |
|
| 257 |
VDD5V |
- |
- |
External 5V input |
| 258 |
GND |
- |
- |
|
| 259 |
VDD5V |
- |
- |
External 5V input |
| 260 |
GND |
- |
- |
|
| - |
PMIC-INT |
GPIO3.25 |
AF14 |
Interrupt line connected to IRQ_B PMIC PCA9450CHN |
| - |
SDIO-VSELECT |
GPIO3.21 |
AE16 |
Control line for SDIO1 power supply voltage (LDO5 in PMIC PCA9450CHN, SDIO-VSELECT) |
| - |
GPIO1.02 |
- |
B6 |
WDOG-B |
| - |
BT-CTS |
- |
AJ14 |
1ZM Bluetooth module line (UART1) |
| - |
BT-TXD |
- |
AH17 |
1ZM Bluetooth module line (UART1) |
| - |
BT-RTS |
- |
AJ17 |
1ZM Bluetooth module line (UART1) |
| - |
BT-RXD |
- |
AJ16 |
1ZM Bluetooth module line (UART1) |
| - |
BT-H-WAKE |
GPIO2.20 |
AC26 |
1ZM Bluetooth module line |
| - |
NAND_D0 |
QSPI-D0 |
R25 |
Connection for optional QSPI NOR Flash |
| - |
NAND_D1 |
QSPI-D1 |
L25 |
Connection for optional QSPI NOR Flash |
| - |
NAND_D2 |
QSPI-D2 |
L24 |
Connection for optional QSPI NOR Flash |
| - |
NAND_D3 |
QSPI-D3 |
N24 |
Connection for optional QSPI NOR Flash |
| - |
NAND_ALE |
QSPI-CLK |
N25 |
Connection for optional QSPI NOR Flash |
| - |
NAND_CE0_B |
QSPI-CS |
L26 |
Connection for optional QSPI NOR Flash |
| - |
WLAN-H-WAKE |
GPIO2.19 |
AD28 |
1ZM WiFi module line |
| - |
WLAN-ENABLE |
GPIO2.12 |
AD29 |
1ZM WiFi module line |
Dimensions
