StarCB-STM32H757-STD: Difference between revisions
From SomLabs Wiki
Created page with "{{Product|category1=SOM|category2=|image=StarCB-STM32H757-STD.png |cb_som_compatibility=StarSOM-STM32H757 module with STM32H757 microcontroller |cb_som_socket=Square b2b |cb_display_connector=MIPI-DSI (FPC30) |cb_network=1x Ethernet 10/100/1000 Mbit/s, RJ45 |cb_usb=USB 2.0 host x1, USB-OTG 2.0 x1 |cb_debugger=JTAG connector for external debugger |cb_console_interface=SWDAP and vCOM (console port) |cb_switches=4+1 (reset) |cb_leds=4 + 1 (power) |cb_connectors= 3 sections..." |
No edit summary |
||
| Line 13: | Line 13: | ||
|cb_power_supply=External 9-12V DC | |cb_power_supply=External 9-12V DC | ||
|dim=160mm x 100mm x 22mm | |dim=160mm x 100mm x 22mm | ||
|description= | |description=StarCB-STM32H757-STD is a carrier board for the StarSOM-STM32H757 family of computer-on-modules, which are powered by STM32H757 MCU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as audio codec, USB, Ethernet, UART, RS485, CAN, ST-Link debugger etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br> | ||
|documentation= | |documentation= | ||
Revision as of 15:01, 11 February 2026
| StarCB-STM32H757-STD |
|
StarCB-STM32H757-STD is a carrier board for the StarSOM-STM32H757 family of computer-on-modules, which are powered by STM32H757 MCU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as audio codec, USB, Ethernet, UART, RS485, CAN, ST-Link debugger etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. |
| Specifications |
| SOM compatibility | StarSOM-STM32H757 module with STM32H757 microcontroller |
| SOM socket | Square b2b |
| Display connector | MIPI-DSI (FPC30) |
| Network | 1x Ethernet 10/100/1000 Mbit/s, RJ45 |
| USB | USB 2.0 host x1, USB-OTG 2.0 x1 |
| Debugger | JTAG connector for external debugger |
| Console interface | SWDAP and vCOM (console port) |
| Switches | 4+1 (reset) |
| LEDs | 4 + 1 (power) |
| Connectors | 3 sections of GPIO |
| RTC Backup | CR2032 battery |
| Power supply | External 9-12V DC |
| Dimensions | 160mm x 100mm x 22mm |
