Personal tools

StarSBC-6ULL-STD: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
Created page with "{{Product|category1=SOM|category2=|image=StarCB-6ULL-STD.png |cb_som_compatibility=StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7) |cb_som_socket=Square b2b |cb_dis..."
 
No edit summary
Line 2: Line 2:
|cb_som_compatibility=StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7)
|cb_som_compatibility=StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7)
|cb_som_socket=Square b2b
|cb_som_socket=Square b2b
|cb_display_connector=LVDS<br>HDMI<br>up to 4 lanes MIPI-DSI interface (FPC30)
|cb_display_connector=Parallel RGB 24 bit (FPC50)
|cb_network=1x Ethernet 10/100/1000Mbit/s, RJ45
|cb_network=1x Ethernet 10/100/1000Mbit/s, RJ45
|cb_usb=USB 2.0 host x1<br>USB-OTG 2.0 x1
|cb_usb=USB 2.0 host x1<br>USB-OTG 2.0 x1

Revision as of 11:41, 22 December 2022

StarSBC-6ULL-STD
StarSBC-6ULL-STD VisionCB-8M-ADV is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector.
VisionCB-8M-ADV carrier board is equipped with HDMI/LVDS and MIPI-DSI video outputs, 24-bit audio codec, PCIe (M.2 key M) socket (2242, 2260, 2280), on-board RTC with battery socket, RS-485 and CAN FD interfaces.
VisionCB-8M-ADV carrier board is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM.

Specifications
SOM compatibilityStarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7)
SOM socketSquare b2b
Display connectorParallel RGB 24 bit (FPC50)
Network1x Ethernet 10/100/1000Mbit/s, RJ45
USBUSB 2.0 host x1
USB-OTG 2.0 x1
DebuggerBuilt-in Segger J-Link (JTAG)
Console interfaceUSB/UART
Switches4/2 (user/system)
LEDs4/2/3 (user/system/diagnostic)
ConnectorsM.2 Key E
MIPI-CSI2 camera connector (FPC30)
MicroSD socket
Serial comm (16 pins, 2.54mm)
Power supplyExternal 9-12V DC
Temperature Range0 to +70°C
Dimensions160mm x 100mm x 18mm