StarSBC-6ULL-STD

StarSBC-6ULL-STD

StarCB-6ULL-STD is a carrier board for the StarSOM-6ULL family of computer-on-modules which are powered by NXP iMX6ULL MPU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, LCD, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. The carrier board connects with the SoM via two board-to-boarf high speed connectors. StarCB-6ULL-STD carrier board is equipped with parallel RGB 24b video output and 10/100 Ethernet interface. StarCB-6ULL-STD carrier board is equipped with Linux serial console port on USB vCOM.

Documentation

• StarCB-6ULL-STD Datasheet and Pinout
• StarSBC-6ULL-STEP3D
• StarSBC-6ULL-SLC2-pin-config
• i.MX 6ULL Fact Sheet

How to

• VisionCB-8M-ADV Power Supply

Specifications

SOM compatibility	StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7)
SOM socket	Square b2b (StarSOM-6ULL format)
Display connector	Parallel RGB 24 bit (FPC50)
Network	1x Ethernet 10/100Mbit/s, RJ45
USB	USB 2.0 host x1 USB-OTG 2.0 x1
Console interface	USB/UART
Switches	4/1 (user/system)
LEDs	4/2/1 (user/system/diagnostic)
Connectors	QSPI (dual row 2x5 gold-pin) GPIOs (dual row 2x20 gold-pin)
Power supply	External 9-12V DC
Temperature Range	0 to +70°C
Dimensions	130mm x 90mm x 20mm