Difference between revisions of "VisionSOM-RT117x"
From SomLabs Wiki
| Line 25: | Line 25: | ||
|content= | |content= | ||
'''Development tutorials''' | '''Development tutorials''' | ||
| − | *[[ | + | *[[How_to_create_and_run_the_first_FreeRTOS_application_on_the_VisionSOM-RT1176|How to create and run the first FreeRTOS application on the VisionSOM-RT1176]] |
}} | }} | ||
}} | }} | ||
Revision as of 09:49, 19 April 2024
| VisionSOM-RT117x |
|
VisionSOM-RT117x is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects. VisionSOM-RT117x can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated carrier board. Customers who are looking for a complete solution can use a set comprised of System on Module (SoM) and Carrier Board (CB). VisionSOM-RT requires a matching customer’s board or a carrier board to establish a complete system. Carrier Board together with VisionSOM-RT117x is ready to use computer on board and is giving enormous flexibility in building projects. |
Documentation
How to
Development tutorials
| Specifications |
| CPU | NXP i.MX RT117x dual core Cortex-M7+Cortex-M4 32-bit processor |
| Memory | 2MB on-chip RAM, up to 128MB SDRAM |
| GPU | NXP PXP 2D graphics accelerator for LCD-TFT |
| Display | 24-bit RGB parallel interface |
| Storage | 4...32MB QSPI Flash |
| I2C | up to 6 channels |
| SPI | up to 6 channels |
| CAN | up to 3 FlexCAN |
| UART | up to 12 channels |
| USB | 2 x USB2.0 OTG |
| Audio | 4 x I2S/SAI |
| Temperature Range | -40 to +85°C |
| Dimensions | 67mm x 32mm x 6,8mm SODIMM200 module |
