Debian 11 VisionSOM-6ULL: Difference between revisions
From SomLabs Wiki
Created page with "{{PageHeader|Debian Buster}} __toc__ == System image == *System image: [https://ftp.somlabs.com/VisionSOM-6ULL/SoMLabs-VisionSOM-6ULL-Debian-2022-08.zip SoMLabs-VisionSOM-6U..." |
No edit summary |
||
| Line 1: | Line 1: | ||
{{PageHeader|Debian | {{PageHeader|Debian Bullseye}} __toc__ | ||
== System image == | == System image == | ||
Revision as of 10:00, 9 August 2022
Debian Bullseye
System image
- System image: SoMLabs-VisionSOM-6ULL-Debian-2022-08.zip
- Bootloader: SoMLabs-VisionSOM-6ULL-Debian-2022-08-u-boot.imx
Components
The Debian 11 image fo VisionSOM-6ULL module is based on the following components:
- Linux kernel 5.15.5 released by NXP and patched by SoMLabs (https://github.com/SoMLabs/somlabs-linux-imx branch somlabs_imx_5.15.5-1.0.0)
- Stable Debian 11 Bullseye rootfs
- U-Boot 2021.04 (https://github.com/SoMLabs/somlabs-uboot-imx.git branch somlabs-imx_v2021.04_5.15.5-1.0.0)
Access
There are two users available in the default configuration:
- som (password: som)
- root (password: root)
Hardware interfaces
The following hardware interfaces are configured and ready to use:
- UART 1
- connected to Linux console (USB Linux Console socket on VisionCB-STD)
- UART 4
- UART4-TXD (RaspberryPi Connector pin 8)
- UART4-RXD (RaspberryPi Connector pin 10)
- I2C 2
- SDA2 (RaspberryPi Connector pin 3)
- SCL2 (RaspberryPi Connector pin 5)
- SPI
- ECSPI3_MOSI (RaspberryPi Connector pin 19)
- ECSPI3_MISO (RaspberryPi Connector pin 21)
- ECSPI3_SCLK (RaspberryPi Connector pin 23)
- ECSPI3_SS0 (RaspberryPi Connector pin 24)
- CAN
- FLEXCAN1_TX (RaspberryPi Connector pin 33)
- FLEXCAN1_RX (RaspberryPi Connector pin 35)
- GPIO
- GPIO1_IO10 (Amber LED)
- GPIO1_IO11 (Green LED)
- GPIO1_IO12 (Yellow LED)
- GPIO1_IO13 (Red LED)
- ADC
- GPIO1_IO00 RPI 22
Built-in drivers and modules
The full list of available built-in drivers may be read from the file:
/lib/modules/5.15.5-somlabs+/modules.builtin
The list of available loadable modules can be obtained using the command:
find /lib/modules/$(uname -r) -name "*.ko"
Installed software
The full list of installed packages can be obtained using command:
apt list --installed
Checksum (SHA256)
- SoMLabs-VisionSOM-6ULL-Debian-2022-08.img: 9f3ca404f2e7e7aa4355a44a5fba4c7079dc9e78e5085a550f9df91e5058e0ee
- SoMLabs-VisionSOM-6ULL-Debian-2022-08.zip: 8bc3dd29551495e2d7ae1f1ebfa01e4b62b828e803c729907d2d0e1e2f020a4e
- SoMLabs-VisionSOM-6ULL-Debian-2022-08-u-boot.imx: bb4cb073e1ac5962a8965e286a102ceb7d4d275a36dda15fb010fc348a7b1aeb
Changelog
- Debian 11 for VisionSOM-6ULL initial release
