Personal tools

Difference between revisions of "VisionCB-x2L-STD Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(→‎Raspberry Pi compatible I/O header)
(→‎Arduino Uno compatible I/O header)
Line 609: Line 609:
 
| GPIO 3.3 voltage levels
 
| GPIO 3.3 voltage levels
 
|}
 
|}
−
 
−
== Arduino Uno compatible I/O header ==
 
−
[[File:visionCB-8Mmini-arduino.png|center|700px]]
 
−
 
−
 
−
<center>
 
−
{| class="wikitable"
 
−
! style="text-align: center; font-weight: bold;" | Pin
 
−
! style="text-align: center; font-weight: bold;" | Arduino name
 
−
! style="text-align: center; font-weight: bold;" | Default function name
 
−
! style="text-align: center; font-weight: bold;" | Description
 
−
|-
 
−
| colspan="4" | Power connector J700, red connector
 
−
|-
 
−
| 1
 
−
| -
 
−
| -
 
−
| -
 
−
|-
 
−
| 2
 
−
| IOREF
 
−
| VDD-ARDUINO-IO
 
−
| Selected +3.3V or +5V (with V-ARD jumper).
 
−
|-
 
−
| 3
 
−
| RESET
 
−
| POR-B
 
−
| External reset input, active L.
 
−
|-
 
−
| 4
 
−
| 3.3V
 
−
| VCC-3V3
 
−
| +3.3V generated by internal SOM LDO converter (limited load current).
 
−
|-
 
−
| 5
 
−
| 5V
 
−
| VCC-5V0
 
−
| +5V generated by carrier board built-in DC/DC converter.
 
−
|-
 
−
| 6
 
−
| GND
 
−
| GND
 
−
| -
 
−
|-
 
−
| 7
 
−
| GND
 
−
| GND
 
−
| -
 
−
|-
 
−
| 8
 
−
| VIN
 
−
| VCC-3V3
 
−
| +3.3V generated by internal SOM LDO converter (limited load current).
 
−
|-
 
−
| colspan="4" | Analog inputs connector J702, blue connector
 
−
|-
 
−
| 1
 
−
| AIN0
 
−
| -
 
−
| Not internally connected.
 
−
|-
 
−
| 2
 
−
| AIN1
 
−
| -
 
−
| Not internally connected.
 
−
|-
 
−
| 3
 
−
| AIN2
 
−
| -
 
−
| Not internally connected.
 
−
|-
 
−
| 4
 
−
| AIN3
 
−
| -
 
−
| Not internally connected.
 
−
|-
 
−
| 5
 
−
| -
 
−
| -
 
−
| Not internally connected.
 
−
|-
 
−
| 6
 
−
| -
 
−
| -
 
−
| Not internally connected.
 
−
|-
 
−
| colspan="4" | Digital I/Os connector J704, yellow connector
 
−
|-
 
−
| 1
 
−
| DIO0
 
−
| UART3-RXD
 
−
| Default: UART3-RXD line or universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 2
 
−
| DIO1
 
−
| UART3-TXD
 
−
| Default: UART3-TXD line or universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 3
 
−
| DIO2
 
−
| GPIO4-IO15
 
−
| Universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 4
 
−
| DIO3
 
−
| GPIO4-IO14
 
−
| Universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 5
 
−
| DIO4
 
−
| GPIO4-IO13
 
−
| Universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 6
 
−
| DIO5
 
−
| GPIO4-IO12
 
−
| Universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 7
 
−
| DIO6
 
−
| GPIO4-IO11
 
−
| Universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 8
 
−
| DIO7
 
−
| GPIO4-IO10
 
−
| Universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| colspan="4" | Digital I/Os connector J703, yellow connector
 
−
|-
 
−
| 1
 
−
| DIO8
 
−
| GPIO4-IO08
 
−
| Universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 2
 
−
| DIO9
 
−
| GPIO4-IO09
 
−
| Universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 3
 
−
| DIO10
 
−
| SPI1-SS0
 
−
| Default: SPI1-SS0 line or universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 4
 
−
| DIO11
 
−
| SPI1-MOSI
 
−
| Default: SPI1-MOSI line or universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 5
 
−
| DIO12
 
−
| SPI1-MISO
 
−
| Default: SPI1-MISO line or universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 6
 
−
| DIO13
 
−
| SPI1-CLK
 
−
| Default: SPI1-CLK line or universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 7
 
−
| GND
 
−
| GND
 
−
| -
 
−
|-
 
−
| 8
 
−
| AREF
 
−
| VDD-ARDUINO-IO
 
−
| +3.3V or +5V selected with V-ARD jumper.
 
−
|-
 
−
| 9
 
−
| DIO14
 
−
| I2C1-SCL
 
−
| Default: I2C1-SCL line or universal GPIO with 3.3/5V logic levels.
 
−
|-
 
−
| 10
 
−
| DIO15
 
−
| I2C1-SDA
 
−
| Default: I2C1-SDA line or universal GPIO with 3.3/5V logic levels.
 
−
|}
 
−
</center>
 
−
 
−
Notes:<br />
 
−
1. I/O logic levels are selected 3.3/5V with V-ARD jumper.<br />
 
−
2. RESET line is 3.3 and 5V compatible.<br />
 
  
 
== Serial Communication/GPIO header (J305) ==
 
== Serial Communication/GPIO header (J305) ==

Revision as of 18:12, 3 January 2024

VisionCB-x2L-STD v.1.2 Datasheet and Pinout

General description

VisionCB-x2L-STD.png

The VisionCB-x2L-STD (with SOM equipped with Renesas RZ/V2L and RZ/G2L MPUs compatible) is a carrier board for the VisionSOM-V2L and VisionSOM-G2L family of computer-on-modules which are powered by dual-core Renesas MPUs (2 x ARM Cortex-A55 + Cortex-M33). The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, CAN, RS485, audio codec, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. The VisionCB-x2L-STD is equipped with a simple user interface consisting of 4 buttons and 4 LEDs. VisionCB-x2L-STD carrier board is also equipped with a large number of popular peripherals, including: RS485, CAN, 10/100/1G Ethernet, MIPI display and camera connectors, serial console port on USB vCOM.

Applications

  • Multimedia
  • Video streaming
  • Image inspection
  • VisionAI gateway
  • Doorbell systems
  • EV chargers
  • Smart agriculture gateways
  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • IoT gateways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment

Features

  • Carrier Board compatible with the VisionSOM-G2L and VisionSOM-V2L families of modules based on dual core, heterogenous Renesas RZ/V2L and RZ/G2L application processors
  • SoM Connector: SODIMM200
  • Expansion Connectors:
    • ADC+GPIO connector 2x9 Pin Header (Male)
    • Raspberry Pi Compatible Connectors 2x20 Pin Header (Male)
    • Ethernet #1 (GMII) Connector Pin Header (Male)
  • Communication Connectors:
    • 1x Ethernet 10/100/1000Mbit/s (RJ45)
    • 1x CAN (1x3 Pin Header, Male)
    • 1x RS-485 (1x3 Pin Header, Male)
    • 1x USB Host Type A connectors
    • 1x USB OTG Micro AB connector
    • 1x Console MicroUSB B connector
  • Audio Interface:
    • Mini-jack 3.5mm (headphones + microphone)
  • Display Interface:
    • 30-pin FFC/FPC MIPI-DSI (up to 4 lanes)
  • Camera Interface:
    • 30-pin FFC/FPC MIPI-CSI2 (up to 4 lanes)
  • User Interface:
    • 4+1 Pushbuttons
    • 4+2 LEDs
  • External Power Supply 9-12V DC
  • Temperature Range: 0 to +70°C
  • Board Size: 160mm x 100mm x 21mm

Pictures of VisionCB-x2L-STD v1.2 board

Version Photo
VisionCB-x2L-STD v1.2 board only
VisionCB-x2L-STD.png
VisionCB-x2L-STD v1.2 with VisionSOM-x2L
VisionCB-x2L-STD-SOM.png

Ordering info

VisionCB-x2L-STD v1.2

Block Diagram

VisionCB-x2l-std-BLOKOWY.png

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply 9.0 12.0 15.0 V Positive pole on central connector of J200
Supply current - - 0.13 A Excluding LCD, USB and antoher external loads
LCD/Camera Power Supply
(logic) 		3.25 3.3 3.35 V -
LCD/Camera Power Supply
(backlight and aux) 		4.75 4.87 4.95 V -
Arduino GPIO voltage 3.3 V -

Power supply connector

The VisionCB-x2L-STD is equipped with external power source connector with pin diameter 2.5mm and hole diameter 6mm. The voltage of the external power source should be within the range 9-12 VDC.

VisionCB-x2L-STD-power-supply.png

Camera MIPI-CSI interface (FPC/FFC30, 0.5mm)

VisionCB-x2L-STD-CSI.png
Pin Signal GPIO Description
1 GND - -
2 CSI-CLK-P - -
3 CSI-CLK-P - -
4 GND - -
5 CSI-DATA0-P - -
6 CSI-DATA0-N - -
7 GND - -
8 CSI-DATA1-P - -
9 CSI-DATA1-N - -
10 GND - -
11 CSI-DATA2-P - -
12 CSI-DATA2-N - -
13 GND - -
14 CSI-DATA3-P - -
15 CSI-DATA3-N - -
16 GND - -
17 I2C1-SCL RIIC1_SCL Camera confguration I2C interface (3.3V), pull-uped with 2.2k
18 I2C1-SDA RIIC1_SDA Camera confguration I2C interface (3.3V), pull-uped with 2.2k
19 GND - -
20 CSI-GPIO0 P17-0 Auxiliary GPIO
21 CSI-GPIO1 P17-1 Auxiliary GPIO
22 - - -
23 GND - -
24 +3.3V - Power supply for external devices
25 +3.3V - Power supply for external devices
26 +5V - Power supply for external devices
27 +5V - Power supply for external devices
28 - - -
29 - - -
30 GND - -

Note:
1. The first pin of the MIPI-CSI connector is located in its upper part.

Display MIPI-DSI interface (FPC/FFC30, 0.5mm)

VisionCB-x2L-STD-DSI.png
Pin Signal GPIO Description
1 GND -
2 DSI-CLK-P - -
3 DSI-CLK-P - -
4 GND - -
5 DSI-DATA0-P - -
6 DSI-DATA0-N - -
7 GND - -
8 DSI-DATA1-P - -
9 DSI-DATA1-N - -
10 GND - -
11 DSI-DATA2-P - -
12 DSI-DATA2-N - -
13 GND - -
14 DSI-DATA3-P - -
15 DSI-DATA3-N - -
16 GND - -
17 I2C1-SCL RIIC1_SCL Display confguration I2C interface (3.3V), pull-uped with 2.2k
18 I2C1-SDA RIIC1_SDA Display confguration I2C interface (3.3V), pull-uped with 2.2k
19 GND - -
20 DISP-RST P13-2 Optional display reset signal
21 TP-INT P17-1 Optional touch-panel interrupt signal
22 TP-RST P17-2 Optional touch-panel reset signal
23 GND - -
24 +3.3V - Power supply for external devices
25 +3.3V - Power supply for external devices
26 +5V - Power supply for external devices
27 +5V - Power supply for external devices
28 DSI-BL-PWM P16-0 Optional PWM backlight signal
29 DSI-BL-EN P16-1 Optional ENABLE backlight signal
30 GND - -

Note:
1. The first pin of the MIPI-DSI connector is located in its upper part.

USB Console Port

VisionCB-x2L-STD-console.png
Console line Signal GPIO Description
CONSOLE-TXD UART0-TXD P38-0 GPIO 3.3V voltage levels
CONSOLE-RXD UART0-RXD P38-1 GPIO 3.3V voltage levels

ADC + GPIO connector

VisionCB-x2L-STD-ADC.png


Pin Signal GPIO Description
1 GND - -
2 3.3V - -
3 ADC-CH0 ADC-CH0 Dedicated analog input, 12-bit ADC, max. 1.8V on input
4 ADC-CH1 ADC-CH1 Dedicated analog input, 12-bit ADC, max. 1.8V on input
5 ADC-CH2 ADC-CH2 Dedicated analog input, 12-bit ADC, max. 1.8V on input
6 ADC-CH3 ADC-CH3 Dedicated analog input, 12-bit ADC, max. 1.8V on input
7 ADC-CH4 ADC-CH4 Dedicated analog input, 12-bit ADC, max. 1.8V on input
8 ADC-CH5 ADC-CH5 Dedicated analog input, 12-bit ADC, max. 1.8V on input
9 ADC-CH6 ADC-CH6 Dedicated analog input, 12-bit ADC, max. 1.8V on input
10 ADC-CH7 ADC-CH7 Dedicated analog input, 12-bit ADC, max. 1.8V on input
11 P12-0 P12-0 GPIO 3.3 voltage levels
12 P13-1 P13-1 GPIO 3.3 voltage levels
13 P7-2 P7-2 GPIO 3.3 voltage levels
14 P11-0 P11-0 GPIO 3.3 voltage levels
15 P48-2 P48-2 GPIO 3.3 voltage levels
16 P4-1 P4-1 GPIO 3.3 voltage levels
17 CAN1-RX P13-0 GPIO 3.3 voltage levels
18 CAN1-TX P12-1 GPIO 3.3 voltage levels

Raspberry Pi compatible I/O header

VisionCB-x2L-STD-GPIO.png
Pin Signal MPU signal Description
1 3.3V - -
2 5.0V - -
3 I2C0-SDA RIIC0_SDA Dedicated I2C MPU line
4 5.0V - -
5 I2C0-SCL RIIC0_SCL Dedicated I2C MPU line
6 GND - -
7 P45-0 P45-0 GPIO 3.3 voltage levels
8 UART4-TXD P2-0 GPIO 3.3 voltage levels
9 GND - -
10 UART4-RXD P2-1 GPIO 3.3 voltage levels
11 P8-2 P8-2 GPIO 3.3 voltage levels
12 P15-0 P15-0 GPIO 3.3 voltage levels
13 P14-1 P14-1 GPIO 3.3 voltage levels
14 GND - -
15 P14-0 P14-0 GPIO 3.3 voltage levels
16 UART1-RXD P40-0 GPIO 3.3 voltage levels
17 P11-1 P11-1 GPIO 3.3 voltage levels
18 UART1-TXD P40-1 GPIO 3.3 voltage levels
19 SPI0-MOSI P43-1 GPIO 3.3 voltage levels
20 GND - -
21 SPI0-MISO P43-2 GPIO 3.3 voltage levels
22 P9-1 P9-1 GPIO 3.3 voltage levels
23 SPI0-CLK P43-0 GPIO 3.3 voltage levels
24 SPI0-SSL P43-3 GPIO 3.3 voltage levels
25 GND - -
26 P9-0 P9-0 GPIO 3.3 voltage levels
27 I2C3-SDA P46-2 I2C interface used być MPU for SOM PMIC configuration
28 I2C3-SCL P46-3 I2C interface used być MPU for SOM PMIC configuration
29 UART1-CTS P41-0 GPIO 3.3 voltage levels
30 GND - -
31 UART1-RTS P41-1 GPIO 3.3 voltage levels
32 P1-1 P1-1 GPIO 3.3 voltage levels
33 P10-1 P10-1 GPIO 3.3 voltage levels
34 GND - -
35 SPI1-MISO P44-2 GPIO 3.3 voltage levels
36 SPI1-SSL P44-3 GPIO 3.3 voltage levels
37 P10-0 P10-0 GPIO 3.3 voltage levels
38 SPI1-MOSI P44-1 GPIO 3.3 voltage levels
39 GND - -
40 SPI1-CLK P44-0 GPIO 3.3 voltage levels

Serial Communication/GPIO header (J305)

VisionCB-8Mmini-serialcommGPIO.png


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 GPIO5-IO23 Universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as touch-panel interrupt line (with 47k pull-up)
3 UART2-CTS By default: UART2-CTS or universal GPIO with 3.3V logic levels
4 SAI3-TXFS By default: SAI3-TXFS or universal GPIO with 3.3V logic levels
Connected to MIPI-CSI (J302)
5 UART2-RTS By default: UART2-RTS or universal GPIO with 3.3V logic levels
6 SAI3-TXC By default: SAI3-TXC or universal GPIO with 3.3V logic levels
Connected to MIPI-CSI (J302)
7 UART2-RXD By default: UART2-RXD or universal GPIO with 3.3V logic levels
8 SAI3-TXD By default: SAI3-TXD or universal GPIO with 3.3V logic levels
9 UART2-TXD By default: UART2-TXD or universal GPIO with 3.3V logic levels
10 SAI3-RXFS By default: SAI3-RXFS or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as display module reset signal
11 I2C2-SCL By default: I2C2-SCL or universal GPIO with 3.3V logic levels
Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
12 SAI3-MCLK By default: SAI3-MCLK or universal GPIO with 3.3V logic levels
13 I2C2-SDA By default: I2C2-SDA or universal GPIO with 3.3V logic levels
Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
14 SPDIF-TX By default: SPDIC-TX or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as touch-panel reset signal
15 I2C3-SCL By default: I2C3-SCL or universal GPIO with 3.3V logic levels
16 SPDIF-RX By default: I2C3-SCL or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as display module PWM backlight control
17 I2C3-SDA By default: I2C3-SDA or universal GPIO with 3.3V logic levels
18 SPDIF-CLK By default: SPDIF-CLK or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as display module on/off signal
19 GND -
20 GND -

User Interface (switches and LEDs)

VisionCB-8Mmini-userinterface.png


User switches

Switch GPIO Description
S305 (black, most on the left) GPIO4-IO03 47k pull-up
S304 GPIO4-IO02 47k pull-up
S303 GPIO4-IO01 47k pull-up
S302 (black, most on the right) GPIO4-IO00 47k pull-up


System switches

Switch Signal name Description
S301 (left, red) Reset -
S300 (right, red) BOOT-RECOVERY -


User LEDs

LED GPIO Description
D303 (most on the left) GPIO4-IO04 User LED1, buffered with inverter
D302 GPIO4-IO05 User LED2, buffered with inverter
D301 GPIO4-IO06 User LED3, buffered with inverter
D300 (most on the right) GPIO4-IO07 User LED4, buffered with inverter


System LEDs

LED GPIO Description
D304 SYS-LED System function monitoring
D305 - Power LED (3.3V)


Dimensions

VisionCB-x2L-STD-dimensions.png
Retrieved from "https://wiki.somlabs.com/index.php?title=VisionCB-x2L-STD_Datasheet_and_Pinout&oldid=3737"
NXP Partner ST Partner Renesas Partner