VisionSOM-6UL

VisionSOM-6UL

VisionSOM-6UL is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects. VisionSOM-6UL can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated carrier board. Customers who are looking for a complete solution can use a set comprised of System on Module (SoM) and Carrier Board (CB). VisionSOM-6UL requires a matching customer’s board or a carrier board to establish a complete system. Carrier Board together with VisionSOM-UL is ready to use computer on board and is giving enormous flexibility in building projects.

Documentation

• Datasheet and Pinout

Yocto

Yocto

• Yocto for VisionSOM-6ULL/6UL

Debian

Debian Developer Guide

• Debian Stretch 9.2 (4.1.15) for VisionSOM-6ULL

Buildroot

Buildroot Developer Guide

• Developer Guide

Projects

Projects

• Hardware-accelerated video playback on the VisionSOM-6ULL (GStreamer with support for PxP engine)

Specifications

CPU	NXP i.MX6UL Cortex-A7 32-bit processor (CPU clock up to 696MHz)
Memory	up to 512MB DDR3L
GPU	NXP PXP v2.0 2D graphics accelerator for LCD-TFT
Display	24-bit RGB parallel interface
Camera	up to 24-bit CSI interface
Storage	uSD card or up to 32GB eMMC or up to 512MB NAND Flash
Network	Wi-Fi 802.11b/g/n, Bluetooth BLE 2 x Ethernet: 10/100 (MAC only)
RTC	built-in with external battery
I2C	up to 4 channels
SPI	up to 4 channels
CAN	up to 2 FlexCAN
UART	up to 8 channels
USB	2 x USB2.0 OTG Host/Device
Audio	3 x I2S S/PDIF Tx/Rx
Security	Crypto Engine (AES/TDES/SHA) Secure Boot TRNG
Temperature Range	-30 to +70°C (with WiFi/BLE module), -40 to +85°C
Dimensions	67mm x 32mm x 4mm SODIMM200 module