VisionCB-6ULL-STD: Difference between revisions
From SomLabs Wiki
No edit summary |
No edit summary |
||
| Line 18: | Line 18: | ||
*[[VisionCB-6ULL-STD Datasheet and Pinout|VisionCB-6ULL-STD v.2.0 Datasheet and Pinout]] | *[[VisionCB-6ULL-STD Datasheet and Pinout|VisionCB-6ULL-STD v.2.0 Datasheet and Pinout]] | ||
__WP_Files(1425) | __WP_Files(1425) | ||
}}{{DocBox|boxwidth=21|system=Howto | |||
| | |||
content=  | |||
*[[VisionCB-STD Power Supply|VisionCB-STD Power Supply]] | |||
*[[VisionSOM-6ULL - USB recovery mode|VisionSOM-6ULL - USB recovery mode]] | |||
}} | }} | ||
}} | }} | ||
Revision as of 10:16, 31 October 2019
| VisionCB-6ULL-STD |
|
VisionCB-6ULL-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. |
Documentation
| Specifications |
| CPU | VisionSOM-6UL - System on Module with NXP i.MX6UL application procesor or VisionSOM-6ULL - System on Module with NXP i.MX6ULL application procesor |
| Memory | up to 512MB DDR3L (depends on used VisionSOM) |
| Display | 24-bit RGB parallel interface |
| Camera | up to 24-bit CSI interface |
| Storage | uSD card or up to 32GB eMMC or up to 512MB NAND Flash (depends on used VisionSOM) |
| Network | 1x Ethernet 10/100Mbit/s, RJ45 Wi-Fi 802.11b/g/n (depends on used VisionSOM) |
| USB | 2x USB2.0 OTG Host/Device |
| Temperature Range | 0 to +70°C |
| Dimensions | 130mm x 90mm x 17mm |
