VisionCB-IND Datasheet and Pinout

VisionCB-IND Datasheet and Pinout

---

General description

VisionCB-IND is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector.

Applications

• Industrial embedded Linux computer
• Home Appliances
• Home Automation – Smart Home
• Human-machine Interfaces (HMI)
• Point-of-sales (POS) terminals
• Cash Register
• 2D barcode scanners and printers
• Smart grid Infrastructure
• IoT gateways
• Residential getaways
• Machine vision equipment
• Robotics
• Fitness/outdoor equipment

Features

• Industrial grade Carrier Board (Base Board) compatible with the VisionSOM family of modules based on NXP i.MX 6UL / 6ULL application processors
• Core clock up to 696MHz (VisionSOM-6UL) or up to 900MHz (VisionSOM-6ULL)
• Up to 512MB SDRAM DDR3L (depends on used VisionSOM module)
• Up to 512MB NAND Flash / 32GB eMMC / uSD memory card (depends on used VisionSOM module)
• Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.1+EDR module
• SoM Interface: SODIMM200
• Expansion Connectors:
  • 2x25 Pin Headers (Female)
  • microSD Card socket
• Communication Connectors:
  • 1x Ethernet 10/100Mbit/s, RJ45
  • 2x USB Host Type A connectors
  • 1x USB OTG Micro AB connector
• Display Interface: 50-pin FFC/FPC Parallel RGB – 24-bit, (1366 x 768 Max. Resolution)
• Embedded Real-Time Clock (RTC)
• Power Supply
  • Termina block connector: Input Voltage 9-12V DC
• Temperature Range: 0 to +70°C
• Board Size: 98mm x 79mm x 22mm

Pictures of VisionCB-IND board

Version	Photo
VisionCB-IND board only
VisionCB-IND board with VisionSOM-6ULL

Ordering info

VisionCB-IND

Block Diagram

Electrical parameters

Parameter	Value			Units	Comment
	Min.	Typ.	Max.
Power Supply (Con100 input)	11.0	12.0	15.0	V	Positive pole on central connector of J100
Supply current	-	-	0.15	A	Excluding LCD, USB and antoher external loads
Input GPIO voltage (J405)	0	-	3.3	V	LCD-RGB connector

2x25 pin header

J504 Pin	Default function name	Description
1	CSI-HSYNC	?
2	CSI-VSYNC	?
3	CSI-DATA0	?
4	CSI-DATA2	?
5	CSI-DATA1	?
6	CSI-DATA3	?
7	CSI-DATA4	?
8	CSI-DATA5	?
9	CSI-MCLK	?
10	CSI-DATA7	?
11	ENET2_CRS_DV	Default: ENET2 CRS_DV line or universal GPIO with 3.3V logic levels.
12	GPIO5	Universal GPIO with 3.3V logic levels.
13	UART1-CTS	Default: UART1 CTS line or universal GPIO with 3.3V logic levels.
14	GND	-
15	ENET2_TXEN	Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels. UART1-RTS Default: UART1 RTS line or universal GPIO with 3.3V logic levels.
16	GPIO8	Universal GPIO with 3.3V logic levels.
17	VCC-3V3	+3.3V generated by internal SOM LDO converter (limited load current)
18	GPIO9	Universal GPIO with 3.3V logic levels.
19	UART2-CTS	Default: UART2 CTS line or universal GPIO with 3.3V logic levels.
20	GND	-
21	UART2-RTS	Default: UART2 RTS line or universal GPIO with 3.3V logic levels.
22	GPIO0	Universal GPIO with 3.3V logic levels.
23	UART2-RXD	Default: UART2 RXD input or universal GPIO with 3.3V logic levels.
24	UART2-TXD	Default: UART2 TXD input or universal GPIO with 3.3V logic levels.
25	GND	-
26	JTAG-TCK	Default: JTAG TCK input or universal GPIO with 3.3V logic levels.
27	-	-
28	JTAG-nTRST	Default: ??nTRST
29	ENET2_TX_CLK	Default: ENET2 TX_CLK line or universal GPIO with 3.3V logic levels.
30	JTAG-TMS	Default: JTAG TMS output or universal GPIO with 3.3V logic levels.
31	ENET2_RXER	Default: ENET2 RXER line or universal GPIO with 3.3V logic levels.
32	JTAG-MOD	Default: JTAG MOD input or universal GPIO with 3.3V logic levels.
33	UART3-CTS	Default: UART3 CTS line or universal GPIO with 3.3V logic levels.
34	GND	-
35	UART3-RTS	Default: UART3 RTS line or universal GPIO with 3.3V logic levels.
36	JTAG-TDO	Default: JTAG TDO output or universal GPIO with 3.3V logic levels.
37	ENET2_RXD1	Default: ENET2 RXD1 line or universal GPIO with 3.3V logic levels.
38	JTAG-TDI	Default: JTAG TDI input or universal GPIO with 3.3V logic levels.
39	GND	-
40
41	JTAG-TMS	Default: JTAG TMS output or universal GPIO with 3.3V logic levels.
42	JTAG-TMS	Default: JTAG TMS output or universal GPIO with 3.3V logic levels.
43	GPIO5	Default: General purpose pin
44	JTAG-TDI	Default: JTAG TDI input or universal GPIO with 3.3V logic levels.
45	GPIO8	Default: General purpose pin
46	GPIO9	Default: General purpose pin
47	VCC-3V3	+3.3V generated by internal SOM LDO converter (limited load current).
48	GND	-
49	VCC-3V3	+3.3V generated by internal SOM LDO converter (limited load current).
50	GND	-

TFT LCD connector (RGB 24b, J405)

File:VisionCB-IND-1-4-lcd.jpg

J400 pin	Default function name	LCD interface name
1	LCD-DATA0	LCD-B0
2	LCD-DATA1	LCD-B1
3	LCD-DATA2	LCD-B2
4	LCD-DATA3	LCD-B3
5	LCD-DATA4	LCD-B4
6	LCD-DATA5	LCD-B5
7	LCD-DATA6	LCD-B6
8	LCD-DATA7	LCD-B7
9	GND	GND
10	LCD-DATA8	LCD-G0
11	LCD-DATA9	LCD-G1
12	LCD-DATA10	LCD-G2
13	LCD-DATA11	LCD-G3
14	LCD-DATA12	LCD-G4
15	LCD-DATA13	LCD-G5
16	LCD-DATA14	LCD-G6
17	LCD-DATA15	LCD-G7
18	GND	GND
19	LCD-DATA16	LCD-R0
20	LCD-DATA17	LCD-R1
21	LCD-DATA18	LCD-R2
22	LCD-DATA19	LCD-R3
23	LCD-DATA20	LCD-R4
24	LCD-DATA21	LCD-R5
25	LCD-DATA22	LCD-R6
26	LCD-DATA23	LCD-R7
27	GND	GND
28	LCD-DE	DE
29	LCD-HSYNC	HSYNC
30	LCD-VSYNC	VSYNC
31	GND	GND
32	LCD-PCLK	DCLK
33	GND	GND
34	GPIO4	TS-YPUL
35	GPIO3	TS-YNUR
36	GPIO2	TS-YPLL
37	GPIO1	TS-YNLR
38	-	-
39	-	-
40	-	-
41	-	-
42	UART5-TXD	I2C-SCL
43	UART5-RXD	I2C-SDA
44	GND	GND
45	VCC-LCD	+3.3V (controlled by ENET2_TXEN)
46	VCC-LCD	+3.3V (controlled by ENET2_TXEN)
47	VCC-5V0	+5.0V
48	VCC-5V0	+5.0V
49	LCD-RESET	RESET
50	JTAG-nTRST	PWREN

Dimensions