StarSBC-6ULL-STD: Difference between revisions
From SomLabs Wiki
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
|cb_switches=4/1 (user/system) | |cb_switches=4/1 (user/system) | ||
|cb_leds=4/2/1 (user/system/diagnostic) | |cb_leds=4/2/1 (user/system/diagnostic) | ||
|cb_connectors= | |cb_connectors=QSPI (dual row 2x5 gold-pin)<br>GPIOs (dual row 2x20 gold-pin) | ||
|cb_power_supply=External 9-12V DC | |cb_power_supply=External 9-12V DC | ||
|temp= 0 to +70°C | |temp= 0 to +70°C | ||
Revision as of 11:44, 22 December 2022
| StarSBC-6ULL-STD |
|
VisionCB-8M-ADV is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via a standard SODIMM connector. |
Documentation
How to
| Specifications |
| SOM compatibility | StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7) |
| SOM socket | Square b2b |
| Display connector | Parallel RGB 24 bit (FPC50) |
| Network | 1x Ethernet 10/100Mbit/s, RJ45 |
| USB | USB 2.0 host x1 USB-OTG 2.0 x1 |
| Console interface | USB/UART |
| Switches | 4/1 (user/system) |
| LEDs | 4/2/1 (user/system/diagnostic) |
| Connectors | QSPI (dual row 2x5 gold-pin) GPIOs (dual row 2x20 gold-pin) |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 130mm x 90mm x 20mm |
