VisionCB-RT1176-STD: Difference between revisions
From SomLabs Wiki
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Product|category1=SOM|category2=|image=VisionCB- | {{Product|category1=SOM|category2=|image=VisionCB-RT1176-STD.png | ||
|cb_som_compatibility=StarSOM-STM32H757 module with STM32H757 microcontroller | |cb_som_compatibility=StarSOM-STM32H757 module with STM32H757 microcontroller | ||
|cb_som_socket=Square b2b | |cb_som_socket=Square b2b | ||
Revision as of 14:55, 11 February 2026
| VisionCB-RT1176-STD |
|
StarCBSTM32H757-STD is a carrier board for the StarSOM-STM32H757 family of computer-on-modules, which are powered by STM32H757 MCU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as audio codec, USB, Ethernet, UART, RS485, CAN, ST-Link debugger etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. |
| Specifications |
| SOM compatibility | StarSOM-STM32H757 module with STM32H757 microcontroller |
| SOM socket | Square b2b |
| Display connector | MIPI-DSI (FPC30) |
| Network | 1x Ethernet 10/100/1000 Mbit/s, RJ45 |
| USB | USB 2.0 host x1, USB-OTG 2.0 x1 |
| Debugger | JTAG connector for external debugger |
| Console interface | SWDAP and vCOM (console port) |
| Switches | 4+1 (reset) |
| LEDs | 4 + 1 (power) |
| Connectors | 3 sections of GPIO |
| RTC Backup | CR2032 battery |
| Power supply | External 9-12V DC |
| Dimensions | 160mm x 100mm x 22mm |
