Personal tools

VisionCB-RT1176-STD: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
No edit summary
No edit summary
Line 9: Line 9:
|cb_switches=4+1 (reset)
|cb_switches=4+1 (reset)
|cb_leds=4 + 1 (power)
|cb_leds=4 + 1 (power)
|cb_connectors= 2 sections of GPIO
|cb_connectors= 3 sections of GPIO
|cb_rtc_backup=CR2032 battery
|cb_rtc_backup=CR2032 battery
|cb_power_supply=External 9-12V DC
|cb_power_supply=External 9-12V DC
Line 19: Line 19:
|
|
content= 
content= 
*[[VisionCB-RT-STD v.1.0 Datasheet and Pinout|VisionCB-RT-STD v.1.0 Datasheet and Pinout]]
*[[VisionCB-RT1176-STD v.1.2 Datasheet and Pinout|VisionCB-RT1176-STD v.1.2 Datasheet and Pinout]]
__WP_Files(5176)
__WP_Files(5176)
}}  
}}  
}}
}}

Revision as of 11:21, 1 July 2024

VisionCB-RT1176-STD
VisionCB-RT1176-STD VisionCB-RT1176-STD is a carrier board for the VisionSOM-RT1170 family of computer-on-modules which are powered by NXP i.MX RT1170x application processors. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as audio codec, USB, Ethernet, UART, RS485, CAN etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
Specifications
SOM compatibilityVisionSOM-RT module with NXP i.MX-RT117x microcontroller
SOM socketSODIMM200
Display connectorMIPI-DSI (FPC30)
Network1x Ethernet 10/100/1000 Mbit/s, RJ45
USBUSB 2.0 host x1, USB-OTG 2.0 x1
DebuggerJTAG connector for external debugger
Console interfaceSWDAP and vCOM (console port)
Switches4+1 (reset)
LEDs4 + 1 (power)
Connectors3 sections of GPIO
RTC BackupCR2032 battery
Power supplyExternal 9-12V DC
Dimensions145mm x 90mm x 17mm